Search NASA⌕ Search

SEARCH · Search NASA

Results for “flexible electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Virtual Cable Impedance based Load Sharing in a Microgrid for Parallel Connected Grid Forming Converters

This paper presents a novel approach to power sharing between direct connected grid-forming converters, utilizing virtual cable impedance and droop-based outer loop control. To enhance stability, resistive droop is implemented, while virtual cable impedance with non-zero resistive and inductive components ensures improved power sharing. The inner loop controller employs a Lyapunov energy function to achieve superior dynamic performance. The proposed control architecture is validated through comprehensive modeling and real-time processor-in-the-loop simulations, demonstrating its robustness and efficiency under various operating conditions. The results highlight the potential of this control strategy to improve the reliability and efficiency of renewable energy systems. Additionally, a comparative analysis with traditional methods underscores the advantages of the proposed approach in terms of stability and performance. The proposed control architecture offers a scalable and flexible solution for grid-forming converters, enabling seamless integration of renewable energy sources. Its robustness and adaptability make it an attractive solution for real-world applications. Furthermore, the approach can be extended to other power electronic systems, enhancing overall system performance and efficiency. By providing a reliable and efficient control strategy, this paper contributes to the advancement of renewable energy systems and their adoption in the energy sector. The proposed control strategy has far-reaching implications for the widespread adoption of renewable energy sources, enabling a more sustainable and efficient energy future. The overall system is modeled in MATLAB/Simulink and PLECS software domain.

grid forming converters (GFM)↗
DOE OSTI2025

Wastepaper-derived porous carbon supported cobalt nanocomposites for all solid-state flexible supercapacitor

The conversion of wastepaper into high-value carbon materials has gained significant attention as a sustainable strategy for energy storage applications. Owing to its low cost, abundance, and intrinsic fibrous structure, wastepaper serves as an attractive precursor for carbon-based electrode materials. In this work, a novel electrode comprising cobalt nanoparticles and Co 3 O 4 embedded in wastepaper-derived porous carbon has been developed for use in a flexible all-solid-state asymmetric supercapacitor. The integration of cobalt nanoparticles and Co 3 O 4 introduces redox-active centres, which enhance the electrochemical activity of the carbon framework. Mean while, the interconnected porous and conductive carbon network enables rapid ion diffusion and efficient electron transport, synergistically improving the overall electrochemical performance. It delivers a high specific capacitance of 61.5 Fg -1 , a power density of 5143 W kg -1 , and an energy density of 9 Wh kg -1 at a current density of 2.5 A/ g. Furthermore, the device maintains outstanding cycling stability, retaining 82.86 % of its capacitance after 10,000 charge-discharge cycles. Practical applicability is confirmed through its ability to power

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Irradiation Testing of Additively Manufactured Materials for LWR Applications: Alloy 718 and 316L Stainless Steel

The objective of this NSUF Project is to assess the changes in irradiated additively manufactured (AM) material properties as compared to non-irradiated material. Type 316L stainless steel and Alloy 718 samples were produced using Direct Metal Laser Melting (DMLM) fabrication. Materials produced from this fabrication method have several potential applications within the nuclear industry as reactor internal repair parts, fuel debris resistant filters, or fuel spacers within existing light water reactors (LWRs). AM materials have been shown to achieve equivalent mechanical behavior in simulated reactor environments as compared to wrought materials, but have significantly more flexibility when it comes to unique design features. The increased component design flexibility makes these AM materials an attractive choice for both current LWR applications as well as for small modular reactor (SMR) designs. Prior to use of these materials in reactor fleet operation, the industry as a whole must evaluate the effects of irradiation on their material properties. Standard 0.4 inch thick Compact Tension specimens and SSJ3 type tensile bars were neutron irradiated at the Advanced Test Reactor to ~1 dpa for the purpose of performing a variety of mechanical tests in a range of simulated environments applicable to LWRs. For the ductile austenitic Type 316L stainless steel, the irradiated data will be used to confirm that the AM process produces materials with properties that are equivalent to wrought materials under testing conditions applicable to LWR operation. Transmission electron microscopy analysis was also performed in order to understand microstructural and microchemical changes induced in each material in response to neutron irradiation. If possible, data collected from these AM 316L samples will be used to remove fluence limits from specifications of ASME code cases for this alloy, which will give vendors much more flexibility in building future components.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Enhanced performance of Bi 2 S 3 /TiO 2 heterostructure composite films for solar cell applications

Day to day energy production is shifting towards renewable energy sources as these sources become more economically viable while being less polluting to operate; solar energy has become one of the major sources of renewable energy. However, it currently relies on ultra-pure silicon ingots to produce commercial silicon photovoltaics, which prevents the cost of electricity being produced to compete with non-renewable energy production. A viable low-cost alternative for silicon based cells would be dye-sensitized solar cells (DSSCs), which are easier and cheaper to manufacture as they do not require expensive and delicate raw materials to make. Moreover, they could be made semi-flexible which allows for a greater variety of applications. A DSSC consists of three components, a photo-electrode, an electrolyte and a counter-electrode. When exposed to incident light, the complex photosensitizers in the photoelectrode release electrons which are transported to the external load, leaving the photoelectrode in an oxidized state. The electrons are collected by the counter electrode and used to reduce the electrolyte. This charged electrolyte then reduces the positively charged photoelectrode, allowing the process to begin again. To improve the efficiency of this process, we explore the use of bismuth sulfide (Bi 2 S 3 ) and titanium oxide (TiO 2 ) composite as photoelectrode material and investigate their impact on the efficiency of DSSC.

14 SOLAR ENERGY↗
DOE OSTI2025

Design and Analysis of an Integrated Additively Manufactured Test Article for Plasma-Facing Components

Current plasma-facing components (PFCs) used in helium-cooled divertor modules are complex structures with tungsten tile, steel sleeve components, and cartridges, all assembled in a helium-cooled multiple jet (HEMJ) structure. The goal of this project is to simplify the complex PFC design using additive manufacturing techniques to create a single integrated tungsten test article. Apart from the flexibility this opens up in exploring a wide array of geometries for the article, having a single integrated article significantly reduces the number of joints and parts in the article, thus reducing chances of leaks. A process called electron beam melting has shown to produce very high-density samples and unique geometries, enabling HEMJ or similar designs. To validate and optimize this novel design, the model underwent a series of computational fluid dynamics and finite element analysis simulations to replicate steady-state heat flux in the divertors. The simulations presented in this study consider a steady-state base heat flux of 5 MW/m 2 , with water serving as the coolant. Future research will explore the use of helium as a coolant, simulate edge-localized-mode conditions, and include experimental validation. Since 3D-printed tungsten is anisotropic, the build direction versus build plane of the article are taken into consideration for the test article strength. Because of the high operating temperatures and low ductility of tungsten, thermal creep and brittle fracture are important failure mechanisms to consider. In conclusion, the cap is evaluated with various flow velocities and nozzle diameters, and an optimal design choice is made for which this cap will survive the divertor conditions with a conservative safety margin.

Divertor↗
DOE OSTI2025

Evaluating Variable-Impedance Magnetically-Insulated Transmission Lines as a Risk-Mitigation Measure for Next-Generation Pulsed Power

This project has produced the first detailed characterizations of power flow resulting from applying the “variable-impedance MITL” concept to real-life systems in Sandia’s pulsed power program (Z and next-generation pulsed power (NGPP)). We present simulation results and analyses for constant-impedance versions of both Z and NGPP and survey the operational viability of several variable-impedance re-designs in the parameter space of linear tapers. Circuit modeling (SCREAMER/Bertha) was used to pinpoint promising candidate designs, and EM-PIC (Empire) simulations were used to evaluate these candidates more rigorously. This approach was particularly successful in the Z regime which resulted in the identification of several viable variable-impedance MITL designs for each level. The approach was more challenged in the operating space NGPP occupies, producing data points that speak to a more restrictive design space due to anode plasma turn-on. In the end, we were able to converge on one viable variable-impedance design for the highest inductance line (level “F”) and one for the highest current line (level “A”). Altogether, the body of simulation evidence presented in this report suggest there does exist flexibility in operating space for magnetically-insulated transmission lines (MITLs) having variable geometric impedance to be a potential enabling technology for safely increasing current delivery (and potentially lowering stack voltage) in pulsed-power drivers by manipulating electron losses; however, operating points for a particular design must be carefully screened. Circuit and EM-PIC modeling provided consistent verdicts in safe operating regimes for operational viability, but additional physics such as anode plasma turn-on which is included in Empire but not in SCREAMER/Bertha was found to be a critical factor affecting power flow that lead to different assessments between the codes. It is not always the case that the occurrence of anode plasma caused a design to fail (some designs turned on anode plasma yet still delivered load currents meeting design targets); the details matter such as how early in the pulse anode surfaces break down (and how large a region). However, in every case that it did fail it was found that the feedback from anode plasma was the cause (i.e., turning off the anode plasma model in Empire restored agreement with the circuit model prediction). As circuit simulations represent an efficient and practical means of surveying design space compared to more computationally-expensive approaches such as EM-PIC, it could be prudent to invest in the research and development of models to include the effects of anode plasma such as ion emission in circuit codes. The variable-impedance MITL design is a new concept that enables controlled manipulation of the initial electron losses in the outer MITL and can be tested on Z today. We encourage follow-on work to explore further optimization (including alternative variable-impedance profiles, e.g., having constant dZ/dR), and to confirm the major findings presented in this report by fielding test hardware on actual Z shots.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Aggregation of One–Dimensional Wires: The Case of Long Oligoynes

We show an unexpected aggregation phenomenon of a long oligoyne (Py[16]) with 16 contiguous triple bonds and endcapped with bulky 3,5-bi(3,5-bis-tert-butylphenyl)pyridine groups. Aggregation of 1D π-conjugated oligoyne chains is rare given the minimal π–π intermolecular interactions as well as its flexibility that works against self-assembly. In dilute solutions, the reversible aggregation of Py[16] initiates at low temperature in the range of 140–180 K, and is not observed for shorter oligoynes in this series. Cryogenic UV/Vis electronic absorption spectra and vibrational Raman spectra with different laser wavelength lines tuning from in-resonance to off-resonance conditions have been used to extract the vibrational features characterizing the monomer and aggregate species. Theoretical calculations complement the spectroscopic findings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Organic Direct-Bonded-Copper-Based Rapid Prototyping for Silicon Carbide Power Module Packaging

Silicon carbide (SiC) power devices are playing ever- growing roles in high-power-density power electronics converters by offering benefits such as high voltage rating, fast transients, and high thermal performance. Organic direct-bonded copper (ODBC)-based packaging, due to its ductility and ease of han- dling, allows the possibility of a more flexible layout design that may better tap the potential of SiC benefits. In this work, an ODBC-based prototyping routine is developed that accelerates the iterations of packaging layout design with low cost. The properties of ODBC and its handling are briefly introduced, and tools and fabrication steps are explained. Following this routine, a 1.2-kV SiC half-bridge power module is designed and fabricated with the focus on sub-nanohenry ultra-low loop inductance. Simulation and experimental validation are also conducted.

25 ENERGY STORAGE↗
DOE OSTI2024

Planar Transformer Systems for Modular Power Electronics in Long-Haul, Low-Cost PV Systems

This project successfully developed and verified a new approach for medium voltage (MV) planar transformers for use in emerging, utility-scale, modular PV systems. This approach simplifies their manufacture, improves their isolation capability, lowers their cost, and reduces their volume and loss, while also creating flexibility in the materials that can be used.

14 SOLAR ENERGY↗
DOE OSTI2025

Infiltrated electrodes for metal supported solid oxide electrolysis cells

Metal-supported solid oxide cells (MSOCs) are an alternative to conventional solid oxide cells (SOCs) based on ceramic cermets, offering lower material costs and higher operational flexibility. In this study symmetric MSOCs with infiltrated electrodes are explored for steam electrolysis operation to understand the underlying operation and degradation principles and suggest a direction for future MSOCs development. Two different fuel electrode backbones are used: an electronically-conductive lanthanum strontium co-doped iron nickel titanate (LSFNT) infiltrated with cerium-gadolinium oxide (CGO), or an ionic conductive zirconia based backbone (10ScYSZ) infiltrated with Ni:CGO. At the oxygen side, the backbone is 10ScYSZ, which is infiltrated with lanthanum-strontium co-doped cobalt oxide (LSC), or praseodymium oxide as cobalt-free alternative for comparison. This study suggests that the backbone electronic conductivity is key for good electrochemical performance as well as for boosting cell durability. Highly electronically conductive nanoparticles, especially nickel, were observed to irreversibly agglomerate driven by thermal conditions, whereas CGO proved to be a very stable electrocatalyst. At the fuel side, CGO (LSFNT) electrode showed lower ASR and degradation rate than Ni:CGO(ScYSZ) configuration with measured values of 0.50 Ω cm2 and 11 %/1000 h (at 0.60 A/cm2), and 0.70 Ω cm2 and 26 %/1000 h (at 0.50 A/cm2) at 1.30 V, respectively (700 °C, 50 % steam in hydrogen at the fuel side and air at the oxygen electrode side, LSC(ScYSZ) oxygen electrode).

25 ENERGY STORAGE↗
DOE OSTI2025

A Probabilistic Model for Global EMIC Wave Activity Using Van Allen Probes Observations

Electromagnetic ion cyclotron (EMIC) waves play a key role in radiation belt dynamics through resonant interactions. However, their low occurrence probability, high variability, and spatial intermittency pose challenges for accurate modeling. In this study, we present a machine learning (ML)-based global EMIC wave model built on the entire data set from the Van Allen Probes mission. To capture the distinct statistical characteristics of wave occurrence and amplitude, the model is separated into two modules: an occurrence model trained using ML techniques, and a wave amplitude model sampled from observed probability distributions. The input parameters are limited to real-time or predictable variables to ensure practical applicability. Our model shows strong performance across the entire test set and demonstrates improved predictive capability over a baseline random occurrence model, particularly during quiet geomagnetic conditions. Evaluation during both quiet and active periods confirms the model's ability to represent the clustered and intermittent nature of EMIC wave activity. Furthermore, the model provides global estimates of wave power, enabling integration with radiation belt electron data and showing signatures consistent with wave-induced scattering. We found a good correlation between the global wave activity from the model and relativistic electron observation by Van Allen Probes, regardless of the availability of in situ wave observations. The modular structure of the model also allows for straightforward expansion for additional wave properties, such as wave frequency, which can be modeled independently. This flexible, event-sensitive approach offers a promising framework for data-driven radiation belt simulations and space weather applications.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Chain rigidity controlled aggregation ability and solid-state microstructures for efficient stretchable conjugated polymer films

Stretchable conjugated polymer films with good electrical performance under mechanical deformation are highly desirable for soft electronics. However, the mechanical and electrical properties of these films, particularly in conjugated polymer:elastomer blends, are not fully understood at molecular level. Here, this study explores the relationships among molecular structure, aggregation ability, film microstructure, and the electrical/mechanical properties of three diketopyrrolopyrrole-based conjugated polymers (P1, P2, P3) with decreasing backbone rigidity and their corresponding polymer:elastomer blends. The most flexible polymer P3 shows strong aggregation, which forms highly crystalline fibers to produce fragile neat film and produces large isolated crystallites restricting charge transport in blend film. As chain rigidity increases, the P1 and P2 polymers show weaker aggregation, and produce smaller crystallites in neat films with enhanced ductility. P1 and P2 based blend films display nanocrystallites polymer networks with dispersed elastomer domains. As a result, we achieved near-constant charge mobility before and after stretching under 50 % strain for P2-based blend films with well-controlled pathways for both charge transport and energy dissipation. This study demonstrates the critical role of backbone rigidity in regulating the properties of stretchable conjugated polymer films, paving the way for more reliable and deformable materials in soft electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Deformable phrase level attention: A flexible approach for improving AI based medical coding

Objective: Improving the AI-driven automated medical encoding of clinical text plays a vital role in gathering information on the occurrence of diseases to improve population-level health. This work presents a novel attention mechanism designed to enhance text classification models and ensure appropriate classification of medical concepts in unstructured electronic health records. Materials and Methods: We developed a deformable, phrase-level attention mechanism to identify important lexical word-level and contextual phrase-level information from clinical text documents. We evaluated conventional and transformer-based deep learning models that we extended with our attention mechanism on the extraction of critical cancer information (e.g., site, subsite, laterality, histology, behavior) from 629,908 electronic pathology reports and on the automated medical encoding of 52,722 hospital discharge summaries. Results: Transformer-based models with the deformable, phrase-level attention mechanism achieved the best performance on the extraction of critical cancer information from pathology reports. Conventional- and transformer-based models show similar or better performance than their baseline counterparts on the automated medical encoding of clinical documents. Discussion: The addition of phrase-level information allowed models extended with our proposed method to outperform standard word-level attention. Our method showed favorable properties for the real-world application in terms of model robustness and phenotyping. These results indicate that our method is promising for automated data harmonization for common data models. Conclusion: This work proposes a novel deformable, phrase-level attention mechanism that enhances text classification models in the extraction of medical concepts from clinical text documents. We demonstrate strong performances on two clinical text datasets and showcase real-world deployability of our method.

Automated medical encoding↗
DOE OSTI2024

Superior Piezo-/Ferro-Electricity in Antiferroelectric Ag x NbO 3-δ Thin Films by Nanopillar Local Structure Design

Antiferroelectrics are fundamental mother compounds critical in developing innovative lead-free piezoelectrics and ferroelectrics and hold great promise for wide-ranging applications in energy conversion and electronic devices. However, harnessing their superior properties presents a significant challenge due to the delicate balance required between their various states. Here, in this study, through the unique design of nanopillar structures to alleviate the local polar heterogeneity, we have achieved significantly improved piezo-/ferro-electricity in classic lead-free antiferroelectric Ag x NbO 3-δ (x = 1, 0.9, and 0.8) epitaxial thin films. The effective piezoelectric coefficient reaches 440 pm V –1 , 1 order of magnitude larger than the stoichiometric AgNbO 3 , rivaling classic lead zirconate titanate piezoelectrics. Atomic-scale electron microscopy investigations unravel the underlying mechanisms. The nanopillars, characterized by antisite occupancy of both Ag and Nb atoms and forming out-of-phase boundaries with the matrix, reduce the local crystal symmetry via interphase strain. This leads to the creation of flexible multinanodomain structures that significantly facilitate polarization rotation, thus substantially enhancing the piezoelectric performance. This study demonstrates the feasibility of engineering local heterogeneity through nanopillar design, offering a generally applicable method for property improvement of a wide range of antiferroelectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Guest Editorial Special Section on Advanced Medium-Voltage Power Electronics for Grid Interactive Applications

Medium-voltage power electronics (MVPE) plays essential roles in power grid modernization and links the MV distribution grid with low-voltage consumers and prosumers. Various MVPE devices, such as solid-state transformers or circuit breakers, inverter-based resources, power flow controllers, etc., bring the benefits of voltage conversion and power regulation in small footprint, power quality and efficiency improvements, and enhancements of grid controllability, flexibility, stability, and resilience. The MVPE also makes it possible for sustainable energy systems, such as solar/wind farms and energy storage generating facilities, to directly access to MV grids without multistage conversions. With their intrinsic intelligence and communications, MVPE enables many new smart grid functions and applications, e.g., dc interconnections and electric vehicle charging, which were not envisioned by traditional power grids otherwise. In addition, the integration of physical power processing units with cyber components forms a cyber-physical system, which is essential for long-term sustainability, development, and environmental preservation. Nonetheless, technical challenges on MVPE device reliability, scalable and efficient converter topologies, control stability, large-scale modeling and simulation, to name a few, need to be addressed and advanced to the next level. In conclusion, this Special Section on Advanced MV Power Electronics for Grid Interactive Applications in IEEE Transactions on Power Electronics (TPEL) provides an insight on some of the recent advances in MVPE and emerging challenges and potential solutions.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Microstructure characteristics of LPBF&HIP fabricated graded composite transition joint between ferritic steel and austenitic stainless steel

Graded composite transition joints (GCTJs) offer a promising alternative to conventional dissimilar metal welds (DMWs) by enabling smooth compositional and microstructural transitions. However, GCTJs fabricated solely through additive manufacturing (AM) face challenges such as heat accumulation, complex parameter control, and elemental segregation. In this study, we propose a novel approach that relies on AM to design a spatially graded structure in one alloy and then employs hot isostatic pressing (HIP) as a diffusion bonding method to join it with a second alloy. Here, this method combines the flexibility of AM with the powder net-shaping advantage of HIP. Specifically, a series of closely packed austenitic stainless steel 304 conical structures were printed using laser powder bed fusion (LPBF) and then combined with ferritic steel P91 powder via HIP. By using electron backscatter diffraction (EBSD), electron probe microanalysis (EPMA), and transmission electron microscopy (TEM) techniques, the microstructure characteristics of the GCTJ of 304&P91, especially the interdiffusion zone (IDZ), have been systematically investigated. The microstructure at the interface transitions from austenite-ferrite (A+F) to austenite-martensite-ferrite (A+M+F), and finally to martensite-ferrite (M+F) due to diffusion. Additionally, the diffusion width between 304 and P91 increases with the volume fraction of P91. This unique design also ensures a gradual transition in both hardness and thermal expansion coefficient from 304 to P91, thereby enabling a smooth gradient in functional properties. Overall, this study proposes a novel approach for fabricating GCTJs and contributes to advancing design concepts in the field of dissimilar metal joining.

Additively manufacturing (AM)↗
DOE OSTI2024

A Modular 512-Channel Neural Signal Acquisition ASIC for High-Density 4096 Channel Electrophysiology

The complexity of information processing in the brain requires the development of technologies that can provide spatial and temporal resolution by means of dense electrode arrays paired with high-channel-count signal acquisition electronics. In this work, we present an ultra-low noise modular 512-channel neural recording circuit that is scalable to up to 4096 simultaneously recording channels. The neural readout application-specific integrated circuit (ASIC) uses a dense 8.2 mm × 6.8 mm 2D layout to enable high-channel count, creating an ultra-light 350 mg flexible module. The module can be deployed on headstages for small animals like rodents and songbirds, and it can be integrated with a variety of electrode arrays. The chip was fabricated in a TSMC 0.18 µm 1.8 V CMOS technology and dissipates a total of 125 mW. Each DC-coupled channel features a gain and bandwidth programmable analog front-end along with 14 b analog-to-digital conversion at speeds up to 30 kS/s. Additionally, each front-end includes programmable electrode plating and electrode impedance measurement capability. We present both standalone and in vivo measurements results, demonstrating the readout of spikes and field potentials that are modulated by a sensory input.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Rapid Oxidation of Uranium Steel Alloys: Combustion Synthesis

This project explored the use of combustion synthesis as a rapid, high-temperature method for oxidizing uranium-bearing steel alloys. Traditional laboratory-scale synthesis methods often fail to replicate the thermal and kinetic conditions experienced by real-world particulates, particularly those formed under rapid quenching or high-temperature scenarios. Combustion synthesis offers a promising alternative by enabling fast, localized heating and flexible precursor selection. A series of targeted experiments were conducted using a U 2 NiCrFe 4 alloy as the precursor. The alloy was oxidized using combustion synthesis reactions fueled by uranyl nitrate and glycine, achieving peak temperatures exceeding 1,200 °C. Postreaction analysis using scanning electron microscopy (SEM), elemental mapping, and Raman spectroscopy revealed the formation of iron-based oxides, with limited but detectable evidence of uranium oxide phases such as UO 2 . The results indicate that under the rapid reaction and cooling conditions of combustion synthesis, iron oxides form preferentially, but uranium oxide formation is kinetically limited. These findings validate combustion synthesis as a viable method for simulating the oxidation behavior of uranium steels in extreme environments and lay the groundwork for future studies aimed at enhancing uranium oxide formation through higher temperatures or modified precursor compositions.

36 MATERIALS SCIENCE↗