Search NASA⌕ Search

SEARCH · Search NASA

Results for “Component Of The Project”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Exascale workflow applications and middleware: An ExaWorks retrospective

Exascale computers offer transformative capabilities to combine data-driven and learning-based approaches with traditional simulation applications to accelerate scientific discovery and insight. However, these software combinations and integrations are difficult to achieve due to the challenges of coordinating and deploying heterogeneous software components on diverse and massive platforms. Here, we present the ExaWorks project, which addresses many of these challenges. We developed a workflow Software Development Toolkit (SDK), a curated collection of workflow technologies that can be composed and interoperated through a common interface, engineered following current best practices, and specifically designed to work on HPC platforms. ExaWorks also developed PSI/J, a job management abstraction API, to simplify the construction of portable software components and applications that can be used over various HPC schedulers. The PSI/J API is a minimal interface for submitting and monitoring jobs and their execution state across multiple and commonly used HPC schedulers. We also describe several leading and innovative workflow examples of ExaWorks tools used on DOE leadership platforms. Furthermore, we discuss how our project is working with the workflow community, large computing facilities, and HPC platform vendors to address the requirements of workflows sustainably at the exascale.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

VECTOR Phase 1 Dataset: CAV Trajectory and Energy Consumption Records

This dataset contains benchmark experimental data from Phase 1 of the VECTOR project, focusing on the energy impact of CAV hardware components. The dataset includes vehicle trajectory data (speed and position) and corresponding energy consumption records collected from a CAV platform equipped with lidar, cameras, onboard computation units, and communication modules. The primary objective is to quantify the baseline energy consumption attributable to sensing and computing systems, independent of any advanced cooperative control strategies. During experiments, the leading vehicle followed a predetermined velocity profile, and the following CAV mirrored this trajectory using a basic car-following control to ensure consistent driving behavior. This setup enables a reliable benchmark for assessing the energy cost introduced by onboard CDA hardware (e.g., lidar and GPU-based processing). The dataset is essential for evaluating energy baselines and supports future comparative studies involving additional cooperative strategies. ![system img](system.png) ![vector img](vector.png)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Novel Microbial Routes to Synthesize Industrially Significant Precursor Compounds

Ethylene is the most widely employed organic precursor compound in industry. The potential to impact ethylene formation via recently discovered microbial processes is tenable using plentiful CO2 feedstocks. The overall long-term objective of this project was to develop an industrially compatible microbial process to synthesize ethylene in high yields. The key objective of this project was to fully define and initially characterized a recently discovered and genetically regulated anaerobic pathway to produce high levels of ethylene called the Dihydroxyacetone Phosphate - Ethylene Pathway in phototrophic bacteria. This was addressed through the following specific aims: 1. Fully probe the catalytic potential of all enzymes of the DHAP ethylene pathway and determine the regulatory mechanism of DHAP-ethylene pathway gene expression. 2. Discover effective and active ethylene enzymes encoded in cultured and uncultured organisms from anoxic environments. 3.Model the thermodynamics and kinetics of ethylene synthetic pathways to guide engineering efforts in integrating best performing DHAP-ethylene pathway enzymes into model bacteria chassis for enhance ethylene yields. Through this project we discovered the initially missing genetic and enzyme component of the DHAP-ethylene pathway that directly synthesized ethylene and other important industrial compounds like methane and ethane from specific substrates. We uncovered and partially characterized a nitrogenase-like reductase that functions in DHAP-ethylene pathway specifically and in methionine synthesis in general. This nitrogenase-like system is called the Methylthio-Alkane Reductase (MAR) for its ability to cleave volatile organic sulfur compounds into methanethiol (CH3-SH) for methionine synthesis and a hydrocarbon byproduct. Key to the DHAP-ethylene pathway, MAR is the essential enzyme that cleaves 2-methylthioethanol (CH3-S-CH2-CH2-OH) into ethylene. Coordinately, we uncovered that the MAR genes and genes associated with conversion of methanethiol (CH3-SH) to methionine are under genetic control of a LysR Type Transcriptional Regulator called SalR, whose activity is dependent upon the amount of sulfate available to the cell. When sulfate as the preferred sulfur source for cell growth drops below 200 micromolar, SalR become active for expressing the MAR and methionine biosynthesis genes to enable the cell to grow from volatile organic sulfur compounds and make ethylene. Metabolic thermos-kinetic modeling revealed that these MAR reactions for ethylene and other hydrocarbon production are highly thermodynamically favorable and are one of the largest driving forces for ethylene production by the DHAP-ethylene pathway for high ethylene yields. Modeling also indicated that a key aldolase and to a lesser extent an isomerase of the DHAP-ethylene pathway for production of the ethylene precursor, 2-methylthioethanol, also would increase ethylene yields. Through metagenomic mining and gene synthesis by the JGI DNA synthesis program, over 500 aldolase and isomerase homologs were synthesized and screened. From this, variants were uncovered with substantially higher activity that increased ethylene yields 5-fold via the aldolase reaction and 1.5-fold via the isomerase reaction. Each of these elements that increase ethylene production were integrated together via plasmid under appropriate gene promoter elements in the phototrophic bacterium, Rhodospirillum rubrum, resulting in at least 3 orders of magnitude increase in ethylene yield from carbon dioxide feedstock.

10 SYNTHETIC FUELS↗
DOE OSTI2024

Thermomechanical Behavior of Advanced Manufactured Parts, Subcomponents, and Their Weldments for Gen3 CSP

Generation 3 (Gen3) concentrating solar power (CSP) plants may require the use of molten chloride salt storage systems, solar receivers, and supercritical-CO 2 primary heat exchangers (PHX). The temperatures that would be expected in these parts and subcomponents could approach 760°C for hot side and 500°C for cold side at peak operating conditions. With the design limitations, highly corrosion- and creep-resistant alloys are needed for maximizing component lives. This report presents the results for the project "Thermomechanical Behavior of Advanced Manufactured Parts, Subcomponents, and their Weldments for Gen3 CSP", award number DE-EE00036334. In this project, creep enhanced ferritic alloy Grade 91, austenitic stainless-steel (SS) 304H, Ni claddings Ni201 and C22, and nickel-based superalloys Inconel 740H and Haynes 282 and 230 were evaluated for potential applications in Gen3 CSP systems. Advanced manufacturing of these parts, subcomponents and their welds, was investigated and a full technoeconomic analysis was made in comparison to conventional manufacturing techniques. The manufacturing techniques explored are explosion clad welding and combustion synthesis/combustion reaction for transfer pipes, additive manufacturing (AM) including laser-powder bed fusion (L-PBF) and electron beam AM (EBAM) with wire feedstock for PHX and solar receivers, and conventional fusion welding for similar and dissimilar joining of these various parts and subcomponents.

14 SOLAR ENERGY↗
DOE OSTI2025

Uranyl Capture and Activation with Lewis Acids and Macrocyclic Hosts (Final Technical Report)

This document is the final report for the project with the title, “Uranyl Capture with Lewis Acids and Macrocyclic Hosts.” Nuclear power is attractive for meeting the current and future energy needs of society, in that it does not release carbon dioxide or other pollutants into the atmosphere during routine use. This motivated the project, because preparation of nuclear fuel, recovery of useful components from used fuel, and handling of waste materials remain significant impediments to further deployment of important nuclear technologies. In part, these problems arise from limited availability of chemical reactions that can reliably interconvert forms of uranium and other heavy elements during preparation and processing. For example, harsh and expensive chemicals are often required for making and breaking chemical bonds to uranium, and the reactions involved are inefficient. The overall objective of this research was to harness knowledge of chemical structure and bonding to develop a useful and predictive und

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High Temperature Additive Architectures for 65% Efficiency (Final Technical Report)

This project aimed to develop advanced high-temperature additive components that contribute towards the DOE’s goal for advanced gas turbines that are capable of at least 65% efficiency in combined cycle application. The objective was to leverage state-of-the-art additive manufacturing to develop an innovative stage 1 turbine nozzle (S1N) that can provide cooling flow savings while maintaining the component durability expected in today’s gas turbines. The program had two phases. Phase I was a conceptual phase for novel advanced cooling designs enabled by additive manufacturing, as well as proposals for validation. Phase II included execution of the Phase I conceptual design, including manufacturing of prototype hardware and validation within an environment that is similar to engine operation. During Phase I of the program, the team devised a concept to reduce cooling air usage. The cooling air used in the side walls is filmed out along the side walls, while the cooling air used in the airfoil is eventually directed to near-wall channels and exits holes along the airfoil trailing end. During this program, the team performed additive trials to analyze the geometric limitations of additive manufacturing. This helped the team understand minimum wall thicknesses, hole sizes, and cooling channel dimensions among other limits. Phase II of this program pushed GE Vernova beyond its previous experience of designing and manufacturing an additively manufactured hot gas path component. Modern hot gas path components utilize material chemistries that are traditionally hard to weld, such as cast Renè 108, and exhibit solidification cracking when additively manufactured using Direct Metal Laser Melting (DMLM). Note that AM108 is a powder form of Renè 108. A S1N with advanced cooling is larger and more complex than parts previously built by additive manufacturing and required new learnings to resolve risks around solidification cracking. Finally, the team validated the design in a combustion rig that replicated operation in a gas turbine. In order to properly quantify the benefits of the new additive design, a baseline was also tested in the rig and operated under the same conditions. In addition, an uncertainty analysis was done to quantify any sources of error that could impact the results. At the end of the validation effort, it was determined that the additive nozzle exceeded the 15% reduction in cooling flow goal even with the worst-case assumptions for uncertainty.

03 NATURAL GAS↗
DOE OSTI2025

Synthesizing, Compounding, and Characterizing a Heat Labile Foam (SRNL-STI-2025-00653)

Degradable polyurethane foams can be an attractive material to use for packaging, transporting, and dispositioning of nuclear materials. This LDRD project explored the possibility of finding a suitable polyol component that would achieve the intended results. Significant improvements were made on the initial findings of a three month Visiting Faculty Program.

Kranjc, Mark D. [Savannah River National Laborator↗
DOE OSTI2026

Developing a Digital Twin for SRF Cavity Assembly at Fermilab

When assembling Superconducting Radio Frequency (SRF) Cavities, maintaining an environment devoid of particulates like dust and other small particles is essential. If a single spec of dust enters the cavity a significant degradation of performance can occur. To avoid a cavity failure Fermilab assembles the SRF cavities within a ISO-4 (Class 10) environment. This environment though is still susceptible to foreign contaminants when technicians enter and new components are added to the cleanroom. To reduce the risk even more Fermilab has introduced a cobot manipulator into the cleanroom environment to speed up the assembly time which will reduce the time that the technicians operate in the cleanroom. But, this still leaves the potential of contaminants to enter the cleanroom if new components need to be tested within the cleanroom. This project aims to lay the groundwork to develop a Digital Twin environment of the cleanroom to aid in manufacturing processes and testing. In its simplest form, a digital twin is a bidirectional link between a physical system and its digital counterpart or twin. NVIDIA Isaac Sim is used as the digital twin foundation for the digital representation of the cleanroom, specifically for the UR16e assembly area. A simulated UR16e was used to validate the performance of Isaac Sim as a testing environment by comparing the tool center points (TCP) positional data between the simulated and digital representation of the UR16e. Due to a new vision based robotic assembly process being introduced to the cleanroom a digital representation of the physical camera was tested and validated to ensure that it will produce close to the same outcome as the physical environment. The TCP comparison results showed a peak translational error of approximately 0.1mm and rotational errors of up to 8 between the simulated and digital UR16es. While the camera validation performed with high repeatability across multiple runs, it still requires minor tuning before it can accurately replicate a physical camera.

Imburgia, Joseph [Northern Illinois U.]↗
DOE OSTI2025

Resilient Operation of Networked Community Microgrids with High Solar Penetration

This project, funded by the US Department of Energy’s Solar Energy Technologies Office (SETO), focused on the operation of microgrids as a coordinated network. The primary objective, which was successfully achieved, was to develop both control strategies and hardware solutions to support the resilient and efficient operation of networked microgrids with high solar penetration. The work was structured around the following four main tasks: • Development of distributed and scalable optimization algorithms for AC-coupled networked microgrids. • Design and implementation of a novel DC interconnection hardware to enable precise power exchange between microgrids. • Laboratory operational validation of the developed technologies using 480 V testbeds and commercially available hardware. • Field operational validation of the complete solution in Adjuntas, Puerto Rico, interconnecting two kW-scale, split-phase microgrids of Casa Pueblo’s microgrids. This project addressed multiple technical challenges across the domains of optimization, control, hardware interconnection, and protection. One of its key contributions was delivering tangible, real-world solutions for networking microgrids. In contrast to purely theoretical or simulation-based work, this project included full-scale hardware operational validation both in the lab and in the field. The work conducted as part of this project—in collaboration with the University of Puerto Rico; the University of Tennessee, Knoxville; the University of Central Florida; and Casa Pueblo—has advanced the state of the art in networked microgrids. Key contributions include the development of distributed control strategies, practical solutions for real-world implementation challenges, and the introduction of a novel DC interlink approach for microgrid interconnection. The project featured both laboratory and field validation using commercial off-the-shelf components. The field deployment successfully validated that a group of microgrids can operate in a coordinated manner, enabling precise power flow between systems and mutual support during extreme events. This project resulted in 15 journal publications and 15 conference papers; 5 graduate students and 15 undergraduate students were supported. The codes of distributed optimization and forecasting were made open-source through OSTI.gov for distributed optimization and forecasting. All the publications are available in the ORNL-hosted project landing page. The DC interlink with state-of-charge balancing control was operationally validated in Adjuntas by interconnecting two real-world, 240 V split-phase microgrids. To the best knowledge of the team, this represents the first operational validation of AC microgrids interconnected via DC-interlinks. As a culmination of this project, a follow-on grant was awarded to support the technology transfer of the distributed optimization framework to a commercial microgrid controller, Stellar Edge, developed by the California-based company New Sun Road.

14 SOLAR ENERGY↗
DOE OSTI2024

High-resolution modelling identifies the Bering Strait’s role in amplified Arctic warming

The Arctic region has warmed nearly four times faster than the global average since 1979, with far-reaching global implications. However, model projections of Arctic warming rates are uncertain and one key component is the ocean heat transport (OHT) into the Arctic Ocean. Here we use high-resolution historical and future climate simulations to show that the OHT through the Bering Strait exerts a more substantial influence on Arctic warming than previously recognized. The high-resolution ensemble exhibits a 20% larger warming rate for 2006–2100 compared with standard low-resolution model simulations. The enhanced Arctic warming in the high-resolution simulations is primarily attributable to an increased OHT through the narrow and shallow Bering Strait that is nearly four times larger than in the low-resolution simulations. Consequently, the projected rate of Arctic warming by low-resolution climate simulations is likely to be underestimated due to the model resolution being insufficient to capture future changes in Bering Strait OHT.

Xu, Gaopeng (ORCID:0000000283521818)↗
DOE OSTI2025

Prototype Development for MBSE-Driven Digital Environment at Fermilab

Complex projects like Fermilab s accelerators and detectors involve thousands of interdependent components and requirements, making traditional documentation hard to keep consistent and often causing rework. Model-Based Systems Engineering (MBSE) tackles this by representing the system as a digital, queryable model. While widely used in aerospace and safety-critical industries, MBSE adoption has been limited elsewhere due to steep learning curves and high costs. This project investigates how a web-first, low-code MBSE stack can reduce those barriers and offer an accessible, unified source of truth for engineers and physicists.

Valle, Diego Pedro (ORCID:0009000865900663)↗
DOE OSTI2024

Extrapolation of Type Ia Supernova Spectra into the Near-infrared Using Principal Component Analysis

Abstract We present a method of extrapolating the spectroscopic behavior of Type Ia supernovae (SNe Ia) in the near-infrared (NIR) wavelength regime up to 2.30 μ m using optical spectroscopy. Such a process is useful for accurately estimating K-corrections and other photometric quantities of SNe Ia in the NIR. A principal component analysis is performed on data consisting of Carnegie Supernova Project I & II optical and NIR FIRE spectra to produce models capable of making these extrapolations. This method differs from previous spectral template methods by not parameterizing models strictly by photometric light-curve properties of SNe Ia, allowing for more flexibility of the resulting extrapolated NIR flux. A difference of around −3.1% to −2.7% in the total integrated NIR flux between these extrapolations and the observations is seen here for most test cases including Branch core-normal and shallow-silicon subtypes. However, larger deviations from the observation are found for other tests, likely due to the limited high-velocity and broad-line SNe Ia in the training sample. Maximum-light principal components are shown to allow for spectroscopic predictions of the color-stretch light-curve parameter, s BV , within approximately ±0.1 units of the value measured with photometry. We also show these results compare well with NIR templates, although in most cases the templates are marginally more fitting to observations, illustrating a need for more concurrent optical+NIR spectroscopic observations to truly understand the diversity of SNe Ia in the NIR.

Astronomy & Astrophysics↗
DOE OSTI2024

Weather effects on the lifecycle of U.S. Department of Defense equipment replacement (WELDER)

Extreme weather has a direct and significant impact on buildings and infrastructure, resulting in billions of dollars of damage each year. This problem continues to grow as climate patterns change and buildings are exposed to new and different hazards than what they were designed to withstand. In order to better plan for the long-range sustainment, restoration, modernization, and eventual recapitalization of these buildings, organizations with large building portfolios, such as the U.S. Department of Defense (DoD), must have an awareness of the risks that these extreme weather events present. This research aimed to develop an approach to estimate condition loss and reduction in service life for the components of a building due to extreme weather hazards, to understand the risks that may be present in certain buildings and building systems. To achieve this objective, a damage association matrix was developed that categorizes climate hazards, the damage modes that they produce, and the individual component types impacted. This damage matrix formally links state-of-the-art climate model output, which provides projections of the probability of various climate hazards with a damage effects model that quantifies the consequence on component-level condition and service life. This method is applied to an actual portfolio of buildings in a particular geographic location and with a pre-defined component inventory that comprises the building. This approach can be aggregated to the system-, facility-, and site-level thus helping support billions of dollars in recapitalization decisions related to restoration/modernization of facilities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Lifetime Energy Savings Via Advanced Manufacturing of Low Density Steels for Transportation Applications

The purpose of this “Low Density Steels for Transportation Applications” project was to develop an alloy composition and processing parameters that would result in a material suitable for use in automotive structural components at a reduced density over the current advanced high strength steel (AHSS) materials used. The project work successfully developed a robust alloy capable of exceeding project mechanical property targets at each stage of development, with an 8% density reduction over benchmark AHSS materials (7.8 g/cm3). The developed alloy has the potential to offer significant vehicle lightweighting and improved fuel economy, without sacrificing the increased passenger safety of more traditional AHSS. Through the three tasks of the project, (1) Alloy design and small-scale laboratory evaluation, (2) Laboratory development of hot rolled material and (3) Laboratory development of a cold rolled material, the laboratory work utilized advanced characterization and analytical methods on novel alloy compositions subjected to both conventional and non-conventional processing operations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Crustal Deformation and Gravitational Effects From Dynamic Ocean Mass Redistribution Impact Projected Sea‐Level Change

As the climate warms, associated changes in ocean dynamics will redistribute sea‐water mass within the ocean, contributing to relative sea‐level change. This mass redistribution will cause additional sea‐level changes due to gravitational self‐attraction, deformation of the solid Earth, and shifts in the Earth's rotation axis (GRD), which are not incorporated in sea‐level projections. Using CMIP6 climate model output, we quantify relative sea‐level changes induced by GRD from ocean‐dynamic mass loading through 2100. These effects act to amplify projected ocean‐dynamic sea‐level patterns, causing sea‐level rise in coastal regions, particularly along wide continental shelves and at high latitudes. On average, the magnitude of such GRD‐induced sea‐level change is equivalent to ∼15% of the signal due to dynamic ocean mass redistribution. Although our results show substantial inter‐model spread, they reveal that GRD‐induced relative sea‐level changes from ocean mass redistribution represent a non‐negligible component of regional sea‐level change and should be considered in projections.

58 GEOSCIENCES↗
DOE OSTI2026

NGEE Arctic Integrated Modeling (IM2): Improved subgrid hillslope hydrologic connectivity

This data product represents the integration of new code capability for arctic tundra hillslope hydrologic processes into the Energy Exascale Earth System Model (E3SM), through the E3SM Land Model (ELM) component. This code integration is the result of collaborative effort between the NGEE Arctic project and the E3SM project. The current ELM represents water movement primarily through vertical processes, such as precipitation, canopy interception, evaporation, infiltration, and soil water movement. Lateral water movement—such as surface runoff, subsurface flow, and river transport—plays a significant role in the hydrological cycle, especially in regions with varied topography. While E3SM includes a runoff routing component representing water transport in the river network, the lateral transport of water at the subgrid scale within the land model has previously not been taken into account. With the recent development of topographic units within the ELM subgrid data structure, there is an opportunity to simulate hillslope hydrologic connectivity by introducing water transport along topographic gradients. We expect that more realistic representation of hillslope hydrologic processes will lead to improved predictions of both soil water content and river network flows. Lateral transport of water at and near the surface is represented as a sub-grid process in this new code development. Water is tracked as it moves from higher to lower elevations within a gridcell. This capability uses the nested hierarchical sub-grid scheme within ELM to connect water fluxes from sub-grid elements with higher elevation to those with lower elevation. This data record consists of a single document (pdf format) that describes the theoretical basis for the hillslope hydrology processes added to ELM, and describes the modifications made to the ELM code. The Methods section of this metadata record includes a link to the public E3SM code repository where the exact code modifications as integrated in E3SM can be accessed. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

Thornton, Peter E [ORNL] (ORCID:0000000247595158)↗
DOE OSTI2024

RAFT: Reconfigurable Array of High-Efficiency Ducted Turbines for Hydrokinetic Energy Harvesting

Diversifying the energy harvesting portfolio is crucial to achieving the ambitious goal of transitioning to clean energy by 2030. Marine hydrokinetic energy has garnered renewed interest due to its high harvesting potential in the U.S., and the resource's reliability and predictability—remaining relatively constant on a daily basis and available 24/7. However, there are currently few commercial devices capable of harnessing the energy from flowing water. This project aims to bridge that gap by designing and evaluating a novel hydrokinetic turbine concept that can efficiently harvest energy from both rivers and tidal streams. The RAFT (Reconfigurable Array of High-Efficiency Ducted Turbines) concept introduces a duct surrounding the turbine rotor and creates an array of small 5-kW units. The duct serves two primary purposes: (1) it enhances hydrodynamic efficiency by accelerating flow to the rotor, and (2) it functions as a structural component, facilitating the formation of modular arrays that lower costs. This project focuses on demonstrating this concept and validating these benefits through simulations and scaled prototype testing. The project team includes 8 faculty members and over 20 students from 3 universities, organized into three core areas: hydrodynamics, electrical systems, and structural analysis, with additional teams dedicated to system integration, environmental assessment and risk management, and tech-to-market strategy. The team successfully demonstrated the increased hydrodynamic efficiency of a ducted turbine compared to an unducted version using high-fidelity simulations and prototype tests. Moreover, design optimization efforts led to surpassing the SHARKS program's goal of 60% reduction of the levelized cost of energy with a significant margin.

13 HYDRO ENERGY↗
DOE OSTI2024

Microstructural Engineering and Accelerated Test Method Development to Achieve Low Cost, High Performance Solutions for Hydrogen Storage and Delivery

This project made advancements in developing lower cost steel alloys with novel microstructural design for use in hydrogen refueling infrastructure such as storage, compressors, and dispensing components, and utilizing accelerated test methods to efficiently evaluate variations in alloy and microstructure design. The project specifically sought to design alloys with lower nickel contents to reduce alloy cost, which was accomplished through substituting manganese for nickel along with other alloy additions to control deformation characteristics known to be important for hydrogen embrittlement resistance. Through Mn substitutions for nickel, austenitic and duplex austenite-ferrite steels were successfully developed with lower cost than currently available commercial stainless steel products that are employed for hydrogen refueling infrastructure. The steels were processed to achieve comparable strength and toughness in hydrogen environments as the commercially available steels containing high Ni contents. To evaluate mechanical performance in hydrogen, a testing methodology was employed to compare ubiquitous laboratory testing using electrochemical hydrogen charging in a liquid electrolyte to less accessible high pressure gaseous testing. While the application of these steels is in high pressure gaseous environments, the electrochemical hydrogen charging tests produced comparable results. Additionally, the Los Alamos Neutron Scatting Center enabled characterization of deformation mechanisms of the steel alloys in the presence of hydrogen, which has been associated with steel alloy characteristics associated with hydrogen embrittlement. Finally, a fracture mechanics based test bed model was developed to predict the influence of hydrogen gas pressure and fatigue conditions on fatigue lifetimes of pressure vessel steels. Together, these developments can be employed to enable lower cost hydrogen fueling infrastructure and more reliable prediction of steel alloy components in hydrogen service conditions. In particular, the newly alloys have the potential to replace stainless steels, having demonstrated comparable performance at substantially reduced cost.

08 HYDROGEN↗