Search NASA⌕ Search

SEARCH · Search NASA

Results for “Isotopes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Direct and rapid uranium isotopic analysis of environmental sample swipes via microextraction – LS-APGD/Orbitrap mass spectrometry

Accurate and precise isotopic analysis of actinides collected on environmental sample swipes from within nuclear facilities is an important safeguarding measure for detecting undeclared materials and activities. Traditional isotope ratio (IR) analysis of actinides using a bulk digestion approach can be laborious and time-consuming. Recently, direct analysis of environmental swipe samples using a microextraction approach has been explored as an alternative to conventional bulk digestion methods. The present study further evaluates this approach for accurate and precise isotopic analysis of uranium (U) in cotton swipe samples using the liquid sampling-atmospheric pressure glow discharge (LS-APGD)/Orbitrap-FTMS Booster detection system. The instrumental parameters were optimized, and quantitative capabilities were demonstrated through excellent linearity (R2 = 0.99) across a deposited mass range of 1 to 500 ng, with a limit of detection of 90 pg (in a 2 × 4 mm region) for total U; well below typical U concentrations (ng–mg range) in environmental sample swipes. The 235U/238U ratio showed excellent accuracy (−0.3% relative difference from the certificate value), with ∼20× improvement over previous microextraction-Orbitrap methods. Precision (∼1% relative standard deviation) was also greatly enhanced by ∼5×. This study also demonstrates that figures of merit achieved with neat U solution were not highly degraded when various external interfering elements/matrices were introduced. Finally, the developed method was successfully applied to analyze practical swipe samples representative of laboratory and outdoor environments. The presented figures of merit and applicability to practical samples further validate the capability of the platform for rapid analysis (<7 minutes) of environmental swipe samples.

Shrestha, Suraj [Clemson University, SC]↗
DOE OSTI2024

Effects of hydrogen isotope species on ITG microturbulence in LHD

Abstract The linear and nonlinear effects of hydrogen isotope species on ion temperature gradient (ITG) instability in the Large Helical Device (LHD) stellarator are studied using radially global gyrokinetic simulation. We found that the coupling range of linear toroidal harmonics depends on the ion mass of the hydrogen isotope. The growth rates of ITG mode are almost the same for H, D, and T plasmas, indicating a gyro-Bohm scaling of ion-mass dependence. The nonlinear electrostatic simulations show that the zonal flow breaks the radially elongated eigenmode structures and reduces the size of the turbulence eddies, which suppresses the turbulence and the ion heat transport in the LHD. The turbulence amplitude without the zonal flow is almost the same for H, D, and T plasmas, while it decreases with increasing ion mass of the hydrogen isotope when the zonal flow is present. The reduction of the turbulent transport with larger ion mass is mostly due to the enhancement of zonal flows by larger ion mass. The ion heat conductivity deviates from the gyro-Bohm scaling for both cases with and without the zonal flow.

Physics↗
DOE OSTI2025

Impact of the isotope effect on divertor detachment and pedestal structure in DIII-D

Dedicated H-mode hydrogen experiments have been conducted at DIII-D and are compared to similar deuterium plasmas under a range of divertor conditions, revealing significant effects of the isotope mass on divertor and pedestal conditions. H-mode confinement is found to be systematically lower in hydrogen and experiences a worse degradation with increased fueling. This coincides with a higher ne,sep in hydrogen for similar fueling rates. When ne,ped is matched in hydrogen and deuterium as are the ne and Te pedestal structures, the target conditions deviate strongly from each other. An analysis of two major factors in the pedestal structure, pedestal stability and neutral fueling, shows they are not sufficient to explain either the pedestal differences between isotopes or the hydrogen pedestal structure respectively. An analysis of hydrogen and deuterium density ramps demonstrates a 20% higher ion current and a 30% higher upstream density at detachment onset in hydrogen. The characteristics of target heat flux and divertor radiation are shown to change significantly with the isotope mass in each divertor operational regime. The results shown here indicate divertor conditions trend with ion mass in a manner beneficial for divertor performance in future devices.

Mattes, Ray [Univ. of Tennessee, Knoxville, TN (Un↗
DOE OSTI2025

Level structure of light neutron-rich La isotopes beyond the 𝑁 = 82 shell closure

Here, the high spin excited states of Lanthanum isotopes 140–143 La, above the 𝑁 = 82 closed shell, were populated in fission reactions. The prompt 𝛾-ray transitions were measured using two complementary methods: (a) in coincidence with the isotopically identified fragments produced in the fission of the 238 U + 9 Be system using the Variable Mode Spectrometer (VAMOS++) and the Advanced Gamma Tracking Array (AGATA) spectrometer, and (b) high statistics threefold 𝛾−𝛾−𝛾 and fourfold 𝛾−𝛾−𝛾−𝛾 coincidence data from the spontaneous fission of 252 Cf using the Gammasphere. This work reports the first identification of a pair of parity doublet structures in 143 La and the new high spin level structure in 140–142 La from prompt 𝛾-ray spectroscopy. The level structures are interpreted in terms of the systematics of neighboring odd-𝑍 nuclei above the 𝑍 = 50 shell closure and large-scale shell model calculations. The present results indicate the presence of stable octupole deformation in 143 La. The excitation energy pattern and their comparison with neighboring isotones, moving away from the 𝑁 = 82 closed shell, point towards a transition from single-particle structures to an alternating parity rotational band structure in the La isotopic chain.

Navin, A. [Centre National de la Recherche Scienti↗
DOE OSTI2025

Measurement of the branching ratio of 16 N , 15 C , 12 B , and 13 B isotopes through the nuclear muon capture reaction in the Super-Kamiokande detector

The Super-Kamiokande detector has measured solar neutrinos for more than 25 years. The sensitivity for solar neutrino measurement is limited by the uncertainties of energy scale and background modeling. Decays of unstable isotopes with relatively long half-lives through nuclear muon capture, such as 16 N, 15 C, 12 B, and 13 B, are detected as background events for solar neutrino observations. Here, in this study, we developed a method to form a pair of stopping muon and decay candidate events and evaluated the production rates of such unstable isotopes. We then measured their branching ratios considering both their production rates and the estimated number of nuclear muon capture processes as Br⁡( 16 N) = (9.0 ± 0.1)%, Br⁡( 15 C) = (0.6 ± 0.1)%, Br⁡( 12 B) = (0.98 ± 0.18)%, Br⁡( 13 B) = (0.14 ± 0.12)%, respectively. The result for 16 N has world-leading precision at present and the results for 15 C, 12 B, and 13 B are the first branching ratio measurements for those isotopes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Hyperfine spectroscopy and laser cooling of the fermionic isotopes 47 Ti and 49 Ti

Here, we report on magneto-optical trapping of the two fermionic isotopes of atomic titanium, 47 Ti and 49 Ti . Unlike the even mass-number isotopes, which were recently laser cooled, 47 Ti and 49 Ti have nonzero nuclear spins and, consequently, their atomic levels are split by hyperfine structure. Combining and comparing theoretical calculations and atomic beam-spectroscopy measurements, we determine the hyperfine structures and isotope shifts of the 3⁢𝑑 2 ⁢4⁢𝑠 2 𝑎 3 ⁢𝐹 4 → 3⁢𝑑 2 ⁢( 3 𝑃)⁢4⁢𝑠⁢4⁢𝑝⁢( 3 𝑃 𝑜 ) 𝑦 5 ⁢𝐷$^o_4$ optical-pumping transition at optical wavelength 391 nm and the 3⁢𝑑 3 ⁢(4𝐹)⁢4⁢𝑠 𝑎 5 ⁢𝐹 5 → 3⁢𝑑 3 ⁢( 4 𝐹)⁢4⁢𝑝 𝑦 5 ⁢𝐺$^𝑜_6$ laser-cooling transition at wavelength 498 nm. With this information, we produce magneto-optical traps of both 47 Ti and 49 Ti by applying two additional tones of light to repump atoms to the maximum-spin states on the laser-cooling transition. Directly loading from the atomic flux of a titanium sublimation pump, we produce 47 Ti and 49 Ti traps with 731(190) and 1142(240) atoms, and with lifetimes of 330⁢(15) and 310⁢(8)⁢ ms, respectively.

atomic spectra↗
DOE OSTI2024

Magnetic dipole γ-ray strength functions in the crossover from spherical to deformed neodymium isotopes

We calculate the magnetic dipole $\gamma$-ray strength functions in a chain of even-mass neodymium isotopes $^{144-152}$Nd in the framework of the configuration-interaction (CI) shell model. We infer the strength function by applying the maximum entropy method (MEM) to the exact imaginary-time response function calculated with the shell-model Monte Carlo (SMMC) method. The success of the MEM depends on the choice of a good strength function as a prior distribution. We investigate two choices for the prior strength function: the static path approximation (SPA) and the quasiparticle random-phase approximation (QRPA). We find that the QRPA is a better approximation at low temperatures (i.e., near the ground state), while the SPA is a better choice at finite temperatures. We identify a low-energy enhancement (LEE) in the MEM deexcitation $M1$ strength functions of the even-mass neodymium isotopes and compare with recent experimental results for the total deexcitation $\gamma$-ray strength functions. The LEE is already seen in the SPA strength function but not in the QRPA strength function, indicating the importance of large-amplitude static fluctuations around the mean field in reproducing the LEE. Our method is currently the only one which can reproduce LEE in heavy open-shell nuclei where conventional CI shell model calculations are prohibited. With the onset of deformation as number of neutrons increases along the chain of neodymium isotopes, we observe that some of the LEE strength transfers to a low-energy excitation, which we interpret as a finite-temperature ``scissors'' mode. Here, we also observe a finite-temperature spin-flip mode.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Variations in the charge radii of indium isotopes between 𝑁=52 and 82

Measurements of the 5⁢𝑝 2 𝑃 3/2 → 9⁢𝑠 2 𝑆 1/2 and 5⁢𝑝 2 𝑃 1/2 → 8⁢𝑠 2 𝑆 1/2 transitions in the indium atom, combined with new atomic physics calculations, were used to extract the changes in mean-square nuclear charge radii, 𝛿⁡⟨𝑟 2 ⟩, of the indium (𝑍 = 49) isotopes 101–111 In , 113–123 In , and 125–131 In . With a proton hole in the closed nuclear shell of 𝑍 = 50, indium provides a detailed study of the effect of unpaired nucleons adjacent to the proton-shell closure, allowing investigation into the charge radii for isotopes between the two major neutron-shell closures at 𝑁 = 50 and 𝑁 = 82. A study of the variations in charge radii between neighboring isotopes with neutron number (the ‘odd-even staggering') is presented and provides further insight and challenges for the theoretical description of the size of proton-hole nuclei. Two nuclear theories, density functional theory and the valence-space in-medium similarity renormalization group method, were employed to interpret the data. The new information obtained in this work provides valuable insights into the successes and shortcomings of the theoretical approaches employed.

ab initio calculations↗
DOE OSTI2025

Probing New Bosons and Nuclear Structure with Ytterbium Isotope Shifts

In this Letter, we present mass-ratio measurements on highly charged Yb 42+ ions with a precision of 4 ×10 -12 and isotope-shift measurements on Yb + on the 2 S 1/2 → 2 D 5/2 and 2 S 1/2 → 2 F 7/2 transitions with a precision of 4 ×10 -9 for the isotopes 168,170,172,174,176 Yb. We present a new method that allows us to extract higher-order changes in the nuclear charge distribution along the Yb isotope chain, benchmarking ab initio nuclear structure calculations. Additionally, we perform a King plot analysis to set bounds on a fifth force in the keV/c 2 to MeV/c 2 range coupling to electrons and neutrons.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Charge Radii Measurements of Exotic Tin Isotopes in the Proximity of 𝑁 =50 and 𝑁 =82

We report nuclear charge radii for the isotopes 104–134 Sn , measured using two different collinear laser spectroscopy techniques at ISOLDE-CERN. These measurements clarify the archlike trend in charge radii along the isotopic chain and reveal an odd-even staggering that is more pronounced near the 𝑁 =50 and 𝑁 =82 shell closures. The observed local trends are well described by both nuclear density functional theory and valence space in-medium similarity renormalization group calculations. Both theories predict appreciable contributions from beyond-mean-field correlations to the charge radii of the neutron-deficient tin isotopes. The models, however, fall short of reproducing the magnitude of the known 𝐵⁡(𝐸⁢2) transition probabilities, highlighting the remaining challenges in achieving a unified description of both ground-state properties and collective phenomena.

laser spectroscopy↗
DOE OSTI2025

Charge radii measurements of exotic tin isotopes in the proximity of $N=50$ and $N=82$

We report nuclear charge radii for the isotopes $^{104-134}$Sn, measured using two different collinear laser spectroscopy techniques at ISOLDE-CERN. These measurements clarify the archlike trend in charge radii along the isotopic chain and reveal an odd-even staggering that is more pronounced near the $N=50$ and $N=82$ shell closures. The observed local trends are well described by both nuclear density functional theory and valence space in-medium similarity renormalization group calculations. Both theories predict appreciable contributions from beyond-mean-field correlations to the charge radii of the neutron-deficient tin isotopes. The models fall short, however, of reproducing the magnitude of the known $B(E2)$ transition probabilities, highlighting the remaining challenges in achieving a unified description of both ground-state properties and collective phenomena.

FOS: Physical sciences↗
DOE OSTI2025

Characterizing secondary neutrons at BLIP for isotope production applications

Fast secondary neutrons created at the Brookhaven Linac Isotope Producer (BLIP) facility following proton irradiation were characterized by the foil activation technique and compared with FLUKA Monte Carlo simulations. The FLUKA-simulated neutron flux was spectrally adjusted following the maximum entropy formalism using the International Reactor Dosimetry and Fusion File (IRDFF-II), with predictions agreeing with experimental measurements to within 9 % following the adjustment procedure. Here, a multitude of degrader configurations were simulated to assess the feasibility of improving the fast (E n > 20 MeV) secondary neutron yield at the proposed neutron target position (“N-slot”). A configuration where the N-slot is closest to the proton degrader produced the highest fast neutron yield, with tungsten degraders achieving the best performance. Assuming the optimized target-degrader configuration proposed in this work, we discuss potential isotope production opportunities with secondary neutrons. In most cases the yields are in the order of several mCi.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2024

Enhancing analytical merits of laser-induced breakdown spectroscopy of hydrogen isotopes using an orthogonal double-pulsing scheme

Accurate detection and quantification of hydrogen isotopes in solid materials are vital for diverse applications, including fusion energy, hydrogen storage, and tritium production. Laser-induced breakdown spectroscopy (LIBS) is a well established, rapid, standoff method for this purpose, but it faces challenges related to the analytical merits required for isotopic analyses. In this study, we enhance the analytical and detection capabilities of traditional single-pulse LIBS by implementing an orthogonal double pulsing approach, focusing on the analysis of a range of 2 H concentrations in Zircaloy-4 substrates (acting as a proxy for 3 H). The double-pulse experiments employed an orthogonal re-heating configuration with two nanosecond Nd:YAG lasers. We systematically evaluated critical parameters affecting the signal intensity in double-pulse LIBS, including interpulse delay, ambient gas pressure, and heating laser energy. Finally, our results demonstrate that employing an orthogonal double-pulse scheme significantly enhances 2 H α emission while minimizing line broadening and self-absorption, ultimately improving the technique’s analytical capabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Using Separation-Enhanced Isotope Ratio Mass Spectrometry to Enable Increased Renewable Carbon Content in Transportation Fuels (CRADA 525)

Stable isotope ratio measurements of carbon atoms using isotope ratio mass spectrometry (IRMS) can be an effective tool for quantifying biogenic carbon in co-processed fuels, with results approaching the precision and accuracy of accelerator mass spectrometry (AMS). The lower cost of an IRMS may enable deployment to refineries, improving access and analysis turnaround times (≤2 hours), and, by extension, provide data that can allow process optimization to maximize renewable carbon in desired refinery products. This project explored the integration of chemical separation with IRMS analyses to enable highly detailed tracking of biogenic carbon into fuel product streams separated by boiling point range, chemical class, or specific compound. Forty-nine fuels and fuel components of fossil and biogenic origin, spanning gasoline and diesel boiling point ranges, were received from three refiners and were analyzed for their δ 13 C values via IRMS. Results spanned a 13 C range from ca. 10‰ to 44‰ and reflect materials derived from sustainable sources (e.g., C4 or C3 plants, animal-based pathways, syngas) or from fossil-derived fuels. Common ranges are approximately 18‰ to 9‰ and approximately 30‰ to 20‰ for C4 and C3 plants, respectively, and approximately 34‰ to 24‰ and approximately 70‰ to 33‰ for petroleum-derived fuels and methane, respectively. Fuel-like standards were developed and tested using direct-injection elemental analyzer (EA) IRMS for liquid fuels. This method was compared with the published methods, yielding statistically similar results. Four blend curve sets were produced ranging from 0% to 100% of a fuel containing biogenic carbon, focusing on 0% to 10% biogenic carbon. Linear fits were the most applicable for two of the four blend curve sets; however, two sets were found to exhibit slightly quadratic behavior, which was more pronounced in low biogenic blend samples, necessitating second-order fits. The origin of the slight quadratic behavior remains unclear; however, the discussion points to possible interpretations. CanmetENERGY thoroughly characterized a majority of the samples using one- and two-dimensional gas chromatography (GC and GC×GC, respectively) and other analyses. Selected samples were subjected to solid phase extraction (SPE) for saturate, olefin, aromatic, and polar (SOAP) analysis, and the resulting solvent-diluted fractions containing saturates and aromatics were returned to Pacific Northwest National Laboratory (PNNL), where the solvent was removed via evaporation or physical separation using GC techniques. Characterization and separations provided an understanding of saturate and aromatic content, as well as boiling point ranges for each sample and sample fraction. Samples resulting from SPE were examined using EA-IRMS and gas chromatography combustion IRMS (GC-C-IRMS) analyses. Both approaches suggest that the range in values between end-members can be increased by selecting the paraffinic or aromatic fraction of the end-member or by selecting among individual compounds resulting from GC separation of the paraffinic fractions. Considerable work remains to put these approaches into practice and statistically validate the benefit for using a fraction or individual compound over bulk analysis of a sample. However, initial results suggest that separations provide advantages for samples having blend ratios of less than 10% biogenic blendstocks. 13 C results showed statistically similar biofuel blend results to those obtained at PNNL, although additional work is needed to obtain better reproducibility. Select samples were sent to Los Alamos National Laboratory (LANL) for IRMS measurements and Beta Analytics for AMS measurements. This work suggests that IRMS and AMS yield closely comparable results and in some circumstances, IRMS could serve as a surrogate for AMS. While additional work is needed to better resolve statistical advantages for separations and better show the comparable nature of IRMS and AMS in both the biogenic carbon analysis of bulk chemical classes, initial results from this study suggest that these should be pursued in order to proliferate this approach for quantifying biogenic carbon in transportation fuels to the refinery level, thereby potentially enabling process optimization in co-processing scenarios.

09 BIOMASS FUELS↗
DOE OSTI2026

Novel Method for Domestic Stable Isotope Production

This report presents the progress achieved on our chlorine isotope separation efforts in the CRADA #667 agreement. We used a microchannel distillation (MCD) packing structure to enrich HCl isotopes (H35Cl, H37Cl) and an isotachophoresis (ITP) separation to enrich ionic chloride species ( 35 Cl- and 37 Cl-). A 2 m tall MCD column was constructed and achieved 264 separation stages over several days, which is well above the goal of 50 stages outlined in the CRADA. The resulting height equivalent to a theoretical plate (HETP) was 0.76 cm. ITP tests were run ~ 24 hours and achieved a single-stage separation factor of 1.559.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2026

Novel Method for Domestic Stable Isotope Production (CRADA #667) Final Report

This report presents the progress achieved on our chlorine isotope separation efforts in the CRADA #667 agreement. We used a microchannel distillation (MCD) packing structure to enrich HCl isotopes (H35Cl, H37Cl) and an isotachophoresis (ITP) separation to enrich ionic chloride species (35Cl- and 37Cl-). A 2 m tall MCD column was constructed and achieved 264 separation stages over several days, which is well above the goal of 50 stages outlined in the CRADA. The resulting height equivalent to a theoretical plate (HETP) was 0.76 cm. ITP tests were run ~ 24 hours and achieved a single-stage separation factor of 1.559.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2025

Global Gyrokinetic Simulations of Isotope Effects under Ambipolar Electric Fields and Advances Toward Whole-Volume Modeling

We review global gyrokinetic simulation studies on plasma transport in the Large Helical Device using XGC-S. XGC-S is an extended version of X-point Gyrokinetic Code for stellarators and has been progressively verified throughout the code development process. Verification tests of neoclassical transport successfully demonstrate the generation of an ambipolar electric field due to ripple-trapped particles. We perform quasi-linear analyses of the ion temperature gradient mode under the influence of the ambipolar electric field. The results reveal that the ambipolar electric field and the heavy hydrogen component in mixed isotope plasmas can lead to the favorable isotope effect observed in recent deuterium experiments. We also present recent efforts in code development toward whole-volume simulations, including the helical divertor region. A mesh generation scheme based on field-line tracing and the construction of curved surfaces perpendicular to the magnetic field would be promising for global field calculations in the whole-volume simulations.

Basic Plasma Phenomena and Gas Discharges↗
DOE OSTI2024

Simple separation of technetium from molybdenum for tracer isotope production

A procedure for the separation of technetium isotopes from bulk molybdenum was developed in nitric acid media. After irradiation of nat Mo foils, and dissolution in H 2 O 2 , the solution is acidified to 2 M HNO 3 , and anion exchange resin is used to separate technetium from molybdenum. The procedure is simple, requiring only basic laboratory equipment and, with a two-column separation, the technetium yield is high (~ 85%) with extremely high purity (< 0.1 ppm nat Mo). In conclusion, this is ideally suited for laboratory production of technetium tracer isotopes, particularly 95m Tc.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗