Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogen development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

DEVELOPMENT OF A HYDROGEN AND DEUTERIUM POLARIZED GAS TARGET FOR APPLICATION IN STORAGE RINGS

The exploration of spin degrees of freedom in nuclear and high-energy interactions requires the use of spin-polarized projectiles and/or spin-polarized targets. During the last two decades, the use of external beams from cyclotrons has to a large extent been supplanted by use of circulating beams stored in storage rings. In these experiments, the circulating particles pass millions of times through targets internal to the ring. Thus the targets need to be very thin to avoid beam loss by scattering out of the acceptance aperture of the ring.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DEVELOPMENT OF A HYDROGEN ISOTOPE EXTRAPOLATION CURVE FOR PLATINUM CATYLIZED ZEOLITE

Experiments were conducted in 2003 and 2004 with protium and deuterium to demonstrate the hydrogen exchange properties of various catalyzed zeolites for tritium stripping purposes. A column was loaded with the experimental material and purged with either H{sub 2} or D{sub 2} as shown in Figure 1 and the effluent monitored with a Prisma Quadrupole. The purge gas was switched when the column outlet concentrations reached >95% of the purge isotope. Outlet concentrations were calculated as the sum of the purge isotope in the elemental form plus the purge isotope in the oxide form (the purge stream was humidified as it passed through the column) divided by the total hydrogen isotopes in the effluent. 1.5 wt.% Pt on CBV 780 zeolite, manufactured by Zeolist International, had the best exchange characteristics, high capacity and fast kinetics, of the materials tested. This memorandum describes an approach to extrapolate previously unpublished hydrogen for deuterium exchange data collected earlier on 1.5 wt.% Pt on CBV 780 to lower concentrations for potential engineering applications.

08 HYDROGEN↗

Design and development of liquid hydrogen mixer unit

A dc brushless motor driven mixer unit (a vaneaxial fan) was designed and evaluated for use in cryogenic fluids (liquids and gases). It was found to operate well in all fluids in which it was tested. The test fluids were liquid and gaseous helium, hydrogen in the liquid phase gas phase and mixtures of the two phases, and liquid nitrogen. It operated for over 100 hr at cryogenic temperatures without damage to the bearings and at the conclusion of testing the condition of the bearings was such that an operational life of 5000 hr appeared possible. The unit demonstrated that (with the brushless dc motor principle) useful pumping of cryogenic fluids could be accomplished with very small power inputs to the mixer motor. During test, the motor input power varied from approximately 0.5 W to 2.5 W, depending on fluid density. The high power input produced a mixer efficiency of over 49 percent. In an earlier program (see NASA Report CR-72365), a mixer using an ac induction motor demonstrated an efficiency of 17.7 percent under the same conditions, illustrating the advantage of the dc brushless motor driven unit. The mixer also demonstrated its ability to automatically vary speed as a function of the density of the fluid being pumped. This causes the unit to deliver higher volumetric flow rates as fluid density decreases.

Morgan, R. W.↗

Development of improved hydrogen recombination in sealed nickel-cadmium aerospace cells

The identification and measurement of a hydrogen recombination mechanism in nickel-cadmium cells has made deep reconditioning on a battery basis safe and feasible. Deep reconditioning has been shown to improve performance and increase life of nickel-cadmium batteries in geosynchronous orbit applications. The hydrogen recombination mechanism and data supporting the mechanism are presented. Parameteric cell design experiments are described which have lead to the definition of nickel-cadmium cells capable of high rate overdischarge. Nickel-cadmium cells with optimum hydrogen recombination capability were successfully cycled for 7 seasons in simulation of the geosynchronous orbit regime at 75 percent depth-of-discharge with extensive midseason and end-of-season overdischarge at rates ranging from C/4 to C/20.

Ritterman, P. F.↗

Development of nickel hydrogen battery expert system

The Hubble Telescope Battery Testbed employs the nickel-cadmium battery expert system (NICBES-2) which supports the evaluation of performances of Hubble Telescope spacecraft batteries and provides alarm diagnosis and action advice. NICBES-2 also provides a reasoning system along with a battery domain knowledge base to achieve this battery health management function. An effort to modify NICBES-2 to accommodate nickel-hydrogen battery environment in testbed is described.

Shiva, Sajjan G.↗

ALS liquid hydrogen turbopump: Advanced Development Program

The point of departure (POD) turbopump concept was reviewed and finalized. The basis for the POD was the configuration presented in the Aerojet proposal. After reviewing this proposal concept, several modifications were made. These modifications include the following: (1) the dual pump discharge arrangement was changed to a single discharge; (2) commonality of the turbine inlet manifold with the advanced launch system (ALS) liquid oxygen (LOX) TPA was dropped for this program; (3) the turbine housing flange arrangement was improved by relocating it away from the first stage nozzles; (4) a ten percent margin (five percent diameter increase) was built into the impeller design to ensure meeting the required discharge pressure without the need for increasing speed; (5) a ten percent turbine power margin was imposed which is to be obtained by increasing turbine inlet pressure if required; and (6) the backup concept, as an alternative to the use of cast impellers, now incorporates forged/machined shrouded impellers, rather than the unshrouded type originally planned.

Shimp, Nancy R.↗

Development of a hydrogen external burning flight test experiment on the NASA Dryden SR-71A aircraft

A captive-carry flight test experiment of the transonic external burning concept using gaseous hydrogen fuel has ben proposed for the SR-71A flight research test bed aircraft at the NASA Dryden Flight Research Facility, Edwards, California. This program will be the first large-scale, near-field flight test investigation of this base drag reduction technique at Mach numbers up to 3. Low-speed base drag reduction for supersonic and hypersonic flight vehicles is important in reducing vehicle drag and improving nozzle efficiency. Flight data will be correlated with a concurrent wind tunnel ground test of a similar test apparatus to confirm geometry and component performance scalability predictions and to investigate design parametrics under actual flight conditions. This paper describes the problem of transonic base drag for supersonic and hypersonic aircraft, a planned flight research program to address this problem, the test bed aircraft, and the flight experiment apparatus.

Hicks, John W.↗

Development of a hydrogen gas sensor using microfabrication technology

Microfabrication and micromachining technologies are used to produce a hydrogen gas sensor based on a palladium-silver film. The sensor uses a heater that is fabricated by diffusing p-type borones into the substrate, forming a resistance heater. A diode for temperature measurement is produced using p-type boron and n-type phosphor diffused into the substrate. A thickness of the palladium-silver film is approximately 300 arcsec. The hydrogen gas sensor employs the proven palladium-silver diode structure and is surrounded by a phosphor doped resistance heater which can be heated up to a temperature of 250 C. Experimental results show that the sensor is capable of operating over a wide range of hydrogen concentration levels between 0-95 percent without any hysteresis effects.

Liu, Chung-Chiun↗