Search NASA⌕ Search

SEARCH · Search NASA

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

W-Band Free Space Permittivity Measurement Setup for Candidate Radome Materials

This paper presents a measurement system used for w-band complex permittivity measurements performed in NASA Langley Research Center's Electromagnetics Research Branch. The system was used to characterize candidate radome materials for the passive millimeter wave (PMMW) camera experiment. The PMMW camera is a new technology sensor, with goals of all-weather landings of civilian and military aircraft. The sensor is being developed under a NASA Technology Reinvestment program with TRW, McDonnell- Douglas, Honeywell, and Composite Optics, Inc. as participants. The experiment is scheduled to be flight tested on the Air Force's 'Speckled Trout' aircraft in late 1997. The camera operates at W-band, in a radiometric capacity and generates an image of the viewable field. Because the camera is a radiometer, the system is very sensitive to losses. Minimal transmission loss through the radome at the operating frequency, 89 GHz, was critical to the success of the experiment. This paper details the design, set-up, calibration and operation of a free space measurement system developed and used to characterize the candidate radome materials for this program.

Fralick, Dion T.↗

Structural, Bulk Permittivity, and Magnetic Properties of Lead-Free Electronic Material: Ba{sub 1}Bi{sub 1}Cu{sub 1}Fe{sub 1}Ni{sub 1}Ti{sub 3}O{sub 12}

In this report, Ba{sub 1}Bi{sub 1}Cu{sub 1}Fe{sub 1}Ni{sub 1}Ti{sub 3}O{sub 12} (BBCFNTO termed further) ceramics were synthesized using a conventional ceramic processing route. The formation of multiple phases has been confirmed from by the XRD pattern at room temperature. The surface micrograph indicates the uniform distribution of grains with distinct grain boundary. The co-relation between the impedance and dielectric parameters was realized by using a phase sensitive meter over a good temperature and frequency range. The temperature- and frequency-dependent dielectric properties are linked to the conduction mechanism. The dielectric constant (K) and loss (tanδ) are increased sharply at high-temperature region, which is expected to be the onset of dipolar relaxation phenomena. The contribution of grain boundary (GBs) and grain (Gs) effects can be identified using the complex impedance spectroscopy. This synthesized material is investigated to model multifunctional devices.

36 MATERIALS SCIENCE↗

Optical Properties of Planar and Annular Ternary Superconducting Photonic Crystals in Near-Zero-Permittivity Operation Range

Optical properties of ternary superconducting planar/annular photonic crystals composed of a high-temperature superconductor and two dielectrics were theoretically investigated based on transfer matrix methods in Cartesian and cylindrical coordinates. Electrodynamics of superconductor were modelled using two-fluid model. It is of interest to observe that, for a planar structure, there exists an additional high reflectance band termed as superpolariton gap near the superconducting threshold wavelength for the TM wave at oblique incidences and some reflection dips also were found in the TM reflectance. However, the superpolariton gap and reflection dips were seen for an annular geometry at higher order azimuthal number. For an annular structure, the size of superpolariton gap can be controlled by simply adjusting the starting radius. Moreover, the superpolariton gap in both structures strongly depends on the operating temperature, different combinations of dielectric refractive indices, and thicknesses of dielectric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of giant permittivity and high-temperature dielectric anomaly behavior in Na{sub 0.5}Y{sub 0.5}Cu{sub 3}Ti{sub 4}O{sub 12} ceramics

Na{sub 0.5}Y{sub 0.5}Cu{sub 3}Ti{sub 4}O{sub 12} ceramics prepared by the conventional solid-state reaction method under various sintering conditions were found to exhibit a giant dielectric constant over 10 000 around room temperature. Two electrical responses were observed in the combined modulus and impedance plots, indicating the presence of Maxwell-Wagner relaxation. The contributions of semiconducting grains and insulating grain boundaries (corresponding to high-frequency and low-frequency electrical response, respectively) played important roles in the dielectric properties of Na{sub 0.5}Y{sub 0.5}Cu{sub 3}Ti{sub 4}O{sub 12} ceramics. The correlations between grain boundaries resistance and low frequency dielectric loss, grains resistance and the position of dielectric loss peak were addressed. Mixed-valent structures of Cu{sup 2+}/Cu{sup 3+} and Ti{sup 3+}/Ti{sup 4+} had been determined using X-ray photoelectron spectroscopy. Electron hopping between Cu{sup 2+} and Cu{sup 3+} and electron transport in Ti{sup 3+}-O-Ti{sup 4+} paths were proposed as the origin of the semiconducting nature of Na{sub 0.5}Y{sub 0.5}Cu{sub 3}Ti{sub 4}O{sub 12} ceramics. In particular, high-temperature dielectric anomaly behavior was investigated in detail. A dielectric peak exhibiting relaxor-like behavior was observed around 200 Degree-Sign C, which was linked with the formation of oxygen vacancies. Based on the electric modulus results, this behavior was explored in the light of the defect formation and explained in terms of a competition process depending on the combinational contribution to polarization between n- and p-type carriers rather than a relaxation process.

36 MATERIALS SCIENCE↗

Ceramic-polymer nanocomposites with increased dielectric permittivity and low dielectric loss

The use of lead free materials in device fabrication is very essential from environmental point of view. We have synthesized the lead free ferroelectric polymer nanocomposite films with increased dielectric properties. Lead free bismuth titanate has been used as active ceramic nanofillers having crystallite size 24nm and PVDF as the polymer matrix. Ferroelectric β-phase of the polymer composite films was confirmed by X-ray diffraction pattern. Mapping data confirms the homogeneous dispersion of ceramic particles into the polymer matrix. Frequency dependent dielectric constant increases up to 43.4 at 100Hz, whereas dielectric loss decreases with 7 wt% bismuth titanate loading. This high dielectric constant lead free ferroelectric polymer films can be used for energy density applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electric field and temperature dependence of dielectric permittivity in strontium titanate investigated by a photoemission study on Pt/SrTiO{sub 3}:Nb junctions

Schottky junctions made from platinum and niobium-doped strontium titanate (SrTiO{sub 3}:Nb) were investigated by hard X-ray photoemission (HXPES) and through a band bending behavior simulation using a phenomenological model, which assumes a decrease in dielectric constant due to an electric field. Thus, we confirmed that the observed HXPES spectra at relatively high temperatures, e.g., >250 K, were well simulated using this phenomenological model. In contrast, it was inferred that the model was not appropriate for junction behavior at lower temperatures, e.g., <150 K. Therefore, a reconstruction of the phenomenological model is necessary to adequately explain the dielectric properties of SrTiO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Interplay between Salt Association and the Dielectric Properties of Low Permittivity Electrolytes: The Case of LiPF 6 and LiAsF 6 in Dimethyl Carbonate

Here, we present evidence that the dielectric constant of an electrolyte solution can be effectively used to infer the association regime of the salt species from computational methods. As case studies, we consider the low dielectric constant solvent dimethyl carbonate with LiAsF 6 and LiPF 6 salts at low concentrations. Using both quantum “ab initio” methods as well classical molecular dynamics simulations, we elucidate the salt’s contribution to the dielectric constant as well as the dipolar relaxation times, which act as quantitative signatures. By comparing to previously published measurements, we provide strong evidence for the presence of contact-ion pairs at these low concentrations. Interestingly, these ion pairs increase the dielectric constant of the solution, allowing for significantly improved ionic conductivity as a function of salt concentrations. We also discuss the role of multimeric equilibrium species as contributors to the functional properties of designer electrolytes, such as dielectric properties of the solution and ionic conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Achieving High Permittivity Paraelectric Behavior in Mesogen-Free Sulfonylated Chiral Polyethers with Smectic C Liquid Crystalline Self-Assembly

Ferroelectric liquid crystalline polymers (LCPs) with a high spontaneous polarization (P s ) are of great interest for the fabrication of advanced electronic devices. However, conventional ferroelectric LCPs typically exhibit low spontaneous polarization, only around 1 mC/m 2 . To increase the orientational polarization for ferroelectric LCPs, in this work, we designed mesogen-free comb-shaped LCPs based on isotactic polyepichlorohydrin, which contained highly dipolar sulfonyl groups (dipole moment of 4.5 Debye) in the side chains. The goal was to increase dipole density and induce ferroelectric switching. In this new series of mesogen-free LCPs, the sulfonyl groups were first moved away from the main chain to mitigate strong dipole–dipole interactions. Second, methyl-branched alkyl side chains were implemented to decrease the crystallizability and induce the Smectic C (SmC) self-assembly. Intriguingly, these SmC samples, for the first time, exhibited typical paraelectric behavior (i.e., slim S-shaped single hysteresis loops) with a high dielectric constant in the range of 20–30. Finally, learning from the knowledge obtained from this study, we will be able to design new mesogen-free LCPs with tailor-made dipole–dipole interactions and realize ferroelectricity.

36 MATERIALS SCIENCE↗

Characterizing Hydrated Polymers via Dielectric Relaxation Spectroscopy: Connecting Relative Permittivity, State of Water, and Salt Transport Properties of Sulfonated Polysulfones

Sulfonated polysulfone is a promising membrane material for separation and energy generation processes that rely on membranes to control the rates of small-molecule (e.g., water and ions) transport. The interactions among water molecules, ions, and the sulfonate groups in these polymers play a key role in controlling these rates of transport, but much remains unknown about these fundamental interactions in sulfonated polymers. In this study, we used dielectric relaxation spectroscopy to characterize water molecule dynamics in sulfonated polysulfone and Nafion. We found that the charged sulfonate groups contribute to a restriction of water molecule dynamics (i.e., a reduction in the characteristic time scale of dipolar motions) in a manner that is governed by the concentration and nature (i.e., conjugate base strength) of the sulfonate group. Additionally, we develop strategies to use these data to aid in modeling ion transport in sulfonated polysulfone. These results may be useful to guide engineering strategies for polymeric membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An assessment of comparaqtive methods for approaching electrode polarization in dielectric permittivity measurements

We examine the validity of three common methods for analysis and correction of the electrode polarization (EP) effect in dielectric spectroscopy measurements of conductive liquid samples. The methods considered are (i) algorithmic treatment by modeling the EP behavior at constant phase angle, (ii) varying the size of the electrode gap, and (iii) polypyrrole (PPyPss) layered electrodes. The latter is a relatively recent innovation suggested to be an efficient solution. We demonstrate that PPyPss coated electrodes do not diminish the effect of EP, and even add relaxation processes of its own. Our conclusion is that these polymer coated electrodes are not suitable for the correction of electrode polarization.

Ben Ishai, Paul↗