SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A presentation recommending that TOPCon modules and/or cells should have surface passive degradation tests performed, and should be treated with surface passivation recovery.
This project’s goal was to demonstrate a hydrogen plasma (H-plasma)-rotary kiln process for reducing iron ore to iron as part of the steel manufacturing process. The H-plasma provides a greater thermodynamic driving force for reducing iron ores than thermal processes such as the DRI process, enabling lower reaction temperatures. We estimated that our process technology can reduce energy consumption by 45% compared to the blast furnace process and ~15% compared to the DRI process. Steel manufacturing produces about 1.8 tons of CO2/ton of steel with iron ore reduction accounting for about one-third of the CO2 produced in the overall manufacturing process. We estimated our process has the potential to reduce GHG emissions from ironmaking by 35% with today’s grid and by up to 88% with a future low-carbon grid while being cost competitive with the current blast furnace route. We demonstrated reduction of hematite and magnetite rich materials at temperatures from 600 to 800°C. We achieved 90-95% metallization on 100 gr samples in batch reduction experiments in the H-plasma rotary kiln furnace at 600-650°C. Attempts to perform tests in a continuous operation mode identified problems with the ore feed mechanism. We identified solutions but there was not time nor budget to correct these for this project
This project’s goal was to demonstrate a hydrogen plasma (H-plasma)-rotary kiln process for reducing iron ore to iron as part of the steel manufacturing process. The H-plasma provides a greater thermodynamic driving force for reducing iron ores than thermal processes such as the DRI process, enabling lower reaction temperatures. We estimated that our process technology can reduce energy consumption by 45% compared to the blast furnace process and ~15% compared to the DRI process. Steel manufacturing produces about 1.8 tons of CO2/ton of steel with iron ore reduction accounting for about one-third of the CO2 produced in the overall manufacturing process. We estimated our process has the potential to reduce GHG emissions from ironmaking by 35% with today’s grid and by up to 88% with a future low-carbon grid while being cost competitive with the current blast furnace route. We demonstrated reduction of hematite and magnetite rich materials at temperatures from 600 to 800°C. We achieved 90-95% metallization on 100 gr samples in batch reduction experiments in the H-plasma rotary kiln furnace at 600-650°C. Attempts to perform tests in a continuous operation mode identified problems with the ore feed mechanism. We identified solutions but there was not time nor budget to correct these for this project
This technical basis update focuses on the design life of the SAVY-4000® (hereafter “SAVY”) series of nuclear material storage container (e.g., used to store, transport, and handle special nuclear material outside of a glovebox), previously approved under DOE Manual 441.1-1, Nuclear Material Packaging Manual. The SAVY is approved for storing all authorized contents for a period of 15 years. The lifetime extension technical basis is established on the compiled technical data from the on-going SAVY and Hagan surveillance programs, destructive analysis results, accelerated aging studies, and performance testing, in line with the regulatory rigor of DOE M441.1-1.
GTI Energy advanced the development of Cool GTL SM through a multi-phase project that studied and confirmed the promising value of this technology. It optimized the process by creating an integrated pilot plant capable of producing 50 gallons of total liquid hydrocarbon fuel. It also performed testing campaigns and developed a conceptual commercial design to support technoeconomic and life-cycle analyses, resulting in data that demonstrated a greenhouse gas emissions benefit.
Within the NIF (National Ignition Facility) sustainment project, LLNL is replacing all 1,728 blast shields with new ones. Before the new blast shield glass can be installed on NIF, it must pass through the AMOL (Amplifier Main Optics Loop). The AMOL process involves cleaning and coating the glass, assembling it into a Line Replaceable Unit (LRU), and performing testing and inspection. This work will be conducted in the OPFX cleanroom facility (Building 391, Room 1250) and requires several pieces of custom equipment. One key piece of equipment within the loop is the Handling Frame Assembly Table (see Figure 1.1). Its purpose is to assist operators in installing the blast shield glass into handling frames (1014442709) (see Figure 1.2). The table is also used to store handling frame assembly components. The primary components stored are the L-frames (1015208271), which are kept in a drawer underneath the table (see Figure 1.3). The purpose of this safety note is to ensure that the system does not pose a risk of injury to personnel during a seismic event. The system owner is OMST Engineering & Maintenance.
This final report presents the results of the NGCC pilot testing performed during ION’s engineering‑scale demonstration project funded by the U.S. Department of Energy’s National Energy Technology Laboratory (DOE/NETL): “Engineering-Scale Demonstration of Transformational Solvent on NGCC Flue Gas,” referred to as “Project Enterprise” (DE-FE0031950).
Sandia’s UAS Aviation Operations Unit (UAOU) was established in 2019 to be the single entity at Sandia conducting UAS Ops in support the labs Uncrewed Aircraft Systems (UAS) activities. The UAOU currently consists of >330 FAA Registered UAS with a large variety of primarily Class 1&2 UAS: fixed wing (>90), multi-rotor (>230), hybrids, VTOLs, jets, and balloons. Many of these are threat vehicles presented as targets to Counter-UAS (CUAS) systems as part of performance tests, with the remainder in support of other projects across Sandia often with custom payload needs. The UAOU has ~15 primary pilots and reach back to another ~45 FAA Certified Remote Pilots across Sandia. The team conducts flight and CUAS operations at many test locations, including OCONUS. Sandia was awarded the 2024 DOE Federal Aviation Safety Program Award.
The objective of this project was to improve upon the existing Watchr software that charts performance test metrics from the Trilinos project run on supercomputers at Sandia and elsewhere across the DOE complex. Software was iteratively designed and developed using Python Pandas and Dash data visualization to improve the extensibility and user experience of Watchr. Documentation is being maintained for future developers who want to extend the application.
Natural gas flaring occurs in remote shale regions due to limited pipeline takeaway capacity. The conversion of the associated natural gas into aromatics in modular microwave reactors is a viable alternative to monetize the wasted gas. Microwaves offer rapid, selective heating in compact reactor systems that can enable on-demand chemical production at the well-site. Mo-HZSM-5 catalysts are widely used for aromatic production, but the location and nature of the active sites are still under debate. This study focuses on the use of 6 different Mo precursors to elucidate insights into the Mo properties that are desirable for BTX production. The catalysts were characterized by different methods (XPS, TPR, Raman, etc) to determine differences in Mo catalytic properties that may affect performance and understand these differences through performance testing under microwave at 700C for methane dehydroaromatization. Metal precursors that enable a better distribution of Mo into the pores and over the surface lead to improved benzene yield, whereas those that limited Mo to primarily the surface suffer rapid deactivation and low benzene yields. Additionally, strong Lewis acidity that arises from the sodium containing precursor drastically shifts the product selectivity towards dehydrogenation, which produces more ethylene and carbon. This catalyst had the highest deactivation constant of all catalysts tested.
This dataset provides inputs, evaluation results, and trained weights from a large-sample Long Short-Term Memory (LSTM) model designed to predict daily stream temperatures across unregulated river reaches in the conterminous United States (CONUS). It includes dynamic meteorological and hydrologic forcings, static physiographic attributes, and model outputs from cross-validation experiments spanning 300 basins. It supports reproducible modeling, direct application for new basins, and provides data suitable for integration with reservoir and river simulations under current and future climates. It contains two .zip files described below · RQ-AI_runs.zip: Model outputs from 10-fold cross-validation experiments, including observed and predicted daily stream temperatures, along with test performance metrics for water years 2017–2019. Two versions are included: 1. Model trained and validated using subbasin-area weighted dynamic features. 2. Model trained and validated using whole-basin area weighted dynamic features. · RQ-AI_inputs.zip: Collection of all formatted dynamic and static predictor datasets (meteorological, hydrologic, and physiographic features) used in model training and analysis. Detailed instructions and data structure is held at the following GitLab repository: https://code.ornl.gov/tempwise/training.
The Long Baseline Neutrino Facility (LBNF) will deliver a 2.4 MW muon neutrino beam from Fermilab to the Deep Underground Neutrino Experiment (DUNE), requiring unprecedented precision in beamline alignment to achieve DUNE's neutrino oscillation measurement goals. Vertical misalignments of beamline components as small as 0.5 mm can contribute 6-7\% uncertainty in predicted neutrino flux, necessitating sub-0.1 mm alignment monitoring capabilities. The Horn Location Sensor (HLS) system employs frequency sweep interferometry (FSI) in a distributed hydrostatic leveling network to achieve the required precision under harsh radiation conditions up to 5000 kRad/year. Traditional FSI implementations suffer from laser sweep nonlinearities that degrade resolution and require computationally intensive post-processing corrections using gas reference cells. This work presents a real-time FPGA-based implementation of the HLS data acquisition and processing system using a sweep tracker interferometer for dynamic sweep linearization. The system utilizes a PYNQ-Z2 FPGA with programmable logic implementing parallel 16k-point FFT processing across four channels, synchronized by the sweep tracker signal to eliminate post-processing requirements. Spectral performance testing demonstrates significant improvements in peak sharpness compared to traditional fixed-frequency digitization. The FPGA implementation enables real-time displacement monitoring with processing speeds orders of magnitude faster than software-based approaches, essential for the operational requirements of LBNF's eventual distributed sensor network. This advancement in real-time FSI processing directly supports DUNE's precision neutrino physics program by providing the rapid feedback necessary for maintaining stringent beamline alignment tolerances during high-power beam operations.
The Long Baseline Neutrino Facility (LBNF) will deliver a 2.4 MW muon neutrino beam from Fermilab to the Deep Underground Neutrino Experiment (DUNE), requiring unprecedented precision in beamline alignment to achieve DUNE's neutrino oscillation measurement goals. Vertical misalignments of beamline components as small as 0.5 mm can contribute 6-7\% uncertainty in predicted neutrino flux, necessitating sub-0.1 mm alignment monitoring capabilities. The Horn Location Sensor (HLS) system employs frequency sweep interferometry (FSI) in a distributed hydrostatic leveling network to achieve the required precision under harsh radiation conditions up to 5000 kRad/year. Traditional FSI implementations suffer from laser sweep nonlinearities that degrade resolution and require computationally intensive post-processing corrections using gas reference cells. This work presents a real-time FPGA-based implementation of the HLS data acquisition and processing system using a sweep tracker interferometer for dynamic sweep linearization. The system utilizes a PYNQ-Z2 FPGA with programmable logic implementing parallel 16k-point FFT processing across four channels, synchronized by the sweep tracker signal to eliminate post-processing requirements. Spectral performance testing demonstrates significant improvements in peak sharpness compared to traditional fixed-frequency digitization. The FPGA implementation enables real-time displacement monitoring with processing speeds orders of magnitude faster than software-based approaches, essential for the operational requirements of LBNF's eventual distributed sensor network. This advancement in real-time FSI processing directly supports DUNE's precision neutrino physics program by providing the rapid feedback necessary for maintaining stringent beamline alignment tolerances during high-power beam operations.
The Hot Fuel Examination Facility (HFEF) at the Materials and Fuels Complex (MFC) houses the largest U.S. inert atmosphere hot cell for nuclear material research. Key features include the precision gamma scanning (PGS), Fuel Accident Condition Simulator (FACS), Neutron Radiography Reactor (NRAD), and the focus of this project, the Metallograph Loading Cell (MET Cell). The MET Cell performs tests on spent nuclear fuel, such as microhardness testing, microscopy, and neutron radiography. However, the MET Cell’s existing pressure and lighting control systems are outdated and inefficient, with inadequate documentation for system changes over time. This project aims to design a new automated control system for the MET Cell, ensuring longevity (minimum ten years), ease of troubleshooting/repair, and integration into the building monitoring system. The design process addressed challenges such as space restrictions, varied voltages within enclosures, sourcing new components, and security limitations. Compliance with NFPA 70, UL508A, MFC Physical Security, and INL Engineering standards was essential. The project involves repurposing an existing PLC to manage lighting and pressure control using digital and analog signals, simplifying wiring, and ensuring thorough documentation for future reference.
Kogarkoite (Na 3 FSO 4 ) is a sparingly soluble fluoride–sulfate double salt that has been identified in high level nuclear waste sludge at the Hanford Site and, more recently, in sludge batch compilation samples at the Savannah River Site (SRS). Due to its complex dissolution behavior, which exhibits an inverse dependence on sodium ion activity, the presence of this mineral poses significant challenges to waste retrieval and processing. Incomplete dissolution during sludge washing can lead to the retention of fluoride and sulfate in the high-level waste feed, potentially causing the formation of corrosive, immiscible molten salt layers, known as "glass gall,” in vitrification melters. Current efforts to optimize flowsheet parameters and wash-water volumes are hindered by the absence of a commercially available, certified reference material, which prevents the accurate calibration of analytical methods and the verification of dissolution kinetics. To address this critical gap, this research focuses on the laboratory synthesis of pure Kogarkoite to serve as a standard for comprehensive solubility and washing performance testing. A coupled synthesis and simulant campaign was executed using an evaporative crystallization protocol designed to replicate the dynamic concentration effects observed in tank farm operations. Thirteen simulant matrices were prepared by dissolving systematically varied ratios of sodium fluoride (NaF) and sodium sulfate (Na 2 SO 4 ) in deionized water under three distinct caustic regimes: 0.0 g (control), 4.0 g (~1 M), and 12.0 g (~3 M) sodium hydroxide (NaOH). While thermodynamic equilibrium models suggest that high-caustic environments should favor the stability of the double salt7, results from this evaporative study at 25 0 C revealed a distinct kinetic divergence. Simulants with high hydroxide loading predominantly yielded large, blocky crystals of sodium sulfate decahydrate (Na 2 SO 4 .10H 2 O). Successful synthesis of pure Kogarkoite was achieved exclusively in specific NaOH-free compositional windows, where the precipitate manifested as fine, opaque granular aggregates. Ion chromatography (IC) analysis confirmed phase purity through the simultaneous stoichiometric depletion of both fluoride and sulfate from the supernatant. This successful synthesis establishes a reproducible route to generate bulk Kogarkoite, enabling the subsequent phase of quantitative dissolution testing using inhibited water to optimize sludge-batch assembly.
Geothermal Heat Pumps (GHP) are a proven technology to electrify and decarbonize space heating and cooling by utilizing the thermally consistent underground as a heat sink or source. However, the high drilling costs of conventional borehole heat exchangers (BHEs) associated with GHP systems and subsurface heterogeneity have been two major challenges to their widespread adoption. In this paper, we present results from a field-scale pilot of an Underground Thermal Battery (UTB) as a potential alternative to a conventional BHE. To benchmark the UTB performance, a side-by-side field test was conducted to compare the UTB with a conventional BHE installed at the same site. The UTB was installed in a 7.01-meter-deep borehole having a diameter of 0.9 meter, whereas the conventional BHE (with single U-tube loop) is in a borehole with 36.6-meter depth and 0.15-meter diameter. Both are integrated into a GHP system to meet the thermal energy demands of office space at the Illinois Energy Farm on the University of Illinois Urbana-Champaign campus. The system’s performance is compared in terms of heat transfer rate, outlet temperatures, and contributions to the overall thermal power of the GHP system under varying thermal demands and in different heat pump operation modes: heating only, cooling only, and hybrid (alternative, diurnal heating and cooling). Results to date indicate that the UTB delivers a more consistent response under during a time period of varying thermal demands. Its operational performance is better during short-term with higher thermal demands, while the conventional BHE performs better under continuous, long-term thermal demands.
Two prototypes the welded ISOTEK-SFC-W-3 special form capsules (SFCs) of the same design were evaluated to determine if the requirements of Title 49, Code of Federal Regulations (CFR), Part 173.469, Tests for Special Form Class 7 (Radioactive) Materials, were met. The results of the special form tests are documented in this test report. This report describes the special form testing activities performed on the two welded ISOTEK-SFC-W-3 capsules. The test units were designated as TU-1 and TU-2. TU-1 was subjected to leak testing, percussion testing, and impact testing. TU-1 was leak tested using the leak rate test specified in 49 CFR 173.469(a)(4)(i). The impact test on TU-1 was conducted according to the requirements in 49 CFR 173.469 (b)(1). The percussion test that was carried out on TU-1 was conducted in accordance with 49 CFR 173.469 (b)(2). TU-2 was subjected to a leak rate test as specified in 173.469(a)(4)(i) and a heat test as specified in 49 CFR 173.469(b)(4). Each test unit was leak tested before and after these respective tests. The leak rate tests performed were helium back-pressure tests and bubble tests, as specified in American National Standards Institute (ANSI) N14.5-2014. The measured leak rates were converted to standard condition leak rates as specified in American Society for Testing and Measurement (ASTM) E 493. The determined standardized leak rates obtained from the test and the calculations for all the test units met the requirements for special form certification. The testing was performed under the direction of the Oak Ridge National Laboratory (ORNL) Package Testing Program (PTP).
The overarching goal of this project is to understand the phase stability and mechanical behavior of non-stoichiometric multi-principal element alloy (MPEA) materials. In order to identify suitable alloys, we plan to use a combinatorial thin film screening approach, in collaboration with scientists at Lawrence Berkeley National Laboratory who are performing computational work as well as complementary experimental work. Specific tasks within the scope of this project include the fabrication, using thin film deposition from six sputtering targets, of combinatorial samples with multi-dimensional gradients in composition and microstructure. These samples are studied to screen MPEA systems for promising candidate alloys with specific composition(s), based on characterization of composition, structure and mechanical behavior across the thin film. We want to produce single-phase MPEAs with chemical homogeneity in a given thin film region, simple grain structures, and no intermetallic phases present. Gradient films facilitate first-pass screening for desirable characteristics and inform the next stage of work that involves fabrication of bulk MPEA specimens for (tensile) mechanical testing and characterization. To make the bulk alloys, metal (elemental) pieces are melted to form MPEAs, followed by heat treatment to homogenize the composition and microstructure. A subset of alloys is also cast, using vacuum arc melting, to yield larger samples (diameter ~1 cm and length ~5-10 cm) and these allow us to assess viability of scale-up for the alloys in structural applications. Further processing plans include rolling and heat treatment to recrystallize selected bulk MPEAs and grow grains to different extents, in order to investigate size effects in the mechanical behavior of MPEAs. Microspecimen testing will be performed (primarily in tension) to assess the mechanical behavior over a range of temperatures. The deformation microstructure of mechanically tested alloys will be characterized using transmission electron microscopy (TEM) to provide a scientific basis for understanding the structure-property relationships in MPEA mechanical behavior.