Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic liquid crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

MetILs 3 : A Strategy for High Density Energy Storage Using Redox-Active Ionic Liquids

We present a systematic approach for increasing the concentration of redox-active species in electrolytes for nonaqueous redox flow batteries (RFBs). Starting with an ionic liquid consisting of a metal coordination cation (MetIL), ferrocene-containing ligands and iodide anions are substituted incrementally into the structure. While chemical structures can be drawn for molecules with 10 m redox-active electrons (RAE), practical limitations such as melting point and phase stability constrain the structures to 4.2 m RAE, a 2.3× improvement over the original MetIL. Dubbed “MetILs 3 ,” these ionic liquids possess redox activity in the cation core, ligands, and anions. Throughout all compositions, infrared spectroscopy shows the ethanolamine-based ligands primarily coordinate to the Fe 2+ core via hydroxyl groups. Calorimetry conveys a profound change in thermophysical properties, not only in melting temperature but also in suppression of a cold crystallization only observed in the original MetIL. Square wave voltammetry reveals redox processes characteristic of each molecular location. Testing a laboratory-scale RFB demonstrates Coulombic efficiencies >95% and increased voltage efficiencies due to more facile redox kinetics, effectively increasing capacity 4×. Application of this strategy to other chemistries, optimizing melting point and conductivity, can yield >10 m RAE, making nonaqueous RFB a viable technology for grid scale storage.

25 ENERGY STORAGE↗

Layering, melting, and recrystallization of a close-packed micellar crystal under steady and large-amplitude oscillatory shear flows

The rheology and three-dimensional microstructure of a concentrated viscoelastic solution of the triblock copolymer poly(ethylene oxide){sub 106}-poly(propylene oxide){sub 68}-poly(ethylene oxide){sub 106} (Pluronic F127) in the protic ionic liquid ethylammonium nitrate are measured by small angle neutron scattering (SANS) under flow in three orthogonal planes. This solution's shear-thinning viscosity is due to the formation of two-dimensional hexagonal close-packed (HCP) sliding layer structure. Shear-melting of the crystalline structure is observed without disruption of the self-assembled micelles, resulting in a change in flow properties. Spatially resolved measurements in the 1–2 plane reveal that both shear-melting and sliding are not uniform across the Couette gap. Melting and recrystallization of the HCP layers occur cyclically during a single large amplitude oscillatory shear (LAOS) cycle, in agreement with the “stick-slip” flow mechanism proposed by Hamley et al. [Phys. Rev. E 58, 7620–7628 (1998)]. Analysis of 3D “structural” Lissajous curves show that the cyclic melting and sliding are direct functions of the strain rate amplitude and show perfect correlation with the cyclic stress response during LAOS. Both viscosity and structural order obey the Delaware–Rutgers rule. Combining rheology with in situ spatiotemporally resolved SANS is demonstrated to elucidate the structural origins of the nonlinear rheology of complex fluids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electric-field effect on photoluminescence of lead-halide perovskites

With the development of novel semiconductors for optoelectronic applications, new device functionalities utilizing unique characteristics of emerging materials can be particularly appealing. Here, we demonstrate a reversible control of photoluminescence (PL) emission from lead-halide perovskites achieved in perovskite electric-double-layer transistors. PL in several prototypical lead-halide perovskite compounds is shown to be reversibly tuned by a small gate voltage in the range ±1.2 V applied to the ionic-liquid gel on the perovskite surface, with the intensity modulation that can reach one to two orders of magnitude. This effect may be mediated by a reversible migration of oxygen ions affecting the crystal region near the interface with the ion gel. The resulting passivation (or activation) of non-radiative recombination centers (traps) by oxygen ions would then modulate the population of mobile photogenerated electrons and holes that give rise to PL, which is thus tuned with an electric “knob” (the gate) in these devices.

36 MATERIALS SCIENCE↗

A density functional theory based approach for predicting melting points of ionic liquids

Accurate prediction of melting points of ILs is important both from the fundamental point of view and from the practical perspective for screening ILs with low melting points and broadening their utilization in a wider temperature range. In this work, we present an ab initio approach to calculating melting points of ILs with known crystal structures and illustrate its application for a series of 11 ILs containing imidazolium/pyrrolidinium cations and halide/polyatomic fluoro-containing anions. The melting point is determined as a temperature at which the Gibbs free energy of fusion is zero. The Gibbs free energy of fusion can be expressed through the use of the Born-Fajans-Haber cycle via the lattice free energy of forming a solid IL from gaseous phase ions and the sum of the solvation free energies of ions comprising IL. Dispersion-corrected density functional theory (DFT) involving (semi)local (PBE-D3) and hybrid exchange-correlation (HSE06-D3) functionals is applied to estimate the lattice enthalpy, entropy, and free energy. The ions solvation free energies are calculated with the SMD-generic-IL solvation model at the M06-2X/6-31+G(d) level of theory under standard conditions. The melting points of ILs computed with the HSE06-D3 functional are in good agreement with the experimental data, with a mean absolute error of 30.5 K and a mean relative error of 8.5%. The model is capable of accurately reproducing the trends in melting points upon variation of alkyl substituents in organic cations and replacement one anion by another. The results verify that the lattice energies of ILs containing polyatomic fluoro-containing anions can be approximated reasonably well using the volume-based thermodynamic approach. However, there is no correlation of the computed lattice energies with molecular volume for ILs containing halide anions. Moreover, entropies of solid ILs follow two different linear relationships with molecular volume for halides and polyatomic fluoro-containing anions. As a result, continuous progress in predicting crystal structures of organic salts with halide anions will be a key factor for successful prediction of melting points with no prior knowledge of the crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray Nanoimaging of Crystal Defects in Single Grains of Solid-State Electrolyte Li 7–3x Al x La 3 Zr 2 O 12

All-solid-state lithium batteries promise significant improvements in energy density and safety over traditional liquid electrolyte batteries. The Al-doped Li 7 La 3 Zr 2 O 12 (LLZO) solid-state electrolyte shows excellent potential given its high ionic conductivity and good thermal, chemical, and electrochemical stability. Nevertheless, further improvements on electrochemical and mechanical properties of LLZO call for an in-depth understanding of its local microstructure. Here, we employ Bragg coherent diffractive imaging to investigate the atomic displacements inside single grains of LLZO with various Al-doping concentrations, resulting in cubic, tetragonal, and cubic-tetragonal mixed structures. We observe coexisting domains of different crystallographic orientations in the tetragonal structure. We further show that Al doping leads to crystal defects such as dislocations and phase boundaries in the mixed- and cubic-phase grain. This study addresses the effect of Al doping on the nanoscale structure within individual grains of LLZO, which is informative for the future development of solid-state batteries.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Micellar Mimicry of Intermetallic C14 and C15 Laves Phases by Aqueous Lyotropic Self-Assembly

Concentration-dependent supramolecular self-assembly of amphiphilic molecules in water furnishes a variety of nanostructured lyotropic liquid crystals (LLCs), which typically display high symmetry bicontinuous network and discontinuous micellar morphologies. Aqueous dispersions of soft spherical micelles derived from small molecule amphiphile hydration typically pack into exemplary body-centered cubic and closest-packed LLCs. However, investigations of hydrated mixtures of the ionic surfactant tetramethylammonium decanoate loaded with 40 wt % n-decane (TMADec-40) revealed the formation of a high symmetry bicontinuous double diamond LLC, as well as cubic C15 and hexagonal C14 Laves LLC phases that mirror the MgCu 2 and MgZn 2 intermetallic structure types, respectively. Detailed small-angle X-ray scattering analyses demonstrate that the complex C15 and C14 LLCs exhibit large unit cells, in which 12 or more ~3–4 nm diameter micelles of multiple discrete sizes arrange into tetrahedral close packing arrangements with exceptional long-range translational order. The symmetry breaking that drives self-assembly into these low-symmetry LLC phases is rationalized in terms of a frustrated balance between maximizing counterion-mediated micellar cohesion within the ensemble of oil-swollen particles, while simultaneously optimizing local spherical particle symmetry to minimize molecular-level variations in surfactant solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequential Capacitive Deposition of Ionic Liquids for Conformal Thin Film Coatings on Oxygen Reduction Reaction Electrocatalysts

Ionic liquid (IL)-modified carbon-supported catalysts have demonstrated significant improvements in oxygen reduction reaction (ORR) activity. However, transition of this result from the half-cell to the proton exchange membrane fuel cell (PEMFC) has been challenging. Presented here is a processing methodology that yields the formation of a thin (<2 nm) conformal IL coating on the surface of both three-dimensional electrocatalysts and bulk single crystals through the sequential capacitive deposition (SCD) of anionic and cationic components and their subsequent condensation into a hydrophobic, protic IL. In conclusion, SCD shows promise for IL incorporation into preformed PEMFC catalyst layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionothermal synthesis and crystal structures of metal phosphate chains

We have prepared isostructural aluminium and gallium phosphate chains by ionothermal reactions in 1-ethyl-3-methylimidazolium bromide and 1-ethylpyridinium bromide under a variety of conditions. The chains can be prepared as pure phases or along with three dimensional framework phases. The chains are favoured at shorter heating times and the crystallinity can be improved by addition of transition metal acetates and amines which are not included in the final structure. The chain can be prepared with or without the presence of hydrofluoric acid. - Graphical abstract: Chain structures prepared from ionic liquid solvents under a wide variety of synthesis conditions.

36 MATERIALS SCIENCE↗

Multistage nucleation pathway in LiF molten salt mirrors the crystal–melt interface structure

Despite over a century of studies, fundamental questions remain about the processes governing crystal nucleation from melts or solutions. Research over the past three decades has presented mounting evidence for kinetic pathways of crystal nucleation that are more complex than envisioned by the simplest forms of classical theory. Such observations have been presented for colloidal and elemental systems with covalent and metallic bonding. Despite the technological and geochemical importance of molten salts, similar studies for these ionically bonded systems are currently lacking. Here we develop a machine learning interatomic potential for a model ionic system: LiF. The potential features quantum-level accuracy for both liquid and multiple solid polymorphs over wide temperature and pressure ranges and accurately reproduces experimentally measured properties. Thanks to the efficiency of the potential, which enables microsecond-scale molecular dynamics simulations, induction times for nucleation of LiF solids from their melts are computed over a range of undercoolings. With the aid of a set of robust local order parameters established here, the simulations reveal that homogeneous crystal nucleation in undercooled melts preferentially initiates from liquid regions showing slow dynamics and high bond orientational order simultaneously, and the second-shell order of both precritical nuclei and the surface of postcritical nuclei is dominated by hexagonal close packing and body-centered cubic local structure, even though the nucleus core is dominated by face-centered cubic structure corresponding to the stable rocksalt crystal structure. Finally, we establish a connection between the crystallization pathway and the equilibrium crystal-melt interface structure.

Applied Physical Sciences↗

Solvate Structures and Computational/Spectroscopic Characterization of LiPF6 Electrolytes

Raman spectroscopy is a powerful method for identifying ion-ion interactions, but only if the vibrational band signature for the anion coordination modes can be accurately deciphered. The present study characterizes the PF6- anion P-F Raman symmetric stretching vibrational band for evaluating the PF6-...Li+ cation interactions within LiPF6 crystalline solvates to create a characterization tool for liquid electrolytes. To facilitate this, the crystal structures for two new solvates—(G3)1:LiPF6 and (DEC)2:LiPF6 with triglyme and diethyl carbonate, respectively—are reported. The information obtained from this analysis provides key guidance about the ionic association information which may be obtained from a Raman spectroscopic evaluation of electrolytes containing the LiPF6 salt and aprotic solvents. Of particular note is the overlap of the Raman bands for both solvent-separated ion pair (SSIP) and contact ion pair (CIP) coordination in which the PF6- anions are uncoordinated or coordinated to a single Li+ cation, respectively.

crystal structure↗

Exploring the Nature of f-Element Soft Donor Interactions Using Electronically Tunable Azolate Ionic Liquids

This project was undertaken to advance the understanding of how f-elements interact with moderately soft donors, a heavily investigated yet open question which is of prime importance in spent nuclear fuel processing and fundamental inorganic chemistry. During the course of the project, based on exciting results, a stretch goal was developed to study the hydrolysis products of transuranic actinide metals, a somewhat understudied field even with its significance in nuclear fuel cycle and impacts in environmental chemistry. The stretch goal was to take our serendipitous discovery of an easy route to isolation of crystalline multinuclear ƒ-element hydrolysis products, and apply it to gaining a mechanistic understanding of Pu(III/IV) colloid formation. The simplicity of our techniques should lend themselves to the remote handling required for study of many transuranic elements. We developed several methodologies using azolium azolate chemistry to overcome ƒ-element hydrolysis problems that prohibit the isolation of ƒ-element soft donor complexes and to build a crystallographic library of ƒ-element N-donor complexes as a means to understand the fundamental differences between actinide and lanthanide interactions with moderately soft donor ligands. Our next major endeavor will be to transfer this chemistry from 4ƒ elements to transuranic elements, particularly in the study of hydrolysis of Pu(III/IV). While our work is fundamental in nature, applications of the knowledge we are generating should be felt in such diverse fields as catalysis, separations in general, nuclear waste remediation specifically, and many other applications in f-element magnetic and luminescent properties. The potential ramifications of the consistent and robust formation of hydrolysis controlled hexanuclear lanthanide structures are enormous, with future uses being catalyst formation, higher-nuclearity structure synthesis using our hexanuclear motif as a fundamental building block, Pu waste remediation, separations, and many other potential applications resulting from characteristic magnetic and luminescent properties of lanthanide polynuclear structures. Three synthetic methodologies (direct mixing with variable stoichiometries, use of volatile solvent, metathesis) were developed starting with 7 acidic and 6 basic azoles to obtain ionic liquids suitable for f-element coordination. Proton transfer by acidic/basic azole combination led to suitable low melting salts and two cocrystals. Acid/base reaction of azoles with soft-donor permanent cations of ([X 4444 ][OH] (where [X 4444 ] + = tetrabutylammonium [N 4444 ] + or tetrabutylphosphonium [P 4444 ] + ) with weakly acidic azoles including imidazole, 1,2,3-triazole, 1,2,4-triazole, 5-aminotetrazole, 4,5-dicyanoimidazole, and 2-amino-4,5-dicyanoimidazole) revealed several suitable low-melting salts. Metathesis reactions of Na(azolate) were conducted by first using weakly acidic azoles including 4,5-dicyanoimidazole, 2-amino-4,5-dicyanoimidazole, 5-aminotetrazole, and 1,2,4-triazole to form sodium or lithium salts using group(I) hydroxides in methanolic solutions. The best results were obtained by reacting the basic and acidic azoles directly in 1:1 or 3:1 ratios at elevated temperatures. Twenty-two azole mixtures were identified which are either low melting solids or room temperature liquids. Each of the low melting solids was confirmed to be a new solid phase, each of which is being further characterized. The liquids and solids are anticipated to be ILs, eutectics, or partially ionized systems, all of which will be suitable for the dissolution of f-element salts. Five new synthetic methodologies were developed to finding suitable crystallization conditions for f-element complexation with the goal of finding simple one pot reaction syntheses and crystallization strategies that could be used under the demanding conditions of transuranic chemistries. These synthetic methods yield many new crystalline phases which were studied by single crystal X-ray diffraction.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Ginzburg-Landau theory for the solid-liquid interface of bcc elements. II - Application to the classical one-component plasma, the Wigner crystal, and He-4

The previously developed Ginzburg-Landau theory for calculating the crystal-melt interfacial tension of bcc elements to treat the classical one-component plasma (OCP), the charged fermion system, and the Bose crystal. For the OCP, a direct application of the theory of Shih et al. (1987) yields for the surface tension 0.0012(Z-squared e-squared/a-cubed), where Ze is the ionic charge and a is the radius of the ionic sphere. Bose crystal-melt interface is treated by a quantum extension of the classical density-functional theory, using the Feynman formalism to estimate the relevant correlation functions. The theory is applied to the metastable He-4 solid-superfluid interface at T = 0, with a resulting surface tension of 0.085 erg/sq cm, in reasonable agreement with the value extrapolated from the measured surface tension of the bcc solid in the range 1.46-1.76 K. These results suggest that the density-functional approach is a satisfactory mean-field theory for estimating the equilibrium properties of liquid-solid interfaces, given knowledge of the uniform phases.

Zeng, X. C.↗

Hierarchical TiO 2 :Cu 2 O Nanostructures for Gas/Vapor Sensing and CO 2 Sequestration

We investigate the effect of high-surface-area self-assembled TiO 2 :Cu 2 O nanostructures for CO 2 and relative humidity gravimetric detection using polyethylenimine (PEI), 1-ethyl-3-methylimidazolium (EMIM), and polyacrylamide (PAAm). Introduction of hierarchical TiO 2 :Cu 2 O nanostructures on the surface of quartz crystal microbalance sensors is found to significantly improve sensitivity to CO 2 and to H 2 O vapor. The response of EMIM to CO 2 increases fivefold for 100 nm-thick TiO 2 :Cu 2 O as compared to gold. At ambient CO 2 concentrations, the hierarchical assembly operates as a sensor with excellent reversibility, while at higher pressures, the CO 2 desorption rate decreases, suggesting possible application for CO 2 sequestration under these conditions. The gravimetric response of PEI to CO 2 increases by a factor of 3 upon introduction of a 50 nm TiO 2 :Cu 2 O layer. The PAAm gravimetric response to water vapor also increases by a factor of 3 and displays improved reversibility with the addition of 50 nm TiO 2 :Cu 2 O structures. We found that TiO 2 :Cu 2 O can be used to lower the detection limits for CO 2 sensing with EMIM and PEI and lower the detection limits for H 2 O sensing with PAAm by over a factor of 2. Coarse-grained and all-atom molecular dynamics simulations indicate the dissociative character of ionic liquid assembly on TiO 2 :Cu 2 O interfaces and different distributions of CO 2 and H 2 O molecules on bare and ionic liquid-coated surfaces, confirming experimental observations. Overall, our results show high potential of hierarchical assemblies of TiO 2 :Cu 2 O/room temperature ionic liquid and polymer films for sensors and CO 2 sequestration.

36 MATERIALS SCIENCE↗

Li 15 P 4 S 16 Cl 3 , a Lithium Chlorothiophosphate as a Solid-State Ionic Conductor

Tremendous efforts have been devoted to the design of solid Li + electrolytes and the development of all-solid-state batteries. Compared with conventional Li-ion batteries, which use flammable liquid organic electrolytes, all-solid-state batteries show significant advantages in safety. In this work, a novel lithium chlorothiophosphate compound, Li 15 P 4 S 16 Cl 3 , is discovered. The crystal structure and electrochemical properties are investigated. Li 15 P 4 S 16 Cl 3 can be synthesized as a pure phase via a facile solid-state reaction by heating a ball-milled mixture of Li 2 S, P 2 S 5 , and LiCl at 360 °C. The crystal structure of Li 15 P 4 S 16 Cl 3 was refined against neutron and synchrotron powder X-ray diffraction data, revealing that it crystallizes in the space group $I\bar{4}3d$. Furthermore, the Li + transport in Li 15 P 4 S 16 Cl 3 was also investigated by multiple solid-state NMR methods, including variable-temperature NMR line-shape analysis, NMR relaxometry, and pulsed-field-gradient NMR. Li 15 P 4 S 16 Cl 3 shows good thermodynamic stability and can be synthesized at relatively low temperature. Although it exhibits a low ionic conductivity at room temperature, it can serve as a new motif crystal structure for the design and development of new solid-state electrolytes.

25 ENERGY STORAGE↗

Structural unit charge density and molecular cation templating effects on orientational geometric isomerism and interlayer spacing in 2-D uranyl sulfates

The new uranyl aqua sulfate compound [({CH_3}{sub 3}N{sub 2}C{sub 3}H{sub 3}{CH_2COOH})(H{sub 3}O)] [(UO{sub 2}){sub 2}(SO{sub 4}){sub 3}(H{sub 2}O)]·1.5H{sub 2}O was synthesized and the crystal structure determined. The two-dimensional uranyl-aqua sulfate compound exhibits a previously reported anionic structural unit topology, but features an interstitial complex incorporating hydronium in the form of a disorder Zundel cation and the cation moiety from the ionic liquid 1-carboxymethyl 3-methylimidazolium bistriflimide [HBetMIm][Tf{sub 2}N], which forms hydrogen bonding dimer pairs. An analysis of similar uranyl sulfate complexes from the literature is conducted to explore the relative importance and role of structure directing factors in alkylammonium charge-balanced two-dimensional uranyl sulfates. A correlation is observed between structural unit charge density and interlayer spacing, with a concomitant direction of structural and orientational geometric isomerism of the anionic structural unit. We discuss the role of synthetic conditions and molecular cation properties in directing structural unit formation through charge density matching and hydrogen bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A New Family of Ionic Liquids 1-amino-3-alkyl-1,2,3-Triazolium Nitrates

A new class of ionic liquids based upon 1-amino-3-alkyl-1,2,3-triazolium nitrates (alkyl = methyl, ethyl, n-propyl, 2-propeny1, and n-butyl) have been synthesized and characterized by vibrational spectra, multinuclear NMR, elemental analysis, and DSC studies. A single crystal x-ray study was carried out for 1-amino-3-methyl-1,2,3-triazolium nitrate and the details will be presented.

Drake, Greg↗

Template-free solution approach to synthesize CdS dendrites with SCN based ionic liquid

Highlights: {yields} Template-free solution approach to synthesize CdS hierarchical dendrites. {yields} The 1-butyl-3-methlyimidazole thiocyanate ([BMIM][SCN]) plays doubly functional roles in the progress. {yields} The CdS hierarchical dendrites exhibit a more intense emission at 710 nm belongs to infrared band. -- Abstract: Cadmium sulfide dendrites were synthesized by a facile hydrothermal treatment from CdCl{sub 2} and ionic liquid 1-butyl-3-methlyimidazole thiocyanate acted both as sulfur source and surfactant. The product was characterized by means of X-ray powder diffraction and scanning electron microscopy. X-ray powder diffraction studies indicated that the product was well-crystallized hexagonal phase of CdS, and the scanning electron microscopy images showed that the obtained powders consisted of a wealth of well-defined CdS dendritic microstructures with a pronounced trunk and highly ordered branches. The UV-Vis and photoluminescence spectroscopy measurements were taken as well. The possible formation mechanism of CdS dendrites was simply proposed in the end.

36 MATERIALS SCIENCE↗

Li 2 GeS 3 : Lithium Ionic Conductor with an Unprecedented Structural Type

Lithium-ion batteries (LIBs) are widely used in electric vehicles, mobile electronic devices, and large-scale stationary energy storage systems. However, their liquid electrolytes present significant safety concerns due to their inherent flammability. To address this, the focus has shifted toward all-solid-state batteries (ASSBs) utilizing inorganic solid electrolytes that promise enhanced safety. In this work, we report the discovery of a new crystal structural type of Li-ion conductor, Li 2 GeS 3 , with a unique structure, synthesized by a solid-state reaction from Li 2 S and GeS 2 . It was first reported in 2000 with an orthorhombic unit cell, but its detailed crystal structure remains veiled. Here, we have unveiled its structure for the first time, employing an ab initio structure determination technique from powder X-ray and time-of-flight neutron diffraction data. The compound has an unprecedented crystal structural type with a hexagonal $P6_1$ symmetry and a unit cell of α = 6.79364(4) Å and c = 17.90724(14) Å. Its structure is comprised of a distorted hexagonal close-packed arrangement of sulfur anions with three asymmetric metal atoms: Li1, Li2, and Ge are in tetrahedral cavities surrounded by sulfur atoms. The ionic conductivity of Li 2 GeS 3 was measured to be 1.63 × 10 –8 S cm –1 at 303 K and 2.45 × 10 –7 S cm –1 at 383 K. Bond valence energy landscape calculations revealed three-dimensional lithium diffusion pathways within the structure. This novel crystal structure in Li 2 GeS 3 holds the potential for developing high-performance ionic conductors through suitable chemical substitution and offers valuable insights into designing new ionic conductors for ASSBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗