Search NASA⌕ Search

SEARCH · Search NASA

Results for “MASK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Orbital Angular Momentum from Self‐Assembled Concentric Nanoparticle Rings

Abstract Ring‐shaped nanostructures can focus, filter, and manipulate electromagnetic waves, but are challenging to incorporate into devices using standard nanofabrication techniques. Directed self‐assembly (DSA) of block copolymers (BCPs) on lithographically patterned templates has successfully been used to fabricate concentric rings and spirals as etching masks. However, this method is limited by BCP phase behavior and material selection. Here, a straightforward approach to generate ring‐shaped nanoparticle assemblies in thin films of supramolecular nanocomposites is demonstrated. DSA is used to guide the formation of concentric rings with radii spanning 150–1150 nm and ring widths spanning 30–60 nm. When plasmonic nanoparticles are used, ring nanodevice arrays can be fabricated in one step, and the completed devices produce high‐quality orbital angular momentum (OAM). Nanocomposite DSA simplifies and streamlines nanofabrication by producing metal structures without etching or deposition steps; it also introduces interparticle coupling as a new design axis. Detailed analysis of the nanoparticle ring assemblies confirms that the supramolecular system self‐regulates the spatial distribution of its components, and thus exhibits a degree of flexibility absent in DSA of BCPs alone, where structures are determined by polymer‐pattern incommensurability. The present studies also provide guidelines for developing self‐regulating DSA as an alternative to incommensurability‐driven methods.

Vargo, Emma↗

Encapsulating High–Temperature Superconducting Twisted van der Waals Heterostructures Blocks Detrimental Effects of Disorder

High-temperature cuprate superconductors based van der Waals (vdW) heterostructures hold high technological promise. One of the obstacles hindering their progress is the detrimental effect of disorder on the properties of the vdW-devices-based Josephson junctions (JJs). Here, a new method of fabricating twisted vdW heterostructures made of Bi 2 Sr 2 CuCa 2 O 8+δ , crucially improving the JJ characteristics and pushing them up to those of the intrinsic JJs in bulk samples, is reported. The method combines cryogenic stacking using a solvent-free stencil mask technique and covering the interface by insulating hexagonal boron nitride crystals. Despite the high-vacuum condition down to 10 –6 mbar in the evaporation chamber, the interface appears to be protected from water molecules during the in situ metal deposition only when fully encapsulated. Comparing the current-voltage curves of encapsulated and unencapsulated interfaces, it is revealed that the encapsulated interfaces' characteristics are crucially improved, so that the corresponding JJs demonstrate high critical currents and sharpness of the superconducting transition comparable to those of the intrinsic JJs. Finally, it is shown that the encapsulated heterostructures are more stable over time.

2D materials↗

Thermal Disorder‐Induced Strain and Carrier Localization Activate Reverse Halide Segregation

The reversal of halide ions is studied under various conditions. However, the underlying mechanism of heat-induced reversal remains unclear. This work finds that dynamic disorder-induced localization of self-trapped polarons and thermal disorder-induced strain (TDIS) can be co-acting drivers of reverse segregation. Localization of polarons results in an order of magnitude decrease in excess carrier density (polaron population), causing a reduced impact of the light-induced strain (LIS – responsible for segregation) on the perovskite framework. Meanwhile, exposing the lattice to TDIS exceeding the LIS can eliminate the photoexcitation-induced strain gradient, as thermal fluctuations of the lattice can mask the LIS strain. Under continuous 0.1 W cm -2 illumination (upon segregation), the strain disorder is estimated to be 0.14%, while at 80 °C under dark conditions, the strain is 0.23%. However, in situ heating of the segregated film to 80 °C under continuous illumination (upon reversal) increases the total strain disorder to 0.25%, where TDIS is likely to have a dominant contribution. Therefore, the contribution of entropy to the system's free energy is likely to dominate, respectively. Various temperature-dependent in situ measurements and simulations further support the results. These findings highlight the importance of strain homogenization for designing stable perovskites under real-world operating conditions.

36 MATERIALS SCIENCE↗

Manufacturing Over Many Scales: High Fidelity Macroscale Coverage of Nanoporous Metal Arrays via Lift-Off-Free Nanofabrication

A low-cost, high-throughput, lift-off-free nanolithographic method is developed for creating hexagonal arrays of sub-30-nm-sized pores on a metal film, achieving uniform coverage over an entire wafer of 10 cm in diameter. Additionally, spherical nanodomains of poly(methyl methacrylate) are demonstrated to be well-controlled and self-aligned within a polystyrene matrix layer on a metal thin film without any intermediary coating. After removal of PMMA, the porous PS thin film acts as an etch mask for defining nanoscale pores in the metal underlayer by Ar ion beam milling, resulting in wafer-scale patterning with great fidelity.

36 MATERIALS SCIENCE↗

Electrical Transport Anisotropy Controlled by Oxygen Vacancy Concentration in (111) LaAlO 3 /SrTiO 3 Interface Structures

The two dimensional conducting gas that forms at the interface between the two insulators LaAlO 3 (LAO) and SrTiO 3 (STO)1, 2 has garnered a lot of attention due to wide variety of physical phenomena that it exhibits, including strong spin–orbit coupling,3, 4 superconductivity,5-8 magnetism,7-12 and localization effects,13 among others. From the earliest studies,1 it has been well established that the conditions during film growth or the post-growth treatment of samples can have a substantial effect on the properties of the interface. In particular, the amount of oxygen vacancies introduced during growth or through post-growth treatment can change the conductance of the LAO/STO interface by orders of magnitude.2, 13-17 Experiments on bulk STO18 samples and STO films19 indicate that the enhanced conduction induced by oxygen vacancies is associated with defect states introduced in the band gap of the STO at the interface, adding donor levels close to the STO conduction band edge, and acceptor levels near the valence band.18, 19 All of these earlier studies were performed on samples grown in the (001) crystal orientation. Here we report studies of the effects of various post-growth treatments on the transport properties of (111) oriented LAO/STO interface structures, which have been shown to exhibit a strong anisotropy of their properties along different crystal directions.20 As with the (001) samples, we find that the presence of oxygen vacancies increases the conductance of the interface, but at the same time also substantially decreases the anisotropy. This suggests that the defect states introduced by oxygen vacancies contribute isotropically to charge transport, partially masking the strongly anisotropic contribution of the intrinsic bands. In addition, our work shows that one can reversibly tune the transport properties of LAO/STO interface samples by applying appropriate post-growth treatment.

36 MATERIALS SCIENCE↗

Janus Membranes via Diffusion-Controlled Atomic Layer Deposition

The first use of atomic layer deposition (ALD) to produce Janus membranes is reported, with an example system consisting of a compositional gradient ranging from hydrophilic Al 2 O 3 on one face to hydrophobic poly(propylene) on the opposite face. Alternating pulses of trimethyl aluminum and water vapor lead to the growth of covalently bonded Al 2 O 3 conforming to the membrane pore surfaces. Precise control of ALD parameters significantly affects the surface wetting of the modified membrane face and the depth of Al 2 O 3 infiltration into the porosity. This depth control derives from slow precursor diffusion through the 200 nm membrane pores compared to much faster ALD surface reactions. For a given precursor exposure and purge time, increasing the number of ALD cycles decreases the water contact angle at the modified surface from hydrophobic to hydrophilic, until the water droplet is completely imbibed by the membrane. To demonstrate the utility of these Janus membranes, a hydrophilic/superaerophobic Janus treatment is shown to greatly reduce the size of air bubbles generated through the membrane, enabling faster mixing. This technique represents the first application of vapor-deposited covalently bonded metal oxides to form Janus membranes. Further opportunities are afforded by the ability to laterally pattern Al 2 O 3 across the membrane surface via physical masking.

36 MATERIALS SCIENCE↗

Dual‐Scale Nanostructures via Evaporative Assembly

Abstract Dual‐scale hierarchical structures with regular microscale patterns and varying degree of nanoscale crystalline order are synthesized on physically and chemically homogeneous substrates by evaporative self‐assembly with a suspension of DNA‐functionalized nanoparticles (NPs) with a charged core shell. For a certain NP concentration range, periodic concentric rings in a stripe‐like micropattern are produced over macroscale surface areas by an NP monolayer with hexagonal lattice structure at the nanoscale. The stripe width, spacing, and nanoparticle ordering can be controlled by varying the NP concentration. The results indicate that the interplay between “stick‐slip” motion of the droplet contact line and coulombic and steric NP interactions control the formation of the observed structures. A simple analytical model is proposed to account for the experimental observations and guide the future design of different nanostructure morphologies. This work demonstrates a simple cost‐effective mask‐free method for fabricating large‐area nanostructured 2D materials and metasurfaces for applications ranging from energy conversion/storage to optoelectronics and nanophotonics.

Srivastava, Sunita↗

Evaporative Assembly: Dual-Scale Nanostructures via Evaporative Assembly (Adv. Mater. Interfaces 7/2020)

In article number 1901954, Sunita Srivastava, Surita R. Bhatia, and co-workers demonstrate that evaporative assembly of functionalized nanoparticles can yield striking dual-scale hierarchical structures. Regular microscale stripes of nanoparticle monolayers with hexagonal nanoscale order are obtained on physically and chemically homogeneous substrates through evaporation of a suspension of DNAfunctionalized nanoparticles with a charged shell. The stripe width, spacing and nanoparticle ordering can be controlled by varying nanoparticle concentration and can be described by a simple analytical model. The results indicate that the interplay between “stick-slip” motion of the droplet contact line and Coulombic and steric nanoparticle interactions control the formation of the observed structures. Finally, this work demonstrates a simple cost-effective mask-free method for fabricating nanostructured 2D materials and metasurfaces for applications ranging from energy conversion/storage to optoelectronics and nanophotonics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An Aerosol Jet Printed Resistance Temperature Detector‐Micro Hotplate with Temperature Coefficient of Resistance Stabilized by Electrical Sintering

Abstract Aerosol jet printing (AJP) is an emerging direct write tool enabling rapid prototyping and fabrication of electronics components. AJP provides faster and less expensive production of devices with feature sizes of >10 microns compared to traditional MEMS processes. Herein, the fabrication of a resistance temperature detector‐micro hotplate (RTD‐µHP) is reported using AJP printed silver. AJP eliminates sophisticated MEMS processes such as masking, alignment, and etching. The compatibility of the AJP process with a broad range of materials is demonstrated by printing highly resolved lines on rigid and flexible substrates. Optimal thermal sintering conditions of AJP printed silver (Ag) lines are found by in situ resistance measurements. To stabilize the temperature coefficient of resistance (TCR) of the RTD‐µHP at high operating current levels, electrical sintering is performed on the RTD‐µHPs. Electrical sintering improves the conductivity of fully thermally sintered Ag RTD‐µHPs by 32% and provides a burn‐in mechanism for stabilizing the TCR. The TCR of the RTD‐µHPs after electrical sintering is 3.80 × 10 −3 at 22 °C, close to the value for bulk Ag. The performance of the RTD‐µHPs is tested using a reference thermocouple. The RTD‐µHPs show reliable and repeatable heating and temperature sensing up to 70 °C in air.

Sui, Yongkun↗

Molecular Layer Deposited Aluminum‐Based Hybrid Resist for High‐Resolution Nanolithography and Direct Ultra‐High Aspect Ratio Pattern Transfer

Inorganic-containing hybrid photoresists are critical for next-generation extreme ultraviolet (EUV) lithography and angstrom-era semiconductor miniaturization. However, associated conventional solution processing struggles to achieve ultrathin, uniform films with high conformality and compositional control, limiting overall patterning performance. Here, this study reports the systematic lithographic patterning characterization of an Al-based hybrid resist synthesized via vapor-phase molecular layer deposition (MLD), using the trimethylaluminum (TMA) metal precursor and the hydroquinone (HQ) aromatic organic linker. The resist supports both sub-20 nm high-resolution nanolithography and virtually infinite silicon plasma etch selectivity. Lithographic performance studied using electron beam lithography (EBL) as a proxy for EUV shows that, under an optimized process adopting post-exposure bake, the resist achieves the best resolution of 15.4 nm linewidth under stringent 1:1 line-space high-density patterning—limited only by the minimum beam size of the EBL system. The resist also shows wide dose latitude and balanced performance in resolution, roughness, and sensitivity. The infinite silicon etch selectivity, stemming from spontaneous aluminum oxyfluoride passivation layer formation, enables fabrication of micrometer-tall, 40 nm-wide silicon nanofin structures using only a ≈30 nm-thick resist layer, without no hard mask. These results highlight the potential of MLD-based hybrid resists for developing next-generation resist materials for micro/nanoelectronics manufacturing.

36 MATERIALS SCIENCE↗

Designing Magnetic Anisotropy through Strain Doping

Abstract The coupling between a material's lattice and its underlying spin state links structural deformation to magnetic properties; however, traditional strain engineering does not allow the continuous, post‐synthesis control of lattice symmetry needed to fully utilize this fundamental coupling in device design. Uniaxial lattice expansion induced by post‐synthesis low energy helium ion implantation is shown to provide a means of bypassing these limitations. Magnetocrystalline energy calculations can be used a priori to estimate the predictive design of a material's preferred magnetic spin orientation. The efficacy of this approach is experimentally confirmed in a spinel CoFe 2 O 4 model system where the epitaxial film's magnetic easy axis is continuously manipulated between the out‐of‐plane (oop) and in‐plane (ip) directions as lattice tetragonality moves from ip to oop with increasing strain doping. Macroscopically gradual and microscopically abrupt changes to preferential spin orientation are demonstrated by combining ion irradiation with simple beam masking and lithographic procedures. The ability to design magnetic spin orientations across multiple length scales in a single crystal wafer using only crystal symmetry considerations provides a clear path toward the rational design of spin transfer, magnetoelectric, and skyrmion‐based applications where magnetocrystalline energy must be dictated across multiple length scales.

36 MATERIALS SCIENCE↗

Birefringent Glass‐Engraved Tilted Pillar Metasurfaces for High Power Laser Applications

Abstract Birefringent materials—which are highly needed in high power laser systems—may be limited in usage due to the laser‐induced damage threshold of traditional birefringent materials. This work reports here on all‐glass metasurfaces, fabricated by angled etching through sacrificial metal nanoparticle (NP) etching masks, for generation of effective birefringence in the formed layer. As a result, a fused silica metasurface, monolithic to the underlying substrate, is demonstrated to exhibit a birefringence of 6.57° under 375 nm illumination. Full‐wave analysis shows a good agreement with the measurement and presents potential paths forward to increasing the effective metasurface birefringence. This is the first demonstration, to the best of knowledge, of an etching technique to obtain the resulting tilted pillar‐like nanofeatures. The anisotropy of the metasurface nanoelements along the two window in‐plane major axes presents different effective paths for the two polarizations and thus generates birefringence in a nonbirefringent material. Additionally, the imparted anisotropy lends itself to manipulation of physical properties of the surface as well, with metasurface feature orientation suppressing water flow along one principal axis and giving rise to water flow steering capabilities.

36 MATERIALS SCIENCE↗

Asymmetric Flexible MXene-Reduced Graphene Oxide Micro-Supercapacitor

Current microfabrication of micro–supercapacitors often involves multistep processing and delicate lithography protocols. In this study, simple fabrication of an asymmetric MXene–based micro–supercapacitor that is flexible, binder–free, and current–collector–free is reported. Here, the interdigitated device architecture is fabricated using a custom–made mask and a scalable spray coating technique onto a flexible, transparent substrate. The electrode materials are comprised of titanium carbide MXene (Ti 3 C 2 T x ) and reduced graphene oxide (rGO), which are both 2D layered materials that contribute to the fast ion diffusion in the interdigitated electrode architecture. This MXene–based asymmetric micro–supercapacitor operates at a 1 V voltage window, while retaining 97% of the initial capacitance after ten thousand cycles, and exhibits an energy density of 8.6 mW h cm –3 at a power density of 0.2 W cm –3 . Further, these micro–supercapacitors show a high level of flexibility during mechanical bending. Utilizing the ability of Ti 3 C 2 T x – MXene electrodes to operate at negative potentials in aqueous electrolytes, it is shown that using Ti 3 C 2 T x as a negative electrode and rGO as a positive one in asymmetric architectures is a promising strategy for increasing both energy and power densities of micro–supercapacitors.

36 MATERIALS SCIENCE↗

Measuring binary fluidization of nonspherical and spherical particles using machine learning aided image processing

Abstract The binary fluidization of Geldart D type nonspherical wood particles and spherical low density polyethylene (LDPE) particles was investigated in a laboratory‐scale bed. The experiment was performed for varying static bed height, wood particles count, as well as superficial gas velocity. The LDPE velocity field were quantified using particle image velocimetry (PIV). The wood particles orientation and velocity are measured using particle tracking velocimetry (PTV). A machine learning pixel‐wise classification model was trained and applied to acquire wood and LDPE particle masks for PIV and PTV processing, respectively. The results show significant differences in the fluidization behavior between LDPE only case and binary fluidization case. The effects of wood particles on the slugging frequency, mean, and variation of bed height, and characteristics of the particle velocities/orientations were quantified and compared. This comprehensive experimental dataset serves as a benchmark for validating numerical models.

Li, Cheng↗

Accurate and Data‐Efficient Micro X‐ray Diffraction Phase Identification Using Multitask Learning: Application to Hydrothermal Fluids

Traditional analysis of highly distorted micro X‐ray diffraction (μ‐XRD) patterns from hydrothermal fluid environments is a time‐consuming process, often requiring substantial data preprocessing and labeled experimental data. Herein, the potential of deep learning with a multitask learning (MTL) architecture to overcome these limitations is demonstrated. MTL models are trained to identify phase information in μ‐XRD patterns, minimizing the need for labeled experimental data and masking preprocessing steps. Notably, MTL models show superior accuracy compared to binary classification convolutional neural networks. Additionally, introducing a tailored cross‐entropy loss function improves MTL model performance. Most significantly, MTL models tuned to analyze raw and unmasked XRD patterns achieve close performance to models analyzing preprocessed data, with minimal accuracy differences. This work indicates that advanced deep learning architectures like MTL can automate arduous data handling tasks, streamline the analysis of distorted XRD patterns, and reduce the reliance on labor‐intensive experimental datasets.

97 MATHEMATICS AND COMPUTING↗

Elusive Terminal Copper Arylnitrene Intermediates

Abstract We report herein three new modes of reactivity between arylazides N 3 Ar with a bulky copper(I) β‐diketiminate. Addition of N 3 Ar X3 (Ar X3 =2,4,6‐X 3 C 6 H 2 ; X=Cl or Me) to [ i Pr 2 NN]Cu(NCMe) results in triazenido complexes from azide attack on the β‐diketiminato backbone. Reaction of [ i Pr 2 NN]Cu(NCMe) with bulkier azides N 3 Ar leads to terminal nitrenes [ i Pr 2 NN]Cu]=NAr that dimerize via formation of a C−C bond at the arylnitrene p ‐position to give the dicopper(II) diketimide 4 (Ar=2,6‐ i Pr 2 C 6 H 3 ) or undergo nitrile insertion to give diazametallocyclobutene 8 (Ar=4‐Ph‐2,6‐iPr 2 C 6 H 2 ). Importantly, reactivity studies reveal both 4 and 8 to be “masked” forms of the terminal nitrenes [ i Pr 2 NN]Cu=NAr that undergo nitrene group transfer to PMe 3 , t BuNC, and even into a benzylic sp 3 C−H bond of ethylbenzene.

Bakhoda, Abolghasem (Gus)↗

Using Ambient Ion Beams to Write Nanostructured Patterns for Surface Enhanced Raman Spectroscopy

Electrolytic spray deposition was used to pattern surfaces with 2D metallic nanostructures. Spots that contain silver nanoparticles (AgNP) were created by landing solvated silver ions at desired locations using electrically floated masks to focus the metal ions to an area as little as 20 mm in diameter. The AgNPs formed are unprotected and their aggregates can be used for surface-enhanced Raman spectroscopy (SERS). The morphology and SERS activity of the NP structures were controlled by the surface coverage of landed silver ions. The NP structures created could be used as substrates onto which SERS samples were deposited or prepared directly on top of predeposited samples of interest. The evenly distributed hot spots in the micron-sized aggregates had an average SERS enhancement factor of 108. The surfaces showed SERS activity when using lasers of different wavelengths (532, 633, and 785 nm) and were stable in air.

Environmental Molecular Sciences Laboratory↗