Search NASA⌕ Search

SEARCH · Search NASA

Results for “Practical Application”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes

Silicon is regarded as one of the most promising anode materials for next generation lithium-ion batteries. For use in practical applications, a Si electrode must have high capacity, long cycle life, high efficiency, and the fabrication must be industrially scalable. Here, we design and fabricate a yolk-shell structure to meet all these needs. The fabrication is carried out without special equipment and mostly at room temperature. Commercially available Si nanoparticles are completely sealed inside conformal, thin, self-supporting carbon shells, with rationally designed void space in between the particles and the shell. Finally, the well-defined void space allows the Si particles to expand freely without breaking the outer carbon shell, therefore stabilizing the solid-electrolyte interphase on the shell surface. High capacity (~2800 mAh/g at C/10), long cycle life (1000 cycles with 74% capacity retention), and high Coulombic efficiency (99.84%) have been realized in this yolk-shell structured Si electrode.

25 ENERGY STORAGE↗

Conductive Rigid Skeleton Supported Silicon as High-Performance Li-Ion Battery Anodes

A cost effective and scalable method is developed to prepare a core-shell structured Si/B 4 C composite with graphite coating with high efficiency, exceptional rate performance and long-term stability. In this material, conductive B 4 C with high Mohs hardness serves not only as micro-/nano- millers in the ball-milling process to break down micron-sized Si but also as the conductive rigid skeleton to support the in-situ formed sub-10 nm Si particles to alleviate the volume expansion during charge/discharge. The Si/B 4 C composite is coated with a few graphitic layers to further improve the conductivity and stability of the composite. The Si/B4C/graphite (SBG) composite anode shows excellent cyclability with a specific capacity of ~822 mAh∙g -1 (based on the weight of the entire electrode, including binder and conductive carbon) and ~94% capacity retention over 100 cycles at 0.8C rate. This new structure has the potential to provide adequate storage capacity and stability for practical applications, and good opportunity for large scale manufacturing using commercially available materials and technologies.

25 ENERGY STORAGE↗

Lewis Acid–Base Interactions between Polysulfides and Metal Organic Framework in Lithium Sulfur Batteries

Lithium–sulfur (Li–S) battery is one of the most promising energy storage systems because of its high specific capacity of 1675 mAh g –1 based on sulfur. However, the rapid capacity degradation, mainly caused by polysulfide dissolution, remains a significant challenge prior to practical applications. This work demonstrates that a novel Ni-based metal organic framework (Ni-MOF), Ni 6 (BTB) 4 (BP) 3 (BTB = benzene-1,3,5-tribenzoate and BP = 4,4'-bipyridyl), can remarkably immobilize polysulfides within the cathode structure through physical and chemical interactions at molecular level. The capacity retention achieves up to 89% after 100 cycles at 0.1 C. Finally, the excellent performance is attributed to the synergistic effects of the interwoven mesopores (~2.8 nm) and micropores (~1.4 nm) of Ni-MOF, which first provide an ideal matrix to confine polysulfides, and the strong interactions between Lewis acidic Ni(II) center and the polysulfide base, which significantly slow down the migration of soluble polysulfides out of the pores, leading to the excellent cycling performance of Ni-MOF/S composite.

Environmental Molecular Sciences Laboratory↗

Very Stable Electron Field Emission From Strontium Titanate Coated Carbon Nanotube Matrices With Low Emission Thresholds

PMMA-STO-CNT matrices were created by opened-tip vertically-aligned multiwalled carbon nanotubes (VA-MWCNTs) with conformal coating of strontium titanate and Poly(methyl methacrylate). Emission threshold of 0.8 V/μm was demonstrated, about five-fold lower than that of the as-grown VAMWCNTs. Theoretical simulation and modeling suggest that PMMA-STO-CNT matrices have suppressed screening effects and Coulombs’ repulsion forces between electrons in adjacent CNTs, leading to low emission threshold, high emission density, and prolong emission stability. These findings are important for practical application of VA-MWCNTs in field emission devices.

Environmental Molecular Sciences Laboratory↗

Electrical Modulation of the Local Conduction at Oxide Tubular Interfaces

Hetero-interfaces between complex oxides have sparked considerable interest due to their fascinating physical properties and offer new possibilities for next-generation electronic devices. The key to realize practical applications is the control through external stimulus. In this study, we take the self-assembled BiFeO3-CoFe2O4 hetero-interface as a model system to demonstrate the non-volatile electric control of the local conduction at the complex oxide tubular interface. The fundamental mechanism behind this modulation was explored based on static and dynamic conducting atomic force microscopy. We found the movement of oxygen vacancies in the BiFeO3-CoFe2O4 heterostructure is the key to drive this intriguing behavior. This study delivers a possibility of designing new device for next-generation electronic devices.

BFO-CFO↗

Atomic-scale structure of biogenic materials by total X-ray diffraction : A study of bacterial and fungal MnOx.

Biogenic materials are produced by microorganisms and are typically found in a nanophase state. As such, they are difficult to characterize structurally. In this report, we demonstrate how high-energy X-ray diffraction and atomic pair distribution function analysis can be used to determine the atomic-scale structures of MnO{sub x} produced by bacteria and fungi. These structures are well-defined, periodic, and species-specific, built of Mn-O{sub 6} octahedra forming birnessite-type layers and todorokite-type tunnels, respectively. The inherent structural diversity of biogenic material may offer opportunities for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distribution–Based Global Sensitivity Analysis in Hydrology

Global sensitivity analysis (GSA) is routinely used in academic setting to quantify the influence of input variability and uncertainty on predictions of a quantity of interest. Practical applications of GSA are hampered by its high computational cost, which arises from the need to run large (e.g., groundwater) models multiple times, and by its reliance on the analysis of variance, which formally requires input parameters to be uncorrelated. The former difficulty can be alleviated by replacing expensive models with inexpensive (e.g., polynomial) surrogates, while adoption of distribution-based (rather than variance-based) metrics can, in principle, overcome the latter but at significantly increased computational cost. To make use of distribution-based GSA feasible for regional-scale models with a large number of degrees of freedom, we supplement it with a surrogate model built with polynomial chaos expansions with analytically updated coefficients. Here, we demonstrate the computational efficiency of our algorithm on a case study dealing with evaluation of the effects of temperature variability on annual evapotranspiration at the regional scale.

42 ENGINEERING↗

Data Assimilative Optimization of WSA Source Surface and Interface Radii using Particle Filtering

TheWang-Sheeley-Arge (WSA) model estimates solar wind speed and interplanetary magnetic field polarity in the inner heliosphere using global photospheric magnetic field maps. WSA employs the Potential Field Source Surface (PFSS) and Schatten Current Sheet (SCS) models to determine the Sun's global coronal magnetic field. The PFSS and SCS models are connected through two radial parameters, the source surface and interface radii, which specify the overlap region between the inner SCS and outer PFSS models. Though both radii values are adjustable, they have typically been fixed to 2.5 solar radii. Our work highlights how solar wind predictions improve when the radii are allowed to vary over time. Data assimilation using particle filtering (sequential Monte Carlo) is used to infer optimal values over a fixed time window. Solar wind model predictions and satellite observations are compared with a newly developed quality-of-agreement prediction metric. The agreement metric between the model and observations is assumed to correspond to the probability of the two key WSA model parameters, the source surface and interface radii, where the highest metric value implies the optimal radii.We find that the optimal particle filter values of solar radii can perform twice as well as standard values for an exploratory period during Carrington Rotation 1901, with these values also reducing nonphysical kinking effects seen in solar magnetic field lines. Data assimilation choices of input realization and time frame have implications for variation in the solar wind over time. We present this work's theoretical context and practical applications for prediction accuracy.

79 ASTRONOMY AND ASTROPHYSICS↗

Scaling Analysis of Two–Phase Flow in Fractal Permeability Fields

Fluid mixing in permeable media is essential in many practical applications. The mixing process is a consequence of velocity fluctuations owing to geological heterogeneities and mobility contrast of fluids. Heterogeneities in natural rocks are often spatially correlated, and their properties, such as permeability, may be described using fractal distributions. This work models the fractal characteristics of such permeability fields in which the covariance function is expressed as a power-law function. A generalized scaling relation is derived relating various fractal permeability fields using the magnitude of their fluctuations. Here, this relation reveals the self-similar behavior of two-phase flow in such permeable media. To that end, a recently developed, high-resolution numerical simulator is employed to validate the analytically derived scaling relations. Two flow problems are considered in which flow is governed by 1) a linear, and 2) a nonlinear transport equation. Due to the probabilistic representation of the fractal permeability fields, a sensitivity study is conducted for each flow scenario to determine the number of realizations required for statistical convergence. Scaling analysis is performed using ensemble averages of simulated saturation profiles and their mixing lengths. Results support the validity of the developed scaling relation across the range of investigated flow conditions at intermediate times. The dynamics of linear flow in the asymptotic regime is affected by the correlation structure of heterogeneity. In nonlinear flow, scaling behavior appears to be dominated by the degree of nonlinearity.

58 GEOSCIENCES↗

Deep Learning Provides Substantial Improvements to County‐Level Fire Weather Forecasting Over the Western United States

Abstract The recent wildfires in the western United States during 2018 and 2020 caused record‐breaking fire damage and casualties. Despite remarkable advances in fire modeling and weather forecasting, it remains challenging to anticipate catastrophic wildfire events and associated damage. One key missing component is a fire weather prediction system with sufficiently long lead time capable of providing useful regional details. Here, we develop a hybrid prediction model of wildfire danger called CFS with super resolution (CFS‐SR) as a proof of concept to fill that void. The CFS‐SR model is constructed by integrating the Climate Forecast System version 2 with a deep learning (DL) technique from Single Image Super Resolution, a method widely used in enhancing image resolution. We show that for the 2018–2019 fire season, the CFS‐SR model significantly improves accuracy in forecasting fire weather at lead times of up to 7 days with an enhanced spatial resolution up to 4 km. This level of high resolution provides county‐level fire weather forecast, making it more practical for allocating resources to mitigate wildfire danger. Our study demonstrates that a proper combination of ensemble climate predictions with DL techniques can boost predictability at finer spatial scales, increasing the utility of fire weather forecasts for practical applications.

54 ENVIRONMENTAL SCIENCES↗

Visual‐Analytics Bridge Complexity and Accessibility for Robust Urban Water Planning

Urban water resources planning is complicated by unprecedented uncertainty in supply and demand. Real‐world planning often simplifies the full range of uncertainty faced by a system into a limited set of deterministic scenarios to enhance accessibility for decision‐makers and the public. However, overlooking uncertainty can expose the system to failures. On the other end of the spectrum, academically developed tools for scenario analysis rigorously quantify the combined effects of multiple sources of uncertainty, but the practical application of these models is limited by the challenges of information visualization and communication of results. In short, municipal water supply planners lack access to planning frameworks that effectively integrate a rigorous treatment of uncertainty with accessible, user‐friendly visual and interactive tools to enhance user accessibility. In this work, we fill this gap by proposing Visual‐Robust Decision Making, and demonstrate an application for the city of Santa Barbara (SB), CA. Santa Barbara faces multiple uncertainties from pending state and federal regulations to changing hydrology and water demand. The city seeks to increase its water portfolio robustness by expanding its seawater desalination plant, but must decide how much capacity to add. We introduce computational tools that assess uncertainty across nine uncertain drivers identified with the help of water planners in SB. To allow public participation in the desalination expansion decision, we develop interactive visual‐analytics to aid decision‐makers and stakeholders in navigating complex scenario analysis outcomes. Our results quantify the tradeoffs between increased capacity and system robustness and aim to enhance participation and uncertainty characterization of urban water planning efforts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Probabilistic Model for Global EMIC Wave Activity Using Van Allen Probes Observations

Electromagnetic ion cyclotron (EMIC) waves play a key role in radiation belt dynamics through resonant interactions. However, their low occurrence probability, high variability, and spatial intermittency pose challenges for accurate modeling. In this study, we present a machine learning (ML)-based global EMIC wave model built on the entire data set from the Van Allen Probes mission. To capture the distinct statistical characteristics of wave occurrence and amplitude, the model is separated into two modules: an occurrence model trained using ML techniques, and a wave amplitude model sampled from observed probability distributions. The input parameters are limited to real-time or predictable variables to ensure practical applicability. Our model shows strong performance across the entire test set and demonstrates improved predictive capability over a baseline random occurrence model, particularly during quiet geomagnetic conditions. Evaluation during both quiet and active periods confirms the model's ability to represent the clustered and intermittent nature of EMIC wave activity. Furthermore, the model provides global estimates of wave power, enabling integration with radiation belt electron data and showing signatures consistent with wave-induced scattering. We found a good correlation between the global wave activity from the model and relativistic electron observation by Van Allen Probes, regardless of the availability of in situ wave observations. The modular structure of the model also allows for straightforward expansion for additional wave properties, such as wave frequency, which can be modeled independently. This flexible, event-sensitive approach offers a promising framework for data-driven radiation belt simulations and space weather applications.

79 ASTRONOMY AND ASTROPHYSICS↗

How to deal with large models?

The regulatory systems that allow cells to adapt to their environments are exceedingly complex, and although we know a great deal about the intricate mechanistic details of many of these systems, our ability to make accurate predictions about their system-level behaviors is severely limited. We would like to make such predictions for a number of reasons. How can we reverse dysfunctional molecular changes of these systems that cause disease? More generally, how can we harness and direct cellular activities for beneficial purposes? Our ability to make accurate predictions about a system is also a measure of our fundamental understanding of that system. As evidenced by our mastery of technological systems, a useful understanding of a complex system can often be obtained through the development and analysis of a mathematical model, but predictive modeling of cellular regulatory systems, which necessarily relies on quantitative experimentation, is still in its infancy. There is much that we need to learn before modeling for practical applications becomes routine. In particular, we need to address a number of issues surrounding the large number of parameters that are typically found in a model for a cellular regulatory system.

59 BASIC BIOLOGICAL SCIENCES↗

Monolayer semiconductor nanocavity lasers with ultralow thresholds

Engineering the electromagnetic environment of a nanoscale light emitter by a photonic cavity can significantly enhance its spontaneous emission rate through cavity quantum electrodynamics in the Purcell regime. This effect can greatly reduce the lasing threshold of the emitter 1–5 , providing the ultimate low-threshold laser system with small footprint, low power consumption and ultrafast modulation. A state-of-the-art ultra-low threshold nanolaser has been successfully developed though embedding quantum dots into photonic crystal cavity (PhCC) 6–8 . However, several core challenges impede the practical applications of this architecture, including the random positions and compositional fluctuations of the dots 7 , extreme difficulty in current injection8, and lack of compatibility with electronic circuits 7,8 . Here, we report a new strategy to lase, where atomically thin crystalline semiconductor, i.e., a tungsten-diselenide (WSe 2 ) monolayer, is nondestructively and deterministically introduced as a gain medium at the surface of a pre-fabricated PhCC. A new type of continuous-wave nanolaser operating in the visible regime is achieved with an optical pumping threshold as low as 27 nW at 130 K, similar to the value achieved in quantum dot PhCC lasers 7 . The key to the lasing action lies in the monolayer nature of the gain medium, which confines direct-gap excitons to within 1 nm of the PhCC surface. The surface-gain geometry allows unprecedented accessibilities to multi-functionalize the gain, enabling electrically pumped operation. Our scheme is scalable and compatible with integrated photonics for on-chip optical communication technologies.

47 OTHER INSTRUMENTATION↗

High-temperature crystallization of nanocrystals into three-dimensional superlattices

Crystallization of colloidal nanocrystals into superlattices represents a practical bottom-up process with which to create ordered metamaterials with emergent functionalities. With precise control over the size, shape and composition of individual nanocrystals, various single-and multi-component nanocrystal superlattices have been produced, the lattice structures and chemical compositions of which can be accurately engineered. Nanocrystal superlattices are typically prepared by carefully controlling the assembly process through solvent evaporation or destabilization or through DNA-guided crystallization. Slow solvent evaporation or cooling of nanocrystal solutions (over hours or days) is the key element for successful crystallization processes. Here we report the rapid growth (seconds) of micrometre-sized, face-centred-cubic, three-dimensional nanocrystal superlattices during colloidal synthesis at high temperatures (more than 230 degrees Celsius). Using in situ small-angle X-ray scattering, we observe continuous growth of individual nanocrystals within the lattices, which results in simultaneous lattice expansion and fine nanocrystal size control due to the superlattice templates. Thermodynamic models demonstrate that balanced attractive and repulsive interparticle interactions dictated by the ligand coverage on nanocrystal surfaces and nanocrystal core size are responsible for the crystallization process. The interparticle interactions can also be controlled to form different superlattice structures, such as hexagonal close-packed lattices. In conclusion, the rational assembly of various nanocrystal systems into novel materials is thus facilitated for both fundamental research and for practical applications in the fields of magnetics, electronics and catalysis.

36 MATERIALS SCIENCE↗

Chemoselective small molecules that covalently modify one lysine in a non-enzyme protein in plasma

A small molecule that could bind selectively to and then react chemoselectively with a non-enzyme protein in a complex biological fluid, such as blood, could have numerous practical applications. Herein, we report a family of designed stilbenes that selectively and covalently modify the prominent plasma protein transthyretin in preference to more than 4,000 other human plasma proteins. They react chemoselectively with only one of eight lysine {epsilon}-amino groups within transthyretin. The crystal structure confirms the expected binding orientation of the stilbene substructure and the anticipated conjugating amide bond. These covalent transthyretin kinetic stabilizers exhibit superior amyloid inhibition potency compared to their noncovalent counterparts, and they prevent cytotoxicity associated with amyloidogenesis. Though there are a few prodrugs that, upon metabolic activation, react with a cysteine residue inactivating a specific non-enzyme, we are unaware of designed small molecules that react with one lysine {epsilon}-amine within a specific non-enzyme protein in a complex biological fluid.

36 MATERIALS SCIENCE↗

Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode

Lithium metal is the ideal anode for the next generation of high-energy-density batteries. Nevertheless, dendrite growth, side reactions and infinite relative volume change have prevented it from practical applications. Here, we demonstrate a promising metallic lithium anode design by infusing molten lithium into a polymeric matrix. The electrospun polyimide employed is stable against highly reactive molten lithium and, via a conformal layer of zinc oxide coating to render the surface lithiophilic, molten lithium can be drawn into the matrix, affording a nano-porous lithium electrode. Importantly, the polymeric backbone enables uniform lithium stripping/plating, which successfully confines lithium within the matrix, realizing minimum volume change and effective dendrite suppression. The porous electrode reduces the effective current density; thus, flat voltage profiles and stable cycling of more than 100 cycles is achieved even at a high current density of 5 mA cm -2 in both carbonate and ether electrolyte. Furthermore, the advantages of the porous, polymeric matrix provide important insights into the design principles of lithium metal anodes.

36 MATERIALS SCIENCE↗

Enhancing stability and efficiency of perovskite solar cells with crosslinkable silane-functionalized and doped fullerene

The instability of hybrid perovskite materials due to water and moisture arises as one major challenge to be addressed before any practical application of the demonstrated high efficiency perovskite solar cells. Here we report a facile strategy that can simultaneously enhance the stability and efficiency of p-i-n planar heterojunction-structure perovskite devices. Crosslinkable silane molecules with hydrophobic functional groups are bonded onto fullerene to make the fullerene layer highly water-resistant. Methylammonium iodide is introduced in the fullerene layer for n-doping via anion-induced electron transfer, resulting in dramatically increased conductivity over 100-fold. With crosslinkable silane-functionalized and doped fullerene electron transport layer, the perovskite devices deliver an efficiency of 19.5% with a high fill factor of 80.6%. Furthermore, a crosslinked silane-modified fullerene layer also enhances the water and moisture stability of the non-sealed perovskite devices by retaining nearly 90% of their original efficiencies after 30 days’ exposure in an ambient environment.

14 SOLAR ENERGY↗