Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thick Target”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Electron Bremsstrahlung Hard X-Ray Spectra, Electron Distributions and Energetics in the 2002 July 23 Solar Flare

We present and analyze the first high-resolution hard X-ray spectra from a solar flare observed in both X-ray/gamma-ray continuum and gamma-ray lines. The 2002 July 23 flare was observed by the Ramaty High Energy Solar Spectroscopic Imager (RHESSI). The spatially integrated photon flux spectra are well fitted between 10 and 300 keV by the combination of an isothermal component and a double power law. The flare plasma temperature peaks at 40 MK around the time of peak hard X-ray emission and remains above 20 MK 37 min later. We derive the evolution of the nonthermal mean electron flux distribution by directly fitting the RHESSI X-ray spectra with the thin-target bremsstrahlung from a double power-law electron distribution with a low-energy cutoff. We also derive the evolution of the electron flux distribution on the assumption that the emission is thick-target bremsstrahlung. We find that the injected nonthermal electrons are well described throughout the flare by this double power-law distribution with a low-energy cutoff that is typically between 20 - 40 keV. Using our thick-target results, we compare the energy contained in the nonthermal electrons with the energy content of the thermal flare plasma observed by RHESSI and GOES. We find that the minimum total energy deposited into the flare plasma by nonthermal electrons, 2.6 x 10(exp 31) erg, is on the order of and possibly less than the energy in the thermal plasma. However, these fits do not rule out the possibility that the energy in nonthermal electrons exceeds the energy in the thermal plasma. This work was supported in part by the RHESSI Project and the NASA Sun-Earth Connection program.

Holman, G. D.↗

Electron Bremsstrahlung Hard X-Ray Spectra, Electron Distributions and Energetics in the 2002 July 23 Solar Flare

We present and analyze the first high-resolution hard X-ray spectra from a solar flare observed in both X-ray/gamma-ray continuum and gamma-ray lines. The 2002 July 23 flare was observed by the Ramaty High Energy Solar Spectroscopic Imager (RHESSI). The spatially integrated photon flux spectra are well fitted between 10 and 300 keV by the combination of an isothermal component and a double power law. The flare plasma temperature peaks at 40 MK around the time of peak hard X-ray emission and remains above 20 MK 37 min later. We derive the evolution of the nonthermal mean electron flux distribution by directly fitting the RHESSI X-ray spectra with the thin-target bremsstrahlung from a double power-law electron distribution with a low-energy cutoff. We also derive the evolution of the electron flux distribution on the assumption that the emission is thick-target bremsstrahlung. We find that the injected nonthermal electrons are well described throughout the flare by this double power-law distribution with a low-energy cutoff that is typically between 20-40 keV. Using our thick-target results, we compare the energy contained in the nonthermal electrons with the energy content of the thermal flare plasma observed by RHESSI and GOES. We find that the minimum total energy deposited into the flare plasma by nonthermal electrons, 2.6 x 10(exp 31)erg, is on the order of and possibly less than the energy in the thermal plasma. However, these fits do not rule out the possibility that the energy in nonthermal electrons exceeds the energy in the thermal plasma.

Holman, Gordon D.↗

High-intensity laser-driven proton acceleration enhancement from hydrogen containing ultrathin targets

Laser driven proton acceleration experiments from micron and submicron thick targets using high intensity (2 × 10{sup 21} W/cm{sup 2}), high contrast (10{sup −15}) laser pulses show an enhancement of maximum energy when hydrogen containing targets were used instead of non-hydrogen containing. In our experiments, using thin (<1μm) plastic foil targets resulted in maximum proton energies that were consistently 20%–100% higher than when equivalent thickness inorganic targets, including Si{sub 3}N{sub 4} and Al, were used. Proton energies up to 20 MeV were measured with a flux of 10{sup 7} protons/MeV/sr.

36 MATERIALS SCIENCE↗

Thin-thick hydrogen target for nuclear physics

In spectroscopic studies of unstable nuclei, hydrogen targets are of key importance. The CHyMENE Project aims to provide to the nuclear physics community a thin and pure solid windowless hydrogen or deuterium target. CHyMENE project must respond to this request for the production of solid Hydrogen. The solid hydrogen target is produced in a continuous flow (1 cm/s) by an extrusion technique (developed with the PELIN laboratory) in a vacuum chamber. The shape of the target is determined by the design of the nozzle at the extrusion process. For the purpose, the choice is a rectangular shape with a width of 10 mm and a thickness in the range of 30-50 microns necessary for the physics objectives. The cryostat is equipped with a GM Cryocooler with sufficient power for the solidification of the hydrogen in the lower portion of the extruder. In the higher part of the cryostat, the hydrogen gas is first liquefied and partially solidified. It is then compressed at 100 bars in the cooled extruder before expulsion of the film through the nozzle at the center of the reaction vacuum chamber. After the previous step, the solid hydrogen ribbon falls by gravity into a dedicated chamber where it sublimes and the gas is pumped and evacuated in a exhaust line. This paper deals with the design of the cryostat with its equipment, with the sizing of the thermal bridge (Aluminum and copper), with the results regarding the contact resistance as well as with the vacuum computations of the reaction and recovery hydrogen gas chambers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fermi -LAT Observations of High-energy Behind-the-limb Solar Flares

We report on the Fermi -LAT detection of high-energy emission from the behind-the-limb (BTL) solar flares that occurred on 2013 October 11, and 2014 January 6 and September 1. The Fermi -LAT observations are associated with flares from active regions originating behind both the eastern and western limbs, as determined by STEREO . All three flares are associated with very fast coronal mass ejections (CMEs) and strong solar energetic particle events. We present updated localizations of the >100 MeV photon emission, hard X-ray (HXR) and EUV images, and broadband spectra from 10 keV to 10 GeV, as well as microwave spectra. We also provide a comparison of the BTL flares detected by Fermi -LAT with three on-disk flares and present a study of some of the significant quantities of these flares as an attempt to better understand the acceleration mechanisms at work during these occulted flares. We interpret the HXR emission to be due to electron bremsstrahlung from a coronal thin-target loop top with the accelerated electron spectra steepening at semirelativistic energies. The >100 MeV gamma-rays are best described by a pion-decay model resulting from the interaction of protons (and other ions) in a thick-target photospheric source. The protons are believed to have been accelerated (to energies >10 GeV) in the CME environment and precipitate down to the photosphere from the downstream side of the CME shock and landed on the front side of the Sun, away from the original flare site and the HXR emission.

79 ASTRONOMY AND ASTROPHYSICS↗

On the reconciliation of simultaneous microwave imaging and hard X-ray observations of a solar flare

Microwave imaging data for a small flare with simultaneous hard X-ray spectral observations are compared. The X-ray data suggest that the power-law index delta of the energy distribution of the radiating electrons is 5.3 (thick-target) which differs significantly from the estimate (delta = 1.4) from a homogeneous optically-thin gyrosynchrotron model which fits the radio observations well. In order to reconcile these results, a double power-law energy spectrum is investigated for the energetic electrons in the flare, as assumed by other authors: the power law is steep at low energies and much flatter at the higher energies which produce the bulk of the microwaves. The emission of soft photons by the flat tail strongly contributes to the observed hard X-ray range and would flatten the spectrum there. A thin-target model for the X-ray emission is also inconsistent with radio data. An inhomogenous gyrosychrotron model with a number of free parameters and containing an electron distribution given by the thick-target X-ray model could be made to fit the radio data.

Nitta, N.↗

RHESSI and Trace Observations of the 21 April 2002 X1.5 Flare

Observations of the X1.5 flare on 21 April 2002 are reviewed using the Ramaty High Energy Solar Spectroscopic Imager (RHESSI) and the Transition Region and Coronal Explorer (TRACE). The major findings are as follows: 1. The 3-25 keV X-rays started 54 mins before the EUV (195 A) emission suggesting that the initial energy release heated plasma directly to 220 MK, well above the 1.6 MK needed to produce the Fe XII (195 A) line. 2. Using coaligned 12-25 keV RHESSI and TRACE images, further evidence is found for the existence of hot (15-20 MK) plasma in the 195 A passband. This hot, diffuse emission is attributed to the presence of the Fe XXIV (192 A) line within the TRACE 195 A passband. 3. The 12-25 keV source centroid moves away from the limb with an apparent velocity of approx. 9.9 km/ s, slowing to approx. 1.7 km/ s after 3 hours, its find altitude being approx. 120 Mm after approx. 12 hours. This suggests that the energy release site moves to higher altitudes in agreement with classical flare models. 4. The 50-100 keV emission correlates well with EUV flare ribbons, suggesting thick-target interactions at the footpoints of the magnetic arcade. The 50-100 keV time profile matches the time derivative of the GOES light curve (Neupert effect), which suggests that the same electrons that produced the thick-target hard X-ray emission also heat the plasma seen in soft X-rays. 5. X-ray footpoint emission has an E(sup -3) spectrum down to approx. 10 keV suggesting a lower electron cutoff energy than previously thought. 6. The hard X-ray (25-200 keV) peaks have FWHM durations of approx. 1 min suggesting a more gradual energy release process than expected. 7. The TRACE images reveal a bright symmetric front propagating away from the main flare site at speeds of greater than or = 120 km/ s. This may be associated with fast CME observed several minutes later by LASCO. 8. Dark sinuous lanes are observed in the TRACE images that extend almost radially from the post-flare loop system. This "fan of spines" becomes visible well into the decay phase of the flare and shows evidence for both lateral and downward motions.

Gallagher, Peter T.↗

Inferring the Energy Distribution of Accelerated Electrons in Solar Flares from X-ray Observations

Knowledge of the energy distribution of electrons accelerated in solar flares is important for constraining possible acceleration mechanisms and for understanding the relationships between flare X-ray sources, radio sources, and particles observed in space. Solar flare hard X-rays are primarily emitted from dense, thick-target regions in the lower atmosphere, but the electrons are understood to be accelerated higher in the corona. Various processes can distort the X-ray spectrum or the energy distribution of electrons before they reach the thick-target region. After briefly reviewing the processes that affect the X-ray spectrum and the electron distribution, I will describe recent results from a study of flare spectra from RHESSI to determine the importance of these processes in inferring the energy distribution of accelerated electrons.

Holman, Gordon D.↗

Investigation of relativistic intensity laser generated hot electron dynamics via copper K{sub α} imaging and proton acceleration

Simultaneous experimental measurements of copper K{sub α} imaging and the maximum target normal sheath acceleration proton energies from the rear target surface are compared for various target thicknesses. For the T-cubed laser (≈4 J, 400 fs) at an intensity of ≈2 × 10{sup 19} W cm{sup −2}, the hot electron divergence is determined to be θ{sub HWHM}≈22{sup °} using a K{sub α} imaging diagnostic. The maximum proton energies are measured to follow the expected reduction with increasing target thickness. Numerical modeling produces copper K{sub α} trends for both signal level and electron beam divergence that are in good agreement with the experiment. A geometric model describing the electron beam divergence reproduces the maximum proton energy trends observed from the experiment and the fast electron density and the peak electric field observed in the numerical modeling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Studying {sup 12}B via {sup 8}Li-{alpha} resonant scattering

The inverse kinematics thick target scattering method (TTIK) has been used to study the {sup 8}Li elastic scattering on {sup 4}He in order to investigate {sup 8}Li-{alpha} cluster configurations in excited states of {sup 12}B. A {sup 8}Li beam, provided by the radioactive beam facility EXCYT, at E{sub beam} = 30.6 MeV, passing through helium thick target, continuously decreases its energy inducing elastic scattering starting from the initial energy down to zero. Four {Delta}E-E double stage silicon detector telescopes were used to detect the recoil {alpha}-particles coming from the scattering. Event by event time measurement between beam particles passing through a MCP detector and {alpha}-particles impinging on {Delta}E stage allows elastic from inelastic events discrimination, thus representing an improvement of the TTIK method. In this paper the used experimental technique and some preliminary results will be briefly described.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Simultaneous investigation of parent electrons and bremsstrahlung X rays by rocket-borne detectors

Simultaneous measurements of the energy spectrum of precipitating electrons and the resulting bremsstrahlung X-ray spectrum were carried out during an auroral event on March 3, 1971, at the Churchill Research Range, Manitoba, Canada. The electron data were obtained with detectors on a Black Brant VB sounding rocket (275-km apogee), while the X-ray flux was measured by an instrument package that was boosted to 60 km on an Arcas rocket. The X-ray package was deployed on a parachute at apogee to provide a slow descent through the atmosphere. Thick-target bremsstrahlung theory is used to calculate the X-ray flux produced by the incident electrons, and a Monte Carlo method is used to predict the X-ray spectrum at various altitudes appropriate for comparison with the measured X-ray data. Satisfactory agreement between theory and experiment is obtained, and the value of the constant in the thick target theory has been estimated to be about 0.00002.

Vij, K. K.↗

Implications of HARP Results for the Energy of the Proton Driver for a Neutrino Factory and Muon Collider

Cross-section data from the HARP experiment for pion production by protons from a tantalum target have been convoluted with the acceptance of the front-end channel for the proposed neutrino factory or muon collider and integrated over the full phase space measured by HARP, to determine the beam-energy dependence of the muon yield. This permits a determination of the optimal beam energy for the proton driver for these projects. The cross-section data are corrected for the beam-energy dependent 'amplification' due to the development of hadronic showers in a thick target. The conclusion is that, for constant beam power, the yield is maximum for a beam energy of about 7 GeV, but it is within 10% of this maximum for 4 < T{sub beam} < 11 GeV, and within 20% of the maximum for T{sub beam} as low as 2 GeV. This result is insensitive to which of the two HARP groups results are used, and to which pion generator is used to compute the thick target effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Global energetics of solar flares. III. Nonthermal energies

This study entails the third part of a global flare energetics project, in which Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) data of 191 M and X-class flare events from the first 3.5 years of the Solar Dynamics Observatory mission are analyzed. We fit a thermal and a nonthermal component to RHESSI spectra, yielding the temperature of the differential emission measure (DEM) tail, the nonthermal power-law slope and flux, and the thermal/nonthermal cross-over energy e {sub co}. From these parameters, we calculate the total nonthermal energy E {sub nt} in electrons with two different methods: (1) using the observed cross-over energy e {sub co} as low-energy cutoff, and (2) using the low-energy cutoff e {sub wt} predicted by the warm thick-target bremsstrahlung model of Kontar et al. Based on a mean temperature of T {sub e} = 8.6 MK in active regions, we find low-energy cutoff energies of e{sub wt}=6.2±1.6 keV for the warm-target model, which is significantly lower than the cross-over energies e{sub co}=21±6 keV. Comparing with the statistics of magnetically dissipated energies E {sub mag} and thermal energies E {sub th} from the two previous studies, we find the following mean (logarithmic) energy ratios with the warm-target model: E{sub nt}=0.41 E{sub mag}, E{sub th}=0.08 E{sub mag}, and E{sub th}=0.15 E{sub nt}. The total dissipated magnetic energy exceeds the thermal energy in 95% and the nonthermal energy in 71% of the flare events, which confirms that magnetic reconnection processes are sufficient to explain flare energies. The nonthermal energy exceeds the thermal energy in 85% of the events, which largely confirms the warm thick-target model.

79 ASTRONOMY AND ASTROPHYSICS↗

Global Energetics of Solar Flares: Nonthermal Energies - Part III

This study entails the third part of a global flare energetics project, in which Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) data of 191 M and X-class flare events from the first 3.5 years of the Solar Dynamics Observatory mission are analyzed. We fit a thermal and a nonthermal component to RHESSI spectra, yielding the temperature of the differential emission measure (DEM) tail, the nonthermal power-law slope and flux, and the thermal nonthermal cross-over energy eco. From these parameters, we calculate the total nonthermal energy E(sub nt) in electrons with two different methods: (1) using the observed cross-over energy e(sub co) as low-energy cutoff, and (2) using the low-energy cut off e(sub wt) predicted by the warm thick-target bremsstrahlung model of Kontar et al. Based on a mean temperature of T(sub e) = 8.6 MK in active regions, we find low-energy cutoff energies of e(sub wt) = 6.2 +/-1.6 keV for the warm-target model, which is significantly lower than the cross-over energies e(sub co) = 21 +/- 6 keV. Comparing with the statistics of magnetically dissipated energies E(sub mag) and thermal energies E(sub th) from the two previous studies, we find the following mean (logarithmic) energy ratios with the warm-target model: E(sub nt) = 0.41E(sub mag), E(sub th) = 0.08 E(sub mag), and E(sub th) = 0.15 E(sub nt). The total dissipated magnetic energy exceeds the thermal energy in 95% and the nonthermal energy in 71% of the flare events, which confirms that magnetic reconnection processes are sufficient to explain flare energies. The nonthermal energy exceeds the thermal energy in 85% of the events, which largely confirms the warm thick-target model.

Aschwanden, Markus J.↗

Engineering Microstructure in Dry-Processed Cathodes Via Calendering

Calendering serves as a multifunctional step in dry electrode processing that not only densifies the electrode but also induces polytetrafluoroethylene (PTFE) fibrillation and reorganizes the microstructure. These coupled effects are essential for achieving electrical connectivity and sufficient cohesion, yet they also introduce trade-offs, such as active material particle fracture, pore collapse, and excessive porosity loss, that can hinder ionic transport. This research systematically maps the calendering parameter space for LiNi0.6Mn0.2Co0.2O2 (NMC622) dry cathodes with a target thickness of ∼100 µm and porosity of ∼30% by varying roll gaps, roll temperature, roll speed, and the number of passes. A practical processing window for this formulation and electrode architecture is identified that achieves sufficient PTFE fibrillation and strong interfacial contact while minimizing particle fracture and preserving the porosity required for efficient ionic transport. In particular, gradual-gap calendering with moderate per-pass compression mitigates fracture and pore collapse while still reaching the target thickness with reasonable throughput, and slower roll speeds with modest roll temperatures further reduce mechanical damage. These results provide actionable guidance for scaling NMC622-based thick dry-processed cathodes.

Park, Hyunji↗

The relative timing of microwaves and X-rays from solar flares

The delay of microwaves relative to hard X-rays from solar flares is investigated. For short-time scale delays, it was found that for reasonable thick-target model parameters and for injected electron distributions which are separable in time, energy, pitch angle, and position, the observed delay cannot be explained by magnetic trapping of electrons in the corona. It can be accounted for if higher energy microwave producing electrons are accelerated later than lower energy hard X-ray producing electrons. For larger time-scale delays, it is found that the flux during the rising phase of the flares can be explained well in terms of the thick-target model, but during the decay phase this model predicts too little microwave flux. A number of possibilities for this excess microwave flux are explored including spectral hardening, magnetic trapping, and thermal synchrotron and free-free emission.

Lu, Edward T.↗

Testing Solar Flare Models with BATSE

We propose to use high-sensitivity Burst and Transient Source Experiment (BATSE) hard X-ray observations to test the thick-target and electric field acceleration models of solar flares. We will compare the predictions made by these models with hard X-ray spectral observations obtained with BATSE and simultaneous soft X-ray Ca XIX emission observed with the Yohkoh Bragg Crystal Spectrometer (BCS). The increased sensitivities of the BATSE and BCS (relative to previous detectors) permits a renewed study of the relationship between heating and dynamical motions during the crucial rise phase of flares. With these observations, we will: (1) investigate the ability of the thick-target model to explain the temporal evolution of hard X-ray emission relative to the soft X-ray blueshift during the earliest stages of the impulsive phase; and (2) search for evidence of electric-field acceleration as implied by temporal correlations between hard X-ray spectral breaks and the Ca XIX blueshift. The proposed study will utilize hard X-ray lightcurve and spectral measurements in the 10-100 keV energy range obtained with the BATSE Large Area Detectors (LAD). The DISCLA and CONT data will be the primary data products used in this analysis.

Zarro, Dominic M.↗

Cosmic-ray induced gamma-ray emission from the starburst galaxy NGC 253

Cosmic rays in galaxies interact with the interstellar medium and give us a direct view of nuclear and particle interactions in the cosmos. For example, cosmic-ray proton interactions with interstellar hydrogen produce gamma rays via PcrPism→π{sup 0}→γγ. For a 'normal' star-forming galaxy like the Milky Way, most cosmic rays escape the Galaxy before such collisions, but in starburst galaxies with dense gas and huge star formation rate, most cosmic rays do suffer these interactions [1,2]. We construct a 'thick-target' model for starburst galaxies, in which cosmic rays are accelerated by supernovae, and escape is neglected. This model gives an upper limit to the gamma-ray emission. Only two free parameters are involved in the model: cosmic-ray proton acceleration energy rate from supernova and the proton injection spectral index. The pionic gamma-radiation is calculated from 10 MeV to 10 TeV for the starburst galaxy NGC 253, and compared to Fermi and HESS data. Our model fits NGC 253 well, suggesting that cosmic rays in this starburst are in the thick target limit, and that this galaxy is a gamma-ray calorimeter.

79 ASTRONOMY AND ASTROPHYSICS↗