Search NASA⌕ Search

SEARCH · Search NASA

Results for “ASH CONTENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Lab-scale pyrolysis of the Automotive Shredder Residue light fraction and characterization of tar and solid products

Highlights: • Car fluff was pyrolysed at various temperatures. • Condensable gases (tar) and solid residue obtained were characterized. • Char had low HHV, high metal content and low PAH concentration. • Tar had high HHV and can be used as an alternative fuel. • Toxicity of tar changes with temperature, the greatest contribution is from PCDFs. - Abstract: The general aim of this study is the recovery of Automotive Shredder Residue (ASR). The ASR light fraction, or car fluff, that was collected at an Italian shredding plant was pyrolysed at various temperatures (500–800 °C) in a lab-scale reactor. The condensable gases (tar) and solid residue yields increased with decreasing temperature, and these products were characterized to suggest a potential use to reclaim them. The higher heating value (HHV) of tar was 34–37 MJ/kg, which is comparable with those of fossil fuels. Furthermore, the ash content was low (0.06–4.98%). Thus, tar can be used as an alternative fuel. With this prospect, the concentrations of polychlorinated dibenzodioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in tar were determined. The toxicity of tar changes with temperature (1–5 ng I-TEQ/g), and the PCDFs significantly contribute to tar toxicity, which was 75–100% with a maximum of 99.6% at 700 °C. Regarding the characterization of the solid residue, the low HHV (2.4–3.3 MJ/kg) does not make it suitable for energy recovery. Regarding material recovery, we considered its use as a filler in construction materials or a secondary source for metals. It shows a high metal concentration (280,000–395,000 mg/kg), which is similar at different pyrolysis temperatures. At 500 °C, polycyclic aromatic hydrocarbons (PAHs) were not detected in the solid residue, whereas the maximum total PAH concentration (19.41 ng/g, 700 °C) was lower than that in fly ash from MSWI. In conclusion, 500 °C is a suitable pyrolysis temperature to obtain valuable tar and solid residue.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Oxidation characteristics of gasoline direct-injection (GDI) engine soot: Catalytic effects of ash and modified kinetic correlation

In this paper, experimental analyses are conducted into the GDI soot oxidation characteristics as dependent on engine operating conditions. Soot is sampled at various engine operating conditions of a commercial 2.4 L GDI engine with a naturally aspirated, homogeneous, and stoichiometric operation strategy. The oxidation reactivity, ash composition, and carbon nanostructure of the GDI soot samples are analyzed using thermogravimetric analysis (TGA), scanning electron microscope–energy-dispersive spectroscopy (SEM-EDS), high-resolution transmission electron microscopy (HR-TEM), and Raman spectroscopy. Based on the analyses, a global GDI soot oxidation mechanism is proposed which includes the effects of soluble organic fractions (SOF)/weakly bonded carbon (WBC), and three types of ash on GDI soot oxidation. The results show that GDI soot contains an order of magnitude higher ash fraction than does conventional diesel soot, and oxidation reactivity is significantly enhanced by the catalytic effects of ash, as a function of ash content in soot. A modified empirical kinetic correlation for GDI soot oxidation is suggested on the basis of the results, and the modified kinetic correlation predicts the GDI soot oxidation rate accurately for various engine operation points at wide ranges of soot conversion and temperature without modifying kinetic parameters. The kinetic parameters are determined from isothermal and non-isothermal thremogravimetric analysis (TGA) soot oxidation tests; the methods are elucidated in detail.

33 ADVANCED PROPULSION SYSTEMS↗

Aggregate material formulated with MSWI bottom ash and APC fly ash for use as secondary building material

Highlights: ► A concrete formulation was optimized using Bottom Ash and APC ash. ► 10% of APC ash achieves good compromise between economic and performance aspects. ► The crushed concrete was evaluated as secondary building granular material. ► The environmental behavior allows its use as secondary material. ► The abrasion resistance is not good enough for its use as a road sub-base material. - Abstract: The main goal of this paper is to obtain a granular material formulated with Municipal Solid Waste Incineration (MSWI) bottom ash (BA) and air pollution control (APC) fly ash to be used as secondary building material. Previously, an optimum concrete mixture using both MSWI residues as aggregates was formulated. A compromise between the environmental behavior whilst maximizing the reuse of APC fly ash was considered and assessed. Unconfined compressive strength and abrasion resistance values were measured in order to evaluate the mechanical properties. From these results, the granular mixture was not suited for certain applications owing to the high BA/APC fly ash content and low cement percentages used to reduce the costs of the final product. Nevertheless, the leaching test performed showed that the concentrations of all heavy metals were below the limits established by the current Catalan legislation for their reutilization. Therefore, the material studied might be mainly used in embankments, where high mechanical properties are not needed and environmental safety is assured.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Varying plant density and harvest time to optimize cowpea leaf yield and nutrient content

Plant density and harvest time were manipulated to optimize vegetative (foliar) productivity of cowpea [Vigna unguiculata (L.) Walp.] canopies for future dietary use in controlled ecological life-support systems as vegetables or salad greens. Productivity was measured as total shoot and edible dry weights (DW), edible yield rate [(EYR) grams DW per square meter per day], shoot harvest index [(SHI) grams DW per edible gram DW total shoot], and yield-efficiency rate [(YER) grams DW edible per square meter per day per grams DW nonedible]. Cowpeas were grown in a greenhouse for leaf-only harvest at 14, 28, 42, 56, 84, or 99 plants/m2 and were harvested 20, 30, 40, or 50 days after planting (DAP). Shoot and edible dry weights increased as plant density and time to harvest increased. A maximum of 1189 g shoot DW/m2 and 594 g edible DW/m2 were achieved at an estimated plant density of 85 plants/m2 and harvest 50 DAP. EYR also increased as plant density and time to harvest increased. An EYR of 11 g m-2 day-1 was predicted to occur at 86 plants/m2 and harvest 50 DAP. SHI and YER were not affected by plant density. However, the highest values of SHI (64%) and YER (1.3 g m-2 day-1 g-1) were attained when cowpeas were harvested 20 DAP. The average fat and ash contents [dry-weight basis (dwb)] of harvested leaves remained constant regardless of harvest time. Average protein content increased from 25% DW at 30 DAP to 45% DW at 50 DAP. Carbohydrate content declined from 50% DW at 30 DAP to 45% DW at 50 DAP. Total dietary fiber content (dwb) of the leaves increased from 19% to 26% as time to harvest increased from 20 to 50 days.

NASA Discipline Life Support Systems↗

Corn stover‐derived porous carbon for asymmetric supercapacitors

In this investigation, hydrothermal liquefaction‐derived hydrochar from pulverized corn stover (avg. particle size 1.12 mm and ash content 6.75 wt%) is chemically activated with aqueous KOH in the presence of Pluronic F127 surfactant and thermally treated further up to 800°C to generate porous carbon (POC) with higher specific surface area and porosity. POC obtained under different processing conditions is thoroughly characterized by Brunauer‐Emmett‐Teller surface area analyzer, Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Metallic impurity present in POC is characterized by inductively coupled plasma mass spectrometry. Higher specific surface area POC is observed with the use of the surfactant during the activation process. Fully characterized POC is used with (Mn, Ti)‐mixed oxide electrode to fabricate asymmetric supercapacitor (ASC). Specific capacitance of ASC is measured by cyclic voltammetry (CV) technique using Gamry G‐300 potentiostat/galvanostat/ZRA. CV plots are obtained with different voltage scan rates whereas galvanostatic charge‐discharge plots are studied by varying the current density. Renewable corn stover‐derived POC prepared using Pluronic F127/KOH activation method is found to be highly suitable as an electrode material because of higher capacitance and electrochemical stability over 100 charging‐discharging cycles.

25 ENERGY STORAGE↗

Integration of CO 2 capture and microalgae cultivation: demonstration assessment of outdoor Scenedesmus acutus cultivation using gaseous ammonia as a nitrogen source

Towards the goal of integrating CO 2 capture using aqueous ammonia with its utilization for algae cultivation, Scenedesmus acutus (UTEX B72) was grown in 1100 L open raceway ponds using CO 2 and NH 3 supplied from gas cylinders. CO 2 /NH 3 mole ratios of 7 and 10 were employed, the gas mixture acting as a surrogate for the output from a CO 2 scrubbing system using aqueous ammonia. Compared to Scenedesmus acutus grown in open ponds using gaseous CO 2 and NaNO 3 as the N-source, the ponds supplied with gaseous CO 2 and NH 3 displayed higher productivity at both CO 2 /NH 3 ratios, with the higher ratio providing the best growth. Depending on the culturing conditions and CO 2 /NH 3 ratio, CO 2 utilization ranged up to 15.8% and NH 3 utilization to 23.0%. These rather low values reflect the fact the high CO 2 /NH 3 feed rate used, resulting in a substantial release of NH 3 from the ORPs (~45%). Finally, these findings demonstrate the suitability of gaseous NH 3 as a N-source for microalgae cultivation, while highlighting the need for a control strategy that closely balances the CO 2 /NH 3 supply with the algae growth rate. The produced algae biomass possessed a high protein and low ash content, rendering it particularly suitable for use as a bioplastic feedstock.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring biofiber properties and their influence on biocomposite tensile properties

Biofibers serve as effective reinforcements for neat polylactic acid (PLA) in biocomposites, offering an attractive opportunity to decarbonize the manufacturing sector of the United States by displacing fossil-based reinforcement fibers such as carbon fibers. Also, biofiber production can stimulate economic growth in rural economies, fueling sustainable development. PLA resins are commonly compounded with biofibers to create biocomposites suitable for additive manufacturing. PLA-biofiber composites often exhibit better overall material properties than neat (pure) PLA, but the associations between biofiber properties and the material properties of their biocomposites remain largely unexplored. Hence, this research delves into a comprehensive exploration of diverse biofibers, scrutinizing their physical and chemical attributes, including size, shape, ash content and biochemical composition. The study meticulously analyzes the flow properties of each biofiber and elucidates the ultimate tensile strengths and Young's modulus of corresponding biocomposite samples. Noteworthy correlations between biofiber and biocomposite tensile properties are uncovered, shedding light on critical interrelationships. The study introduces an approach employing regression models to predict the ultimate tensile strength and Young's modulus of biocomposites. These models, validated with a cross-validation technique, exhibit remarkable predictive accuracy, particularly in estimating ultimate tensile strength. © 2024 Oak Ridge National Laboratory managed by UT-Battelle, LLC and The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

36 MATERIALS SCIENCE↗

Miscanthus × giganteus Responses to Nitrogen Fertilization and Harvest Timing in Illinois, USA

Renewable energy continues to be of interest in the USA due to concerns about the long-termed availability and the environmental impact of fossil fuels. Miscanthus × giganteus is a warm-season perennial bioenergy feedstock grass that has a long growing season, is high yielding, requires limited inputs, and will likely become an important renewable energy crop in the USA. This research studied the effects of N application rates and harvest timings on yields and biomass quality of a 4-year-old stand of M. × giganteus in Urbana, IL, USA. Plots received 0, 56, 112, 156, or 224 kg N ha –1 , and harvests were conducted at five dates between August and March in the 2009, 2010, and 2011 growing seasons. Miscanthus × giganteus production increased with N applications up to 112 kg ha –1 . Harvesting biomass before senescence, August through November, produced significantly more biomass compared to harvesting biomass after senescence. However, early harvest reduced biomass yields in the following years. Here, nitrogen fertilization compensated for the yield losses, but the yield gap between early and late harvest continually increased. Harvesting M. × giganteus after senescence optimized long-term productivity, reduced the need for N fertilization, and increased carbon and ash content in the harvested biomass, while harvesting before senescence not only removes N from the plant but also reduces remobilization of other nutrients and carbohydrates in autumn.

09 BIOMASS FUELS↗

Towards an Integrated Process for CO 2 Capture and Utilization: Cultivation of Scenedesmus acutus Using Gaseous CO 2 and NH 3

Integrating CO 2 scrubbing from flue gas with its utilization in algae cultivation represents a potential means of lowering the cost of CO 2 capture. Towards this goal, this study sought to assess the feasibility of using gaseous a CO 2 /NH 3 stream, derived from CO 2 capture using aqueous ammonia, as a C- and N-source for algae cultivation. Scenedesmus acutus was cultured in 800 mL photobioreactors using gaseous CO 2 /NH 3 in mole ratios varying from 7 to 18. Excellent growth of Scenedesmus acutus was observed, the average growth rate for CO 2 /NH 3 = 10 of 0.171 ± 0.015 g/L·day exceeding that obtained using 1% CO 2 /N 2 and urea as the N-source (0.099 ± 0.28 g/L·day). Under optimal growth conditions (CO 2 /NH 3 mole ratio of 10), CO 2 utilization ranged from 57% to 72%, while the NH 3 utilization was >90%. The CO 2 /NH 3 feed rate was also found to exert a significant effect on algae productivity, excessive feed rates leading to accumulation of NH 3 in the culture at concentrations that were toxic to the algae. Consequently, to avoid the toxic effects of high NH 3 concentrations (>2.0 mM), it proved necessary to balance the NH 3 supply with the algae growth rate so that excessive NH 3 accumulation was prevented. This indicates that for practical applications, a CO 2 /NH 3 feed control strategy would be required that takes into account the ammonium ion concentration in solution and the pH so as to avoid significant concentrations of free NH 3 . Furthermore, analysis of the harvested biomass revealed a high protein (≥ 47 wt%) and a low ash content (< 3.6 wt%), suggesting it would be well suited for use as animal feed or as a feedstock for the production of bioplastics.

03 NATURAL GAS↗

Evaluation of near-ambient algal biomass fractionation conditions for bioproduct development

This contribution describes an algal fractionation scheme based on cell lysing and carbohydrate hydrolysis under acidic conditions, coupled with solvent extraction, that produces algal lipids, carbohydrates, and proteinaceous solid from partially dewatered algal biomass. Here, a design of experiments analysis was employed to identify the effect of fractionation conditions on the yields of the three product streams. By selection of appropriate conditions, the process can be steered from simple lipid extraction to near complete fractionation of the biomass. Lipid purification and upgrading were respectively achieved with a low-cost adsorbent and an inexpensive Ni-based catalyst that deoxygenated the lipids via decarboxylation/decarbonylation, an approach offering several advantages over the hydrodeoxygenation-based processes typically employed to convert lipids to hydrocarbons. The proteinaceous solids obtained were found to have much lower ash content as well as higher protein content relative to the untreated algae, enhancing the suitability of this material as a feedstock for the production of bioplastics.

09 BIOMASS FUELS↗

Comparative performance and technoeconomic analyses of two microalgae harvesting systems evaluated at a commercially relevant scale

Using a commercially scalable system designed for processing thousands of liters a day, here we evaluated the factors that affected the performance, energy consumption and capital/operating costs of both flocculation-based and filtration-based algal harvesting systems over a 16 month period. Coagulation efficiency was the primary driver of harvest efficiency in the flocculation-based method, while cell lysis was important for the filtration-based method. Culture (algae) age differentially influenced harvest efficiency through changes in cell fragility and stickiness. The average energy consumption of the flocculation-based method was 0.389 kWh/m 3 , while that for the filtration-based method was 4.343 kWh/m 3 . The average harvesting cost of the filtration-based method was 5.35 $\$$/m 3 , while for flocculation-based method it was 4.52 $\$$/m 3 . The concentration factor of filtration-based and flocculation-based method were 770–1086 and 407–448, respectively. For both harvesting methods, labor costs dominated and ranged from 55.84%–67.94% of total cost. Further system automation is a potential method to lower the harvesting cost. The filtration-based harvesting method could produce a better quality of algal biomass with higher concentration factors and less ash content, but needed more energy input, as compared with a flocculation-based method. This study highlights the importance of algal culture status to successful harvesting, and it also provides insight into developing more efficient harvesting technology with lower energy and capital cost.

59 BASIC BIOLOGICAL SCIENCES↗

Design and scale-up of 3D printed bat houses with biomass-derived polymer composites

Biomass (e.g., pine sawdust, especially high–ash content pine sawdust) is commonly disposed of as waste. Combining biomass with polymers to make composite feedstocks for 3D printing has been explored as a method to reduce or repurpose the biomass waste. Although not all biocomposite properties are known, the wood-based polylactic acid (PLA) composite has promising qualities for applications in ecological settings. In this work, pine wood–PLA composite feedstock was used to 3D print supplemental roost structures for endangered tree-roosting bats, which often face a paucity of suitable naturally occurring roosts. This material combination was selected because it is estimated to degrade faster than the synthetic material systems that are used widely in supplemental bat roosting structures to aid in the conservation of tree roosting bats. The layered, rough surface created by the 3D printing process serves as a surface that bats can grip while roosting. Computer-aided design (CAD) models were generated based on natural roost structures, and a full-size bat house was successfully additively manufactured using a pellet-fed large-scale 3D printing system. The 3D printed hexagon exhibited a tensile strength of 22–23 MPa and a Young’s modulus of 3202–3218 MPa in the x-direction. It has been demonstrated that the 3D printed bat house can be installed on a tree in a stable fashion. This successful demonstration of a bat roost manufactured using a bioderived composite should promote its use in other fish and wildlife structures and broader industrial applications such as construction and automobiles.

3D printing↗

Highly crystalline, low-ash, graphite from coal using an Fe 2 O 3 -based catalytic process with recovery and reuse of catalyst and process acid

This study presents a sustainable process for producing highly crystalline, low-ash graphite from sub-bituminous coal using an Fe 2 O 3 -based catalytic method. The process integrates coal mineral removal, catalyst regeneration, and reagent recycling into a closed-loop system. Acid-soluble Fe-residue and mineral impurities are eliminated from the solid graphite through HCl treatment, followed by hydrolytic distillation to regenerate Fe 2 O 3 and recover HCl for reuse. Coal-derived silica is removed with a KOH rinse, yielding low-ash graphite suitable for high-performance applications. The closed-loop catalytic graphitization, where the recovered Fe 2 O 3 and HCl are used in subsequent graphitization runs, produces graphite with a degree of graphitization exceeding 95%. The L a and L c crystallite sizes reach 65–78 nm and 44–48 nm, respectively, with BET surface areas of 4–10 m 2 /g and an ash content below 0.1 wt.%. Lithium-ion battery testing reveals that anodes fabricated with this graphite deliver an initial discharge capacity between 384.5 and 421.2 mAh/g, averaging 395.0 ± 19.1 mAh/g, along with initial coulombic efficiencies of 85.0–89.1%. After 100 discharge–charge cycles at 0.25C, reversible capacities remain between 358.8 and 369.7 mAh/g, while coulombic efficiency stays above 99.9%. The findings highlight that coal can serve as a viable precursor for high-quality graphite production under relatively mild conditions, avoiding the need for extreme temperatures or aggressive reagents such as hydrofluoric acid, commonly employed in conventional processes. This work demonstrates both technical feasibility and environmental benefits, emphasizing its potential to support large-scale, sustainable graphite production for applications such as lithium-ion batteries.

Catalytic graphitization↗

An attached microalgae platform for recycling phosphorus through biologically mediated fertilizer formation and biomass cultivation

Nutrient management is a global challenge for protecting water bodies from eutrophication and for retaining and sustainably recycling phosphorus within the biosphere. This challenge is especially important for water resource recovery facilities (WRRFs) in jurisdictions that limit nutrient loads in plant effluent. A microalgae-based biofilm platform has been designed, constructed, and tested to remove phosphorus and nitrogen from anaerobic digester (AD) effluent filtrate through cultivating biomass and inducing the precipitation of a mineral called struvite (NH₄MgPO₄ · 6H₂O) using a rotating algae biofilm reactor (RABR). RABRs function by rotating a growth substratum through nutrient rich water and then into the atmosphere, immersing microalgae in both sunlight and water. Photosynthesis is utilized in RABR operation to enhance struvite formation by increasing the pH value within the biofilm through the uptake of carbon dioxide from solution. Measurements of pH trended higher with depth through the biofilm when exposed to light confirming the function of photosynthesis in increasing pH and, as a consequence, struvite formation. In addition, reducing RPM allows more time for water to evaporate through exposure of the biofilm to the atmosphere and provides a management option to exceed struvite solubility product. Struvite precipitation was predicted based on chemical analysis and MINTEQ modeling of ADE, was confirmed using Scanning Electron Microscopy and Energy Dispersive X-ray Spectroscopy, and quantified by determining ash content. Increase in pH within the biofilm was confirmed as photosynthetic photon flux density increased. While struvite precipitation and removal from wastewater is conventionally accomplished through physicochemical methods, this research is the first report of struvite enhanced formation through algae biofilm-based photosynthesis processes.

09 BIOMASS FUELS↗

Kinetic modeling of the formation and growth of inorganic nano-particles during pulverized coal char combustion in O 2 /N 2 and O 2 /CO 2 atmospheres

In this formation of nano-particles during coal char combustion, the vaporization of inorganic components in char and the subsequent homogeneous particle nucleation, heterogeneous condensation, coagulation, and coalescence play decisive roles. Furthermore, conventional measurements cannot provide detailed information on the dynamics of nano-particle formation and evolution, In this study, a sophisticated intrinsic char kinetics model that considers ash effects (including ash film formation, ash dilution, and ash vaporization acting in tandem), both oxidation and gasification by CO 2 and H 2 O, homogeneous particle nucleation, heterogeneous vapor condensation, coagulation, and and coalescence mechanisms is developed and used to compare the temporal evolution of the number and size of nano-particles during coal char particle combustion as a function of char particle size, ash content, and oxygen content in O 2 /N 2 and O 2 /CO 2 atmospheres .

01 COAL, LIGNITE, AND PEAT↗

Sustainable Li-ion anode material from Fe-catalyzed graphitization of paper waste

We report a novel method for the conversion of paper towel waste to biographite anode material is developed and optimized for use in Li-ion batteries. The surge in demand for Li-ion battery anode materials coupled with the unsustainable and inefficient methods of producing battery-grade graphite necessitate alternative carbon feedstocks and graphitization technologies. Paper waste (PW) is identified as a suitable carbon feedstock for iron-catalyzed graphitization due to its sustainability, low cost, low ash content, and ample supply for the intended end use. A Box Behnken experimental design for statistical optimization is pursued for untreated and pre-carbonized PW with factors of temperature (1100-1300 °C), hold time (1-5 h), and iron catalyst loading (0.5-1.5x fixed carbon content) with biographite crystal size as the primary response variable. Temperature and iron catalyst loading are found to be significant factors, whereas hold time is found to be insignificant. Reversible capacities of the biographite anodes are found to be 340-355 mAh g-1 with 99% capacity retention over 100 cycles, indicating good electrochemical performance relative to commercial graphite anodes. The initial Coulombic efficiency of untreated and pre-carbonized biographites, however, are 77% and 75%, respectively, suggesting parasitic reactions including electrolyte decomposition.

25 ENERGY STORAGE↗

A decomposition approach based on meta-heuristics and exact methods for solving a two-stage stochastic biofuel hub-and-spoke network problem

An alternative to the production of fossil transportation fuels is the production of biofuels, particularly, bioethanol. One of the main opportunity areas is the reduction in the overall cost of biofuel. An approach to reduce this cost is to design and implement a supply chain (SC) that considers the quality-related properties of the biomass as well as the economies of scale to minimize the logistics and quality-related costs. This problem is formulated as a hub location problem, which has been classified as an NP-hard problem, thus, meta-heuristics are a suitable approach to solve this problem. We propose a hybrid meta-heuristic solution procedure to solve large-scale instances of a two-stage stochastic biomass-to-biorefinery hub-and-spoke network problem. This solution procedure is proposed to support the large-scale production and distribution of bioethanol by considering the variability in its moisture and ash contents. The hybrid method utilizes a simulated annealing-simplex method to find an initial solution and a tabu search-simplex method to improve the solution. Numerical experimentation was performed on a realistic case study in Texas. The findings demonstrate that the hybrid procedure outperforms the standard L-shaped (LS) method. The meta-heuristic combining simulated annealing and tabu search with the simplex method (SATS-SM) achieved 2.48% lower costs and required 96.57% less time, on average, when compared to the results from using the LS.

09 BIOMASS FUELS↗