Search NASA⌕ Search

SEARCH · Search NASA

Results for “Resonance structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Functional and dynamics testing of the flexible solar array for the communications technology satellite

The test objectives, test methods, thermal environmental simulations, and test results are described, for a series of combined dynamic, thermal, and vacuum environmental tests on a Deployable Solar Array for the Communications Technology Satellite. Six major resonant structural modes were observed over an excitation range of 0.1-1.0 Hz. Corresponding modal damping factors were found to be between 0.001 and 0.01. Variation of temperature environments between -125 C and 42 C did not significantly affect the characteristics of the fundamental modes, but did influence some of the higher modes. Superharmonic response behavior was observed. The tests also verified functional mechanical performance of the solar array under thermal and vacuum conditions.

Harrison, T. D.↗
NASA NTRS1977

Effects of damping on mode shapes, volume 1

Displacement, velocity, and acceleration admittances were calculated for a realistic NASTRAN structural model of space shuttle for three conditions: liftoff, maximum dynamic pressure and end of solid rocket booster burn. The realistic model of the orbiter, external tank, and solid rocket motors included the representation of structural joint transmissibilities by finite stiffness and damping elements. Methods developed to incorporate structural joints and their damping characteristics into a finite element model of the space shuttle, to determine the point damping parameters required to produce realistic damping in the primary modes, and to calculate the effect of distributed damping on structural resonances through the calculation of admittances.

Gates, R. M.↗
NASA NTRS1976

Frequency domain approach for evaluation of stochastic control of elastic spacecraft

An attempt is made to develop a reduced-order filter for an elastic spacecraft. The frequency-domain approach is resorted to both for arriving at an appropriate ROF and for evaluating the resulting stochastic flight controller. The frequency-domain approach employed is contrasted to the time-domain approach previously utilized by the authors. A linearized deterministic dynamical model of a solar electric propulsion spacecraft is analyzed. Flexibility modes were incorporated profitably into the ROF model, and the stochastic controllers exhibit notching of structural resonances reminiscent of classical notch filters. Accurate estimates of modal parameters (damping, natural frequency) are deemed crucial, and use of worst-case values in the ROF design is recommended.

Larson, V.↗
NASA NTRS1978

A high speed pointing system

A laser ranging system for use with the Space Shuttle, and applied to a precise determination of the distance between points arrayed on different tectonic plates, i.e., along the San Andreas fault, spaced at distances of 25, 50, and 100 km, is discussed with attention to the orbiting pointing system. The mount carrying the system contains a single elliptical mirror which directs ten laser firings per second (15-18 firings to each target), and receives the light reflected from the target. The mirror and all moving structural parts are constructed of Be. The axes are equipped with 19-bit shaft angle encoders and brushless torque motors. Care is taken to avoid structural resonances, and to ensure a minimum of servo settling time. A Kalman filter is used with the microprocessor system to interpolate low data rate commands to the higher data rates required by the pointing system.

Winston, G. C.↗
NASA NTRS1979

The use of coherence functions to determine dynamic excitation sources on launch vehicle payloads

The problem of determining the relative contribution of simultaneous acoustic and mechanical inputs to the response of structures under combined dynamic loads was studied. An analytical technique developed by Bendat for calculating ordinary, partial, and multiple coherence functions, using an iterative nonmatrix approach was applied to data obtained from laboratory tests on a complex structural assembly. Testing was performed in an acoustically 'live' room. Up to three random inputs, having similar spectral content and varying degrees of mutual coherence, and a single output were used. Stationary and nonstationary inputs were used. It was concluded that the technique provided an effective method of identifying sources of dynamic excitation and evaluating their relative contributions to the measured output at structural resonances, for stationary random inputs. An attempt to apply the technique to nonstationary inputs did not yield consistent results.

Barrett, S.↗
NASA NTRS1979

Melting of Io by tidal dissipation

The resonant structure of Io leads to forced eccentricities that are considerably larger than the free values. Although still modest by all standards, these forced eccentricities coupled with the enormous tides induced by Jupiter lead to magnitudes of tidal dissipation that are large enough to completely dominate the thermal history of Io. In the present paper, the forced eccentricities are calculated and then substituted into an expression for the total tidal dissipation. The results point to the possibility that the dissipation of tidal energy in Io may have melted a major fraction of Io's mass.

Peale, S. J.↗
NASA NTRS1981

Experimental study of noise reduction for an unstiffened cylindrical model of an airplane fuselage

Noise reduction measurements were made for a simplified model of an airplane fuselage consisting of an unstiffened aluminum cylinder 0.5 m in diameter by 1.2 m long with a 1.6-mm-thick wall. Noise reduction was first measured with a reverberant field pink-noise load on the cylinder exterior. Next, noise reduction was measured by using a propeller to provide a more realistic noise load on the cylinder. Structural resonance frequencies and acoustic reverberation times for the cylinder interior volume were also measured. Comparison of data from the relatively simple test using reverberant-field noise with data from the more complex propeller-noise tests indicates some similarity in both the overall noise reduction and the spectral distribution. However, all of the test parameters investigated (propeller speed, blade pitch, and tip clearance) had some effect on the noise-reduction spectra. Thus, the amount of noise reduction achieved appears to be somewhat dependent upon the spectral and spatial characteristics of the flight conditions. Information is also presented on cyclinder resonance frequencies, damping, and characteristics of propeller-noise loads.

Willis, C. M.↗
NASA NTRS1982

The origin of the Kirkwood gaps - A mapping for asteroidal motion near the 3/1 commensurability

A mapping of the phase space onto itself with the same low-order resonance structure as the 3/1 commensurability in the planar-elliptic restricted three-body problem is obtained. This mapping is about 1,000 times faster than the usual method of numerically integrating the averaged equations of motion. It exhibits some surprising behavior that might provide a key to the origin of the Kirkwood gaps. It is noted that a test asteroid placed in the gap may evolve for a million years with low eccentricity (less than 0.05) and then suddenly jump to large eccentricity (greater than 0.3), becoming a Mars crosser. The removal of the asteroid by a close encounter with Mars would then be possible. As a first test of this hypothesis, a distribution of 300 test asteroids in the area of the 3/1 commensurability was evolved for two million years. When the Mars crossers are removed, the distribution of initial conditions reveals a gap at the location of the 3/1 Kirkwood gap.

Wisdom, J.↗
NASA NTRS1982

Parallel plate radiofrequency ion thruster

An 8-cm-diam. argon ion thruster is described. It is operated by applying 100 to 160 Mhz rf power across a thin plasma volume in a strongly divergent static magnetic field. No cathode or electron emitter is required to sustain a continuous wave plasma discharge over a broad range of propellant gas flow. Preliminary results indicate that a large fraction of the incident power is being reflected by impedance mismatching in the coupling structure. Resonance effects due to plasma thickness, magnetic field strength, and distribution are presented. Typical discharge losses obtained to date are 500 to 600 W per beam ampere at extracted beam currents up to 60 mA.

Nakanishi, S.↗
NASA NTRS1980

An experimental investigation of noise attenuating techniques for space-shuttle canisters

A model of the space shuttle thermal canister was acoustically tested to determine the amount of noise attenuation which could be derived using a simple, single-wall canister construction having rectangular shape. Acoustic testing was performed on the basic canister and with noise-attenuating design modifications. The basic canister experienced noise amplifications at 56 and 80 Hz, which are attributed to the fundamental canister acoustic mode and local panel structural resonances, respectively. The standing wave response at 56 Hz was effectively suppressed by the incorporation of a cardboard baffle midway between the canister end-caps (an additional overall noise reduction of 4 dB). The canister was next tested with 14%, 22.5% and 31% sound absorptive coverages on the interior walls. The coverage was effective between 400-3000 Hz; the maximum benefit (9 dB) occurring at 1600 Hz. Viscoelastic damping strips bonded to the canister exterior provided an additional 4 to 5 dB attenuation over much of the frequency range and has an overall reduction of about 10 dB as compared to 4.4 dB without damping. A significant reduction of the resonant effect at 80 Hz was noted.

Mirandy, L.↗
NASA NTRS1983

Attitude control and stability of a Space Station

Certain problems arise in connection with the design and construction of a Space Station. These problems are partly related to the impossibility to predict in advance the ultimate form and size which the Space Station will assume. Due to the abatement of volume and strength constraints it will be desirable (for maximum utility of mass) to permit very low structural resonance frequencies, and due to complexity of the configuration there will be an extremely high density of modal frequencies. The basic approaches available to an attitude control system designer for coping with the dynamics of a plant with the considered characteristics are examined. In order to overcome difficulties related to a use of currently widely considered approaches, a technique is proposed whereby the degrees of freedom requiring active control are isolated mechanically from other superfluous vibratory modes.

Peters, W. H.↗
NASA NTRS1983

Si III line ratios in the sun

New atomic data for Si III have been used to predict level populations and emission-line intensity ratios for electron densities and temperatures appropriate to the solar transition region. The electron impact collision rates used here are substantially larger than those previously published owing to delineation of the complex resonance structures in the low-energy collision strengths. This together with small changes in the spontaneous radiative rates produces significant changes in the calculated intensity ratios. Generally good agreement is found with observations obtained using the Naval Research Laboratory slit spectrograph aboard Skylab, electron densities from three Si III ratios and from other methods normally agreeing to 0.2 dex or better for a wide variety of solar features. For a fourth ratio, incorporating lines with a wide wavelength separation, the agreement is less satisfactory, possibly owing to uncertainties in the observational data.

Dufton, P. L.↗
NASA NTRS1986

Microwave Power Combiner With Switching Diodes

In multiple-port microwave power combiner, each of outputs of two or more power amplifiers of same frequency and phase passed to common output port separately or together. Each amplifier connected to combiner through switch consisting of resonant structures, radio-frequency chokes, and diode. Switches not only permit flexiblity in selection of amplifiers but isolate unused amplifiers from network, all while operating at relatively low power loss.

Conroy, B. L.↗
NASA NTRS1982

The asteroid ring

From a statistical analysis of asteroid orbital period data, it is shown that the present distribution of asteroids is strongly correlated with the present orbital period of Jupiter (to 1 part in 5000). By analyzing the distribution of orbital eccentricities and inclinations it is shown that the resonant structure of the belt was formed after the asteroids dispersed from the near-coplanar disk in which they accreted.

Dermott, S. F.↗
NASA NTRS1987

Biot theory and acoustical properties of high porosity fibrous materials and plastic foams

Experimental values of acoustic wave propagation constant and characteristic impedance in fibrous materials, and normal absorption for two plastic foams, were compared to theoretical predictions obtained with Biot's theory. The best agreement was observed for fibrous materials between Biot's theory and Delany and Bazley experiments for a nearly zero mass coupling parameter. For foams, the lambda/4 structure resonance effect on absorption was calculated by using four-pole modelling of the medium. A significant mass coupling parameter is then necessary for obtaining agreement between the behavior of the measured absorption coefficients and the theoretical predictions. It is shown how the formalism used for predicting foams absorption coefficients may be used for studying the acoustic behavior of multi-layered media.

Allard, J.↗
NASA NTRS1987

Fiber optic and laser sensors IV; Proceedings of the Meeting, Cambridge, MA, Sept. 22-24, 1986

The conference presents papers on industrial uses of fiber optic sensors, point and distributed polarimetric optical fiber sensors, fiber optic electric field sensor technology, micromachined resonant structures, single-mode fibers for sensing applications, and measurement techniques for magnetic field gradient detection. Consideration is also given to electric field meter and temperature measurement techniques for the power industry, the calibration of high-temperature fiber-optic microbend pressure transducers, and interferometric sensors for dc measurands. Other topics include the recognition of colors and collision avoidance in robotics using optical fiber sensors, the loss compensation of intensity-modulating fiber-optic sensors, and an embedded optical fiber strain tensor for composite structure applications.

De Paula, Ramon P.↗
NASA NTRS1989

Investigation of SSME alternate high pressure fuel turbopump lift-off seal fluid and structural dynamic interaction

The Space Shuttle main engine (SSME) alternate turbopump development program (ATD) high pressure fuel turbopump (HPFTP) design utilizes an innovative lift-off seal (LOS) design that is located in close proximity to the turbine end bearing. Cooling flow exiting the bearing passes through the lift-off seal during steady state operation. The potential for fluid excitation of lift-off seal structural resonances is investigated. No fluid excitation of LOS resonances is predicted. However, if predicted LOS natural frequencies are significantly lowered by the presence of the coolant, pressure oscillations caused by synchronous whirl of the HPFTP rotor may excite a resonance.

Elrod, David A.↗
NASA NTRS1990

Exhaust environment measurements of a turbofan engine equipped with an afterburner and 2D nozzle

A test to measure the acoustic noise and static pressure environment on a structure exposed to engine exhaust flow was conducted at the NASA Lewis Research Center Propulsion Systems Laboratory by using an F100 derivative engine with a two-dimensional convergent-divergent (2D/CD) non-flight-weight demonstrator nozzle. A highly instrumented, water cooled flat panel was placed behind the 2D/CD nozzle, and tests were conducted at simulated Mach/altitude flight conditions with the engine at military or maximum-afterburner power setting. The panel instrumentation consisted of acoustic pressure microphones, thermocouples, and static-pressure pickups. Measurements indicated that the exhaust environment may excite structural resonances up to 10,000 HZ and that overall sound pressure levels decrease with increasing altitude.

Brase, L. O.↗