Search NASA⌕ Search

SEARCH · Search NASA

Results for “Monolithic Integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Thermally Stable Ruthenium Contact for Robust p‑Type Tellurium Transistors

Tellurium (Te) is attractive for p-channel transistors due to its high hole mobility. Despite having a low thermal budget suitable for back-end-of-line (BEOL) monolithic integration, the practical realization of Te transistors is hindered by its thermal stability. In this work, we investigate thermal stability for Te thin films grown via scalable thermal evaporation. Our findings identify ruthenium as a more thermally stable contact for p-type Te transistors, capable of withstanding temperatures up to 250 °C. Ruthenium exhibits significantly lower diffusivity in Te compared to other contact metals commonly used such as nickel and palladium. Using the transfer-length method, we measured a contact resistance of 1.25 kΩ·μm at the ruthenium-tellurium interface. Additionally, the incorporation of high-κ ZrO2 encapsulation not only suppresses the sublimation of the Te channel at elevated temperatures but also serves as the gate dielectric in top-gate devices operating at 1 V, achieving an on/off current ratio of 105.

Rahman, I K M Reaz↗
DOE OSTI2023

All-Perovskite Tandem Photoelectrodes for Unassisted Solar Hydrogen Production

Unassisted solar water splitting by multi-junction tandem photoelectrodes is a sustainable approach to generating green hydrogen fuels. Here, we report on the fabrication of monolithically integrated all-perovskite tandem photocathodes for efficient unassisted solar water splitting. All-perovskite tandem photocathodes wired to an iridium oxide anode deliver a high photovoltage of more than 2 V with an operating photocurrent density of 12.5 mA cm -2 at zero applied bias under simulated AM1.5G one sun illumination, yielding a solar-to-hydrogen (STH) conversion efficiency of 15%. The tandem photoelectrode demonstrates continuous operation for more than 120 hours in water under simulated one-sun illumination with less than 5% efficiency loss. A technoeconomic analysis shows the projected production cost of all-perovskite tandem photoelectrodes is $\$30$ m -2 , promising a levelized cost of hydrogen of less than $\$1$/kg if sufficient device longevity is realized. Finally, this work provides a path toward achieving cost-effective unassisted solar hydrogen fuel production.

08 HYDROGEN↗
DOE OSTI2021

High-performance photonic transformers for DC voltage conversion

Abstract Direct current (DC) converters play an essential role in electronic circuits. Conventional high-efficiency DC voltage converters, especially step-up type, rely on switching operation, where energy is periodically stored within and released from inductors and/or capacitors connected in a variety of circuit topologies. Since these energy storage components, especially inductors, are fundamentally difficult to scale down, miniaturization of switching converters proves challenging. Furthermore, the resulting switching currents produce significant electromagnetic noise. To overcome the limitations of switching converters, photonic transformers, where voltage conversion is achieved through light emission and detection processes, have been demonstrated. However, the demonstrated efficiency is significantly below that of the switching converter. Here we perform a detailed balance analysis and show that with a monolithically integrated design that enables efficient photon transport, the photonic transformer can operate with a near-unity conversion efficiency and high voltage conversion ratio. We validate the theory with a transformer constructed with off-the-shelf discrete components. Our experiment showcases near noiseless operation and a voltage conversion ratio that is significantly higher than obtained in previous photonic transformers. Our findings point to the possibility of a high-performance optical solution to miniaturizing DC power converters and improving the electromagnetic compatibility and quality of electrical power.

42 ENGINEERING↗
DOE OSTI2024

Group IV topological quantum alloy and the role of short-range order: the case of Ge-rich Ge 1– x Pb x

Despite the explosion of interest in topological materials over the last decades, their applications remain limited due to challenges in growth and incorporation with today’s microelectronics. As a potential bridge to close this gap, we investigate the group-IV alloy Ge 1–x Pb x , in the Ge-rich condition using density functional theory and show that relatively low concentrations of Pb (~9.4%) can lead to a topological phase transition. Furthermore, the calculation of the Z 2 invariant for both the random alloy and the alloy with short-range order (SRO) indicate that the topological phase of the material can be directly modified by the degree of SRO. These findings are understood in terms of local structural relaxation, which decreases the bandgap in the random alloy. However, in the SRO case, the mutual avoidance of Pb leads to minimal structural relaxation, alleviating strain. Our findings not only highlight the emerging importance of SRO in alloy properties but also indicate the possibility of constructing topological interfaces between materials of identical composition (and nominally identical structure). Moreover, they uncover a viable avenue toward the monolithic integration of quantum materials with today’s semiconductor industry.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-fidelity trapped-ion qubit operations with scalable photonic modulators

Abstract Experiments with trapped ions and neutral atoms typically employ optical modulators in order to control the phase, frequency, and amplitude of light directed to individual atoms. These elements are expensive, bulky, consume substantial power, and often rely on free-space I/O channels, all of which pose scaling challenges. To support many-ion systems like trapped-ion quantum computers or miniaturized deployable devices like clocks and sensors, these elements must ultimately be microfabricated, ideally monolithically with the trap to avoid losses associated with optical coupling between physically separate components. In this work we design, fabricate, and test an optical modulator capable of monolithic integration with a surface-electrode ion trap. These devices consist of piezo-optomechanical photonic integrated circuits configured as multi-stage Mach-Zehnder modulators that are used to control the intensity of light delivered to a single trapped ion on a separate chip. We use quantum tomography employing hundreds of multi-gate sequences to enhance the sensitivity of the fidelity to the types and magnitudes of gate errors relevant to quantum computing and better characterize the performance of the modulators, ultimately measuring single qubit gate fidelities that exceed 99.7%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Graphene-assisted spontaneous relaxation towards dislocation-free heteroepitaxy

While conventional homoepitaxy forms high-quality epitaxial layers, the limited set of material systems for commercially available wafers restricts the range of materials that can be grown homoepitaxially. At the same time, conventional heteroepitaxy of lattice-mismatched systems produces dislocations above a critical strain energy to release the accumulated strain energy as the film thickness increases. The formation of dislocations, which severely degrade electronic/photonic device performances, is fundamentally unavoidable in highly lattice-mismatched epitaxy. Herein, we introduce a unique mechanism of relaxing misfit strain in heteroepitaxial films that can enable effective lattice engineering. We have observed that heteroepitaxy on graphene-coated substrates allows for spontaneous relaxation of misfit strain owing to the slippery graphene surface while achieving single-crystalline films by reading the atomic potential from the substrate. This spontaneous relaxation technique could transform the monolithic integration of largely lattice-mismatched systems by covering a wide range of the misfit spectrum to enhance and broaden the functionality of semiconductor devices for advanced electronics and photonics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Vertical organic electrochemical transistors for complementary circuits

Abstract Organic electrochemical transistors (OECTs) and OECT-based circuitry offer great potential in bioelectronics, wearable electronics and artificial neuromorphic electronics because of their exceptionally low driving voltages (<1 V), low power consumption (<1 µW), high transconductances (>10 mS) and biocompatibility 1–5 . However, the successful realization of critical complementary logic OECTs is currently limited by temporal and/or operational instability, slow redox processes and/or switching, incompatibility with high-density monolithic integration and inferior n-type OECT performance 6–8 . Here we demonstrate p- and n-type vertical OECTs with balanced and ultra-high performance by blending redox-active semiconducting polymers with a redox-inactive photocurable and/or photopatternable polymer to form an ion-permeable semiconducting channel, implemented in a simple, scalable vertical architecture that has a dense, impermeable top contact. Footprint current densities exceeding 1 kA cm −2 at less than ±0.7 V, transconductances of 0.2–0.4 S, short transient times of less than 1 ms and ultra-stable switching (>50,000 cycles) are achieved in, to our knowledge, the first vertically stacked complementary vertical OECT logic circuits. This architecture opens many possibilities for fundamental studies of organic semiconductor redox chemistry and physics in nanoscopically confined spaces, without macroscopic electrolyte contact, as well as wearable and implantable device applications.

Science & Technology - Other Topics↗
DOE OSTI2023

Enhanced thermoelectric performance via quantum confinement in a metal oxide semiconductor field effect transistor for thermal management

Abstract The performance of thermoelectric devices is gauged by the dimensionless figure of merit $${{{{{\boldsymbol{ZT}}}}}}$$ ZT . Improving $${{{{{\boldsymbol{ZT}}}}}}$$ ZT has proven to be a formidable challenge given the interdependence of its constitutive quantities, namely Seebeck coefficient, electrical conductivity, thermal conductivity, and temperature. Here, we use quantum confinement to decouple Seebeck coefficient and electrical conductivity to demonstrate an order of magnitude quantum-based enhancement to the thermoelectric figure of merit $${{{{{\boldsymbol{ZT}}}}}}$$ ZT in complimentary metal-oxide-semiconductor field-effect transistors. While most quantum-based enhancement is done through physical confinement using two-dimensional materials, our approach uses electrical confinement. Because of this, our device is more robust than the two-dimensional materials currently used. We further articulate that improvement by as much as a factor of 50 could be achieved in a practical setting. Our approach further provides a path for monolithic integration of on-chip coolers and energy scavengers with virtually no deviation from the fabrication flow of standard electronics.

Oxandale, Samuel W. (ORCID:0000000207484066)↗
DOE OSTI2022

High Carrier Lifetimes in Epitaxial Germanium-Tin/Al(In)As Heterostructures with Variable Tin Compositions

Group IV-based germanium-tin (Ge1-ySny) compositional materials have recently shown great promise for infrared detection, light emission and ultra-low power transistors. High carrier lifetimes are desirable for enhancing the detection limit and efficiency of photodetectors, low threshold current density in lasers, and low tunneling barrier height by lowering defects and dislocations at the heterointerface of a source and a channel. Here, carrier lifetimes in epitaxial germanium (Ge) and variable tin (Sn) compositional Ge1-ySny materials were experimentally determined on GaAs substrates using the contactless microwave photoconductive decay (u-PCD) technique at an excitation wavelength of 1500 nm. Sharp (2 x 2) reflection high energy electron diffraction patterns and low surface roughness were observed from the surface of the Ge0.97Sn0.03 epilayer. X-ray rocking curves from Ge0.97Sn0.03 and Ge0.94Sn0.06 layers demonstrated the pseudomorphic and lattice-matched growth on AlAs and In0.12Al0.88As buffers, respectively, further substantiated by reciprocal space maps and abrupt heterointerfaces evident from the presence of Pendellosung oscillations. High effective carrier lifetimes of 150 ns to 450 ns were measured for Ge1-ySny epilayers as a function of Sn composition, surface roughness, growth temperature, and layer thickness. The observed increase in the carrier lifetime with an increasing Ge layer thickness and a reducing surface roughness, by incorporating Sn, were explained. The enhancement of the carrier lifetime with an increasing Sn concentration was achieved by controlling the defects with lattice-matched Ge0.94Sn0.06/In0.12Al0.88As heterointerfaces or the pseudomorphic growth of Ge0.94Sn0.06 on GaAs. Therefore, our monolithic integration of variable Sn alloy compositional Ge1-ySny materials with high carrier lifetimes opens avenues to realize electronic and optoelectronic devices.

carrier lifetimes↗
DOE OSTI2020

A transmission electron microscopy study of dislocation propagation and filtering in highly mismatched GaSb/GaAs heteroepitaxy

Monolithic integration of lattice-mismatched semiconductor materials opens up access to a wide range of bandgaps and new device functionalities. However, it is inevitably accompanied by defect formation. A thorough analysis of how these defects propagate and interact with interfaces is critical to understanding their effects on device parameters. In this study, we present a comprehensive study of dislocation networks in the GaSb/GaAs heteroepitaxial system using transmission electron microscopy (TEM). Specifically, the sample analyzed is a GaSb film grown on GaAs using dislocation–reduction strategies such as interfacial misfit array formation and introduction of a dislocation filtering layer. Using various TEM techniques, it is shown that such an analysis can reveal important information on the dislocation behavior including filtering mechanism, types of dislocation reactions, and other interactions with interfaces. A novel method that enables plan-view imaging of deeply embedded interfaces using TEM and a demonstration of independent imaging of different dislocation types are also presented. While clearly effective in characterizing dislocation behavior in GaSb/GaAs, we believe that the methods outlined in this article can be extended to study other heteroepitaxial material systems.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ultrafast carrier dynamics in multiple quantum well p–i–n photodiodes

Quantum well (QW) structures are widely used in lasers, semiconductor optical amplifiers, and modulators, enabling their monolithic integration on the same substrate. As optoelectronic systems evolve to meet the growing bandwidth demands in the terahertz regime, a deep understanding of ultrafast carrier dynamics in QW structures becomes essential. We introduce a comprehensive model to analyze the ultrafast dynamics of interband photo-excited carriers in QW p–i–n structures and to calculate their frequency response. This model characterizes the entire photocarrier transport process, including carrier escape from QWs and movement across heterojunction interfaces. Additionally, we outline theoretical methods for calculating carrier escape times from both QWs and heterojunction interfaces. Using a GaAs/AlGaAs QW p–i–n structure as a case study, we discuss the effects of carrier escape times from QWs and heterojunction interfaces, as well as carrier transit time through the intrinsic region, on the frequency response of QW p–i–n structures.

Electronic band structure↗
DOE OSTI2023

Diagonal Shadows Could Cause Arcs in Thin-Film Modules With P4 Scribes

Thin-film photovoltaic (PV) modules are often made using monolithic integration (MLI), regardless of absorber technology. MLI modules sometimes use a fourth pattern of scribe lines, P4, to divide modules into parallel substrings of cells. We simulated diagonal shadows in such modules and show that they cause a voltage difference across P4. This voltage can be enough to cause an arc across P4. An arc inside a PV module can cause burned polymers and broken glass. Such packaging failures create a risk of fire or electric shock in any PV module. These hazards go beyond the permanent loss of efficiency that vertical shadows can cause. Here, we propose several solutions to this potential problem.

14 SOLAR ENERGY↗
DOE OSTI2022

Mid-Infrared Nonlinear Frequency Conversion Using Monolithic Barium Titanate on Silicon-on-Insulator

In this work, efficient nonlinear frequency conversion in the mid-infrared (mid-IR) region was demonstrated by a barium titanate (BTO) on a silicon-on-insulator (SOI) substrate. The BTO thin film was epitaxially grown by pulsed-laser deposition (PLD). The tensorial second order optical nonlinearity and the ferroelectric domain property of the BTO were characterized by the polarimetric mid-IR second harmonic generation (SHG) measurements. Azimuthal-dependent polarized SHG was modeled at different combinations of the nonlinear coefficient $d_{ij}$ and the domain fraction factor $ΔD^Y/ΔD^X$. Strong SHG intensity was experimentally observed over a broad spectrum at λ = 3.1 μm - 3.7 μm. A characteristic linear dependence between the SHG signal and the square of the pumping laser intensity was observed. The monolithic integration between the epitaxial BTO and the Si provides a compact platform for efficient on-chip light generation and quantum photonic technologies.

25 ENERGY STORAGE↗
DOE OSTI2020

Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon

Stacking solar cells with decreasing band gaps to form tandems presents the possibility of overcoming the single-junction Shockley-Queisser limit in photovoltaics. The rapid development of solution-processed perovskites has brought perovskite single-junction efficiencies >20%. However, this process has yet to enable monolithic integration with industry-relevant textured crystalline silicon solar cells. We report tandems that combine solution-processed micrometer-thick perovskite top cells with fully textured silicon heterojunction bottom cells. To overcome the charge-collection challenges in micrometer-thick perovskites, we enhanced threefold the depletion width at the bases of silicon pyramids. Moreover, by anchoring a self-limiting passivant (1-butanethiol) on the perovskite surfaces, we enhanced the diffusion length and further suppressed phase segregation. These combined enhancements enabled an independently certified power conversion efficiency of 25.7% for perovskite-silicon tandem solar cells. These devices exhibited negligible performance loss after a 400-hour thermal stability test at 85°C and also after 400 hours under maximum power point tracking at 40°C.

14 SOLAR ENERGY↗
DOE OSTI2020

Cryogenic C-band wavelength division multiplexing system using an AIM Photonics Foundry process design kit

Cryogenic environments make superconducting computing possible by reducing thermal noise, electrical resistance and heat dissipation. Heat generated by the electronics and thermal conductivity of electrical transmission lines to the outside world constitute two main sources of thermal load in such systems. As a result, higher data rates require additional transmission lines which come at an increasingly higher cooling power cost. Hybrid or monolithic integration of silicon photonics with the electronics can be the key to higher data rates and lower power costs in these systems. We present a 4-channel wavelength division multiplexing photonic integrated circuit (PIC) built from modulators in the AIM Photonics process development kit (PDK) that operate at 25 Gbps at room temperature and 10 Gbps at 40 K. We further demonstrate 2-channel operation for 20 Gbps aggregate data rate at 40 K using two different modulators/wavelengths, with the potential for higher aggregate bit rates by utilizing additional channels.

42 ENGINEERING↗
DOE OSTI2022

Material aspects of giga-Hertz ZnO TFTs for wireless systems

Abstract Having enabled high-value application capabilities through mass production of flat-panel displays, X-ray imagers, and solar panels, Large-Area Electronics (LAE) holds potential to open new frontiers in wireless applications for the Internet of Things and 5G/6G, by enabling unprecedented spatial control and power efficiency through large size and flexible form factor of radiative apertures. However, this requires boosting operation frequencies from the traditional limits in the range of 10–100’s of mega-Hertz to multi giga-Hertz. In this paper, we discuss critical device metrics, to characterize zinc-oxide (ZnO) thin-film transistor (TFT) operation frequency for both active (for signal amplification) and passive components in LAE-based circuits and systems. We then describe the key structural and material approaches towards recently demonstrated LAE-based giga-Hertz wireless systems employing ZnO TFTs. Bringing LAE to the giga-Hertz regime provides a path towards flexible and meter-scale monolithic integrated wireless systems. Graphical abstract

Ma, Yue (ORCID:0000000186724090)↗
DOE OSTI2020

Wide Band-Gap Perovskites for Tandem Photovoltaics

This research was aimed at development of a mechanically-stacked, perovskite Multi-Junction Solar Cell in which (1) at least one Junction is made of metal-halide perovskite and (2) the Junctions are manufactured in parallel and then stacked to create the final module. This technology presented significant advanced manufacturing challenges and opportunities in getting to scale, including materials scale-up and the development of novel roll-to-roll processing and encapsulation methods. Research conducted was also applicable to a monolithically-integrated perovskite Multi-Junction Solar Cell, in which the two or more Junctions are integrated and electrically connected. The project explored the following technical opportunities in conjunction with the Cyclotron Road mentored entrepreneurial research experience: Fabrication of inorganic heterojunction layers on both sides of a perovskite semiconductor, and modification of interfaces; developed transparent electrode layers on both sides of a perovskite semiconductor; and developed a prototype and optimized perovskite Junction Solar Cell.

14 SOLAR ENERGY↗
DOE OSTI2025

AC to AC Solid State Transformer with Bidirectional Switches

This report details the work of the 3-year project for the AC-to-AC Solid State Transformer with Bidirectional Switches project devoted to developing and demonstrated a Type I Solid State Transformer. This report details the design, fabrication, and evaluation of both three-phase and single-phase versions of this solid state transformer operating as a single module, modules in parallel, and modules in cascade. Additionally, this report details the fabrication and evaluation of custom Silicon Carbide bidirectional switches to enable this topology with a comparison between monolithically integrated bidirectional switches as well as co-packaged back-to-back unidirectional devices. Finally, results for custom-fabricated Fe 4 N/ferrite laminated toroidal cores for high frequency transformers are present.

42 ENGINEERING↗