Search NASA⌕ Search

SEARCH · Search NASA

Results for “improved microstructures and properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81

Chemical instability at chalcogenide surfaces impacts chalcopyrite devices well beyond the surface

The electrical and optoelectronic properties of materials are determined by the chemical potentials of their constituents. The relative density of point defects is thus controlled, allowing to craft microstructure, trap densities and doping levels. Here, we show that the chemical potentials of chalcogenide materials near the edge of their existence region are not only determined during growth but also at room temperature by post-processing. In particular, we study the generation of anion vacancies, which are critical defects in chalcogenide semiconductors and topological insulators. The example of CuInSe 2 photovoltaic semiconductor reveals that single phase material crosses the phase boundary and forms surface secondary phases upon oxidation, thereby creating anion vacancies. The arising metastable point defect population explains a common root cause of performance losses. This study shows how selective defect annihilation is attained with tailored chemical treatments that mitigate anion vacancy formation and improve the performance of CuInSe 2 solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physically Based Modeling of PEMFC Cathode Catalyst Layers: Effective Microstructure and Ionomer Structure–Property Relationship Impacts

Abstract This work presents a pseudo-two-dimensional proton exchange membrane fuel cell (PEMFC) model incorporating Nafion ionomer structure–property relationships in the cathode catalyst layer (CL) to capture and explain losses at low Pt loading. Structural data from neutron reflectometry and thin film Nafion conductivity measurements predict variations in the oxygen diffusion coefficient and ionic conductivity with changing CL ionomer thickness and Pt loading. By including these structure–property relationships, predicted polarization curves agree closely with previously published experimental data from cells with Pt loadings between 0.025 and 0.2 mg/cm2. Results demonstrate that structure–property relationships based on physically measurable ionomer and CL properties provide a feasible interpretation of PEMFC CL phenomena for a range of Pt loadings and help explain previously unaccounted-for losses at low Pt. Results also show that simulations must account for surface species coverage variations in order to properly capture the kinetic losses. Finally, results suggest that an increase in ionomer thickness surrounding the C/Pt surfaces may lead to improved cell performance due to improved ionic conductivity.

Electrochemistry↗

The Prediction and Simulation for the Mechanical Properties of Ceramic-Based Composites Reinforced with Nano-Micro Particles

The global-local homogenization method with precise period boundary conditions is applied to predict and simulate the mechanical properties of ceramic composites reinforced by spherical nano-micro particles with enwrapping and nesting arrays. The numerical simulation is performed with different size ratios of nano-micro particles, and different configurations for representative volume element. The results show that the low radius ratios of nano-micro particles produce a larger effective Young's modulus for its more uniform dispersion, and the hexagon RVE with nesting array can make an overestimation for effective elastic modulus of ceramic composites, and the interfacial damage between nano-microscopic particles and matrix degenerates the effective elastic modulus. It shows in this paper that it is significant to improve the mechanical properties of ceramic materials by mixing some nano- and micro-particles into the matrix with good designed array methods from the viewpoints of nano-microscopic crystal structure, and a rational interfacial damage model should be further proposed to investigate the toughening mechanism of ceramic-composites reinforced with nano-micro particles.

36 MATERIALS SCIENCE↗

Electrical and Thermal Performance of Ga₂O₃–Al₂O₃–Diamond Super-Junction Schottky Barrier Diodes

The design space of Ga 2 O 3 -based devices is severely constrained due to its low thermal conductivity and absence of viable p-type dopants. In this work, we discuss the limits of operation of a novel Ga 2 O 3 –Al 2 O 3 –diamond-based super-junction device concept, which can alleviate the constraints associated with Ga 2 O 3 -based devices. The improvements achieved using the proposed device concept are demonstrated through electrical and thermal simulations of Ga 2 O 3 –Al 2 O 3 –diamond-based super-junction Schottky barrier diodes (SJ-SBDs) and non-punch-through or conventional Schottky barrier diodes (NP-SBDs). The SJ-SBD enables operation below the R ON -breakdown voltage limit of Ga 2 O 3 NP-SBD, enabling >4 kV blocking voltage at R ON of 1–3 mΩ cm 2 . Here, the maximum switching frequency of SJ-SBD may be only a few kHz, as it is limited by the activation energy of acceptors (0.39 eV) in the diamond. Crucially, compared with NP-SBD, the use of diamond also results in ~60% reduction in temperature rise during static power dissipation. Polycrystalline diamond (PCD) properties depend on detailed microstructure and benefits compared to ideal Ga 2 O 3</sub NP-SBD arise for diamond critical fields ≥6 MV/cm and thermal conductivities as low as 50–150 W/(m • K).

36 MATERIALS SCIENCE↗

2nd Gen FeCrAl ODS Alloy Development For Accident-Tolerant Fuel Cladding

Extensive research at ORNL aims at developing advanced low-Cr high strength FeCrAl alloys for accident tolerant fuel cladding. One task focuses on the fabrication of new low Cr oxide dispersion strengthened (ODS) FeCrAl alloys. The first Fe-12Cr-5Al+Y 2 O 3 (+ ZrO 2 or TiO 2 ) ODS alloys exhibited excellent tensile strength up to 800 C and good oxidation resistance in steam up to 1400 C, but very limited plastic deformation at temperature ranging from room to 800 C. To improve alloy ductility, several fabrication parameters were considered. New Fe-10-12Cr-6Al gas-atomized powders containing 0.15 to 0.5wt% Zr were procured and ball milled for 10h, 20h or 40h with Y2O3. The resulting powder was then extruded at temperature ranging from 900 to 1050 C. Decreasing the ball milling time or increasing the extrusion temperature changed the alloy grain size leading to lower strength but enhanced ductility. Small variations of the Cr, Zr, O and N content did not seem to significantly impact the alloy tensile properties, and, overall, the 2nd gen ODS FeCrAl alloys showed significantly better ductility than the 1st gen alloys. Tube fabrication needed for fuel cladding will require cold or warm working associated with softening heat treatments, work was therefore initiated to assess the effect of these fabrications steps on the alloy microstructure and properties. This report has been submitted as fulfillment of milestone M3FT 16OR020202091 titled, Report on 2nd Gen FeCrAl ODS Alloy Development for the Department of Energy Office of Nuclear Energy, Advanced Fuel Campaign of the Fuel Cycle R&D program.

36 MATERIALS SCIENCE↗

Roadmap for the Application of Ion Beam Technologies to Challenges for the Advancement and Implementation of Nuclear Energy Technologies

The use of ion beams in interrogating materials performance for nuclear energy applications is advancing at a rapid rate. Ion irradiations have been proven to produce radiation effects data that are of direct relevance for understanding neutron-induced displacement damage. This development reflects significant and continued investment in infrastructure by the U.S. Department of Energy (DOE) as well as support of science and engineering research at universities and national laboratories. Application of ion beam irradiation methods to enhance the deployment of materials in reactors is in the spirit of the Gateway for Accelerated Innovation in Nuclear (GAIN) initiative sponsored by DOE to accelerate the deployment of innovation in the U.S. nuclear industry. Ion beam irradiation shows considerable promise for assisting in down selecting candidate materials for use in both current and advanced nuclear energy systems. Ion beams allow rapid achievement of materials damage levels not accessible by neutron irradiation in test reactors due to cost and time constraints. Ion beam studies provide data on the effects of irradiation under very specific conditions of temperature, radiation dose, and radiation dose rate that are difficult or impossible to achieve via reactor irradiation experiments. This data can be used to develop and validate detailed predictive radiation effects models for use in reactor materials research and development. Despite the current high state of the art and the maturity of quality assurance, there are still challenges to the deployment of ion beam data in support of reactor materials qualification. For the most part, these challenges arise from the lack of a detailed mechanistic understanding of potential difference between ion induced and neutron induced materials damage, which is exacerbated by difficulties in obtaining bulk physical and mechanical properties data from the micron-scale heavy ion irradiation depths. In particular, improved understanding of dose rate effects, as a function of temperature, are needed. This document offers a roadmap for the development and enhancement of current U.S. ion beam irradiation technologies within university and national laboratory settings, and especially for the deployment of new highly controlled in situ interrogation of materials during irradiation to provide dynamic and mechanistic data for model development. The status and capabilities of relevant U.S. ion beam facilities are summarized and recommended “best practices” for performing ion irradiations are described. The potential role of ion beam irradiations to assist the development and deployment of reactor materials is outlined. Key principles include developing methods for rapid and cost-effective materials selection and development, characterizing fundamental material response under irradiation, and developing a robust mechanistic understanding of microstructure evolution under irradiation (including development and validation of reliable predictive models for microstructure evolution).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Atom probe tomography study of Fe-Ni-Al-Cr-Ti ferritic steels with hierarchically-structured precipitates

The ferritic Fe-Ni-Al-Cr-Mo steel (FBB8) has good creep properties up to 700 °C due to B2-NiAl nanoscale precipitates and its creep resistance can be further improved by additions of 2 or 4 wt.% Ti, as a result of sub-precipitates within the main precipitates. We report the hierarchical structure of the precipitates is studied in the light of phase separation via transmission electron microscopy (TEM) and atom probe tomography (APT). For FBB8-2Ti (with 2% Ti added) exhibiting B2-NiAl precipitates with L2 1 -Ni 2 AlTi sub-precipitates, APT analysis shows strong partitioning of Ni, Al and Ti from the ferritic matrix into the B2/L2 1 precipitates and, within the precipitates, partitioning of Ti and Fe within the L2 1 sub-precipitates. Based on the published pseudo-binary phase-diagram between (Ni,Fe)Al and (Ni,Fe)Ti, this hierarchical precipitate microstructure is discussed based on the known miscibility gap between the B2 and L2 1 phases, due to partitioning of Ti into the L2 1 phase and ordering of Al and Ti on the Al sub-lattice of the B2 structure. For FBB8-4Ti (with 4% Ti added), by contrast, the L2 1 precipitates exhibit bcc sub-precipitates rich in Fe and Cr, with a composition close to that of the matrix; the absence of the B2 structure is consistent with an increase of Ti and Fe concentrations, to 18.2 and 19.3 at.% respectively, as measured via APT, in the L2 1 precipitates.

36 MATERIALS SCIENCE↗

Superconducting metamaterials - the first step toward a microwave quantum bus

Coherent manipulation of quantum states is at the core of quantum information science (QIS). Many state-of-the-art quantum systems rely on microwave fields for quantum operations. As such, the microwave electromagnetic fields serve as the ideal "quantum bus" to integrate different types of QIS systems into a hybrid quantum system. Superconducting metamaterials are artificial materials consisting of arrays of superconducting resonant microstructures with sizes much smaller than the microwave wavelengths of interest. Superconducting metamaterials are a strong candidate medium for the microwave quantum bus, because the effective impedance, field distributions, and frequency response can all be controlled by engineering the microstructures, electrical bias, and magnetic flux while maintaining extremely low loss. In this project, we investigate the fundamental unit of a superconducting metamaterial - a resonator with physical dimensions much smaller than the microwave wavelengths - using NbTiN as the working superconductor, whose high operating temperatures and magnetic fields are desirable attributes for compatibility with a wide variety of quantum systems. We first studied the properties of sputtered NbTiN thin films by correlating the film thickness with the normal state resistivity, superconducting transition temperature, and resonances of transmission line resonators made from these films. We developed a process flow and designed a coplanar waveguide platform for studying small resonators. The platform significantly shortens the turnaround times of the resonator fabrication and testing cycles. Several resonators with different designs were fabricated and tested at 4 Kelvin. Resonances were observed in some resonator testers. Potential paths for improvements and future directions are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure, hardness and cavitation erosion resistance of different cold spray coatings on stainless steel 316 for hydropower applications

There is an urgent need for repair of hydropower components that have undergone damage due to cavitation. Conventional repair methods involve melting of materials and can deteriorate material properties and cause distortion. This study investigated the relevant properties of different materials using solid phase processing—cold spray technology. Stainless steel (SS) 316, Inconel 625 and CrC-NiCr materials were cold spray deposited onto base metal SS 316, respectively. Cold spray achieved dense uniform deposits with low level porosity, and intimate contact between the deposit and the base metal was observed. Severe plastic deformation imparted during the cold spray process resulted in significant grain size refinement, nanostructured regions were observed in the deposits across the interfacial area. Cold sprayed deposits exhibited elevated hardness in contrast to that of the base metal SS 316. The cavitation erosion resistance of the deposits was evaluated with a cavitation erosion jet adhering to ASTM G134. Both SS 316 and Inconel 625 achieved better cavitation erosion resistance when compared to that of the SS 316 base metal, with the former exhibiting close to a 4 times improvement.

Jiang, Xiujuan↗

Belite cements and their activation

Belite cements, BCs, containing mainly belite, alite and calcium aluminates, are currently used as low heat cements. These binders produce high amounts of C–S–H gel and have very good durability properties which are reviewed. Additional advantages include: (i) lower limestone demand, with lower associated CO{sub 2} emissions; (ii) lower energy demand; (iii) lower kiln operating temperature, which means lowering CO{sub 2} and NO{sub x} emissions from fuel burning; and (iv) lower temperature increase at early hydration age. However, early-age strength developments are not competitive with those of Portland cements. Hence, to improve their early-age strength developments is a research priority known as activation. This enhancement can be attained by three compatible approaches: (i) chemical, (ii) physical; and (iii) admixture activations. The current research status for BCs activation is reviewed including: cost-effective element substitutions to stabilize high-temperature forms; fast cooling, milling and mild temperature hydration as physical activation; and the use of C–S–H seeds as admixture activation. After discussion of the resulting microstructures, a research outlook is exercised.

36 MATERIALS SCIENCE↗

Mechanical Behavior Assessment of Ti-6Al-4V ELI Alloy Produced by Laser Powder Bed Fusion

The present work correlates the quasi-static, tensile mechanical properties of additively manufactured Ti-6Al-4V extra low interstitial (ELI, Grade 23) alloy to the phase constituents, microstructure, and fracture surface characteristics that changed with post-heat treatment of stress relief (670 °C for 5 h) and hot isostatic pressing (HIP with 100 MPa at 920 °C for 2 h under an Ar atmosphere). Ti-6Al-4V ELI alloy tensile specimens in both the horizontal (i.e., X and Y) and vertical (Z) directions were produced by the laser powder bed fusion (LPBF) technique. Higher yield strength (1141 MPa), higher tensile strength (1190 MPa), but lower elongation at fracture (6.9%), along with mechanical anisotropy were observed for as-stress-relieved (ASR) samples. However, after HIP, consistent and isotropic mechanical behaviors were observed with a slight reduction in yield strength (928 MPa) and tensile strength (1003 MPa), but with a significant improvement in elongation at fracture (16.1%). Phase constituents of acicular α' phase in ASR and lamellar α + β phases in HIP samples were observed and quantified to corroborate the reduction in strength and increase in ductility. The anisotropic variation in elongation at fracture observed for the ASR samples, particularly built in the build (Z) direction, was related to the presence of “keyhole” porosity.

42 ENGINEERING↗

Magnetic, dielectric, magnetoelectric, and microstructural studies demonstrating improved magnetoelectric sensitivity in three-phase BaTiO{sub 3}-CoFe{sub 2}O{sub 4}-poly(vinylidene-fluoride) composite

A three-phase BaTiO{sub 3}-CoFe{sub 2}O{sub 4}-poly(vinylidene-fluoride) (BT-CF-PVDF) particulate composite showing a maximum magnetoelectric voltage coefficient alpha{sub E33}approx26 mV/cm Oe, at a small applied magnetic field H{sub DC}=263 Oe, has been demonstrated in this work. Large magnetoelectric response in this composite (particulate BT-CF embedded in PVDF matrix) is possibly a result of the effective mechanical interaction between CF and BT through the PVDF matrix. Processing temperatures for composite preparation are low, ensuring no chemical reaction or interdiffusion between the atoms of piezoelectric and magnetostrictive phases, leading to large value of magnetoelectric voltage coefficient. Detailed measurements of dielectric, magnetic, and static magnetoelectric data are reported. Peak in the dielectric spectrum is shown to correlate with the buildup of magnetization in the composite. Although the M-H loop gives M{sub s}, M{sub r}, and H{sub c} (=37.2 emu/g, 16.4 emu/g, and 830 Oe, respectively) in accordance with the expected values (wt % of CF in the composite is 52.5%), the overall magnetic behavior of the composite is identified as 'spin glass'.

36 MATERIALS SCIENCE↗

Using lifetime of point defects for dislocation bias in bcc Fe

The interaction between dislocations and point defects is key to deformation processes and microstructural evolution of structural materials. In this work, we compute the lifetime of point defects to describe their interaction with dislocations. This approach can accurately account for the effects of the dislocation core and anisotropic defect dynamics to accumulatively determine the capture efficiency, sink strength, and dislocation bias at different temperatures and dislocation densities. Particularly, the absorption of point defects by straight screw and edge dislocations in a model bcc iron system is studied. The maximum swelling rates based on the obtained bias factors are in close agreement with a variety of experimental measurements, including both neutron and ion-irradiation data, especially when considering the survival fraction for point defects from displacement cascades. Further, this approach applies to many other processes and sinks, such as dislocation loops and interfaces, providing a powerful means to develop fundamental insights critical for improving radiation resistance and mechanical properties of structural materials through controlling defect interaction and evolution.

36 MATERIALS SCIENCE↗

Stiff isotropic lattices beyond the Maxwell criterion

Materials with a stochastic microstructure, like foams, typically exhibit low mechanical stiffness, whereas lattices with a designed microarchitecture often show notably improved stiffness. These periodic architected materials have previously been designed by rule, using the Maxwell criterion to ensure that their deformation is dominated by the stretching of their struts. Classical designs following this rule tend to be anisotropic, with stiffness depending on the load orientation, but recently, isotropic designs have been reported by superimposing complementary anisotropic lattices. We have designed stiff isotropic lattices de novo with topology optimization, an approach based on continuum finite element analysis. Here, we present results of experiments on these lattices, fabricated by additive manufacturing, that validate predictions of their performance and demonstrate that they are as efficient as those designed by rule, despite appearing to violate the Maxwell criterion. These results highlight the enhanced potential of topology optimization to design materials with unprecedented properties.

42 ENGINEERING↗

Fabrication of metal matrix composite by semi-solid powder processing

Various metal matrix composites (MMCs) are widely used in the automotive, aerospace and electrical industries due to their capability and flexibility in improving the mechanical, thermal and electrical properties of a component. However, current manufacturing technologies may suffer from insufficient process stability and reliability and inadequate economic efficiency and may not be able to satisfy the increasing demands placed on MMCs. Semi-solid powder processing (SPP), a technology that combines traditional powder metallurgy and semi-solid forming methods, has potential to produce MMCs with low cost and high efficiency. In this work, the analytical study and experimental investigation of SPP on the fabrication of MMCs were explored. An analytical model was developed to understand the deformation mechanism of the powder compact in the semi-solid state. The densification behavior of the Al6061 and SiC powder mixtures was investigated with different liquid fractions and SiC volume fractions. The limits of SPP were analyzed in terms of reinforcement phase loading and its impact on the composite microstructure. To explore adoption of new materials, carbon nanotube (CNT) was investigated as a reinforcing material in aluminum matrix using SPP. The process was successfully modeled for the mono-phase powder (Al6061) compaction and the density and density distribution were predicted. The deformation mechanism at low and high liquid fractions was discussed. In addition, the compaction behavior of the ceramic-metal powder mixture was understood, and the SiC loading limit was identified by parametric study. For the fabrication of CNT reinforced Al6061 composite, the mechanical alloying of Al6061-CNT powders was first investigated. A mathematical model was developed to predict the CNT length change during the mechanical alloying process. The effects of mechanical alloying time and processing temperature during SPP were studied on the mechanical, microstructural and compositional properties of the Al6061-CNT composites. A shear lag model was applied to predict the mechanical property (hardness) of the composite. This work demonstrated the promising potential of SPP in the fabrication of particle/fiber (nanotube) reinforced MMCs.

36 MATERIALS SCIENCE↗

A REDUCED ORDER MODELING APPROACH TO PROBABILISTIC CREEP-DAMAGE PREDICTIONS IN FINITE ELEMENT ANALYSIS

This paper introduces a computationally efficient Reduced Order Modeling (ROM) approach for the probabilistic prediction of creep-damage failure. Component-level probabilistic simulations are needed to assess the reliability and safety of high-temperature components. Full-scale probabilistic creep-damage modeling in finite element (FE) approach is computationally expensive requiring many hundreds of simulations to replicate the uncertainty of component failure. To that end, ROM is proposed to minimize the elevated computational cost while controlling the loss of accuracy. It is proposed that full-scale probabilistic simulations can be completed in 1D at a reduced cost, the extremum conditions extracted, and those conditions applied for lower-cost 2D/3D probabilistic simulations of components that capture the mean and uncertainty of failure. The probabilistic Sine-hyperbolic (Sinh) model is selected which in previous work was calibrated to alloy 304 stainless steel. The Sinh model includes probability density functions (pdfs) for test condition (stress and temperature), initial damage (i.e. microstructure), and material properties uncertainty. The Sinh model is programmed into ANSYS finite element software using the USERCREEP.F material subroutine. First, the Sinh model and FE code are subject to verification and validation to ensure the accuracy of the simulations. Numerous Monte Carlo simulations are executed in a 1D model to generate probabilistic creep deformation, damage, and rupture data. This data is analyzed and the probabilistic parameters corresponding to extreme creep response are extracted. The ROM concept is applied where only the extreme conditions are applied in the 2D probabilistic prediction of a component. The probabilistic predictions between the 1D and 2D geometry is compared to assess ROM for creep. The accuracy of the probabilistic prediction employing the ROM approach will potentially reduce the time and cost of simulating complex engineering systems. Future studies will introduce multi-stage Sinh, stochasticity, and spatial uncertainty for improved prediction.

36 MATERIALS SCIENCE↗

The Effect of η Phase Precipitates on the Creep Behavior of Alloy 263 and Variants

Phase stability is an important design parameter for Ni-based superalloys to be used in future advanced ultra-supercritical (AUSC) power plants as exposure times in this type of environment are considerable. In this investigation, microstructures based on candidate alloy 263 were obtained with varying amounts of η precipitates using isothermal exposure at 800°C for times ranging from 1,000 h to 10,000 h. The effect of η phase stability on the creep properties was determined using creep specimens isothermally aged at 800°C for 8 h, 3,000 h, 5,000 h and 10,000 h prior to creep screening. The creep life was found to exponentially decrease with increasing density of η phase while the elongation to failure was found to increase. Furthermore, the minimum creep rate was related to the density of η phase; a relationship that did not depend on the alloy formulation. Modification to the Ti and Al concentrations slowed down the γ' to η transformation while doubling the γ' fraction after standard heat treatment. By modifying the Ti and Al content, and thereby improving γ' stability over η, the creep lives of specimens isothermally aged for up to 5,000 h were greater than that of the nominal alloy in its standard aged condition.

36 MATERIALS SCIENCE↗