Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spatial Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Using Behavioral Science to Target LMI and High-Value Solar Installations (Final Technical Report)

This project is a data-driven analysis of approaches to facilitate solar adoption in LMI communities and areas with high potential benefits to the electric grid. The cornerstone of the project was two waves of randomized field experiments. The first wave involved novel approaches to reaching LMI communities based on insights from literature. The second wave involved areas of high potential of solar to the electricity grid, as determined in collaboration with the local utilities in Connecticut. Both waves were followed by surveys to develop insight into the effectiveness of different approaches. A third key element of the project is the development of new agent-based models of solar energy diffusion that explicitly incorporate the real spatial and temporal constraints that influence solar diffusion, based on real-world data on solar adoption. The project also involved outreach and dissemination of key findings to relevant stakeholders, including a guidebook on strategies to accelerate solar deployment to low and moderate income communities, multiple academic publications, and numerous presentations of the research findings.

14 SOLAR ENERGY↗

Does Selectivity of Molecular Catalysts Change with Time? Polymerization Imaged by Single-Molecule Spectroscopy

The chemoselectivity of molecular catalysts underpins much of modern synthetic organic chemistry. However, little is known about the selectivity of individual catalysts because this single-catalyst-level behavior is hidden by the bulk catalytic behavior. In this work, for the first time, the selectivity of individual molecular catalysts for two different reactions is imaged in real time at the single-catalyst level. This imaging is achieved through fluorescence microscopy paired with spectral probes that produce a snapshot of the instantaneous chemoselectivity of a single catalyst for either a single-chain-elongation or a single-chain-termination event during ruthenium-catalyzed polymerization. Superresolution imaging of multiple selectivity events, each at a different single-molecular ruthenium catalyst, indicates that catalyst selectivity may be unexpectedly spatially and time-variable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sedimentation and shear-induced dynamics of spheroids in fluids with spatial viscosity variations

A generalized reciprocal theorem is used to relate the force and torque induced on a particle in an inertia-less fluid with small variation in viscosity to integrals involving Stokes flow fields and the spatial dependence of viscosity. These resistivity expressions are analytically evaluated using spheroidal harmonics and then used to obtain the mobility of the spheroid during sedimentation, and in linear flows, of a fluid with linear viscosity stratification. The coupling between the rotational and translational motion induced by stratification rotates the spheroid’s centerline, creating a variety of rotational and translational dynamics dependent upon the particle’s aspect ratio, κ, and the component of the stratification unit vector in the gravity direction, d g . Spheroids with 0.55 ⪅ κ ⪅ 2.0 exhibit the largest variety of settling behaviors. Interestingly, this range covers most microplastics and typical microorganisms. One of the modes include a stable orientation dependent only on κ and d g , but independent of initial orientation, thus allowing for the potential control of settling angles and sedimentation rates. In a simple shear flow, cross-streamline migration occurs due to the stratification-induced force generated on the particle. Similarly, a particle no longer stays at the stagnation point of a uniaxial extensional flow. While fully analytical results are obtained for spheroids, numerical simulations provide a source of validation. These simulations also provide additional insights into the stratification-induced force- and torque-producing mechanisms through the stratification-induced stress, which is not accessed in the reciprocal theorem-based analytical calculations.

Geophysical and Geological Flows: Stratified flows↗

Comparing multi-source urban flood indicators: satellite, simulation, and citizen-reported data

Urban flooding arises from complex mechanisms, making it challenging to capture accurately with a single detection method. This study evaluates three complementary approaches to detect flooding across three Chicago neighborhoods: (i) Sentinel-1 synthetic aperture radar (SAR), offering weather-independent, high-resolution (10 m) imagery of surface inundation; (ii) the storm water management model (SWMM), simulating combined sewer overflow and drainage performance; and (iii) citizen-generated 311 service requests, capturing observed flooding impacts. By analyzing six storms ranging from severe to mild, we examine how each source uniquely contributes to identifying urban flood events. SAR imagery effectively identifies standing water but can miss brief flooding due to satellite revisit constraints. SWMM provides detailed insights into system-wide drainage behavior yet may underestimate localized street-level flooding. Meanwhile, 311 calls reflect real-world flooding impacts but are vulnerable to underreporting. Statistical overlap analysis highlights chronic flood hotspots repeatedly identified across multiple detection methods, indicating persistent infrastructure and topographic vulnerabilities. Temporal analysis further reveals that while SWMM flooding aligns closely with rainfall peaks, 311 calls typically precede or persist beyond these peaks. Our findings emphasize the value of using satellite observations, hydrological modeling, and resident-reported data in a complementary manner to better interpret patterns in flood timing, severity, and spatial distribution—providing insights that can inform targeted infrastructure improvements and contribute to urban flood resilience planning.

311↗

Load Profiles Data for the EVI-RoadTrip Web Tool

The dataset contains EVI-RoadTrip outputs, minute-by-minute load profiles in kW for each station in the simulation based on assumed utilization and network density. The load profiles are aggregated to lower spatial resolution (e.g., state-level, corridor-level) by summation of all station loads associated with the respective geography. This results in a load profile for each scenario that summarizes the corridor's, state's, or county's load profile in minute-level resolution.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Hypervelocity atmospheric flight: Real gas flow fields

Flight in the atmosphere is examined from the viewpoint of including real gas phenomena in the flow field about a vehicle flying at hypervelocity. That is to say, the flow field is subject not only to compressible phenomena, but is dominated by energetic phenomena. There are several significant features of such a flow field. Spatially, its composition can vary by both chemical and elemental species. The equations which describe the flow field include equations of state and mass, species, elemental, and electric charge continuity; momentum; and energy equations. These are nonlinear, coupled, partial differential equations that have been reduced to a relatively compact set of equations in a self-consistent manner (which allows mass addition at the surface at a rate comparable to the free-stream mass flux). The equations and their inputs allow for transport of these quantities relative to the mass-average behavior of the flow field. Thus transport of mass by chemical, thermal, pressure, and forced diffusion; transport of momentum by viscosity; and transport of energy by conduction, chemical considerations, viscosity, and radiative transfer are included. The last of these complicate the set of equations by making the energy equations a partial integrodifferential equation. Each phenomenon is considered and represented mathematically by one or more developments. The coefficients which pertain are both thermodynamically and chemically dependent. Solutions of the equations are presented and discussed in considerable detail, with emphasis on severe energetic flow fields. Hypervelocity flight in low-density environments where gaseous reactions proceed at finite rates chemical nonequilibrium is considered, and some illustrations are presented. Finally, flight where the flow field may be out of equilibrium, both chemically and thermodynamically, is presented briefly.

Howe, John T.↗

Route Generation for a Synthetic Character (BOT) Using a Partial or Incomplete Knowledge Route Generation Algorithm in UT2004 Virtual Environment

This paper presents a new Route Generation Algorithm that accurately and realistically represents human route planning and navigation for Military Operations in Urban Terrain (MOUT). The accuracy of this algorithm in representing human behavior is measured using the Unreal Tournament(Trademark) 2004 (UT2004) Game Engine to provide the simulation environment in which the differences between the routes taken by the human player and those of a Synthetic Agent (BOT) executing the A-star algorithm and the new Route Generation Algorithm can be compared. The new Route Generation Algorithm computes the BOT route based on partial or incomplete knowledge received from the UT2004 game engine during game play. To allow BOT navigation to occur continuously throughout the game play with incomplete knowledge of the terrain, a spatial network model of the UT2004 MOUT terrain is captured and stored in an Oracle 11 9 Spatial Data Object (SOO). The SOO allows a partial data query to be executed to generate continuous route updates based on the terrain knowledge, and stored dynamic BOT, Player and environmental parameters returned by the query. The partial data query permits the dynamic adjustment of the planned routes by the Route Generation Algorithm based on the current state of the environment during a simulation. The dynamic nature of this algorithm more accurately allows the BOT to mimic the routes taken by the human executing under the same conditions thereby improving the realism of the BOT in a MOUT simulation environment.

Hanold, Gregg T.↗

Modeling Streamflow and Sediment Transport Under Current and Future Climates at the West Valley Site - 20231

Performance Assessment models often require inputs representing specific hydrologic processes such as streamflow and sediment flux. This paper details the development of a process-level hydrologic model and its use in a Probabilistic Performance Assessment (PPA) system-level model for the West Valley Site in western New York. For this PPA model, a watershed model was developed using SWAT (Soil and Water Assessment Tool) and used to evaluate water and sediment fluxes in nearby streams draining the Site. A particular challenge of probabilistic modeling over long periods of time is scaling parameters appropriately so that outcomes are not grossly over- or underestimated. This challenge is especially important when the spatial and temporal scales of process and system level models differ. In this instance, the SWAT watershed model and GoldSim PPA model have similar spatial scales of stream reaches and sub-catchments within a single watershed (approximately hundreds to tens of thousands of square meters, but the temporal scales differ considerably. The SWAT model calculates streamflow and sediment transport rates at the daily scale, while the PPA model requires long-term average values that are applied over hundreds to thousands of year-long periods. As such, distributions of daily climatic parameters such as average precipitation rate, temperature, wind speed, and relative humidity were developed to force a transient SWAT model that captures the dynamic behavior of the watershed in response to daily changes in the weather. Output from the model, which includes stream flow (m{sup 3}/y) and sediment transport rate (Mg/y) is then averaged over a 100-year period as an approximation for the long-term average values which can be applied in GoldSim. A single SWAT model was run 5000 times with varying climatic inputs and deterministic soil, land use, and elevation data, and the range of outputs were compiled into a distribution which can be implemented stochastically into the PPA Model. Additionally, this paper includes a high-level discussion of how changes in future climate affect weather input distributions, and a summary of how those changes in weather affect the outcomes from the SWAT model and the inputs into the PPA model. In this analysis, future climate distributions were developed based on climate research documenting the expected changes to precipitation and temperature in western New York. The 5,000 SWAT simulations were then repeated with these future climate distributions, and the resulting output was implemented into the PPA Model as hydrologic conditions under a future climate. In the current version of the PPA Model, hydrologic parameters change linearly from the 'current climate' conditions to the 'future climate' conditions over a period of 100 years, after which they remain constant. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Spatially-resolved lithiation dynamics from operando X-ray diffraction and electrochemical modeling of lithium-ion cells

In this study, energy dispersive X-ray diffraction is used to profile the time evolution of ordered Li x C 6 phases in solid electrodes of lithium-ion cells charged at rates between 0.2 and 4.7C (where 1C corresponds to full discharge in 1 h). The methods for quantifying lithium concentration in these phases from the acquired diffraction patterns are described. Compact expressions for time-dependent concentration gradients in the solid electrodes using orthogonal polynomial expansions are presented. Experimentally, these gradients persisted in lithiated graphite electrodes even after the cells rested at open-circuit for over 9 h. A multiphase electrochemical model of graphite intercalation captured many of the observed behaviors, including the progression of phase transitions and the persistent gradients at zero current. However, the magnitude of concentration gradients in both the oxide cathode and graphite anode is underestimated by the model, even at moderate currents.

25 ENERGY STORAGE↗

Numerical Simulations of Geologic Storage Reservoir Management to Support Risk Mitigation Evaluation

This report provides a detailed description of a set of numerical simulations that represent reservoir behavior over time in response to different operational decision scenarios for detection of potential leakage and reduction or avoidance of leakage impact at a hypothetical geological carbon storage (GCS) site. These simulations serve as the basis for a series of GCS leakage risk forecasts that are to be developed using the National Risk Assessment Partnership’s Open-Source Integrated Assessment Model (NRAP-Open-IAM), and a demonstration of a simple decision support workflow for evaluation of mitigation strategies based on results of those system model forecasts. This risk assessment and decision support study is forthcoming. Four injection scenarios were considered: a constant rate carbon dioxide (CO 2 ) injection case (base case), a case with CO 2 injection rate adjustment, a case with early termination of injection operations, and a case with brine extraction. CO 2 injection operations were controlled to ensure that the pressure transient remains below the defined manageable reservoir fracture pressure, with consideration shown to hypothetical locations within the modeled spatial domain where the overburden was weaker and lower transient pressure increases were allowable. Additionally, a brine extraction alternative was considered as a reservoir management and risk mitigation option to reduce reservoir pressure, steer the plume away from any hypothetical geohazard such as fault as needed, and enhance storage capacity. Such operational actions contribute to risk management overtime. This study explores the potential utility of reservoir management for risk reduction at GCS sites. This study shows that the injection design may modify the time to CO 2 breakthrough at a legacy well; in particular, these results show that brine extraction can add value for mitigating risk both by delaying leakage and reducing pressure build-up. For the scenario considered, both pressure plots and pressure distributions demonstrate that pressure build-up was decreased by 3% with brine extraction. Additionally, extraction of brine afforded enhancement of CO 2 storage capacity by 5% compared to the base case. These findings suggest that brine extraction has substantial potential to steer the risk-related reservoir effects away from known geohazards (e.g., faults and legacy wells) by conducting pressure transient effects and CO 2 plume movement toward the production well. Injection rate adjustment scenarios considered in this study show potential value for managing both reservoir pressure transients and CO 2 plume behavior. Operational actions for reducing injection and/or early termination of injection (as compared to the base case), however, require careful design; tailoring both the extent and timing of injection rate adjustment over the injection and post-injection operational period must be thoroughly planned to balance maximizing storage and minimizing subsurface environmental risk. The study also gives preliminary consideration to the effectiveness that monitoring strategy may play in providing useful information to inform reservoir management decisions for risk reduction. Two types of monitoring were considered: 1) pressure build-up or pressure transient; and 2) potential leakage detection from a CO 2 mass or plume. Four hypothetical legacy wells, two plugged and two abandoned, were placed in the model domain. Monitoring along these wells was measured over time in individual stacked reservoir formations and shale formations to support risk mitigation decisions, especially operational decisions that assisted in risk reduction. These simulations will serve as the basis for a series of GCS leakage risk forecasts that are to be developed using NRAP’s Open-IAM, and demonstration of a simple decision support workflow for comparative assessment of mitigation alternatives based on results of those system model forecasts. This risk assessment and decision support study is forthcoming.

54 ENVIRONMENTAL SCIENCES↗

A Data Set for Intercomparing the Transient Behavior of Dynamical Model-Based Subseasonal to Decadal Climate Predictions

Climate predictions using coupled models in different time scales, from intraseasonal to decadal, are usually affected by initial shocks, drifts, and biases, which reduce the prediction skill. These arise from inconsistencies between different components of the coupled models and from the tendency of the model state to evolve from the prescribed initial conditions toward its own climatology over the course of the prediction. Aiming to provide tools and further insight into the mechanisms responsible for initial shocks, drifts, and biases, this paper presents a novel data set developed within the Long Range Forecast Transient Intercomparison Project, LRFTIP. This data set has been constructed by averaging hindcasts over available prediction years and ensemble members to form a hindcast climatology, that is a function of spatial variables and lead time, and thus results in a useful tool for characterizing and assessing the evolution of errors as well as the physical mechanisms responsible for them. A discussion on such errors at the different time scales is provided along with plausible ways forward in the field of climate predictions

54 ENVIRONMENTAL SCIENCES↗

Correlative analysis of structure and chemistry of Li x FePO 4 platelets using 4D-STEM and X-ray ptychography

Lithium iron phosphate (Li x FePO 4 ), a cathode material used in rechargeable Li-ion batteries, phase separates upon de/lithiation under equilibrium. The interfacial structure and chemistry within these cathode materials affects Li-ion transport, and therefore battery performance. Here, correlative imaging of Li x FePO 4 was performed using four-dimensional scanning transmission electron microscopy (4D-STEM), scanning transmission X-ray microscopy (STXM), and X-ray ptychography in order to analyze the local structure and chemistry of the same particle set. Over 50,000 diffraction patterns from 10 particles provided measurements of both structure and chemistry at a nanoscale spatial resolution (16.6–49.5 nm) over wide (several micron) fields-of-view with statistical robustness. Li x FePO 4 particles at varying stages of delithiation were measured to examine the evolution of structure and chemistry as a function of delithiation. In lithiated and delithiated particles, local variations were observed in the degree of lithiation even while local lattice structures remained comparatively constant, and calculation of linear coefficients of chemical expansion suggest pinning of the lattice structures in these populations. Partially delithiated particles displayed broadly core–shell-like structures, however, with highly variable behavior both locally and per individual particle that exhibited distinctive intermediate regions at the interface between phases, and pockets within the lithiated core that correspond to FePO 4 in structure and chemistry. The results provide insight into the Li x FePO 4 system, subtleties in the scope and applicability of Vegard’s law (linear lattice parameter-composition behavior) under local versus global measurements, and demonstrate a powerful new combination of experimental and analytical modalities for bridging the crucial gap between local and statistical characterization.

25 ENERGY STORAGE↗

Numerical simulation of NSLS-II fast orbit feedback system

We discuss recent work on the construction of a numerical simulation of the fast orbit feedback system at NSLS-II. The simulation operates in the time domain and also includes the spatial domain, i.e. all beam position monitors (BPMs) and correctors. It can accept inputs of the real beam orbit and the measured orbit response matrix. It can also add errors to every stage of the calculation. We present methods to verify the simulation results by comparing the simulation results with experimental data collected at NSLS-II. The results are in very good agreement. The effects of errors from BPMs and correctors, as well as the amplitude of excitation, on the feedback performance, are also explored. This simulation can be used to predict the behavior and performance of the system for a future upgrade.

36 MATERIALS SCIENCE↗

Characterizing the initial state and dynamical evolution in XeXe and PbPb collisions using multiparticle cumulants

For the first time, correlations among mixed-order moments of two or three flow harmonics —( v n k , v m l ) and ( v n k , v m l , v p q ), with k, l, and q denoting the respective orders—are measured in xenon–xenon (XeXe) collisions and compared with lead–lead (PbPb) results, providing a novel probe of collective behavior in heavy ion collisions. These measurements compare a nearly spherical, doubly-magic 208 Pb nucleus to a triaxially deformed 129 Xe nucleus, emphasizing the sensitivity to initial-state geometry fluctuations arising from nuclear deformation. The dependence of these results (v n , n = 2 , 3 , 4 ) on the shape and size of the nuclear overlap region is studied. Comparisons between v 2 , v 3 , and v 4 demonstrate the importance of v 3 and v 4 in exploring the nonlinear hydrodynamic response of the quark-gluon plasma (QGP) to the initial spatial anisotropy. The results constrain initial-state model parameters that influence the evolution of the QGP. The CMS detector was used to collect XeXe and PbPb data at nucleon-nucleon center-of-mass energies of S N N = 5.44 and 5.36 TeV, respectively. Correlations are extracted using multiparticle mixed-harmonic cumulants (up to eight-particle cumulants) with charged particles in the pseudorapidity range |η| < 2.4 and transverse momentum range 0.5 < p T < 3 GeV/c.

CMS↗

Cosmological consequences of first-order general-relativistic viscous fluid dynamics

In this work, we investigate the out-of-equilibrium dynamics of viscous fluids in a spatially flat Friedmann-LemaîtreRobertson-Walker cosmology using the most general causal and stable viscous energy-momentum tensor defined at first order in spacetime derivatives. In this new framework a pressureless viscous fluid having equilibrium energy density ρ can evolve to an asymptotic future solution in which the Hubble parameter approaches a constant while ρ → 0, even in the absence of a cosmological constant (i.e., Λ = 0). Thus, while viscous effects in this model drive an accelerated expansion of the universe, the equilibrium energy density itself vanishes, leaving behind only the acceleration. This behavior emerges as a consequence of causality in first-order theories of relativistic fluid dynamics and it is fully consistent with Einstein’s equations.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermodynamic Origin of Reaction Non-Uniformity in Battery Porous Electrodes and Its Mitigation

The development of non-uniform reaction current distribution within porous electrodes is a ubiquitous phenomenon during battery charging/discharging and frequently controls the rate performance of battery cells. Reaction inhomogeneity in porous electrodes is usually attributed to the kinetic limitation of mass transport within the electrolyte and/or solid electrode phase. In this work, however, we reveal that it is also strongly influenced by the intrinsic thermodynamic behavior of electrode materials, specifically the dependence of the equilibrium potential on the state of charge: the electrode reaction becomes increasingly non-uniform when the slope of the equilibrium potential curve is reduced. We employ numerical simulations and equivalent circuit model to elucidate such a correlation and show that the degree of reaction inhomogeneity and the resultant discharge capacity can be predicted by a dimensionless reaction uniformity number. For electrode materials that have equilibrium potentials insensitive to the state of charge and exhibit significant reaction non-uniformity, we demonstrate several approaches to spatially homogenizing the reaction current inside porous electrodes, including matching the electronic and ionic resistances, introducing graded electronic conductivity and reducing the surface reaction kinetics.

25 ENERGY STORAGE↗

Fencing affects movement patterns of two large carnivores in Southern Africa

The erection of peripheral fences around protected areas has been shown to adversely affect the movement behavior, genetic connectivity and long-term viability of animal populations. However, fencing is also used extensively to reduce human encroachment, limit poaching activities, and mitigate human–wildlife conflicts. Limited information on the movement behavior of carnivores is available along the periphery of protected areas, particularly in semi-arid environments. To quantify the potential effects of the 824 km perimeter fence surrounding the Etosha National Park (Etosha, Namibia) on the movement and space use of carnivores, we collected GPS movement data from 36 lions (Panthera leo) and seven spotted hyenas (Crocuta crocuta) over a 14-year period. For these two apex carnivores, we measured the impact of the Etosha fence on their movements (step lengths and path straightness), calculated the likelihood of fence crossings, and evaluated the spatial–temporal characteristics of these crossings. Our results indicated that lions and hyenas moved faster (longer step lengths) when closer to the fence. Lions showed no variation in path straightness with respect to the fence but hyenas had straighter movement paths when closer to the fence. When moving within the vicinity of the fence, lions had a 9% likelihood of crossing the fence, while hyenas were much more likely (18%) to do so, which suggests that the Etosha fence was more permeable for hyenas than for lions. Fence crossings predominantly occurred at night for both species. Lions were more likely to cross the fence during the cold dry season (May–August) whereas hyenas crossed more often during the warm wet season (December–April). Female and adult lions had a higher probability of crossing the fence than males and subadults. These findings could be useful in the development of appropriate strategies to mitigate human–carnivore conflicts and thus promote the conservation of carnivores in multiple-use areas along the periphery of the park. Further research is needed to better elucidate the impact of perimeter fences on a broader suite of carnivores and other large mammals, including species-specific variation in the response to fences, as well as the economic benefits of fencing provided to local communities.

59 BASIC BIOLOGICAL SCIENCES↗

Cryogenic Reflectance Spectroscopy in Support of Planetary Missions

Present understanding of planetary composition is based primarily on remotely-sensed data, and in particular upon ultraviolet, visible, and infrared spectroscopy. Spectra acquired by telescopic and spacecraft instruments are compared to laboratory measurements of pure materials in order to identify surface components based on characteristic absorption features. Cryogenic spectral measurements are necessary for the study of worlds beyond the Earth's orbit. While some materials exhibit only small spectral changes as a function of temperature, many others are strongly temperature-dependent. For example, hydrated salts exhibit different spectral behavior under conditions appropriate to Europa than at terrestrial temperatures. The icy satellites of the outer solar system contain significant quantities of volatile ices which do not even exist at standard temperature and pressure (STP). A comprehensive spectral database of ices and minerals covering a wide temperature range will have applications ranging from the study of comets and Kuiper Belt objects to outer planet satellites and the polar regions of Mars. Efforts are presently underway at NASA-Ames to develop capabilities which will contribute to such a database. As spacecraft instruments feature increasing spatial and spectral resolution, appropriate laboratory reference spectra become increasingly critical to accurate interpretation of the spacecraft data.

Dalton, J. B.↗