Search NASA⌕ Search

SEARCH · Search NASA

Results for “sampling methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Investigation of the iron site localization in doped ZnO

Iron doped (5%) ZnO powders were prepared by hydrothermal and combustion methods. Subsequent heating treatments on these samples were performed under air and also under a reductive atmosphere. Powder XRD, Moessbauer spectroscopy and magnetization studies were used to characterize the products and investigate the localization of iron ions in the ZnO lattice. It was shown that a mixture with a ZnFe{sub 2}O{sub 4} type phase was obtained when the sample was prepared by the hydrothermal method, while Fe{sup 3+} occupy tetrahedral sites of the ZnO lattice in the case of the sample obtained by the combustion method. The magnetic measurements show that no ferromagnetism was detected in the iron doped ZnO compound, neither in the as prepared state nor after reduction. - Graphical abstract: Zn{sub 0.95}Fe{sub 0.05}O obtained by a combustion method and after reduction under hydrogen atmosphere. Highlights: Black-Right-Pointing-Pointer Iron doped ZnO was successfully synthesized by a combustion method. Black-Right-Pointing-Pointer The Fe{sup 3+} tetrahedral coordination was deduced from Moessbauer results. Black-Right-Pointing-Pointer The wurtzite structure was maintained after partial reduction of Fe{sup 3+} to Fe{sup 2+}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid Analysis of Inorganic Species in Herbaceous Materials Using Laser-Induced Breakdown Spectroscopy [plus supplemental information]

Inorganic compounds in biomass, often referred to as ash, are known to be problematic in the thermochemical conversion of biomass to bio-oil or syngas and, ultimately, hydrocarbon fuels because they negatively influence reaction pathways, contribute to fouling and corrosion, poison catalysts, and impact waste streams. The most common ash-analysis methods, such as inductively coupled plasma-optical emission spectrometry/mass spectrometry (ICP-OES/MS), require considerable time and expensive reagents. Laser-induced breakdown spectroscopy (LIBS) is emerging as a technique for rapid analysis of the inorganic constituents in a wide range of biomass materials. This study compares analytical results using LIBS data to results obtained from three separate ICP-OES/MS methods for 12 samples, including six standard reference materials. Analyzed elements include aluminum, calcium, iron, magnesium, manganese, phosphorus, potassium, sodium, and silicon, and results show that concentrations can be measured with an uncertainty of approximately 100 parts per million using univariate calibration models and relatively few calibration samples. These results indicate that the accuracy of LIBS is comparable to that of ICP-OES methods and indicate that some acid-digestion methods for ICP-OES may not be reliable for Na and Al. These results also demonstrate that germanium can be used as an internal standard to improve the reliability and accuracy of measuring many elements of interest, and that LIBS can be used for rapid determination of total ash in biomass samples. Key benefits of LIBS include little sample preparation, no reagent consumption, and the generation of meaningful analytical data instantaneously.

09 BIOMASS FUELS↗

When does atomic resolution plan view imaging of surfaces work?

We present that surface structures that are different from the corresponding bulk, reconstructions, are exceedingly difficult to characterize with most experimental methods. Scanning tunneling microscopy, the workhorse for imaging complex surface structures of metals and semiconductors, is not as effective for oxides and other insulating materials. This paper details the use of transmission electron microscopy plan view imaging in conjunction with image processing for solving complex surface structures. We address the issue of extracting the surface structure from a weak signal with a large bulk contribution. This method requires the sample to be thin enough for kinematical assumptions to be valid. The analysis was performed on two sets of data, c(6×2) on the (100) surface and (3×3) on the (111) surface of SrTiO 3 , and was unsuccessful in the latter due to the thickness of the sample and a lack of inversion symmetry. In conclusion, the limits and the functionality of this method are discussed.

36 MATERIALS SCIENCE↗

Data Trend Shifts Induced by Method of Concentration for Trace Metals in Seawater: Automated Online Preconcentration vs Borohydride Reductive Coprecipitation of Nearshore Seawater Samples for Analysis of Ni, Cu, Zn, Cd, and Pb via ICP-MS

This research compares performance, reproducibility, and detection limits of ambient seawater analysis for trace metals using both borohydride reductive co-precipitation and an automated chelation column (seaFAST™ 2) co-preconcentration for matrix interferent elimination on total and dissolved grab samples in nearshore to marine waters, over a broad concentration range, prior to ICP-MS injection. A move to an online preconcentration method both minimizes sample preparation, and eliminates correction errors when accounting for trace impurities in precipitated samples, induced via reagents. The reproducability of the online preconcentration method described, coupled with low blanks and method detection limits (MDLs), demonstrates an effective move to an automated procedure using ethylenediaminetriacetic and iminodiacetate acid chelation exchange resin and multi-analyte determination via ICP-MS for total and dissolved Ni, Cu, Zn, Cd, and Pb in marine water samples. Average CASS-5 recoveries using the online preconcentration method (n=9) were 109±7%, 104±5%, 103±7%, 101±3%, and 86±8% respectively. The MDLs obtained from the automated method for Ni, Cu, Zn, Cd and Pb were 3.3, 1.8, 13.5, 4, and 10 times lower, respectively, than for the Borohydride method. There were statistically significant differences between the methods for CASS-5 recoveries of Ni, Cu, Zn (p < 0.0001), and Pb (p = 0.0024). Comparison of methods gave high concordance (rC = 0.90) between methods for total and dissolved Ni, Cu, Zn, and Pb, and total Cd.

seaFAST, borohydride, seawater, Ethylenediaminetet↗

XPS guide: Charge neutralization and binding energy referencing for insulating samples

This guide deals with methods to control surface charging during XPS analysis of insulating samples and approaches to extracting useful binding energy information. Furthermore, the guide summarizes the causes of surface charging, how to recognize when it occurs, approaches to minimize charge buildup, and methods used to adjust or correct XPS photoelectron binding energies when charge control systems are used. Additionally, there are multiple ways to control surface charge buildup during XPS measurements and examples of systems on advanced XPS instruments are described. There is no single, simple, and foolproof way to extract binding energies on insulating material, but advantages and limitations of several approaches are described. Because of the variety of approaches and limitations of each it is critical for researchers to accurately describe the procedures that have been applied in research reports and publications.

47 OTHER INSTRUMENTATION↗

Towards a novel stellar opacity measurement scheme using stability properties of double ablation front structures

A novel method for bringing sample elements to hydrodynamic conditions relevant to the base of the solar convection zone is investigated. The method is designed in the framework of opacity measurements and exploits the temporal and spatial stability of hydrodynamic parameters in counter-propagating Double Ablation Front (DAF) structures. The physics of symmetric DAF structures is first studied in 1D geometries to assess the influence of tracer layers in the target. These results are used to propose an experimental design compatible with the OMEGA [Boehly et al., Opt. Commun. 133(1-6), 495–506 (1997)] laser. Radiative-hydrodynamic simulations conducted using the Chic code [Breil et al., Comput. Fluids 46, 161–167 (2011).] in 2D-axisymmetric geometries suggest that a Fe sample can be brought to an electron temperature of ∼160 eV and electron number density of ∼1.35 × 1023 cm−3. These parameters are reached during a 500 ps window with temporal variations of the order of 10 eV and 1022 cm−3, respectively. This allows for potential time-integrated spectral measurements. During that time, the sample is almost at local thermal equilibrium and 2D spatial gradients in the sample are less than 5% in a 360 μm diameter cylindrical volume, including the potential effects of Hot Electrons (HE) and typical uncertainties related to target fabrication and laser performances. The effects of HEs are assessed using an inline model in Chic. The HEs are found to deposit most of their energy in the cold and dense ablator between the two fronts, leading to a small efficiency loss on the DAF parameters. The calculations also suggest that negligible amounts of unabsorbed HEs are present in the probed volume, thus not affecting the atomic properties of the sample. Potential extensions of the current design to higher sample temperatures within the OMEGA capabilities are briefly discussed.

Colaïtis, A.↗

A simple differential steady-state method to measure the thermal conductivity of solid bulk materials with high accuracy

Accurate measurements of thermal conductivity are of great importance for materials research and development. Steady-state methods determine thermal conductivity directly from the proportionality between heat flow and an applied temperature difference (Fourier Law). Although theoretically simple, in practice, achieving high accuracies with steady-state methods is challenging and requires rather complex experimental setups due to temperature sensor uncertainties and parasitic heat loss. We developed a simple differential steady-state method in which the sample is mounted between an electric heater and a temperature-controlled heat sink. Our method calibrates for parasitic heat losses from the electric heater during the measurement by maintaining a constant heater temperature close to the environmental temperature while varying the heat sink temperature. This enables a large signal-to-noise ratio which permits accurate measurements of samples with small thermal conductance values without an additional heater calibration measurement or sophisticated heater guards to eliminate parasitic heater losses. Additionally, the differential nature of the method largely eliminates the uncertainties of the temperature sensors, permitting measurements with small temperature differences, which is advantageous for samples with high thermal conductance values and/or with strongly temperature-dependent thermal conductivities. In order to accelerate measurements of more than one sample, the proposed method allows for measuring several samples consecutively at each temperature measurement point without adding significant error. We demonstrate the method by performing thermal conductivity measurements on commercial bulk thermoelectric Bi 2 Te 3 samples in the temperature range of 30–150 °C with an error below 3%.

47 OTHER INSTRUMENTATION↗

Performance Evaluation of Fast Microfluidic Thermal Lysis of Bacteria for Diagnostic Sample Preparation

Development of new diagnostic platforms that incorporate lab-on-a-chip technologies for portable assays is driving the need for rapid, simple, low cost methods to prepare samples for downstream processing or detection. An important component of the sample preparation process is cell lysis. In this work, a simple microfluidic thermal lysis device is used to quickly release intracellular nucleic acids and proteins without the need for additional reagents or beads used in traditional chemical or mechanical methods (e.g., chaotropic salts or bead beating). On-chip lysis is demonstrated in a multi-turn serpentine microchannel with external temperature control via an attached resistive heater. Lysis was confirmed for Escherichia coli by fluorescent viability assay, release of ATP measured with bioluminescent assay, release of DNA measured by fluorometry and qPCR, as well as bacterial culture. Results comparable to standard lysis techniques were achievable at temperatures greater than 65 °C and heating durations between 1 and 60 s.

lab-on-a-chip↗

Controllable Thin‐Film Approaches for Doping and Alloying Transition Metal Dichalcogenides Monolayers

Abstract Two‐dimensional (2D) transition metal dichalcogenides (TMDs) exhibit exciting properties and versatile material chemistry that are promising for device miniaturization, energy, quantum information science, and optoelectronics. Their outstanding structural stability permits the introduction of various foreign dopants that can modulate their optical and electronic properties and induce phase transitions, thereby adding new functionalities such as magnetism, ferroelectricity, and quantum states. To accelerate their technological readiness, it is essential to develop controllable synthesis and processing techniques to precisely engineer the compositions and phases of 2D TMDs. While most reviews emphasize properties and applications of doped TMDs, here, recent progress on thin‐film synthesis and processing techniques that show excellent controllability for substitutional doping of 2D TMDs are reported. These techniques are categorized into bottom–up methods that grow doped samples on substrates directly and top–down methods that use energetic sources to implant dopants into existing 2D crystals. The doped and alloyed variants from Group VI TMDs will be at the center of technical discussions, as they are expected to play essential roles in next‐generation optoelectronic applications. Theoretical backgrounds based on first principles calculations will precede the technical discussions to help the reader understand each element's likelihood of substitutional doping and the expected impact on the material properties.

36 MATERIALS SCIENCE↗

Oxygen K -edge X-ray absorption spectra of liquids with minimization of window contamination

We report oxygen K-edge X-ray absorption spectroscopy is used routinely to study a range of solid materials. However, liquid samples are studied less frequently at the oxygen K-edge due to the combined challenges of high-vacuum conditions and oxygen contamination of window materials. A modular sample holder design with a twist-seal sample containment system that provides a simple method to encapsulate liquid samples under high-vacuum conditions is presented. This work shows that pure silicon nitride windows have lower oxygen contamination than both diamond- and silicon-rich nitride windows, that the levels of oxygen contamination are related to the age of the windows, and provides a protocol for minimizing the background oxygen contamination. Acid-washed 100 nm-thick silicon nitride windows were found to give good quality oxygen K-edge data on dilute liquid samples.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Enhanced Uranium Ore Concentrate Analysis by Handheld Raman Sensor: FY15 Status Report

High-purity uranium ore concentrates (UOC) represent a potential proliferation concern. A cost-effective, “point and shoot” in-field analysis capability to identify ore types, phases of materials present, and impurities, as well as estimate the overall purity would be prudent. Handheld, Raman-based sensor systems are capable of identifying chemical properties of liquid and solid materials. While handheld Raman systems have been extensively applied to many other applications, they have not been broadly studied for application to UOC, nor have they been optimized for this class of chemical compounds. PNNL was tasked in Fiscal Year 2015 by the Office of International Safeguards (NA-241) to explore the use of Raman for UOC analysis and characterization. This report summarizes the activities in FY15 related to this project. The following tasks were included: creation of an expanded library of Raman spectra of a UOC sample set, creation of optimal chemometric analysis methods to classify UOC samples by their type and level of impurities, and exploration of the various Raman wavelengths to identify the ideal instrument settings for UOC sample interrogation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Efficient sampling of free energy landscapes with functions in Sobolev spaces

Molecular simulations of biological and physical phenomena generally involve sampling complicated, rough energy landscapes characterized by multiple local minima. In this work, we introduce a new family of methods for advanced sampling that draw inspiration from functional representations used in machine learning and approximation theory. As shown here, such representations are particularly well suited for learning free energies using artificial neural networks. As a system evolves through phase space, the proposed methods gradually build a model for the free energy as a function of one or more collective variables, from both the frequency of visits to distinct states and generalized force estimates corresponding to such states. Implementation of the methods is relatively simple and, more importantly, for the representative examples considered in this work, they provide computational efficiency gains of up to several orders of magnitude over other widely used simulation techniques.

Approximation theory↗

Entropy-driven Optimal Sub-sampling of Fluid Dynamics for Developing Machine-learned Surrogates

Optimal sub-sampling of large datasets from fluid dynamics simulations is essential for training reduced-order machine learned models. A method using Shannon entropy was developed to weight flow features according to their level of information content, such that the most informative features can be extracted and used for training a surrogate model. The method is demonstrated in the canonical flow over a cylinder problem simulated with OpenFOAM. Both time-independent predictions and temporal forecasting were investigated as well as two types of prediction targets: local per-grid-point predictions and global per-time-step predictions. When tested on training a surrogate model, results indicate that our entropy-based sampling method typically outperforms random sampling and yields more reproducible results in less iterations. Finally, the method was used to train a surrogate model for modeling turbulence in magnetohydrodynamic flows, which revealed various challenges and opportunities for future research.

Brewer, Wes↗

Identifying crystallographic faces of the fluorites urania and thoria with rotational polarized Raman spectroscopy

Crystallite orientation identification is invaluable, but is often limited to small area identification or requires a large area sample. Nondestructive optical methods such as polarized Raman spectroscopy, in contrast, can be used to completely map a variety of sample sizes, but their potential is not yet fully realized. Here, we report a systematic study of polarized Raman scattering of high-quality, hydrothermally grown, single crystals of urania and thoria. The peak intensity variations for as-grown major crystal planes, post-growth polished crystal planes, and a post-growth polished non-crystallographic plane are directly linked to crystallographic orientation and crystal rotation, and agree with computed models. In particular, the parallel polarized peak intensity results are directly correlated with metal–oxygen–metal chains in the fluorite structure and can be used to determine both orientation and rotational alignment of a given crystal face if sufficiently small rotational steps are applied. These results are structure based, being applicable to the larger fluorite phase space, which is useful for optical, semiconductor, nuclear, and solid oxide fuel cell industries. Further, these results suggest that Raman spectroscopy can identify non-crystallographic orientations that are not discernable by traditional means.

36 MATERIALS SCIENCE↗

The Effect of Using Different Y{sub 2}O{sub 3} Layers on the Activation Energy and Irreversibility Line of MPMG YBCO Bulk at 1050 °C Growth Temperature

In this study, three kinds of YBCO samples which are named Y1, Y2 and Y3 were fabricated by a melt–powder–melt–growth (MPMG) method. The Y1 sample was placed into a platinum (Pt) crucible without Y{sub 2}O{sub 3}, the Y2 sample was located on a Al{sub 2}O{sub 3} crucible with a freely poured Y{sub 2}O{sub 3} powder and the Y3 sample was located on a Al{sub 2}O{sub 3} crucible with a 1-mm-thick buffer layer of Y{sub 2}O{sub 3}. YBCO samples were investigated by magnetoresistivity (ρ–T) measurements in dc magnetic fields (parallel to the c-axis) up to 5 T. The effect of the Y{sub 2}O{sub 3} layer on the activation energy and irreversible flux of the samples was studied. The activation energies (U) were determined using the Arrhenius activation energy law from ρ–T. The power law relationship for U with H{sup −α} was investigated. α was calculated to find out which defects were dominant in the samples. Irreversibility fields (H{sub irr}) and upper critical fields (H{sub c2}) were obtained using 10 and 90% criteria of the normal-state resistivity value from ρ–T curves. Irreversibility lines (ILs) were estimated from the equation H{sub irr} ∼ (1 − T{sub irr}(H)/T{sub irr}(0)){sup n}. The fitting results to giant flux creep and vortex glass models were discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computational Optimization of 133m Xe Production via Neutron Irradiation in a TRIGA Reactor

Here, the Comprehensive Nuclear-Test-Ban Treaty bans all nuclear tests worldwide. As part of treaty compliance, the concentration of radioactive nuclides in the atmosphere is monitored to detect nuclear weapons tests. Radioactive noble gas fission products, specifically radioxenon, can vent into the atmosphere after a nuclear weapons test, even if the test is well contained underground or underwater. Radioxenon thus serves as a signal for nuclear weapons tests. All atmospheric monitoring systems require samples of radioxenon isotopes for detector calibration, quality control, and certification. Here, we present a novel, improved method for creating samples of 133m Xe via neutron irradiation of 132 Xe in the Washington State University TRIGA reactor. 132 Xe neutron absorption results in either 133 Xe or 133m Xe—thermal neutron absorption results in 133m Xe 12% of the time, while fast neutron absorption (above ~1 MeV) results in 133m Xe ~50% of the time. To optimize the production of 133m Xe via neutron absorption in 132 Xe in the thermal TRIGA reactor, spectral tuning using an irradiation chamber is required to maximize the fraction of fast neutrons being absorbed and minimize the number of thermal neutrons interacting with the 132 Xe. We used MCNP to tally 132 Xe absorptions with the isotopic tally function, flux tallies and neutron attenuation to estimate the number of neutrons reaching the 132 Xe through the irradiation chamber, and the adjoint importance function to improve the source strength estimate. Additionally, we performed a heat transfer analysis for safety considerations. It was determined that the use of a 96% enriched 10 B boron carbide chamber, placed next to the fuel elements in reactor position D8, increases the 133m Xe/ 133 Xe activity ratio from a baseline value of 0.3 to 1.0, a 233% increase. Additionally, it was determined that the alpha heating produced in the boron does not become an unmanageable problem in the Washington State University reactor.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗

Novel Geometric Operations for Linear Programming

This report summarizes the work performed under the project "Linear Programming in Strongly Polynomial Time." Linear programming (LP) is a classic combinatorial optimization problem heavily used directly and as an enabling subroutine in integer programming (IP). Specifically IP is the same as LP except that some solution variables must take integer values (e.g. to represent yes/no decisions). Together LP and IP have many applications in resource allocation including general logistics, and infrastructure design and vulnerability analysis. The project was motivated by the PI's recent success developing methods to efficiently sample Voronoi vertices (essentially finding nearest neighbors in high-dimensional point sets) in arbitrary dimension. His method seems applicable to exploring the high-dimensional convex feasible space of an LP problem. Although the project did not provably find a strongly-polynomial algorithm, it explored multiple algorithm classes. The new medial simplex algorithms may still lead to solvers with improved provable complexity. We describe medial simplex algorithms and some relevant structural/complexity results. We also designed a novel parallel LP algorithm based on our geometric insights and implemented it in the Spoke-LP code. A major part of the computational step is many independent vector dot products. Our parallel algorithm distributes the problem constraints across processors. Current commercial and high-quality free LP solvers require all problem details to fit onto a single processor or multicore. Our new algorithm might enable the solution of problems too large for any current LP solvers. We describe our new algorithm, give preliminary proof-of-concept experiments, and describe a new generator for arbitrarily large LP instances.

97 MATHEMATICS AND COMPUTING↗