SEARCH · Search NASA

Results for “oxidation capacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

DOE OSTI2020

A Novel Approach to Modeling Biomass Pyrolysis in a Fluidized Bed Reactor

A novel approach to simulating biomass pyrolysis in a fluidized bed of mostly inert material is presented. The bed is assumed to be externally heated, although simulation of autothermal operation with partial oxidation of the products is a future objective. Combining pyrolysis reaction kinetics developed by the CRECK Modeling Group and a previously published component properties model, material and energy balances are closed by tracking the residence time of biomass particles without regard for their exact spatial distribution. The model is used to simulate a pilot-scale fluidized bed pyrolysis process being developed at Iowa State University, and model predictions are compared with experimental results for red oak and corn stover feedstocks. The results are in general agreement, with the model typically predicting more noncondensable gas and less low-boiling liquid products. The differences are ascribed to the limitations of the kinetics model. This model provides a rigorous energy balance for fluidized bed pyrolysis processes that can be incorporated into commercial flowsheet models with the capacity for future addition of partial oxidation reactions and implementation of improved kinetics models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Oxidation of Ammonia Catalyzed by a Molecular Iron Complex: Translating Chemical Catalysis to Mediated Electrocatalysis

Abstract Ammonia is a promising candidate in the quest for sustainable, clean energy. With its capacity to serve as an energy carrier, the oxidation of ammonia opens avenues for carbon‐neutral approaches to address worldwide growing energy needs. We report the catalytic chemical oxidation of ammonia by an Earth‐abundant transition metal complex, trans ‐ [LFe II (MeCN) 2 ][PF 6 ] 2 , where L is a macrocyclic ligand bearing four N ‐heterocyclic carbene (NHC) donors. Using triarylaminium radical cations in MeCN, up to 182 turnovers of N 2 per Fe were obtained from chemical catalysis with an extremely low loading of the Fe catalyst (0.043 mM, 0.004 mol % catalyst). This chemical catalysis was successfully transitioned to mediated electrocatalysis for the oxidation of ammonia. Molecular electrocatalysis by the Fe catalyst and the mediator ( p ‐MeOC 6 H 4 ) 3 N exhibited a catalytic half‐wave potential ( E cat/2 ) of 0.18 V vs [Cp 2 Fe] +/0 in MeCN, and achieved 9.3 turnovers of N 2 at an applied potential of 0.20 V vs [Cp 2 Fe] +/0 at −20 °C in controlled‐potential electrolysis, with a Faradaic efficiency of 75 %. Based on computational results, the catalyst undergoes sequential oxidation and deprotonation steps to form [LFe IV (NH 2 ) 2 ] 2+ , and thereafter bimetallic coupling to form an N−N bond.

Liu, Liang↗

DOE OSTI2024

Oxidation of Ammonia Catalyzed by a Molecular Iron Complex: Translating Chemical Catalysis to Mediated Electrocatalysis

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Elucidating the mechanism underlying the augmented capacity of MoO 2 as an anode material in Li-ion batteries

Transition-metal oxide anode materials have been observed to possess an intriguing surplus of capacity beyond the expected values based on conversion reaction. However, the mechanisms behind this phenomenon have remained contentious and elusive. Here, this study focuses on synthesized nanosized molybdenum dioxide and its electrochemical performance as an anode material for Li-ion batteries. Our findings reveal a substantial increase in capacity upon cycling, achieving approximately 1688 mA h g -1 , nearly double the theoretical capacity, after 700 cycles at a 1C rate. To elucidate the mechanisms underlying this augmented capacity, a comprehensive analysis employing in situ and ex situ X-ray diffraction, X-ray absorption spectroscopy, scanning electron microscopy, and transmission electron microscopy was conducted at various stages of the Li-ion cell cycling. Our results indicate that no conversion reaction occurs during the initial discharge phase, with Li 2 O and Mo remaining undetected. Instead, Li 0.98 MoO 2 is generated upon lithiation. Further materials characterization employing electron energy loss spectroscopy and energy-dispersive X-ray spectroscopy on the cycled electrode suggests the potential formation of a metallic Li-rich layer at the interface of the Li-ion intercalated phase subsequent to the formation of Li 0.98 MoO 2 , contributing to the surplus Li storage. Moreover, electrochemical impedance spectroscopy coupled with ex situ SEM and TEM analyses reveals that alterations in particle size and morphology, along with changes in the solid electrolyte interphase (SEI) resistance, are instrumental in the capacity variation observed upon cycling.

25 ENERGY STORAGE↗

DOE OSTI2023

Intra-catalyst CH 4 oxidation pathways on a Pd/Al 2 O 3 /CeZrO x -based commercial catalyst and implications on NO x conversion profiles for a natural gas vehicle exhaust under lambda modulation

The performance of a three-way catalyst (TWC) in natural gas-powered vehicles is enhanced by periodic changes in air-to-fuel ratio (λ-modulation). The reaction networks and sequences inside the catalyst that facilitate such enhanced performance have not been extensively investigated. Here, this work applied intra-catalyst measurements (SpaciMS) to analyze the transient spatiotemporal gas concentrations inside a Pd-based TWC to establish relationships between CH 4 , NO x , CO and H 2 conversion pathways. Steam reforming and partial oxidation were revealed to be the main CH 4 conversion routes. The cyclic rich-lean conditions combined with the oxygen storage capacity (OSC) of the TWC generate reduced and oxidized zones that are constantly moving within the catalyst, changing the dominant chemical reactions occurring on the surface. In the reduced zones, OSC is depleted while CH 4 is converted through steam reforming and NO x is converted through reactions with H 2 , CO, and other surface-bound reducing fragments formed by CH 4 conversion. In the oxidized zones, OSC is replenished, CH 4 is converted by partial oxidation, and H 2 , CO, and NH 3 are oxidized. The length of lean-rich phases impacts the catalyst performance significantly; too short or too long of a rich or lean phase can lower the overall conversion of reactive species. An inhibition of CH 4 conversion was observed during the rich phase possibly due to CO-poisoning of active sites. The intra-catalyst measurements revealed that the catalyst consists of three distinct reaction zones and their lengths vary with modulation conditions. Various modulation frequencies, amplitudes, λ-centers, and temperatures were investigated which allowed an understanding of how these parameters affect the reaction zones and catalyst utilization. Understandings from this work can enable adaptive λ-control strategies to optimize the overall TWC performance over a range of vehicle operating conditions.

Lean-Rich cycling↗

DOE OSTI2025

Decoupling the capacity fade contributions in polymer electrolyte-based high-voltage solid-state batteries

Polymer electrolyte (PE)-based solid-state batteries (PE-SSBs) made with high-voltage cathodes are known to suffer from severe capacity fade, stemming primarily from the poor oxidative stability of most PEs under high-voltage cycling conditions. PEs also suffer from greater ion-transport limitations compared to liquid or solid electrolytes. However, often, these limitations are collectively stated to be responsible for the observed capacity fade, and it is challenging to decouple the contributions of different factors. Herein, a tunable cell fabrication platform was developed to systematically investigate and decouple the two primary capacity fade drivers (cell impedance growth and kinetic limitations), while keeping the other cell parameters constant. Three PE types with distinct transport characteristics were compared. By utilizing a voltage profile analysis method, the contribution of the cell's internal impedance growth was quantitatively decoupled from the kinetic limitations stemming from the high concentration gradient in the polymer catholyte and slow charge transfer reactions. We demonstrate that the high interfacial impedance did not necessarily correlate with the high capacity fade rate. Kinetic limitations that are not reflected by impedance measurements can play a dominant role in causing cumulative capacity decay.

Ock, Ji-young [Oak Ridge National Laboratory (ORNL↗

DOE OSTI2021

Reaction inhomogeneity coupling with metal rearrangement triggers electrochemical degradation in lithium-rich layered cathode

High-energy density lithium-rich layered oxides are among the most promising candidates for next-generation energy storage. Unfortunately, these materials suffer from severe electrochemical degradation that includes capacity loss and voltage decay during long-term cycling. Present research efforts are primarily focused on understanding voltage decay phenomena while origins for capacity degradation have been largely ignored. Here, we thoroughly investigate causes for electrochemical performance decline with an emphasis on capacity loss in the lithium-rich layered oxides, as well as reaction pathways and kinetics. Advanced synchrotron-based X-ray two-dimensional and three-dimensional imaging techniques are combined with spectroscopic and scattering techniques to spatially visualize the reactivity at multiple length-scales on lithium- and manganese-rich layered oxides. These methods provide direct evidence for inhomogeneous manganese reactivity and ionic nickel rearrangement. Coupling deactivated manganese with nickel migration provides sluggish reaction kinetics and induces serious structural instability in the material. Our findings provide new insights and further understanding of electrochemical degradation, which serve to facilitate cathode material design improvements.

25 ENERGY STORAGE↗

DOE OSTI2022

Exceptional Cycling Performance Enabled by Local Structural Rearrangements in Disordered Rocksalt Cathodes

The capacity of lithium transition-metal (TM) oxide cathodes is directly linked to the magnitude and accessibility of the redox reservoir associated with TM cations and/or oxygen anions, which traditionally decreases with cycling as a result of chemical, structural, or mechanical fatigue. Here, it is shown that a capacity increase over 125% can be achieved upon cycling of high-energy Mn- and F-rich cation-disordered rocksalt oxyfluoride cathodes. This study reveals that in Li 1.2 Mn 0.7 Nb 0.1 O 1.8 F 0.2 , repeated Li extraction/reinsertion utilizing Mn 3+ /Mn 4+ redox along with some degree of O-redox participation leads to local structural rearrangements and formation of domains with off-stoichiometry spinel-like features. The effective integration of these local “structure-domains” within the cubic disordered rocksalt framework promotes better Li diffusion and improves material utilization, consequently increased capacity upon cycling. Finally, this study provides important new insights into materials design strategies to further exploit the rich compositional and structural space of Mn chemistry for developing sustainable, high-energy cathode materials.

25 ENERGY STORAGE↗

DOE OSTI2022

Unconventional Photoconversion from In‐Plane 2D Heterostructures of 2D Transition Metal Carbides/Semiconductors

2D transition metal carbides/nitrides (MXenes) are thought of promising photothermal materials due to their broadband localized surface plasma resonance (LSPR) and attractive electromagnetic interference (EMI) properties. However, the weak oxidation resistance and unclear photothermal mechanism of MXenes impede their photothermal modulations. Herein, the in‐plane 2D Ti 3 C 2 /TiO 2 heterostructures are fabricated by partial oxidation and an unconventional photothermal effect under near infrared irradiation, even if the oxidation compromises the EMI and LSPR capacities, is demonstrated. Such performance is ascribed to the faster transfer of photoexcited electrons across the seamless in‐plane Ti 3 C 2 /TiO 2 heterointerface than the reported out‐of‐plane one, and the 1–2 orders of magnitude faster relaxation processes of electrons than the ground bleaching in the Original MXene. These experimental results are well‐supported by theoretical calculations. The conceptual advances broaden the fundamental understanding of the photoconversion of MXenes, which would be extended into a variety of applications, such as biomedical therapy, photosynthesis, and photovoltaics.

Energy & Fuels↗

DOE OSTI2021

Reversible function switching of Ag catalyst in Mg/S battery with chloride-containing electrolyte

Rechargeable Mg/S batteries suffer from fast capacity decay because of the difficult re-oxidation of MgS. To tackle this problem, we used Ag catalyst in Mg/S cells with Cl- containing electrolyte, and achieved a greatly improved specific capacity of ~1200 mAh•g -1 and a long cycling life of 100 cycles. To understand the mechanism behind this improvement, we employed in-situ synchrotron radiation X-ray diffraction and in-situ X-ray absorption spectroscopy tools to study the reversible phase transitions during charge/discharge cycling. Additionally, the in-situ experiment results revealed that, at deeply charged state, Ag reacted with Cl- in the electrolyte to form the AgCl interfacial layer which prevented the physical contact of Ag with elemental S and avoided the formation of Ag 2 S; at early discharged state, AgCl transformed back to metallic Ag, which guaranteed its catalytic effectiveness for MgS decomposition. This reversible function switching mechanism of Ag catalyst is completely different from that in Mg/S cells using other catalysts or electrolytes.

25 ENERGY STORAGE↗

DOE OSTI2020

Structural Distortion Induced by Manganese Activation in a Lithium-Rich Layered Cathode

The search for batteries with high energy density has highlighted lithium-rich manganese-based layered oxides due to their exceptionally high capacity. Although it is clear that both cationic and anionic redox are present in the charge compensation mechanism, the microstructural evolution of the Li 2 MnO 3 -like phase during anionic redox and its role in battery performance and structural stability are still not fully understood. Here, we systematically probe microstructural evolution using spatially resolved synchrotron X-ray measurements and reveal an underlying interaction between the Li 2 MnO 3 -like domains and bulk rhombohedral structure. Mn ion activation and a previously unobserved structural distortion are discovered at high voltages, and can be related to structural strain present in the Li 2 MnO 3 -like phase upon substantial lithium ion extraction. Moreover, we elucidate a correlation between this structural distortion and irreversible phase transitions by thermally perturbing delithiated samples. These insights highlight a pathway toward achieving high capacity cathode materials required for future commercial applications.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Improving the oxygen redox reversibility of Li-rich battery cathode materials via Coulombic repulsive interactions strategy

The oxygen redox reaction in lithium-rich layered oxide battery cathode materials generates extra capacity at high cell voltages (i.e., >4.5 V). However, the irreversible oxygen release causes transition metal (TM) dissolution, migration and cell voltage decay. To circumvent these issues, we introduce a strategy for tuning the Coulombic interactions in a model Li-rich positive electrode active material, i.e., Li 1.2 Mn 0.6 Ni 0.2 O 2 . In particular, we tune the Coulombic repulsive interactions to obtain an adaptable crystal structure that enables the reversible distortion of TMO 6 octahedron and mitigates TM dissolution and migration. Moreover, this strategy hinders the irreversible release of oxygen and other parasitic reactions (e.g., electrolyte decomposition) commonly occurring at high voltages. When tested in non-aqueous coin cell configuration, the modified Li-rich cathode material, combined with a Li metal anode, enables a stable cell discharge capacity of about 240 mAh g -1 for 120 cycles at 50 mA g -1 and a slower voltage decay compared to the unmodified Li 1.2 Mn 0.6 Ni 0.2 O 2 .

25 ENERGY STORAGE↗

DOE OSTI2025

Delineating the impact of Ti/Mg substitution in P2-type Na 2/3 Ni 1/3 Mn 2/3 O 2 with an advanced electrolyte for sodium-ion batteries

Sodium layered oxide cathodes are drawing interest globally as a potential alternative to lithium layered oxides, but they suffer from egregious capacity fade and have intrinsically lower capacity. P2-type Na 2/3 Ni 1/3 Mn 2/3 O 2 is a particularly relevant cathode material as it demonstrates an energy density of up to 550 W h kg −1 at high operating potentials, although this can only be maintained for a handful of cycles with industrial electrolytes. Here, a localized saturated electrolyte (LSE) is shown to significantly improve the cycle life of Na 2/3 Ni 1/3 Mn 2/3 O 2 by suppressing the surface reactivity, despite large volume changes during cycling. The demonstrated influence of surface stability on cycle life in this work challenges the prevailing notion of a popular capacity stabilization strategy with titanium/magnesium co-doping, which is primarily thought to improve cycle life via improved structural stability. Single crystals of Na 2/3 Ni 1/3−x Mg x Mn 2/3−2x Ti 2x O 2 (x = 0, 1/48, 1/24, 1/12) materials are cycled with a traditional electrolyte and the LSE to demonstrate that despite eliminating the phase transition with dopants in Na 2/3 Ni 1/4 Mg 1/12 Mn 1/2 Ti 1/6 O 2 , the predominant role of the dopants is in reducing the parasitic oxygen reactivity at the cathode surface. The different roles these dopants play are systematically disambiguated, and this work can guide future research to focus on reducing the parasitic cathode/electrolyte reactivity further.

25 ENERGY STORAGE↗

DOE OSTI2021

Modeling, Design, and Testing of a Novel Biphasic Solvent-Enabled Absorption System for Post-Combustion Carbon Capture

A novel absorption process enabled by a new class of biphasic solvents for post-combustion carbon capture (BiCAP) is presently being developed at the University of Illinois at Urbana-Champaign. The new biphasic solvents are water-lean solvent blends that develop dual liquid phases with the absorbed CO2 highly enriched in one of the phases. These solvents are superior in CO2 capacity and have high thermal and oxidative stability compared to MEA. The BiCAP technology features a unique process configuration of multi-stage CO2 absorption and liquid–liquid phase separation during CO2 absorption, allowing continual separation and removal of the CO2-enriched liquid phase for maintaining low solvent viscosity and a fast absorption rate. A 40 kWe-scale skid has recently been constructed at the Abbott Power Plant in Champaign, IL, to test the BiCAP solvent in continuous operation with a slipstream of real post-combustion flue gas. Along with improvements in the stripping configuration including cold feed bypass, the process is expected to achieve a minimum reboiler duty of 2,210 kJ/kg CO2 captured at a stripper operating pressure of 6 bar.

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2020

Probing Depth-Dependent Transition-Metal Redox of Lithium Nickel, Manganese, and Cobalt Oxides in Li-Ion Batteries

Layered lithium nickel, manganese, and cobalt oxides (NMC) are among the most promising commercial positive electrodes in the past decades. Understanding the detailed surface and bulk redox processes of Ni-rich NMC can provide useful insights into material design options to boost reversible capacity and cycle life. Both hard X-ray absorption (XAS) of metal K-edges and soft XAS of metal L-edges collected from charged LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) showed that the charge capacity up to removing ~0.7 Li/f.u. was accompanied with Ni oxidation in bulk and near the surface (up to 100 nm). Of significance to note is that nickel oxidation is primarily responsible for the charge capacity of NMC622 and 811 up to similar lithium removal (~0.7 Li/f.u.) albeit charged to different potentials, beyond which was followed by Ni reduction near the surface (up to 100 nm) due to oxygen release and electrolyte parasitic reactions. Overall, this observation points toward several new strategies to enhance reversible redox capacities of Ni-rich and/or Co-free electrodes for high-energy Li-ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2025

Designing Advanced Electrolytes for High-Voltage High-Capacity Disordered Rocksalt Cathodes

Lithium (Li)-excess transition metal oxide materials which crystallize in the cation-disordered rock salt (DRX) structure are promising cathodes for realizing low-cost, high-energy-density Li batteries. However, the state-of-the-art electrolytes for Li-ion batteries cannot meet the high-voltage stability requirement for high-voltage DRX cathodes, thus new electrolytes are urgently demanded. It has been reported that the solvation structures and properties of the electrolytes critically influence the performance and stability of the batteries. In this study, the structure–property relationships of various electrolytes with different solvent-to-diluent ratios are systematically investigated through a combination of theoretical calculations and experimental tests and analyses. This approach guides the development of electrolytes with unique solvation structures and characteristics, exhibiting high voltage stability, and enhancing the formation of stable electrode/electrolyte interphases. These electrolytes enable the realization of Li||Li 1.094 Mn 0.676 Ti 0.228 O 2 (LMTO) DRX cells with improved performance compared to the conventional electrolyte. Specifically, Li||LMTO cells with the optimized advanced controlled-solvation electrolyte deliver higher specific capacity and longer cycle life compared to cells with the conventional electrolyte. Additionally, the investigation into the structure–property relationship provides a foundational basis for designing advanced electrolytes, which are crucial for the stable cycling of emerging high-voltage cathodes.

25 ENERGY STORAGE↗

DOE OSTI2022

Solvent-Free Manufacturing of Lithium-Ion Battery Electrodes via Cold Plasma

Slurry casting has been used to fabricate lithium-ion battery electrodes for decades, which involves toxic and expensive organic solvents followed by high-cost vacuum drying and electrode calendering. This work presents a new manufacturing method using a nonthermal plasma to create inter-particle binding without using any polymeric binding materials, enabling solvent-free manufacturing electrodes with any electrochemistry of choice. The cold-plasma-coating technique enables fabricating electrodes with thickness (>200 μm), high mass loading (>30 mg cm -2 ), high peel strength, and the ability to print lithium-ion batteries in an arbitrary geometry. This crosscutting, chemistry agnostic, platform technology would increase energy density, eliminate the use of solvents, vacuum drying, and calendering processes during production, and reduce manufacturing cost for current and future cell designs. Here, lithium iron phosphate and lithium cobalt oxide were used as examples to demonstrate the efficacy of the cold-plasma-coating technique. It is found that the mechanical peel strength of cold-plasma-coating-manufactured lithium iron phosphate is over an order of magnitude higher than that of slurry-casted lithium iron phosphate electrodes. Full cells assembled with a graphite anode and the cold-plasma-coating-lithium iron phosphate cathode offer highly reversible cycling performance with a capacity retention of 81.6% over 500 cycles. For the highly conductive cathode material lithium cobalt oxide, an areal capacity of 4.2 mAh cm -2 at 0.2 C is attained. We anticipate that this new, highly scalable manufacturing technique will redefine global lithium-ion battery manufacturing providing significantly reduced plant footprints and material costs.

25 ENERGY STORAGE↗

DOE OSTI2023

Fine-Tuning of Pt Dispersion on Al 2 O 3 and Understanding the Nature of Active Pt Sites for Efficient CO and NH 3 Oxidation Reactions

Fine-tuning the dispersion of active metal species on widely used supports is a research hotspot in the catalysis community, which is vital for achieving a balance between the atomic utilization efficiency and the intrinsic activity of active sites. In this work, using bayerite Al(OH) 3 as support directly or after precalcination at 200 or 550 °C, Pt/Al 2 O 3 catalysts with distinct Pt dispersions from single atoms to clusters (ca. 2 nm) were prepared and evaluated for CO and NH 3 removal. Richer surface hydroxyl groups on AlO x (OH) y support were proved to better facilitate the dispersion of Pt. However, Pt/Al 2 O 3 with relatively lower Pt dispersion could exhibit better activity in CO/NH 3 oxidation reactions. Further reaction mechanism study revealed that the Pt sites on Pt/Al 2 O 3 with lower Pt dispersion could be activated to Pt 0 species much easier under the CO oxidation condition, on which a higher CO adsorption capacity and more efficient O 2 activation were achieved simultaneously. Compared to Pt single atoms, PtO x clusters could also better activate NH 3 into –NH 2 and –HNO species. The higher CO adsorption capacity and the more efficient NH 3 /O 2 activation ability on Pt/Al 2 O 3 with relatively lower Pt dispersion well explained its higher CO/NH 3 oxidation activity. This study emphasizes the importance of avoiding a singular pursuit of single-atom catalyst synthesis and instead focusing on achieving the most effective Pt species on Al 2 O 3 support for targeted reactions. Finally, this approach avoids unnecessary limitations and enables a more practical and efficient strategy for Pt catalyst fabrication in emission control applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗