Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensor development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Opportunities for space surveys of moisture anomalies

Review of a combination of infrared scanning, unsupervised spectroscopic classification, change detection, and perturbation spectroscopy for monitoring anomalous moisture exchange from space. Infrared sensors have been developed which can monitor the solar reflectance from droplet distributions in vegetation and clouds, the absorption of thermal radiation by water vapor, and the microwave attenuation by atmospheric water. Unsupervised spectroscopic classification techniques are emerging which have the potential to subdivide strip maps from infrared scanners into different moisture targets. Intersecting and parallel spacecraft orbits provide opportunities to study the change of recognized targets between two scans and to recognize anomalous moisture exchange from those changes which significantly exceed the statistical uncertainty of the spectroscopic target signature. The new concept of perturbation spectroscopy shows a potential to quantitatively determine the change of integrated water vapor pressure with a minimum of 'atmospheric truth' and with low spectroscopic resolution that is typical of simple interference filters.

Krause, F. R.↗
NASA NTRS1975

Wide-angle sun sensors

Two sensors have been developed: one, single-axis device, is cylindrical; the other, two-axis device, is spherical. Multiple surface deposits of photosensitive material, such as cadmium sulfide, serve as redundancy, ensuring high reliability.

Schumacher, L. L.↗
NASA NTRS1975

Program to design, fabricate, test, and deliver a thermal control-mixing control device, phase 1

The development of a sensor capable of detecting temperature changes as a function of viscosity changes, was completed. This type of sensor, consisting of an orifice bridge circuit, resulted in a device with a threshold above internally generated noise of 0.8C (1.5F). Data were obtained using a noise free Freon source provided by an air pressurized bladder. Tests conducted to operate the sensor from a typical Freon centrifugal pump system employing an air bubble accumulator for noise attentuation disclosed the sensor could be used only to sense temperature changes greater than 3.3C (6F) because of the excessively noisy output. This is attributed to the high frequency-pressure fluctuations in the Freon supply to the sensor.

Thurston, T. S.↗
NASA NTRS1976

Intensified charge coupled devices for ultra low light level imaging

Development of a sensor incorporating a CCD and photocathode for operation in the electron bombarded mode in both a magnetic and an electrostatic focussed, gated configuration is described. Initial format size is 100 x 160 pixels with eventual growth to 400 x 400 pixels. The sensor is part of a digital camera system which includes the low level video conditioning electronics, a camera controller, a high speed buffer memory, and digital recording and display electronics. The memory uses CMOS/SOS and has a capacity of 1.6 Mbits with operating rates of 48 Mbits/sec. Individual frames are co-added to provide wide dynamic range and photometric precision better than 1%. A 4-bit video quantization is used to increase the photon counting detection rate before coincidence losses become serious.

Sobieski, S.↗
NASA NTRS1977

STRATCOM-8 scientific objectives and mission orginization

Stratospheric photochemistry was studied, with emphasis on the Ozone-NOx-ultraviolet flux interactions, but also including members of the chlorine, water vapor, and carbon-containing families. Secondary objectives include: (1) study of the balloon environment, (2) comparison of independent measurements of ozone and of NO, (3) development of new sensor systems; and (4) some measurements for exploratory purposes. Most, but not all, systems and instruments performed as planned, and it is believed that data are available to achieve most of the planned scientific and engineering objectives. The emphasis on photochemistry in the 35 to 40 km region is greater than anticipated, and observations are more complete for sunset than for sunrise. The planned instruments and a summary of the flight operations is discussed partly for the mutual information of those participating and partly for the wider scientific community.

Reed, E. I.↗
NASA NTRS1977

Analysis and design of a capsule landing system and surface vehicle control system for Mars exploration

A number of problems related to unmanned exploration of planets or other extraterrestrial bodies with Mars as a case in point were investigated. The design and evaluation of a prototype rover concept with emphasis on mobility, maneuverability, stability, control and propulsion is described along with the development of terrain sensor concepts and associated software for the autonomous control of any planetary rover. Results are applicable not only to the design of a mission rover but the vehicle is used as a test bed for the rigorous evaluation of alternative autonomous control systems.

Gisser, D. G.↗
NASA NTRS1978

High altitude perspective

The capabilities of the NASA Ames Center U-2 aircraft for research or experimental programs are described for such areas as Earth resources inventories; remote sensing data interpretation, electronic sensor research and development; satellite investigative support; stratospheric gas studies; and astronomy and astrophysics. The availability of this aircraft on a cost-reimbursable basis for use in high-altitude investigations that cannot be performed by the private sector is discussed.

Source record↗
NASA NTRS1978

Structural Alignment Sensor Feasibility Demonstration

A structural alignment sensor (SAS) was developed for use with large deployable antenna systems for contour measurement and/or active control. The SAS is a laser ranging system using frequency modulation and accurate phase measurement to determine distance. Work was done with a CO2 and HeNe laser. The capability of the SAS to measure antenna rib contours was studied over ranges of 50 meters to a resolution of 100 microns. Initial resolution data was taken with the CO2 system. This data shows that it will indeed meet the SAS requirements. The development of the HeNe system was initiated because it offers substantial improvement in size, weight, and power over the CO2 system. The final demonstration was made with the HeNe system and it too showed that the SAS requirements could be met with this alternate approach. The projection of these results to a conceptual design for a flight system and its application are described.

Anderson, R. H.↗
NASA NTRS1978

STRATCOM 8 Data Workshop and supplement

The STRATCOM-8 effort took place at Holloman Air Force Base and White Sands Missile Range, New Mexico, on September 28-30, 1977. The prime emphasis was on the study of stratospheric photochemistry involving ozone, with secondary objectives including a study of the balloon environment, comparison of independent techniques for the measurement of O3 and NO, and the development of new sensor systems. More than forty sensors were included on the two large balloons, a U-2 aircraft, and several rockets and small balloons, in addition to meteorological balloons and rockets. Most of the systems performed as expected.

Reed, E. L.↗
NASA NTRS1979

Measurement of chlorophyll a fluorescence with an airborne fluorosensor

Phytoplankton biomass and diversity among various algal species are important for marine productivity assessments. The spatial heterogeneity of phytoplankton in coastal and estuarine environments complicates estimates of total biomass using conventional surface sampling techniques. Since synoptic or near-synoptic data can be quite useful in these studies, this area is a natural focal point for development of remote sensors. However, it is very difficult to sense phytoplankton density and diversity with spacecraft-borne passive sensors primarily because modulation in the signal due to phytoplankton is of the same order as that of atmospheric effects. The same sensors mounted on aircraft may be able to detect and quantify high concentrations of phytoplankton (blooms), but the current lack of knowledge about the spectral reflectance signatures of the major phytoplankton color groups rules out any diversity measurements by this type of sensor. An active fluorosensor mounted on a low-flying aircraft or helicopter is not limited by any of these constraints. A brief survey of the four currently active systems is presented.

Jarrett, O., Jr.↗
NASA NTRS1979

Information adaptive system of NEEDS

The NASA End-to-End Data System (NEEDS) program was initiated by NASA to improve significantly the state of the art in acquisition, processing, and distribution of space-acquired data for the mid-1980s and beyond. The information adaptive system (IAS) is a program element under NEEDS Phase II which addresses sensor specific processing on board the spacecraft. The IAS program is a logical first step toward smart sensors, and IAS developments - particularly the system components and key technology improvements - are applicable to future smart efforts. The paper describes the design goals and functional elements of the IAS. In addition, the schedule for IAS development and demonstration is discussed.

Howle, W. M., Jr.↗
NASA NTRS1980

Integrated optic waveguide devices

Integrated optic waveguide circuits with a phase bias and modulator on the same chip were designed, fabricated, and tested for use in a fiber-optic rotation sensor (gyro) under development. Single mode fiber-optic pigtails were permanently coupled to the four ports of the chip. The switch format was based on coherent coupling between waveguides formed in Z-cut LiNbO3. The control of the coupling was achieved by electro-optically varying the phase propagation constants of each guide. Fiber-to-chip interfacing required the development of appropriate fixturing and manipulation techniques to achieve the close tolerance needed for high coupling efficiency between a fiber with an approximately 5 micron m core and a channel guide with a roughly 2 micron m by 5 micron m cross section. Switch and chip performance at 0.85 micron m is discussed as well as potential improvements related to insertion loss reduction, switching voltages, and suppression of Li2O out-diffusion.

Ramer, O. G.↗
NASA NTRS1980

Role of teleoperators in space structures technology

A review is presented of extensive experimental work on the control of remote manipulators for handling, assembly, and maintenance work on large orbiting structures. Among the prime areas identified for further research and development are: new sensor system concepts to make sensors suitable for the highly demanding space environment, improved man/machine interface designs to provide a more efficient command/information flow between operator and remote manipulator, and new approaches to the design of interactive manual/computer controls within the framework of a supervisory control system.

Bejczy, A. K.↗
NASA NTRS1981

Severe storms and local weather research

Developments in the use of space related techniques to understand storms and local weather are summarized. The observation of lightning, storm development, cloud development, mesoscale phenomena, and ageostrophic circulation are discussed. Data acquisition, analysis, and the development of improved sensor and computer systems capability are described. Signal processing and analysis and application of Doppler lidar data are discussed. Progress in numerous experiments is summarized.

Source record↗
NASA NTRS1982

Measurement of soil moisture using remote sensing multisensor radiation techniques

Theoretical modeling as well as laboratory and field measurement were coupled with analysis of aircraft data obtained from controlled sites in an effort to enhance understanding of the microwave response due to soil moisture so as to specify sensor parameters and develop inversion algorithms. Models to predict the complex dielectric constant were produced which led to the interpretation of the results in terms of a matrix potential rather than simply moisture content. Similar advances were made in the development of coherent and incoherent radiative transfer models and rough surface scattering models.

Waite, W. P.↗
NASA NTRS1983

Lightning mapping sensor study

A technology assessment to determine how a world-wide, continuous measurement of lightning could be achieved from a geostationary platform is provided. Various approaches to the detector sensors are presented. It was first determined that any existing detector chips would require some degree of modification in order to meet the lightning mapper sensor requirements. The elements of the system were then analyzed, categorized, and graded for study emphasis. The recommended approach for the lightning mapper sensor is to develop a monolithic array in which each detector cell has circuitry that implements a two-step photon-collecting method for a very high dynamic range with good measurement accuracy. The efficiency of the array is compatible with the use of a conventional refractive optics design having an aperture in the neighborhood of 7 to 10 cm.

Norwood, V.↗
NASA NTRS1984

Investigation of design considerations for a complex demodulation filter

The digital design of an adaptive digital filter to be employed in the processing of microwave remote sensor data was developed. In particular, a complex demodulation approach was developed to provide narrow band power estimation for a proposed Doppler scatterometer system. This scatterometer was considered for application in the proposed National Oceanographic survey satellite, on an improvement of SEASAT features. A generalized analysis of complex diagrams for the digital architecture component of the proposed system.

Stoughton, J. W.↗
NASA NTRS1984

L band push broom microwave radiometer: Soil moisture verification and time series experiment Delmarva Peninsula

The verification of a multi-sensor aircraft system developed to study soil moisture applications is discussed. This system consisted of a three beam push broom L band microwave radiometer, a thermal infrared scanner, a multispectral scanner, video and photographic cameras and an onboard navigational instrument. Ten flights were made of agricultural sites in Maryland and Delaware with little or no vegetation cover. Comparisons of aircraft and ground measurements showed that the system was reliable and consistent. Time series analysis of microwave and evaporation data showed a strong similarity that indicates a potential direction for future research.

Jackson, T. J.↗