Search NASA⌕ Search

SEARCH · Search NASA

Results for “tracking code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Codes and modalities in multiple resources - A success and a qualification

The relevance of codes and modalities in a multiple-resource model to the prediction of task interference was investigated in an experiment in which either verbal or spatial decision tasks, responded to with either voice or key press, were time-shared with second-order tracking. Results indicate the importance of the dichotomy between verbal and spatial processing codes in accounting for task interference. Interference with tracking was consistently greater, and difficulty/performance trade-offs were stronger, when the spatial decision task was performed and the manual response was used. A review of the literature on the interference between a continuous visual task and a discrete task whose modality is either auditory or visual suggests that scanning produces a dominant cost to intramodal configurations when visual channels are separated in space. In absence of visual separation, the differences between cross-modal and intramodal performance may be best accounted for by a mechanism of preemption.

Wickens, Christopher D.↗

Software manual for operating particle displacement tracking data acquisition and reduction system

The software manual is presented. The necessary steps required to record, analyze, and reduce Particle Image Velocimetry (PIV) data using the Particle Displacement Tracking (PDT) technique are described. The new PDT system is an all electronic technique employing a CCD video camera and a large memory buffer frame-grabber board to record low velocity (less than or equal to 20 cm/s) flows. Using a simple encoding scheme, a time sequence of single exposure images are time coded into a single image and then processed to track particle displacements and determine 2-D velocity vectors. All the PDT data acquisition, analysis, and data reduction software is written to run on an 80386 PC.

Wernet, Mark P.↗

Galileo probe relay receiver

For the Jovian mission, the data link from the Galileo probe to the orbiter uses suppressed-carrier Manchester encoded BPSK modulation and is protected with R = 1/2, K = 7 convolutional coding. The receiver closes the link by acquiring, tracking, and demodulating the data. It has to operate in a highly stressed environment with severe frequency offset, frequency rate, wind gust, and antenna spin conditions. Salient features are described and breadboard test data presented.

Prouty, D. A.↗

Track structure model of cell damage in space flight

The phenomenological track-structure model of cell damage is discussed. A description of the application of the track-structure model with the NASA Langley transport code for laboratory and space radiation is given. Comparisons to experimental results for cell survival during exposure to monoenergetic, heavy-ion beams are made. The model is also applied to predict cell damage rates and relative biological effectiveness for deep-space exposures.

Katz, Robert↗

The experiment of CCSDS packet telemetry using a highly elliptical orbit satellite 'Hiten'

This paper describes the outline of the telemetry scheme proposed by the Consultative Committee of Space Data Systems (CCSDS), and the on-orbit experiment which was carried out to show the applicability of the CCSDS packet telemetry scheme using the Japan's satellite Hiten in a highly elliptical orbit. The telemetry data which are generated by the instruments are packetized in Hiten and reformed to the original data in earth stations successfully. The experimental results showed that the standardized scheme is helpful in allowing for tracking cross support between organizations, and the concatenated code is quite effective to transmit data in a low C/N condition.

Takano, Tadashi↗

Communications, Signal Processing, and Telemetering Research Program Review

A Communications, Signal Processing, and Telemetering Research Program Review was held on February 23, 1999. Research conducted under the grant was presented and reviewed, for progress, and for possible technology transfers. The research reviewed was in the following areas: (1) Bandwidth-efficient Modulation and nonlinear equalization; (2) Investigation of an architecture for parallel signal processing applicable to communications problems; (3)Coded partial response over satellites; (4) synchronization at Low SNR; (5) Serial concatenated convolutional codes and some implementation issues on high rate turbo codes; (6) Flight experiments; (7) Real time doppler tracking; (8) Space protocol testing; (9) Lightweight optical communications without carrying a laser in space. The presentations are given by the graduate students who performed the research.

Source record↗

Less-Complex Method of Classifying MPSK

An alternative to an optimal method of automated classification of signals modulated with M-ary phase-shift-keying (M-ary PSK or MPSK) has been derived. The alternative method is approximate, but it offers nearly optimal performance and entails much less complexity, which translates to much less computation time. Modulation classification is becoming increasingly important in radio-communication systems that utilize multiple data modulation schemes and include software-defined or software-controlled receivers. Such a receiver may "know" little a priori about an incoming signal but may be required to correctly classify its data rate, modulation type, and forward error-correction code before properly configuring itself to acquire and track the symbol timing, carrier frequency, and phase, and ultimately produce decoded bits. Modulation classification has long been an important component of military interception of initially unknown radio signals transmitted by adversaries. Modulation classification may also be useful for enabling cellular telephones to automatically recognize different signal types and configure themselves accordingly. The concept of modulation classification as outlined in the preceding paragraph is quite general. However, at the present early stage of development, and for the purpose of describing the present alternative method, the term "modulation classification" or simply "classification" signifies, more specifically, a distinction between M-ary and M'-ary PSK, where M and M' represent two different integer multiples of 2. Both the prior optimal method and the present alternative method require the acquisition of magnitude and phase values of a number (N) of consecutive baseband samples of the incoming signal + noise. The prior optimal method is based on a maximum- likelihood (ML) classification rule that requires a calculation of likelihood functions for the M and M' hypotheses: Each likelihood function is an integral, over a full cycle of carrier phase, of a complicated sum of functions of the baseband sample values, the carrier phase, the carrier-signal and noise magnitudes, and M or M'. Then the likelihood ratio, defined as the ratio between the likelihood functions, is computed, leading to the choice of whichever hypothesis - M or M'- is more likely. In the alternative method, the integral in each likelihood function is approximated by a sum over values of the integrand sampled at a number, 1, of equally spaced values of carrier phase. Used in this way, 1 is a parameter that can be adjusted to trade computational complexity against the probability of misclassification. In the limit as 1 approaches infinity, one obtains the integral form of the likelihood function and thus recovers the ML classification. The present approximate method has been tested in comparison with the ML method by means of computational simulations. The results of the simulations have shown that the performance (as quantified by probability of misclassification) of the approximate method is nearly indistinguishable from that of the ML method (see figure).

Hamkins, Jon↗

Step-by-Step Simulation of Radiation Chemistry Using Green Functions for Diffusion-Influenced Reactions

Radiolytic species are formed approximately 1 ps after the passage of ionizing radiation through matter. After their formation, they diffuse and chemically react with other radiolytic species and neighboring biological molecules, leading to various oxidative damage. Therefore, the simulation of radiation chemistry is of considerable importance to understand how radiolytic species damage biological molecules [1]. The step-by-step simulation of chemical reactions is difficult, because the radiolytic species are distributed non-homogeneously in the medium. Consequently, computational approaches based on Green functions for diffusion-influenced reactions should be used [2]. Recently, Green functions for more complex type of reactions have been published [3-4]. We have developed exact random variate generators of these Green functions [5], which will allow us to use them in radiation chemistry codes. Moreover, simulating chemistry using the Green functions is which is computationally very demanding, because the probabilities of reactions between each pair of particles should be evaluated at each timestep [2]. This kind of problem is well adapted for General Purpose Graphic Processing Units (GPGPU), which can handle a large number of similar calculations simultaneously. These new developments will allow us to include more complex reactions in chemistry codes, and to improve the calculation time. This code should be of importance to link radiation track structure simulations and DNA damage models.

Plante, Ianik↗

Convolutional code performance in the Rician fading channel

The performance of short constraint length convolutional codes in conjunction with binary phase-shift keyed (BPSK) modulation and Viterbi maximum likelihood decoding on the classical Rician fading channel is examined in detail. Primary interest is in the bit error probability performance as a function of E sub b/N sub 0 parameterized by the fading channel parameters. Fairly general upper bounds on bit error probability performance in the presence of fading are obtained and compared with simulation results in the two extremes of zero channel memory and infinite channel memory. The efficacy of simple block interleaving in combating the memory of the channel is thoroughly explored. Results include the effects of fading on tracking loop performance and the subsequent impact on overall coded system performance. The approach is analytical where possible; otherwise resort is made to digital computer simulation.

Modestino, J. W.↗

Combining Sparsity DEM Inversions with Event Tracking for AIA Data

We introduce a modified version of the ASGARD code (Automated Selection and Grouping of events in A/A Regional Data). Originally written to detect and group brightenings ("events") in the AIA EUV channels, it now includes the sparsity DEM inversion method and instead detects emission measure enhancements in different temperature bins. Ultimately, the goal is to automatically determine heating and cooling rates in different coronal structures.

Bethge, Christian↗

CFD-Assisted Nodal Modeling of Sloshing in a Cryogenic Propellant Tank

During autogenous pressurization, tank sloshing causes a significant increase in pressurant consumption to maintain constant ullage pressure during draining of the tank. This increase in pressurant consumption is caused by a significant increase in condensation at the liquid-vapor interface. Sloshing strongly affects the liquid side heat transfer coefficient and thereby the condensation rate. Traditionally, sloshing is modeled by CFD code using the VOF (Volume of Fluid) method to track the liquid vapor interface during sloshing. CFD calculations require a very fine grid to accurately compute the heat and mass transfer at the interface. Therefore, computations are time consuming and prohibit performing many parametric studies often needed during the design of a new system. This paper describes an alternative approach by developing a CFD-assisted nodal model to predict system parameters more economically with reasonable accuracy. In this approach, a multi-node model of tank pressurization was developed using GFSSP. A multi-node model was needed to account for stratification. The model computes heat and mass transfer at the interface to calculate the condensation rate. The liquid side heat transfer is computed using the parameters of sloshing dynamics such as frequency, wave amplitude, and interface area. The parameters of sloshing dynamics are computed by the CFD code LOCI-Stream. The model predictions were compared with test data for several cases.

Cryogenic Tank Sloshing↗

Simulation of Radiation-Induced DNA Damage With the Code RITRACKS

INTRODUCTION DNA damage is one of the most physiologically important effects of ionizing radiation. Clustered DNA damage events, like double-strand breaks (DSBs), have the most notable biological consequences. DNA damage types depend on both the track structure of the radiation and the spatial organization of the DNA. High linear energy transfer (LET) charged nuclei, found in galactic cosmic rays (GCR), are known to produce large numbers of complex DNA damage events. The human genome is packaged into chromatin, which can take on locus-dependent and cell type-dependent spatial conformations that correspond to epigenetic states, such as more open, extended structures in transcriptionally active chromatin. These epigenetic differences can affect DNA break patterns in response to ionizing radiation, potentially creating distinct DNA repair and signaling outcomes across the genome in different cells. MATERIAL AND METHODS The code RITRACKS (Relativistic Ion Tracks), which simulates stochastic radiation track structures and radiation chemistry, was used to model damage on isolated and histone-bound DNA by various types of ions and photons. The changes made to the code to perform radiation-induced DNA damage, and simulation results on single nucleosomes are given in our recent paper. In this work, the DNA building capabilities of RITRACKS have been extended to simulate more complex DNA structures build on the coarse-grain simulation framework meso-WLCsim. This code can sample generic chromatin fiber conformation ensembles based on the geometry of nucleosomes and mechanical properties of DNA. Using RITRACKS, we simulated the fragment length distributions (FLD) of irradiated DNA structures built using the chromatin conformations of WLCsim and obtained results representative of those obtained with Radiation-Induced Correlated Cleavage with sequencing (RICC-Seq) experiments [6]. We have also performed Fe ion and photon irradiations of K562, IMR90, BJ and RPE-1 cells at NSRL to experimentally validate results. Sample processing and data analysis are in progress and any available preliminary results will be discussed. DISCUSSION The recent updates in the code RITRACKS allow the calculation of several quantities such as the DNA damage yield and the FLD. This approach can be used to model epigenetic state-specific chromatin structure parameters to leverage the epigenetic state data available for many human cell types to infer relative DNA damage sensitivity among genomic loci.

I Plante↗

Minimal Power Latch for Single-Slope ADCs

Column-parallel analog-to-digital converters (ADCs) for imagers involve simultaneous operation of many ADCs. Single-slope ADCs are well adapted to this use because of their simplicity. Each ADC contains a comparator, comparing its input signal level to an increasing reference signal (ramp). When the ramp is equal to the input, the comparator triggers a latch that captures an encoded counter value (code). Knowing the captured code, the ramp value and hence the input signal are determined. In a column-parallel ADC, each column contains only the comparator and the latches; the ramp and code generation are shared. In conventional latch or flip-flop circuits, there is an input stage that tracks the input signal, and this stage consumes switching current every time the input changes. With many columns, many bits, and high code rates, this switching current can be substantial. It will also generate noise that may corrupt the analog signals. A latch was designed that does not track the input, and consumes power only at the instant of latching the data value. The circuit consists of two S-R (set-reset) latches, gated by the comparator. One is set by high data values and the other by low data values. The latches are cross-coupled so that the first one to set blocks the other. In order that the input data not need an inversion, which would consume power, the two latches are made in complementary polarity. This requires complementary gates from the comparator, instead of complementary data values, but the comparator only triggers once per conversion, and usually has complementary outputs to begin with. An efficient CMOS (complementary metal oxide semiconductor) implementation of this circuit is shown in the figure, where C is the comparator output, D is the data (code), and Q0 and Q1 are the outputs indicating the capture of a zero or one value. The latch for Q0 has a negative-true set signal and output, and is implemented using OR-AND-INVERT logic, while the latch for Q1 uses positive- true signals and is implemented using AND-OR-INVERT logic. In this implementation, both latches are cleared when the comparator is reset. Two redundant transistors are removed from the reset side of each latch, making for a compact layout. CMOS imagers with column-parallel ADCs have demonstrated high performance for remote sensing applications. With this latch circuit, the power consumption and noise can be further reduced. This innovation can be used in CMOS imagers and very-low-power electronics

Hancock, Bruce R.↗

Results from the GPS Flight Experiment on the High Earth Orbit AMSAT OSCAR-40 Spacecraft

A GPS receiver flying on the High Earth Orbit (HEO) AMSAT-OSCAR 40 (AO-40) spacecraft has been returning GPS observations from high above the altitude of the GPS constellation. AO-40, an amateur radio satellite launched November 16, 2000, is currently in a low inclination, 1000 by 59000 lan altitude orbit. This low-cost experiment utilizes a mid 1990's era, 6-channel, CIA code receiver configured with high gain receiving antennas for tracking above the GPS constellation. The receiver has performed well, despite operating significantly outside of its original design environment. It has regularly returned GPS observations from points all around the orbit, with over ten weeks of GPS tracking data collected to date. Signal to noise levels as high as 48 B-Hz have been recorded near apogee, when the spacecraft was at an altitude of close to 60000 km. GPS side lobe signals have been tracked on several occasions, primarily from Block IIR GPS satellites. Although the receiver has not computed a solution in real-time, point solutions have been computed on the ground using simultaneous measurements from four satellites. This experiment has provided important experience dealing with the many challenges inherent to GPS tracking at high altitudes, and the measurements returned are providing valuable information about the characteristics of GPS signals available for future HE0 users.

Bauer, Frank↗

Optical space communications at JPL

Subsytem and system level technology development at JPL for free-space laser communications from both deep space and near Earth is described. These include acquisition, tracking, and pointing, laser transmitters, photon-counting receivers, coding, modulation, and communication systems.

laser transmitter↗

flexplan: Mission Planning System for the Lunar Reconnaissance Orbiter

flexplan is a mission planning and scheduling (MPS) tool that uses soft algorithms to define mission scheduling rules and constraints. This allows the operator to configure the tool for any mission without the need to modify or recompile code. In addition, flexplan uses an ID system to track every output on the schedule to the input from which it was generated. This allows flexplan to receive feedback as the schedules are executed, and update the status of all activities in a Web-based client. flexplan outputs include various planning reports, stored command loads for the Lunar Reconnaissance Orbiter (LRO), ephemeris loads, and pass scripts for automation.

Barnoy, Assaf↗

The InSAR Scientific Computing Environment

We have developed a flexible and extensible Interferometric SAR (InSAR) Scientific Computing Environment (ISCE) for geodetic image processing. ISCE was designed from the ground up as a geophysics community tool for generating stacks of interferograms that lend themselves to various forms of time-series analysis, with attention paid to accuracy, extensibility, and modularity. The framework is python-based, with code elements rigorously componentized by separating input/output operations from the processing engines. This allows greater flexibility and extensibility in the data models, and creates algorithmic code that is less susceptible to unnecessary modification when new data types and sensors are available. In addition, the components support provenance and checkpointing to facilitate reprocessing and algorithm exploration. The algorithms, based on legacy processing codes, have been adapted to assume a common reference track approach for all images acquired from nearby orbits, simplifying and systematizing the geometry for time-series analysis. The framework is designed to easily allow user contributions, and is distributed for free use by researchers. ISCE can process data from the ALOS, ERS, EnviSAT, Cosmo-SkyMed, RadarSAT-1, RadarSAT-2, and TerraSAR-X platforms, starting from Level-0 or Level 1 as provided from the data source, and going as far as Level 3 geocoded deformation products. With its flexible design, it can be extended with raw/meta data parsers to enable it to work with radar data from other platforms

geodetic imaging↗

Transient flow analysis of the AEDC/HPDE MHD generator

A hybrid Lax-Wendroff/Method of Characteristics computer code has been developed for numerical simulation of flow transients associated with the operation of MHD generator facilities. The code employs the shock-fitting method, with an Eulerian formulation of the basic conservation equations and explicit tracking of shock waves. Pressure, temperature, and velocity are used as primary integration variables to simplify interfacing of the code with real-gas thermodynamic and transport property tables. Application of the code to the simulation of selected transients for the AEDC/HPDE MHD generator produced results that are in good agreement with experimental observations.

Wilson, D. R.↗