Search NASA⌕ Search

SEARCH · Search NASA

Results for “optics in computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

A New Electrostatically-focused UV HPD for Liquid Xenon

Appropriate photodetectors are a major challenge for liquid xenon technology as proposed by the next generation of double beta decay, solar neutrino, and dark matter searches. The primary photon signal is tiny and in the hard ultraviolet, the installation is cryogenic, and the sensors themselves must not introduce background. Hybrid photodiodes (HPDs) provide an easy substitute for a conventional PMT with the added advantages of low radioactivity, better area coverage, and single photoelectron counting. A computer-controlled test setup capable of characterizing optical properties of ultraviolet photodetectors was installed. It was used to compare photomultiplier tubes, silicon photomultipliers, avalanche photodiodes, and a novel-design custom HPD developed by the DEP company under this proposal.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High Performance Perovskite-Based Solar Cells (Final Technical Report)

Hybrid lead-halide perovskite semiconductors have become one of the most heavily studied photovoltaic (PV) materials within the past ten years. However, these materials suffer from two key limitations that have ultimately limited the progression towards commercialization: (i) the inclusion of toxic lead (Pb) and (ii) instability towards moisture, oxygen, and temperature. This project has targeted the development of perovskite absorber materials that replace Pb with a benign alternative and that are stable under atmospheric conditions. Under this broad goal, the project had four major objectives: 1) Develop high-performance Pb-based PV devices and study alternative inorganic contact materials to improve the device stability; 2) Advance computational techniques to understand the electronic and optical properties of perovskite semiconductors from a theoretical perspective; 3) Explore various hybrid and inorganic halide, chalcohalide and chalcogenide perovskite absorbers as highly stable, Pb-free absorber alternatives; 4) Develop thin-film deposition and device fabrication methodologies to deposit high-quality Pb-free perovskite absorbers and high-performance devices. Within the first objective, the researchers fabricated high-performing methylammonium lead iodide solar cells based on both traditional architectures (using a TiO 2 contact) and inverted architectures using NiOx and novel CuCrO 2 as hole transport layers (HTL). The work with CuCrO 2 is the first work demonstrating CuCrO 2 as a promising contact material for future, stable perovskite solar cells. Towards the second objective researchers have calculated the intrinsic stability and optoelectronic properties of multiple Pb-free systems including chalcohalide (e.g. CsBiOF 2 ), halide (e.g. Cs 3 Sb 2 I 9 ), and chalcogenide perovskites (e.g. BaZr 1-x TixS 3 ). Additionally, the researchers have furthered the basic understanding of perovskite materials by introducing the concept of electronic dimensionality and its impact on optoelectronic properties. This understanding has had implications in PV applications and beyond. In the third and fourth objectives, the investigators have exhausted a myriad of Pb-free materials in search of a stable, promising Pb-free perovskite absorber, including chalochalides based on CsBiOF 2 , Pb-free halides (such as Cs 2 AgBiBr 6 , Cs 2 TiBr 6 , and Cs(Ge/Sn)I 3 ) , chalcogenide perovskites (e.g. BaZrS 3 ), and perovskite-related halides InI and silver bismuth iodide. While the researchers have studied many promising perovskites and perovskite-alternatives, a stable, high-performing Pb-free absorber has proven to be elusive.

14 SOLAR ENERGY↗

Recent Advances in Display Media

Properties and imaging techniques of various display devices - computer directed visual flight control boards, integrated optical man machine systems, and electro-optical methods

Source record↗

Laser display systems. II.

Holographic displays using ultrasonic vibrations or laser outputs as optical sources, discussing recording materials, responses and computer applications

Devaney, A. J.↗

Procedures and results related to the direct determination of gravity anomalies from satellite and terrestrial gravity data

The equations needed for the incorporation of gravity anomalies as unknown parameters in an orbit determination program are described. These equations were implemented in the Geodyn computer program which was used to process optical satellite observations. The arc dependent parameter unknowns, 184 unknown 15 deg and coordinates of 7 tracking stations were considered. Up to 39 arcs (5 to 7 days) involving 10 different satellites, were processed. An anomaly solution from the satellite data and a combination solution with 15 deg terrestrial anomalies were made. The limited data samples indicate that the method works. The 15 deg anomalies from various solutions and the potential coefficients implied by the different solutions are reported.

Rapp, R. H.↗

Monte Carlo simulation of wave sensing with a short pulse radar

A Monte Carlo simulation is used to study the ocean wave sensing potential of a radar which scatters short pulses at small off-nadir angles. In the simulation, realizations of a random surface are created commensurate with an assigned probability density and power spectrum. Then the signal scattered back to the radar is computed for each realization using a physical optics analysis which takes wavefront curvature and finite radar-to-surface distance into account. In the case of a Pierson-Moskowitz spectrum and a normally distributed surface, reasonable assumptions for a fully developed sea, it has been found that the cumulative distribution of time intervals between peaks in the scattered power provides a measure of surface roughness. This observation is supported by experiments.

Levine, D. M.↗

Econ's optimal decision model of wheat production and distribution-documentation

The report documents the computer programs written to implement the ECON optical decision model. The programs were written in APL, an extremely compact and powerful language particularly well suited to this model, which makes extensive use of matrix manipulations. The algorithms used are presented and listings of and descriptive information on the APL programs used are given. Possible changes in input data are also given.

Source record↗

Adjacency effects on imaging by surface reflection and atmospheric scattering - Cross radiance to zenith

The paper discusses an analytical solution for the nadir radiance as measured from a satellite, based on a simplified single-scattering approximation in which the scattered radiation is not subject to extinction. In the solution, terms can be identified as due to a reflection from the vicinity of the object pixel, and respectively, (1) upward scattering to zenith above the object pixel (cross radiance), and (2) downward scattering from the entire atmosphere to the object pixel (cross irradiance). It is shown that the cross radiance is proportional to the forward scattering optical thickness, as defined, and the cross irradiance to the backscattering optical thickness. In addition, explicit expressions and computer solutions for the cross radiance from annular or from rectangular reflecting areas are presented. It is concluded that the effect depends on the height distribution and on the sharpness of the forward peak of the scattering particles.

Otterman, J.↗

Laser-optical blade tip clearance measurement system

A laser-optical measurement system was developed to measure single blade tip clearances and average blade tip clearances between a rotor and its gas path seal in rotating component rigs and complete engines. The system is applicable to fan, compressor and turbine blade tip clearance measurements. The engine mounted probe is particularly suitable for operation in the extreme turbine environment. The measurement system consists of an optical subsystem, an electronic subsystem and a computing and graphic terminal. Bench tests and environmental tests were conducted to confirm operation at temperatures, pressures, and vibration levels typically encountered in an operating gas turbine engine.

Barranger, J. P.↗

Laser-optical blade tip clearance measurement system

The need for blade tip clearance instrumentation has been intensified recently by advances in technology of gas turbine engines. A new laser-optical measurement system has been developed to measure single blade tip clearances and average blade tip clearances between a rotor and its gas path seal in rotating component rigs and complete engines. The system is applicable to fan, compressor and turbine blade tip clearance measurements. The engine mounted probe is particularly suitable for operation in the extreme turbine environment. The measurement system consists of an optical subsystem, an electronic subsystem and a computing and graphic terminal. Bench tests and environmental tests were conducted to confirm operation at temperatures, pressures, and vibration levels typically encountered in an operating gas turbine engine.

Barranger, J. P.↗

Q0957+561 - Detailed models of the gravitational lens effect

The galaxy responsible for causing multiple gravitational lens images of QSO Q0957+561 has been reobserved spectroscopically and a more accurate redshift of 0.36 was obtained. In addition, detailed models of the gravitational lens effect were computed. These models, which can explain all optical and radio data for the system, predict delays of up to five years between variations in the A and B images (with A preceding B). It is suggested that the third image is rather faint and located close to the center of the lens galaxy; it is possible that this third image contributes to the observed galaxy core. The possibility that this system can be used to measure the Hubble constant is discussed.

Young, P.↗

A conceptual design study of point focusing thin-film solar concentrators

Candidates for reflector panel design concepts, including materials and configurations, were identified. The large list of candidates was screened and reduced to the five most promising ones. Cost and technical factors were used in making the final choices for the panel conceptual design, which was a stiffened steel skin substrate with a bonded, acrylic overcoated, aluminized polyester film reflective surface. Computer simulations were run for the concentrator optics using the selected panel design, and experimentally determined specularity and reflectivity values. Intercept factor curves and energy to the aperture curves were produced. These curves indicate that surface errors of 2 mrad (milliradians) or less would be required to capture the desired energy for a Brayton cycle 816 C case. Two test panels were fabricated to demonstrate manufacturability and optically tested for surface error. Surface errors in the range of 1.75 mrad and 2.2 mrad were measured.

Source record↗

Acoustic ground impedance meter

A method and apparatus are presented for measuring the acoustic impedance of a surface in which the surface is used to enclose one end of the chamber of a Helmholz resonator. Acoustic waves are generated in the neck of the resonator by a piston driven by a variable speed motor through a cam assembly. The acoustic waves are measured in the chamber and the frequency of the generated acoustic waves is measured by an optical device. These measurements are used to compute the compliance and conductance of the chamber and surface combined. The same procedure is followed with a calibration plate having infinite acoustic impedance enclosing the chamber of the resonator to compute the compliance and conductance of the chamber alone. Then by subtracting, the compliance and conductance for the surface is obtained.

Zuckerwar, A. J.↗

Performance of OOK and low-order PPM modulations in optical communications when using APD-based receivers

The paper computes direct detection laser communications receiver performance when using avalanche photodiode (APD) detectors. The performances are compared in terms of bit error probability vs average signal required per bit when the transmitter uses either on-off keying (OOK) or low-order PPM formats. It is shown that QPPM requires 3 dB less signal than OOK, while BPPM requires the same or slightly more than OOK for the same performance. Optimum APD gain values range from 200 to 400. When using QPPM, k(eff) = 0.006, and optimum gain, 60 signal counts/bit are required at 500 Mbits/s for a 0.000001 bit error probability. It is concluded that QPPM may be an attractive signaling format for some fiber or free space laser communication applications.

Abshire, J. B.↗

Near-optimum design of GaAs-based concentrator space solar cells for 80 C operation

Using a detailed computer simulation model and reasonable values of optical, geometrical and material parameters from current published literature, parameter optimization studies were performed on two cell geometries, namely, the circular geometry for a Cassegrainian concentrator with 100 AM0, 80 C operation and the rectangular geometry for a venetian blind concentrator with 20 AM0, 80 C operation. For each cell geometry, three cell configurations were considered: p/n AlGaAs/GaAs; n/p AlGaAs/GaAs; and, n/p GaAs shallow homojunction. The studies show the possibility of designing GaAs-based space solar cells with beginning-of-life efficiencies exceeding 22 percent at 20 to 100 AM0, 80 C and probable efficiency degradation of less than 15 percent after a 70 percent reduction in diffusion length in each cell region.

Goradia, C.↗

Particle phase function measurements by a new Fiber Array Nephelometer: FAN 1

A fiber array polar nephelometer of advanced design, the FAN I is capable of in-situ phase function measurements of scattered light from man-made or natural atmospheric particles. The scattered light is measured at 100 different angles throughout 360 degrees, thus providing a potential measurement of the asymmetry of irregularly shaped particles. Phase functions can be measured at 10 to 100 Hz rates and the range of measurable single particle sizes is from 5 micron m to as large as 8mm. For particles smaller than 5 micro m the ensemble average can be measured. The FAN I is microprocessor controlled and the data may be stored on floppy disk or printed out in tabular and/or graphical form. The optical head may be separated from the computer system for operation in field or adverse conditions. Examples of laboratory measured scattering phase functions obtained with the FAN I for spherical particles is given to illustrate its measurement capabilities.

Farmer, W. M.↗

Digital cartography of the planets - New methods, its status, and its future

A system has been developed that establishes a standardized cartographic database for each of the 19 planets and major satellites that have been explored to date. Compilation of the databases involves both traditional and newly developed digital image processing and mosaicking techniques, including radiometric and geometric corrections of the images. Each database, or digital image model (DIM), is a digital mosaic of spacecraft images that have been radiometrically and geometrically corrected and photometrically modeled. During compilation, ancillary data files such as radiometric calibrations and refined photometric values for all camera lens and filter combinations and refined camera-orientation matrices for all images used in the mapping are produced. The system is designed to aid in the following: access to and utilization of spatial data returned by planetary spacecraft; coregistration of cartographic image and topographic elevation models with geological, geophysical, and geochemical databases; and the design and preparation of both standard and custom map products. A major goal of the project is to publish the DIMs on compact computer-compatible media such as digital-optical (CD-ROM) disks.

Batson, R. M.↗