Search NASA⌕ Search

SEARCH · Search NASA

Results for “'98)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

System implementation for Earth Radiation Budget Satellite System

A description is presented of the instrument system which is needed for the Earth Radiation Budget Satellite System (ERBSS). The system is to be composed of instruments on two of NOAA's near-polar sun-synchronous Tiros-N/NOAA A through G series of operational satellites and on a NASA midinclination satellite of the Applications Explorer Mission (AEM) type referred to as ERBS-A/AEM. The Tiros-N/NOAA satellites will be in nominal 833 km altitude circular orbits with orbital inclinations of 98 deg. The AEM satellite will be in a circular orbit with an inclination of approximately 56 deg and a nominal altitude of 600 km. Each satellite will carry wide field-of-view (WFOV) and medium field-of-view (MFOV) sensors, a sensor for measuring the solar constant, and a narrow field-of-view (NFOV) cross-track scanner. The conceptual design of the W/MFOV instrument is discussed along with the conceptual design of the scanner.

Cooper, J. E.↗
NASA NTRS1978

Design and performance verification of a passive propellant management system

This paper describes the design and verification testing of a reusable passive propellant management system. The system was designed to acquire propellant in low- or zero-g environments and also retain this propellant under high axially directed accelerations that may be experienced during launch and orbit-to-orbit transfer. The system design requirements were established to satisfy generally the requirements for a large number of potential NASA and military applications, such as orbit-to-orbit shuttles and satellite vehicles. The resulting concept was a multicompartmented tank with independent surface tension acquisition channels in each compartment. The tank was designed to provide a minimum expulsion efficiency of 98 percent when subjected to the simultaneous conditions of acceleration, vibration, and outflow. The system design has the unique capability to demonstrate low-g performance in a 1-g test environment, and the test program summarized was structured around this capability.

Hess, D. A.↗
NASA NTRS1975

Density, chemistry, and size distribution of interplanetary dust

Depth/diameter ratios measured for 98 craters in lunar glass targets reveal a broad distribution with a single strong peaking between 0.55 and 0.8. The measured values indicate a mean meteoroid density greater than 1 g/cu cm and probably less than 4 g/cu cm. Microprobe analyses show that typical glass pit liners on silicate targets contain only approximately 0.1% or less of meteoritic material. The size-frequency distribution of meteoroids was analyzed for a fractured glass surface of 60095, and a very steep size distribution of submicron meteoroids is indicated. As in the case of 15205, a dip at approximately 5 micron in the size-frequency distribution is detected.

Brownlee, D. E.↗
NASA NTRS1978

The Galatia, Kansas, chondrite

The paper describes the Galatia meteorite found August 1971 approximately 7 km ENE of Galatia, Barton County, Kansas (98 deg 53 min W, 38 deg 39.5 min N). The single stone weighed 23.9 kg and is partially weathered. Olivine (Fa 24.9) and pyroxene (Fs 20.9) compositions indicate L-group classification, and textural observations indicate that the stone is of petrologic type 6. While Galatia is similar in many respects to the Otis L6 chondrite found 20 miles to the west, Galatia does not have the brecciated structure of Otis and is therefore not part of the same fall.

Van Schmus, W. R.↗
NASA NTRS1977

Pressureless sintered beta-prime-Si3N4 solid solution - Fabrication, microstructure, and strength

Pressureless sintering of beta-prime-Si3N4 solid solution was studied as a function of temperature using Si3N4, A1N, and Al2O3 as basic constituents. Y2O3-SiO2 additions were used to promote liquid-phase sintering. The sintered specimens were characterized with respect to density, microstructure, strength, oxidation, and thermal shock resistance. Density greater than 98 percent of theoretical was achieved by pressureless sintering at 1750 C. The microstructure consisted essentially of fine-grained beta-prime-Si3N4 solid solution as the major phase. Modulus of rupture strengths up to 483 M Pa were achieved at moderate temperature (1000 C), but decreased to 228 M Pa at 1380 C. This substantial strength loss was attributed to a 'glassy' grain boundary phase formed during cooling from the sintering temperature. The best oxidation resistance was exhibited by a composition containing 3 mol % Y2O3-SiO2 additives. Water quench thermal shock resistance was equivalent to that of reaction sintered silicon nitride but lower than hot-pressed silicon nitride.

Dutta, S.↗
NASA NTRS1980

Moisture penetration in microcircuit packages

Results of study of hybrid microcircuit packages tested in temperature/humidity environments ranging from 25 C at 98 percent relative humidity (RH) to 85 C at 85 percent RH shows that package susceptibility to moisture is affected more by high temperature than humidity, and room temperature tests are inadequate for testing package seal integrity.

Licari, J. J.↗
NASA NTRS1978

Design package for concentrating solar collector panels

Information used to evaluate the design of the Northrup concentrating collector is presented. Included are the system performance specifications, the applications manual, and the detailed design drawings of the collector. The collector is a water/glycol/working fluid type, with a dipped galvanized steel housing, transparent acrylic Fresnel lens cover, copper absorber tube, and fiber glass insulation. It weights 98 pounds. A collector assembly includes four collector units within a tracking mount array.

Source record↗
NASA NTRS1978

The high-energy pulsed X-ray spectrum of HER X-1 as observed with OSO-8

Her X-1 was observed from 1977 August 30 to September 10 using the High-Energy X-Ray Scintillation Spectrometer on board the OSO-8 satellite. The observation, during which the source was monitored continually for nearly an entire ON-state, covered the energy range from 16 to 280 keV. Pulsed flux measurements as a function of binary orbit and binary phase are presented for energies between 16 and 98 keV. The pulsed flux between 16 and 33 keV exhibited a sharp decrease following the fourth binary orbit and was consistent with zero pulsed flux thereafter. The pulsed spectrum was fitted with a power law, a thermal spectrum without features, and a thermal spectrum with a superposed gaussian centered at 55 keV. The latter fit has the smallest value of chi - squared per degree of freedom, and the resulting integrated line intensity is 1.5 superscript + 4.1 subscript - 1.4 x .001 photons s superscript-1 cm superscript-2 for a width of 3.1 superscript + 9.1 subscript -2.6 keV. This result, while of low statistical significance, agrees with the value observed by Trumper (1978) during the same On-state.

Maurer, G. S.↗
NASA NTRS1979

Effect of oxygen-nitrogen ratio on sinterability of Sialons

The effect of varying the sintering temperature and the oxygen to nitrogen ratio (O/N) on the sinterability of Sialons of the formula Si2.55Al0.6OyN4-0.667y was investigated for y between 0.57 and 1.92 (O/N between 0.157 and 0.706). The Sialons reached maximum density on pressureless sintering for 4 hours at about 1760 C in nitrogen. Optimum sinterability with densities up to about 98 percent of theoretical was attained with negligible X-phase in the O/N range from about 0.2 to 0.3. On sintering at approximately 1830 C the Sialons decomposed with evolution of silicon and aluminum.

Arias, A.↗
NASA NTRS1979

Development and Testing of Shingle-type Solar Cell Modules

The design, development, fabrication and testing of a shingle-type terrestrial solar cell module which produces 98 watts/sq m of exposed module area at 1 kW/sq m insolation and 61 C are reported. These modules make it possible to easily incorporate photovoltaic power generation into the sloping roofs of residential or commercial buildings by simply nailing the modules to the plywood roof sheathing. This design consists of nineteen series-connected 53 mm diameter solar cells arranged in a closely packed hexagon configuration. These cells are individually bonded to the embossed surface of a 3 mm thick thermally tempered hexagon-shaped piece of glass. Polyvinyl butyral is used as the laminating adhesive.

Shepard, N. F., Jr.↗
NASA NTRS1979

LSA silicon material task closed-cycle process development

The initial effort on feasibility of the closed cycle process was begun with the design of the two major items of untested equipment, the silicon tetrachloride by product converter and the rotary drum reactor for deposition of silicon from trichlorosilane. The design criteria of the initial laboratory equipment included consideration of the reaction chemistry, thermodynamics, and other technical factors. Design and construction of the laboratory equipment was completed. Preliminary silicon tetrachloride conversion experiments confirmed the expected high yield of trichlorosilane, up to 98 percent of theoretical conversion. A preliminary solar-grade polysilicon cost estimate, including capital costs considered extremely conservative, of $6.91/kg supports the potential of this approach to achieve the cost goal. The closed cycle process appears to have a very likely potential to achieve LSA goals.

Roques, R. A.↗
NASA NTRS1977

Effects of pressure and temperature on hot pressing a sialon

The combined effects of temperature and pressure on the resulting density of a sialon (i.e., a ceramic composed of Si, Al, O, and N) are evaluated. Pressures in the 3.5-27.5 MPa range and temperatures in the 1550-1750 C range are considered. It is found that: (1) fully dense sialon bodies may be produced at lower temperatures than those usually used in the field, (2) the phase equilibrium reaction is increased by increased pressure, (3) the iso-density contour may be used to help design the desired microstructure, (4) phase changes occurring in the sample during hot pressing influenced sialon densification to a large extent, and (5) microstructures exceeding 98% theoretical density suggest that plastic deformation has contributed to densification.

Yeh, H. C.↗
NASA NTRS1979

Voyager telecommunications - The broadcast from Jupiter

The means by which the data collected by the Voyager 1 mission to Jupiter were returned to earth are presented. Radio links between the earth and the spacecraft are used for the transmission of both imaging and nonimaging telemetry from the spacecraft and commands from the earth and for radiometric observations of the spacecraft and its environment. Features which have lead to vast improvements in the capability of the Voyager telecommunications system over that of previous space probes include the use of X-band rather than S-band telemetry, a dual power X-band traveling wave tube amplifier, a 3.7 m spacecraft antenna and a single channel telemetry system with concatenated coding. Communications equipment at the three ground complexes of the Deep Space Network for telemetry reception includes 64 m steerable antennas, cryogenic maser preamplifiers and a phase-lock loop receiver. Voyager 1 has met or exceeded all of its telecommunications requirements, providing a 98% data return and a total of 2 x 10 to the 11th data bits during the Jupiter encounter.

Edelson, R. E.↗
NASA NTRS1978

Development of a shingle-type solar cell module

The development of a solar cell module, which is suitable for use in place of shingles on the sloping roofs of residental or commercial buildings, is reported. The design consists of nineteen series-connected 53 mm diameter solar cells arranged in a closely packed hexagon configuration. The shingle solar cell module consists of two basic functional parts: an exposed rigid portion which contains the solar cell assembly, and a semi-flexible portion which is overlapped by the higher courses of the roof installation. Consideration is given to the semi-flexible substrate configuration and solar cell and module-to-module interconnectors. The results of an electrical performance analysis are given and it is noted that high specific power output can be attributed to the efficient packing of the circular cells within the hexagon shape. The shingle should function for at least 15 years, with a specific power output of 98 W/sq w.

Shepard, N. F., Jr.↗
NASA NTRS1979

Rate constant measurements for the reaction Cl + CH2O yields HCl + CHO Implications regarding the removal of stratospheric chlorine

The flash photolysis resonance fluorescence technique was employed to investigate the rate constant for the reaction Cl + CH2O yields HCl + CHO from 223 to 323 K. An Arrhenius fit of the data gives a rate constant equal to (1.09 + or - 0.40) x 10 to the -10th exp/-(131 + or - 98)/T/ in units of cu cm/molecule per sec. The results are compared to two very recent kinetic studies and are assessed in view of the reaction's role in disrupting the Cl-ClO stratospheric ozone depletion chain.

Anderson, P. C.↗
NASA NTRS1980

Effect of geometry and operating conditions on spur gear system power loss

The results of an analysis of the effects of spur gear size, pitch, width, and ratio on total mesh power loss for a wide range of speeds, torques, and oil viscosities are presented. The analysis uses simple algebraic expressions to determine gear sliding, rolling, and windage losses and also incorporates an approximate ball bearing power loss expression. The analysis shows good agreement with published data. Large diameter and fine pitched gears had higher peak efficiencies but low part load efficiency. Gear efficiencies were generally greater than 98 percent except at very low torque levels. Tare (no-load) losses are generally a significant percentage of the full load loss except at low speeds.

Anderson, N. E.↗
NASA NTRS1980

Analysis of uncertainties in turbine metal temperature predictions

An analysis was conducted to examine the extent to which various factors influence the accuracy of analytically predicting turbine blade metal temperatures and to determine the uncertainties in these predictions for several accuracies of the influence factors. The advanced turbofan engine gas conditions of 1700 K and 40 atmospheres were considered along with those of a highly instrumented high temperature turbine test rig and a low temperature turbine rig that simulated the engine conditions. The analysis showed that the uncertainty in analytically predicting local blade temperature was as much as 98 K, or 7.6 percent of the metal absolute temperature, with current knowledge of the influence factors. The expected reductions in uncertainties in the influence factors with additional knowledge and tests should reduce the uncertainty in predicting blade metal temperature to 28 K, or 2.1 percent of the metal absolute temperature.

Stepka, F. S.↗
NASA NTRS1979

High pressure sintering of non-oxide materials

Pure materials of AIN, alpha-Si3N4 and TiC, without additives were sintered at 800 C to 1400 C under the pressures of 30 kbar and 50 kbar for 0.5 hours. The maximum density of sintered bodies for the cited materials was nearly 100% for AIN, 98% for TiC and 96% for alpha-Si3N4.

Shimado, M.↗