Search NASA⌕ Search

SEARCH · Search NASA

Results for “robot arm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A testbed for a unified teleoperated-autonomous dual-arm robotic system

This paper describes a complete robot control facility built at the Jet Propulsion Laboratory as part of NASA a telerobotics program to develop a state-of-the-art robot control environment for laboratory based space-like experiments. This system, which is now fully operational, has the following features: separation of the computing facilities into local and remote sites, autonomous motion generation in joint or Cartesian coordinates, dual-arm force reflecting teleoperation with voice interaction between the operator and the robots, shared control between the autonomously generated motions and operator controlled teleoperation, and dual-arm coordinated trajectory generation. The system has been used to carry out realistic experiments such as the exchange of an Orbital Replacement Unit (ORU), bolt turning, and door opening, using a mixture of autonomous actions and teleoperation, with either a single arm or two cooperating arms.

Hayati, S.↗
NASA NTRS1988

Force control of a multi-arm robot system

A force-compensated control method for multiple manipulators is presented that allows coordinated manipulation of a jointly grasped object. In this scheme, each arm independently carries out the motions required to realize the desired motion of a prescribed point on the manipulated object. The approach has been implemented and demonstrated on a laboratory system consisting of two industrial, computer-controller manipulators.

Alberts, Thomas E.↗
NASA NTRS1989

Optimal force distribution for payload positioning using a planar dual-arm robot

This paper presents a parameter optimization technique for deciding the force distribution on a payload being transported along a predetermined trajectory using two planar manipulator arms. The methodology begins by transforming the singular dynamics of two-arm transport to an ordinary set of differential equations and then proceeds to obtain a relation between the torques exerted by each arm. This relation is then used in a quadratic torque cost which is subsequently minimized to yield an optimal torque distribution. Significant savings in energy were found to occur when the arms were allowed to interact by transmission of forces through the payload. Even more significant are the savings found over one-arm transport of payloads where the arm torques are fixed by the prescribed trajectory.

Carignan, C. R.↗
NASA NTRS1993

Parametric motion control of robotic arms: A biologically based approach using neural networks

A neural network based system is presented which is able to generate point-to-point movements of robotic manipulators. The foundation of this approach is the use of prototypical control torque signals which are defined by a set of parameters. The parameter set is used for scaling and shaping of these prototypical torque signals to effect a desired outcome of the system. This approach is based on neurophysiological findings that the central nervous system stores generalized cognitive representations of movements called synergies, schemas, or motor programs. It has been proposed that these motor programs may be stored as torque-time functions in central pattern generators which can be scaled with appropriate time and magnitude parameters. The central pattern generators use these parameters to generate stereotypical torque-time profiles, which are then sent to the joint actuators. Hence, only a small number of parameters need to be determined for each point-to-point movement instead of the entire torque-time trajectory. This same principle is implemented for controlling the joint torques of robotic manipulators where a neural network is used to identify the relationship between the task requirements and the torque parameters. Movements are specified by the initial robot position in joint coordinates and the desired final end-effector position in Cartesian coordinates. This information is provided to the neural network which calculates six torque parameters for a two-link system. The prototypical torque profiles (one per joint) are then scaled by those parameters. After appropriate training of the network, our parametric control design allowed the reproduction of a trained set of movements with relatively high accuracy, and the production of previously untrained movements with comparable accuracy. We conclude that our approach was successful in discriminating between trained movements and in generalizing to untrained movements.

Bock, O.↗
NASA NTRS1991

Synchronized computational architecture for generalized bilateral control of robot arms

A master six degree of freedom Force Reflecting Hand Controller (FRHC) is available at a master site where a received image displays, in essentially real time, a remote robotic manipulator which is being controlled in the corresponding six degree freedom by command signals which are transmitted to the remote site in accordance with the movement of the FRHC at the master site. Software is user-initiated at the master site in order to establish the basic system conditions, and then a physical movement of the FRHC in Cartesean space is reflected at the master site by six absolute numbers that are sensed, translated and computed as a difference signal relative to the earlier position. The change in position is then transmitted in that differential signal form over a high speed synchronized bilateral communication channel which simultaneously returns robot-sensed response information to the master site as forces applied to the FRHC so that the FRHC reflects the feel of what is taking place at the remote site. A system wide clock rate is selected at a sufficiently high rate that the operator at the master site experiences the Force Reflecting operation in real time.

Szakaly, Zoltan F.↗
NASA NTRS1988

Detecting and avoiding collisions between two robot arms in a common workspace

A novel approach to collision detection is presented and methods of avoiding collisions are discussed. Collisions are assumed to be between the wrists of two robots (which correspond to the upper three links of PUMA manipulators). A sphere model for the wrist is employed because it is rotationally invariant and computationally efficient. The collision detection algorithm involves obtaining the potential collision path segments along the straight line trajectories without considering the motion characteristics, and mapping the potential collision segment information into the time domain to obtain the space-time collisions.

Basta, Robert A.↗
NASA NTRS1987

Kalman filtering, smoothing, and recursive robot arm forward and inverse dynamics

The recursive difference equations of Kalman filtering and Bryson-Frazier fixed time-interval smoothing, arising in the state estimation theory for linear state space systems, are used here to solve problems of serial manipulator inverse and forward dynamics. The configuration analyzed is that of a joint connected N-link serial manipulator attached to an immobile base. The equivalence between the filtering and smoothing techniques from state estimation theory and recursive robot dynamics methods is demonstrated. Several areas for future research are suggested.

Rodriguez, Guillermo↗
NASA NTRS1998

Robotic Arm Actuated by Electroactie Polymers

Actuators are used for many planetary and space applications. To meet the NASA goal to reduce the actuators size, mass, cost and power consumption, electroactie polymers (EAP) are being developed to induce large bending and longitudinal actuation strains.

Robotics electroactive polymers hand simulation ac↗
NASA NTRS1989

Method and apparatus for hybrid position/force control of multi-arm cooperating robots

Two or more robotic arms having end effectors rigidly attached to an object to be moved are disclosed. A hybrid position/force control system is provided for driving each of the robotic arms. The object to be moved is represented as having a total mass that consists of the actual mass of the object to be moved plus the mass of the moveable arms that are rigidly attached to the moveable object. The arms are driven in a positive way by the hybrid control system to assure that each arm shares in the position/force applied to the object. The burden of actuation is shared by each arm in a non-conflicting way as the arm independently control the position of, and force upon, a designated point on the object.

Hayati, Samad A.↗
NASA NTRS1986

Kalman filtering, smoothing and recursive robot arm forward and inverse dynamics

The inverse and forward dynamics problems for multi-link serial manipulators are solved by using recursive techniques from linear filtering and smoothing theory. The pivotal step is to cast the system dynamics and kinematics as a two-point boundary-value problem. Solution of this problem leads to filtering and smoothing techniques identical to the equations of Kalman filtering and Bryson-Frazier fixed time-interval smoothing. The solutions prescribe an inward filtering recursion to compute a sequence of constraint moments and forces followed by an outward recursion to determine a corresponding sequence of angular and linear accelerations. In addition to providing techniques to compute joint accelerations from applied joint moments (and vice versa), the report provides an approach to evaluate recursively the composite multi-link system inertia matrix and its inverse. The report lays the foundation for the potential use of filtering and smoothing techniques in robot inverse and forward dynamics and in robot control design.

Rodriguez, G.↗
DOE OSTI2020

Long Reach Robotic Arm

Explore the source record for details and available documents.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Successful Cleanroom Installation of PIP-II SSR2 Coupler Using Robotic Arm

The Fermilab Side-Coupled Linac accelerates H- beam from 116 MeV to 400 MeV through seven 805 MHz modules. Twelve wire scanners are present in the Side Coupled Linac and four are present in the transfer line between the Linac and the Booster synchrotron ring. These wire scanners act as important diagnostic instruments to directly collect information on the beam s transverse distribution. The manipulation of the conditions of wire scanner data collection enables further characterization of the beamline, such as calculating emittance and the Twiss parameters of the beam at select regions. Here we present the results of these studies and characterization of the non-Gaussian transverse beam distribution observed.

Narug, C.↗