Search NASA⌕ Search

SEARCH · Search NASA

Results for “layout”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Layout tool Patent

Design and development of layout tool for machine shop use to locate point in precise reference to straight or bowed reference edge

Green, R. G.↗

A general method for the layout of ailerons and elevators of gliders and motorplanes

A method is described which allows the layout of the spatial driving mechanism of the aileron for a glider or a motorplane to be performed in a systematic manner. In particular, a prescribed input-output behavior of the mechanism can be realized by variation of individual parameters of the spatial four-bar mechanisms which constitute the entire driving mechanism. By means of a sensitivity analysis, a systematic choice of parameters is possible. At the same time the forces acting in the mechanism can be limited by imposing maximum values of the forces as secondary conditions during the variation process.

Hiller, M. H.↗

The PR2D (Place, Route in 2-Dimensions) automatic layout computer program handbook

Place, Route in 2-Dimensions is a standard cell automatic layout computer program for generating large scale integrated/metal oxide semiconductor arrays. The program was utilized successfully for a number of years in both government and private sectors but until now was undocumented. The compilation, loading, and execution of the program on a Sigma V CP-V operating system is described.

Edge, T. M.↗

Second-generation X/S feedcone: Capabilities layout, and components

High power (20 kW) S and X-band transmitting systems were added to the Second Generation Common Aperture X/S Feedcone System to demonstrate X and S band uplink/downlink capabilities. Design considerations of new X band components, cone layout, and capabilities are discussed.

Withington, J. R.↗

A laser plotting system for VLSI chip layouts

One of the most time consuming facets of custom Very Large Scale Integration (VLSI) design is obtaining hardcopy plots of the mask geometries of cells and chips. The traditional method of generating these plots is to use a multicolor pen plotter. Pen plotters are inherently slow and the plotting speed increases linearly with the number of edges that must be plotted. A moderate custom chip design at the Jet Propulsion Laboratory (JPL) now consists of more than 200,000 such edges and can take as much as eight hours to plot using a pen plotter. Software is described that was written at JPL to produce similar plots using a laser printer. It is shown that, for rather small layouts, the laser printer can provide nearly instantaneous turnaround. For moderate to large chip designs, the laser printer provides a factor of five or more improvement is speed over pen plotting.

Deutsch, L. J.↗

An interactive wire-wrap board layout program

An interactive computer-graphics-based tool for specifying the placement of electronic parts on a wire-wrap circuit board is presented. Input is a data file (currently produced by a commercial logic design system) which describes the parts used and their interconnections. Output includes printed reports describing the parts and wire paths, parts counts, placement lists, board drawing, and a tape to send to the wire-wrap vendor. The program should reduce the engineer's layout time by a factor of 3 to 5 as compared to manual methods.

Schlutsmeyer, A.↗

Perceived orientation, spatial layout and the geometry of pictures

The purpose is to discuss the role of geometry in determining the perception of spatial layout and perceived orientation in pictures viewed at an angle. This discussion derives from Cutting's (1988) suggestion, based on his analysis of some of the author's data (Goldstein, 1987), that the changes in perceived orientation that occur when pictures are viewed at an angle can be explained in terms of geometrically produced changes in the picture's virtual space.

Goldstein, E. Bruce↗

A unified approach to VLSI layout automation and algorithm mapping on processor arrays

Development of software tools for designing supercomputing systems is highly complex and cost ineffective. To tackle this a special purpose PAcube silicon compiler which integrates different design levels from cell to processor arrays has been proposed. As a part of this, we present in this paper a novel methodology which unifies the problems of Layout Automation and Algorithm Mapping.

Venkateswaran, N.↗

Luminaire layout: Design and implementation

The information contained in this report was presented during the discussion regarding guidelines for PAR uniformity in greenhouses. The data shows a lighting uniformity analysis in a research greenhouse for rose production at the Cornell University campus. The luminaire layout was designed using the computer program Lumen-Micro. After implementation of the design, accurate measurements were taken in the greenhouse and the uniformity analysis for both the design and implementation were compared. A study of several supplemental lighting installations resulted in the following recommendations: include only the actual growing area in the lighting uniformity analysis; for growing areas up to 20 square meters, take four measurements per square meter; for growing areas above 20 square meters, take one measurement per square meter; use one of the uniformity criteria and frequency graphs to compare lighting uniformity amongst designs; and design for uniformity criterion of a least 0.75 and the fraction within +/- 15% of the average PAR value should be close to one.

Both, A. J.↗

Human factors issues and approaches in the spatial layout of a space station control room, including the use of virtual reality as a design analysis tool

Human Factors Engineering support was provided for the 30% design review of the late Space Station Freedom Payload Control Area (PCA). The PCA was to be the payload operations control room, analogous to the Spacelab Payload Operations Control Center (POCC). This effort began with a systematic collection and refinement of the relevant requirements driving the spatial layout of the consoles and PCA. This information was used as input for specialized human factors analytical tools and techniques in the design and design analysis activities. Design concepts and configuration options were developed and reviewed using sketches, 2-D Computer-Aided Design (CAD) drawings, and immersive Virtual Reality (VR) mockups.

Hale, Joseph P., II↗

Automation of Coordinated Planning Between Observatories: The Visual Observation Layout Tool (VOLT)

Fulfilling the promise of the era of great observatories, NASA now has more than three space-based astronomical telescopes operating in different wavebands. This situation provides astronomers with the unique opportunity of simultaneously observing a target in multiple wavebands with these observatories. Currently scheduling multiple observatories simultaneously, for coordinated observations, is highly inefficient. Coordinated observations require painstaking manual collaboration among the observatory staff at each observatory. Because they are time-consuming and expensive to schedule, observatories often limit the number of coordinated observations that can be conducted. In order to exploit new paradigms for observatory operation, the Advanced Architectures and Automation Branch of NASA's Goddard Space Flight Center has developed a tool called the Visual Observation Layout Tool (VOLT). The main objective of VOLT is to provide a visual tool to automate the planning of coordinated observations by multiple astronomical observatories. Four of NASA's space-based astronomical observatories - the Hubble Space Telescope (HST), Far Ultraviolet Spectroscopic Explorer (FUSE), Rossi X-ray Timing Explorer (RXTE) and Chandra - are enthusiastically pursuing the use of VOLT. This paper will focus on the purpose for developing VOLT, as well as the lessons learned during the infusion of VOLT into the planning and scheduling operations of these observatories.

Maks, Lori↗

Vertical Habitability Layout Studies and Neutral Buoyancy/Parabolic Flight Habitat Studies

In the Summer of 2013, the University of Maryland was selected for two projects under the NASA X-Hab 2014 program, administered by the National Space Grant Foundation: Vertical Habitability Layout Studies (XHab201406) and Neutral Buoyancy/Parabolic Flight Habitat Studies (XHab201407). This document, at the direction of the NASA Technical Monitor, comprises the final report for both of these contracts. Recognizing from the outset the mismatch between the desired scope of research activities under the contracts and the severely limited funding and duration, the University of Maryland leveraged the X-Hab support by integrating the programs into a number of academic classes throughout the 2013-2014 academic year. By far the most significant interaction was with the Department of Aerospace Engineering Senior capstone experience in spacecraft design sequence, ENAE 483/484. Throughout the academic year, 42 students in this sequence worked on both projects in conjunction with their senior project to design an artificial gravity research station in a distant lunar retrograde orbit. As part of this research project, the students worked with previously created 1-G habitats and underwater simulations to better understand habitat design from microgravity to full Earth gravity, as well as at lunar and Mars gravity levels between those two endpoints.

David L. Akin↗

The effects of the RHIC E-lenses magnetic structure layout on the proton beam trajectory

We are designing two electron lenses (E-lens) to compensate for the large beam-beam tune spread from proton-proton interactions at IP6 and IP8 in the Relativistic Heavy Ion Collider (RHIC). They will be installed in RHIC IR10. First, the layout of these two E-lenses is introduced. Then the effects of e-lenses on proton beam are discussed. For example, the transverse fields of the e-lens bending solenoids and the fringe field of the main solenoids will shift the proton beam. For the effects of the e-lens on proton beam trajectory, we calculate the transverse kicks that the proton beam receives in the electron lens via Opera at first. Then, after incorporating the simplified E-lens lattice in the RHIC lattice, we obtain the closed orbit effect with the Simtrack Code.

43 PARTICLE ACCELERATORS↗