Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation mining”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Advanced Algorithms and High-Performance Testbed for Large-Scale Site Characterization and Subsurface Target Detecting Using Airborne Ground Penetrating SAR

A team of US Army Corps of Engineers, Omaha District and Engineering and Support Center, Huntsville, let Propulsion Laboratory (JPL), Stanford Research Institute (SRI), and Montgomery Watson is currently in the process of planning and conducting the largest ever survey at the Former Buckley Field (60,000 acres), in Colorado, by using SRI airborne, ground penetrating, Synthetic Aperture Radar (SAR). The purpose of this survey is the detection of surface and subsurface Unexploded Ordnance (UXO) and in a broader sense the site characterization for identification of contaminated as well as clear areas. In preparation for such a large-scale survey, JPL has been developing advanced algorithms and a high-performance restbed for processing of massive amount of expected SAR data from this site. Two key requirements of this project are the accuracy (in terms of UXO detection) and speed of SAR data processing. The first key feature of this testbed is a large degree of automation and a minimum degree of the need for human perception in the processing to achieve an acceptable processing rate of several hundred acres per day. For accurate UXO detection, novel algorithms have been developed and implemented. These algorithms analyze dual polarized (HH and VV) SAR data. They are based on the correlation of HH and VV SAR data and involve a rather large set of parameters for accurate detection of UXO. For each specific site, this set of parameters can be optimized by using ground truth data (i.e., known surface and subsurface UXOs). In this paper, we discuss these algorithms and their successful application for detection of surface and subsurface anti-tank mines by using a data set from Yuma proving Ground, A7, acquired by SRI SAR.

Fijany, Amir↗

ANS MiNES 2023 Poster

The dynamic mechanical properties of four varieties of high purity graphite as well as the depth of penetration (DoP) of a small-scale shaped charge into these grades was experimentally determined. The grades chosen were PCEA, NBG-18, and NBG-25. These grades provide a wide range of physical properties: in density from 1.80 – 1.85 g/cc, in maximum particle size from 10s to 1000s of µm, and in porosity from 18% to 20%. The quasistatic and dynamic compressive strengths of each grade were determined and correlated to their physical properties. The split Hopkinson pressure bar experiments showed both the dynamic strength and dominant shear failure mechanisms. A small scale shaped charge was used to compare the resistance of graphite to hypervelocity jet impacts: the Teledyne RP-4. The RP-4 has a 1.01” outer diameter and 3.44 g of RDX with an RP-80 booster (86 mg PETN + 123 mg RDX). A select number of samples were analyzed using X-Ray Computed Tomography (XCT), allowing for the full characterization of the undisturbed wound channel. A selection of other samples were physically sectioned and wound channels mapped from the sections. In addition to DoP, the wound geometry was characterized in terms of total volume and diameter at different depths. The wound channel characteristics for each grade were correlated to the compressive strengths and physical properties. In several of the test samples, the wound channel diameter was smaller than the diameter of the shaped charge slug just behind where the slug had penetrated the sample. These results indicated that the wound geometry was dependent on the compressive hysteresis behavior of graphite.

36 MATERIALS SCIENCE↗

Microbial sensor variation across biogeochemical conditions in the terrestrial deep subsurface

ABSTRACT Microbes can be found in abundance many kilometers underground. While microbial metabolic capabilities have been examined across different geochemical settings, it remains unclear how changes in subsurface niches affect microbial needs to sense and respond to their environment. To address this question, we examined how microbial extracellular sensor systems vary with environmental conditions across metagenomes at different Deep Mine Microbial Observatory (DeMMO) subsurface sites. Because two-component systems (TCSs) directly sense extracellular conditions and convert this information into intracellular biochemical responses, we expected that this sensor family would vary across isolated oligotrophic subterranean environments that differ in abiotic and biotic conditions. TCSs were found at all six subsurface sites, the service water control, and the surface site, with an average of 0.88 sensor histidine kinases (HKs) per 100 genes across all sites. Abundance was greater in subsurface fracture fluids compared with surface-derived fluids, and candidate phyla radiation (CPR) bacteria presented the lowest HK frequencies. Measures of microbial diversity, such as the Shannon diversity index, revealed that HK abundance is inversely correlated with microbial diversity ( r 2 = 0.81). Among the geochemical parameters measured, HK frequency correlated most strongly with variance in dissolved organic carbon ( r 2 = 0.82). Taken together, these results implicate the abiotic and biotic properties of an ecological niche as drivers of sensor needs, and they suggest that microbes in environments with large fluctuations in organic nutrients (e.g., lacustrine, terrestrial, and coastal ecosystems) may require greater TCS diversity than ecosystems with low nutrients (e.g., open ocean). IMPORTANCE The ability to detect extracellular environmental conditions is a fundamental property of all life forms. Because microbial two-component sensor systems convert information about extracellular conditions into biochemical information that controls their behaviors, we evaluated how two-component sensor systems evolved within the deep Earth across multiple sites where abiotic and biotic properties vary. We show that these sensor systems remain abundant in microbial consortia at all subterranean sampling sites and observe correlations between sensor system abundances and abiotic (dissolved organic carbon variation) and biotic (consortia diversity) properties. These results suggest that multiple environmental properties may drive sensor protein evolution and highlight the need for further studies of metagenomic and geochemical data in parallel to understand the drivers of microbial sensor evolution.

response regulator↗

A Lunar Penetrator to Determine Solar-wind-implanted Resources at Depth in the Lunar Regolith

Several volatiles implanted into the lunar regolith by the solar wind are potentially important lunar resources. He-3 might be mined as a fuel for lunar nuclear fusion reactors. Even if the mining of He-3 turns out not to be feasible, several other elements commonly implanted by the solar wind (H,C, and N) could be important for life support and for propellant or fuel production for lunar bases. A simple penetrator-borne instrument package to measure the abundance of H at depth is proposed. Since solar-wind-implanted volatiles tend to correlate with one another, this can be used to estimate global inventories and to design extraction strategies for all of these species.

Boynton, W.↗

Landscape composition and configuration have scale-dependent effects on agricultural pest suppression

Increasing landscape heterogeneity (composition and configuration) can enhance natural enemy populations and support pest suppression in agricultural landscapes. Using a network-based data mining approach, we examined independent gradients of landscape composition and configuration at six spatial scales that were associated with pest suppression services measured at 32 sites in Michigan and Wisconsin, USA. We compared the relative effects of landscape composition and configuration across scales with those of local crop type (corn or grassland). We found that multiple gradients of configurational heterogeneity were independent of composition and strongly associated with pest suppression, with different configuration metrics being predictive of pest suppression depending on the spatial scales and regions considered. Landscapes that were more configurationally heterogeneous at smaller spatial scales consistently supported higher pest suppression. In Michigan, pest suppression increased in landscapes with high edge contrast between annual crops and surrounding habitats and high edge density of grassland within 250-500 m radii. In Wisconsin, pest suppression increased with large core area of grassland and high field density within a 250 m radius. The main compositional effect we found was a positive relationship between grassland cover and pest suppression occurring at larger spatial scales (1000-1500 m) and occurring in Wisconsin but not in Michigan. Our findings demonstrate that effects of landscape composition and configuration on pest suppression differ across spatial scales and vary regionally. The network-based data mining techniques used here could be useful for disentangling intercorrelated landscape metrics in a variety of other contexts in landscape ecology.

54 ENVIRONMENTAL SCIENCES↗

MINING PLANET SEARCH DATA FOR BINARY STARS: THE ψ{sup 1} DRACONIS SYSTEM

Several planet-search groups have acquired a great deal of data in the form of time-series spectra of several hundred nearby stars with time baselines of over a decade. While binary star detections are generally not the goal of these long-term monitoring efforts, the binary stars hiding in existing planet search data are precisely the type that are too close to the primary star to detect with imaging or interferometry techniques. We use a cross-correlation analysis to detect the spectral lines of a new low-mass companion to ψ{sup 1} Draconis A, which has a known roughly equal-mass companion at ∼680 AU. We measure the mass of ψ{sup 1} Draconis C as M{sub 2} = 0.70 ± 0.07M{sub ⊙}, with an orbital period of ∼20 years. This technique could be used to characterize binary companions to many stars that show large-amplitude modulation or linear trends in radial velocity data.

79 ASTRONOMY AND ASTROPHYSICS↗

Narrow-Channel, Fluidized Beds for Effective Particle Thermal Energy Transport and Storage

Colorado School of Mines (Mines) led this program in collaboration with Sandia National Laboratories (Sandia) to characterize narrow-channel fluidized beds of aluminosilicate particles – supplied by Carbo Ceramics – as a means for releasing high-temperature thermal energy in particle heat exchangers and for capturing concentrated solar energy in indirect particle receivers. Single-channel, heat transfer experiments at Mines and reduced-order 1-D models and 3-D two-fluid, CFD models explored many aspects of counterflow, bubbling fluidized beds (net downward particle flow and upward gas flow) for enhancing particle-wall heat transfer at elevated temperatures. Results at Mines on single-channel test sections consistently showed that mild bubbling fluidization increases particle-wall heat transfer coefficients (h T,w ) regularly by more than 4.0x over h T,w values without fluidization at similar conditions (mean particle diameter d p , bed depth Δz b , and bed particle temperatures T p ). Insights from lab-scale tests and modeling studies provided Nusselt number correlations for h T,w and informed the design and fabrication (by Vacuum Process Engineering) of a nominal 40-kWth, particle-sCO 2 plate heat exchanger (HX) with 12 parallel narrow-channel, fluidized beds bounded by stainless-steel walls with embedded microchannels for high-pressure sCO 2 flows. Tests of the 40-kW th HX at the particle-sCO 2 HX test stand at Sandia's National Solar Thermal Test Facility (NSTTF) were limited, due to HX design, to particle inlet temperatures T p,in ≤ 520°C with maximum sCO 2 outlet temperatures T sCO2,out ≈ 440°C, which are well below design conditions for a primary HX in a sCO 2 power cycle for a Gen-3 concentrating solar power (CSP) plant. Total heat transfer $\dot{Q}_{HX}$ remains relatively constant with increased fluidization for fixed particle and sCO 2 inlet conditions because higher h T,w due to fluidization is offset by increased axial dispersion, which suppresses temperature differences between the particles and sCO 2 in the counterflow configuration. The axial dispersion reduces the effective overall heat transfer coefficient U based on T p,in to values around 200 W m -2 K -1 .

14 SOLAR ENERGY↗

Inferring the Focal Depths of Small Earthquakes in Southern California Using Physics-Based Waveform Features

Determining the depths of small crustal earthquakes is challenging in many regions of the world, because most seismic networks are too sparse to resolve trade-offs between depth and origin time with conventional arrival-time methods. Precise and accurate depth estimation is important, because it can help seismologists discriminate between earthquakes and explosions, which is relevant to monitoring nuclear test ban treaties and producing earthquake catalogs that are uncontaminated by mining blasts. Here, we examine the depth sensitivity of several physics-based waveform features for ~8000 earthquakes in southern California that have well-resolved depths from arrival-time inversion. We focus on small earthquakes (2 < M L < 4) recorded at local distances (<150 km), for which depth estimation is especially challenging. We find that differential magnitudes (M w /M L –M c ) are positively correlated with focal depth, implying that coda wave excitation decreases with focal depth. We analyze a simple proxy for relative frequency content, Φ≡log 10 (M 0 )+3log 10 (f c ), and find that source spectra are preferentially enriched in high frequencies, or “blue-shifted,” as focal depth increases. Here, we also find that two spectral amplitude ratios Rg 0.5–2 Hz/Sg 0.5–8 Hz and Pg/Sg at 3–8 Hz decrease as focal depth increases. Using multilinear regression with these features as predictor variables, we develop models that can explain 11%–59% of the variance in depths within 10 subregions and 25% of the depth variance across southern California as a whole. We suggest that incorporating these features into a machine learning workflow could help resolve focal depths in regions that are poorly instrumented and lack large databases of well-located events. Some of the waveform features we evaluate in this study have previously been used as source discriminants, and our results imply that their effectiveness in discrimination is partially because explosions generally occur at shallower depths than earthquakes.

58 GEOSCIENCES↗

"Solar-Wind-Rich" Howardite: True Regolith vs. CM-Implanted Components

Howardite, eucrite and diogenite meteorites (collectively HED) likely originate from asteroid 4-Vesta [1], one of two asteroids targeted by NASA s Dawn mission. Many howardites (polymict breccias of E and D material) contain "regolithic" features, including impact-melt clasts, fragmental breccia clasts, and carbonaceous chondrite fragments. True regolithic nature can be determined through noble gas analysis, as Solar Wind (SW) is implanted into the upper-most surfaces of solar system bodies. Whilst previous work [2] suggested that high siderophile element contents (e.g. Ni of 300-1200 g/g) were regolith indicators, we found no obvious correlation between SW and these indicators in our initial howardite noble gas analyses [3]. We observed CM-like fragments in a number of our howardites, whose textures suggest late addition to the breccia assemblage [4]. As typical CMs contain mixtures of SW (in matrix) and planetary (in clasts) components [5], we investigate the dominance of such components in SW-rich howardites. This will help deter-mine the extent of implanted SW in HED grains vs. SW and planetary gases from CM fragments, and allow better understanding of regolith processes

Cartwright, Julia A.↗

Mining CRRES IDM Pulse Data and CRRES Environmental Data to Improve Spacecraft Charging/Discharging Models and Guidelines

One can truly predict the charging and pulsing in space over a year's time using only the physics that worked for periods of an hour and less in prior publications. All portions of the task were achieved, including the optional portion of determining a value for conductivity that best .t the data. Fortran statements were developed that are required for the NUMIT runs to work with this kind of data from space. In addition to developing the Fortran for NUMIT, simple correlations between the IDM pulsing history and the space radiation were observed because we now have a better characterization of the space radiation. The study showed that: (1) the new methods for measurement of charge storage and conduction in insulators provide the correct values to use for prediction of charging and pulsing in space; (2) the methods in NUMIT that worked well for time durations less than hours now work well for durations of months; (3) an average spectrum such as AE8 is probably not a good guide for predicting pulsing in space one must take time dependence into account in order to understand insulator pulsing; and (4) the old method for predicting pulse rates in space that was based on the CRRES data could be improved to include dependencies on material parameters.

Brautigam, D. H.↗

The impact of argon addition on hydrogen superpermeation through palladium alloy metal foil pumps during direct internal recycling

Metal foil pumps (MFPs) are a leading technology for the direct internal recycling (DIR) of hydrogen isotopes from the plasma exhaust of fusion devices. MFPs rely on the concept of superpermeation, where plasma-generated atomic hydrogen absorbs into the metal foil, rapidly diffuses, and desorbs downstream. To date, studies of superpermeation have predominantly employed pure hydrogen or in some cases trace levels of impurities. In practice the plasma exhaust may contain significant levels of plasma enhancement gases such as argon, an inert gas with metastable states that can enhance the plasma. In this work, we systematically study the impact of Ar addition on the performance of PdCu and PdAg MFPs at low temperature. Performance was strongly dependent on the DIR fraction. At negligible DIR levels Ar addition did not significantly improve the flux over dilution effects. However, under appreciable DIR operation the flux was enhanced up to 90 % relative to pure H 2 , with the optimal concentration range being 5–10 % Ar exiting the system. Beyond 15 % addition plasma enhancement benefits were offset by dilution. Performance correlated with the atomic H emission, and benefits were more pronounced for PdAg than PdCu. Operation at significant DIR levels dramatically alters the flow dynamics resulting in concentration gradients near the MFP, creating plasma conditions that promote H 2 dissociation.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Field Survey of Rare Earth Element Concentrations in Process Streams Produced by Coal Preparation Plants in the Eastern USA

I this work, a field study was undertaken to experimentally measure the concentrations of rare earth elements (REEs) contained in the process streams generated by a group of 20 coal preparation plants located in the eastern USA. For each site, representative samples of clean coal product, coarse refuse, and fine refuse were collected. Each sample was then partitioned into preselected size and density classes by wet screening/sieving and float-sink testing. The resultant products were dried and subjected to laboratory analyses to determine ash contents and rare earth element concentrations including Yttrium and Scandium. A detailed analysis of the database generated by this exercise showed that coal-based products from these preparation plants contained significant quantities of rare earth elements. In particular, the coarse refuse streams currently discarded by the 20 plants examined were found to contain a sufficient tonnage of REEs to satisfy the current domestic demand for these important elements. The data also showed a strong positive correlation between ash content and REE concentration, which suggested that the primary association of REEs in eastern USA bituminous coal sources is likely within fractions containing inorganic impurities. This association was well described using a simple power equation relating ash content and REE concentration. The ratio of heavy-to-light rare earth elements was discovered to be significantly higher in organically rich fractions of clean coal, suggesting that mineral impurities intimately associated with carbonaceous matter have elevated concentrations of heavy rare earth elements. A similar trend was observed for a grouping of rare earth elements (Y, Nd, Eu, Tb, and Dy) that are likely subject to near-term supply shortages. Finally, the database showed that a linear correlation existed between La for many REEs of interest, although there were several notable exceptions for some high-value REEs (Lu, Pr, and Tb).

01 COAL, LIGNITE, AND PEAT↗

Improved Satellite Retrievals of NO2 and SO2 over the Canadian Oil Sands and Comparisons with Surface Measurements

Satellite remote sensing is increasingly being used to monitor air quality over localized sources such as the Canadian oil sands. Following an initial study, significantly low biases have been identified in current NO2 and SO2 retrieval products from the Ozone Monitoring Instrument (OMI) satellite sensor over this location resulting from a combination of its rapid development and small spatial scale. Air mass factors (AMFs) used to convert line-of-sight "slant" columns to vertical columns were re-calculated for this region based on updated and higher resolution input information including absorber profiles from a regional-scale (15 km × 15 km resolution) air quality model, higher spatial and temporal resolution surface reflectivity, and an improved treatment of snow. The overall impact of these new Environment Canada (EC) AMFs led to substantial increases in the peak NO2 and SO2 average vertical column density (VCD), occurring over an area of intensive surface mining, by factors of 2 and 1.4, respectively, relative to estimates made with previous AMFs. Comparisons are made with long-term averages of NO2 and SO2 (2005-2011) from in situ surface monitors by using the air quality model to map the OMI VCDs to surface concentrations. This new OMI-EC product is able to capture the spatial distribution of the in situ instruments (slopes of 0.65 to 1.0, correlation coefficients of greater than 0.9). The concentration absolute values from surface network observations were in reasonable agreement, with OMI-EC NO2 and SO2 biased low by roughly 30%. Several complications were addressed including correction for the interference effect in the surface NO2 instruments and smoothing and clear-sky biases in the OMI measurements. Overall these results highlight the importance of using input information that accounts for the spatial and temporal variability of the location of interest when performing retrievals.

surface concentration↗

Efficacy of Hair Total Mercury Content as a Biomarker of Methylmercury Exposure to Communities in the Area of Artisanal and Small-Scale Gold Mining in Madre de Dios, Peru

Total mercury content (THg) in hair is an accepted biomarker for chronic dietary methylmercury (MeHg) exposure. In artisanal and small-scale gold mining (ASGM) communities, the validity of this biomarker is questioned because of the potential for contamination from inorganic mercury. As mining communities may have both inorganic and organic mercury exposures, the efficacy of the hair-THg biomarker needs to be evaluated, particularly as nations begin population exposure assessments under their commitments to the Minamata Convention. We sought to validate the efficacy of hair THg for public health monitoring of MeHg exposures for populations living in ASGM communities. We quantified both THg and MeHg contents in hair from a representative subset of participants (N = 287) in a large, population-level mercury exposure assessment in the ASGM region in Madre de Dios (MDD), Peru. We compared population MeHg-THg correlations and %MeHg values with demographic variables including community location, sex, occupation, and nativity. We observed that hair MeHg-THg correlations were high (r > 0.7) for all communities, regardless of location or nativity. Specifically, for individuals within ASGM communities, 81% (121 of 150 total) had hair THg predominantly in the form of MeHg (i.e., >66% of THg) and reflective of dietary exposure to mercury. Furthermore, for individuals with hair THg exceeding the U.S. EPA threshold (1.0 μg/g), 88 out of 106 (83%) had MeHg as the predominant form. As a result, had urine THg solely been used for mercury exposure monitoring, approximately 59% of the ASGM population would have been misclassified as having low mercury exposure. Our results support the use of hair THg for monitoring of MeHg exposure of populations in ASGM settings where alternative biomarkers of MeHg exposure are not feasible.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Identifying biomass yield potential of tetra, hexa, and octoploid prairie cordgrass populations grown on marginal lands

As the demand for renewable energy sources with reduced carbon emissions to the atmosphere increases, bioenergy crops remain an attractive alternative to fossil fuels. Another appeal of bioenergy crops is the potential utilization of marginal lands not suitable for food crops. Prairie cordgrass is a perennial warm season polyploid grass species being considered as a bioenergy crop that also exhibits a high tolerance for salinity and flooding. The ploidy level of prairie cordgrass has previously been suggested to correlate with agronomic traits. However, little is known about the agricultural performance of prairie cordgrass on marginal lands and if a correlation of ploidy level to stress tolerance exists. In this experiment, the productivity of tetraploids, hexaploids, and octoploids was investigated when grown on three different marginal sites including waterlogged, saline, and low-nutrient gravelly soils. Here we found that prairie cordgrass populations annually produced dry biomass on a wet marginal site comparable to normal cropland. However, the productivity was remarkedly decreased at both a salt-affected site and a limestone mine reclamation site. We were unable to conclude that different ploidy levels affected the biomass yield of prairie cordgrass grown under abiotic stress. However, there was a differential response of populations to various types of marginal sites. Finally, these results indicate potential genetic resources for developing breeding targets and identifying mechanisms of abiotic stress tolerance. Moreover, we highlight the need to generate diverse ploidy levels of prairie cordgrass in the same genetic backgrounds for future testing.

09 BIOMASS FUELS↗

COVID-19 Data Curation Effort: An Initial Analysis of the Data

During the COVID-19 pandemic of 2020, major case reporting outlets quickly coalesced around two or three primary vendors. Johns Hopkins University and The New York Times were among the more prominent, and all were of great value to the nation, particularly during the uncertain early stages of the pandemic. They primarily focused on three major attributes: number of new cases, deaths, and recovery. Recognizing that many states were reporting very detailed data sets (e.g., hospital beds) at a county level or finer, the ORNL Pandemic Modeling team embarked on a major data curation effort from March to June 2020 for the purpose of capturing this wealth of detailed data. The challenge of curating this data was daunting. The number of attributes reported by the states grew on almost on a weekly basis. States were routinely shifting their web tool strategies away from easily parsable HTML-based formatting to new Tableau and ArcGIS content. This growth in the sheer number of attributes, combined with the unpredictable shifts in data format, meant an aggressive and agile combination of automated scripting and manual scraping was required to capture new daily streams. Further, the team had to scale up staff and widen its approach for capture and storage. As a result, the team collected more than 11 million data points. Following the close of this data collection effort on June 30 th , 2020, the team embarked on a major effort to appraise what had been collected, including an inventory list, spatial completeness, temporal completeness, scale and geographic characteristics, and a determination. A report on this matter was submitted on September 15 th , 2020, titled “DOE COVID-19 Data Curation Effort: Overview of Data Collection Coverage”. Over 2000 unique attributes had been netted over a wide range of spatial scales, including state, county, zip codes, health regions, and census blocks. Over 11 million individual data points were collected across these attributes, and spatial coverage (in total) included all 50 states and multiple territories. What became apparent in the process is that in the absence of any data standards, many states reported a wide variety of unique attributes that were not always compatible with attributes reported in other states. As time continued, states began adding new attributes and offering finer grain detail in some older attributes. This meant that not all data streams existed for the entire time period; in fact, the number tended to increase dramatically towards the end. Often, states would begin an attribute series and then stop altogether. These highly variable and uncertain conditions illuminated the need for harmonization approaches that would reconcile and conflate changing attribute names and detail over time. For example, grouping racial data reported as either Black or African American, depending on the state, into a single harmonized attribute. These choices would make a within-state analysis possible during the time period and lead to potential between-state analytics later on. This was almost entirely a manual decision process, requiring some subjective decision-making at times, to prevent a fragmented, short-lived collection of time series fragments that would offer few insights into trends, patterns, and correlates. This report imports harmonized data for state and county into the World Spatio-Temporal Analytics and Mapping Project (WSTAMP). WSTAMP is a major space-time analysis and visualization tool developed at ORNL for the National Geospatial-Intelligence Agency specifically for this kind of exploratory analysis. WSTAMP offers a rich analytical and graphical environment consisting of a wide range of analytics. These include time series plots, statistical summaries, data mining techniques, trend and pattern detection, and hypothesis generation.

59 BASIC BIOLOGICAL SCIENCES↗

Pattern Mining and Anomaly Detection based on the Power System Synchrophasor Measurements

Real-time monitoring of power system dynamics using phasor measurement units (PMUs) data improves situational awareness and system reliability and potentially can help prevent blackouts due to early anomaly detection. The study presented in the paper is based on the actual PMU measurements of the U.S. western interconnection system. Given the nonlinear and nonstationary PMUs data, we developed a robust anomaly detection framework. Wavelet-based multi-resolution analysis, combined with moving-window-based outlier detection and anomaly scoring, were deployed to identify potential PMU events. The candidate events were evaluated using spatiotemporal correlation analysis, and then classified for a better understanding of the event types. The results demonstrated successful anomaly detection and classification, compared with the recorded real-world events.

Ren, Huiying↗

Clustering Days with Similar Airport Weather Conditions

On any given day, traffic flow managers must often rely on past experience and intuition when developing traffic flow management initiatives that mitigate imbalances between the aircraft demand and the weather impacted airport capacity. The goal of this study was to build on recent efforts to apply data mining classification and clustering algorithms to vast archives of historical weather and air traffic data to identify patterns and past decisions that can ultimately inform day-of-operations decision-making. More specifically, this study identified similar weather impacted days at select U.S. airports, and analyzed the traffic management initiatives implemented on these representative days. The identification of the similar days was accomplished by applying a decision tree algorithm to the hourly Localized Aviation Model Output Statistics Program observations and the arrival delays for Newark Liberty International Airport. The branches from the trained decision tree were subsequently pruned to identify four weather conditions that resulted in medium to high delays for the arrivals scheduled to Newark in 2012. Using these weather conditions, four, daily airport-level Weather Impacted Traffic Index values were calculated using the Localized Aviation Model Output Statistics Program observations and the 2012 scheduled arrival counts from the FAAs Aviation System Performance Metric system. The four, daily Weather Impacted Traffic Index values for 2012 were subsequently clustered using an Expectation Maximization clustering algorithm, and nine unique types of weather days at Newark were identified. By far the most prominent type of day at Newark was a day associated with relatively good weather conditions, where there was little convective activity, winds were low, ceilings and visibility were high and there was little precipitation. Moderate levels of convective activity characterized the next most prominent type of day. Days with persistently high winds or low ceiling and visibility levels were relatively rare in 2012. Lastly, the frequency at which Ground Delay Programs, Ground Stops and Miles-in-Trail restrictions were implemented on each of the typical types of days at Newark were analyzed. Based on the results, it does appear as if the usage of Miles-in-Trail, Ground Delay Program and Ground Stop restrictions correlates well with the severity of the weather associated with each unique type of weather impacted day at Newark. Furthermore, the results demonstrate that it is feasible to use historical weather and air traffic archives to provide guidance on the types of traffic management restrictions to implement in response to the weather conditions impacting an airport.

traffic flow management↗