Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Influence of PEDOT:PSS on the effectiveness of barrier layers prepared by atomic layer deposition in organic light emitting diodes

Organic light emitting diodes (OLEDs) are well suited for energy saving lighting applications, especially when thinking about highly flexible and large area devices. In order to avoid the degradation of the organic components by water and oxygen, OLEDs need to be encapsulated, e.g., by a thin sheet of glass. As the device is then no longer flexible, alternative coatings are required. Atomic layer deposition (ALD) is a very promising approach in this respect. The authors studied OLEDs that were encapsulated by 100 nm Al{sub 2}O{sub 3} deposited by ALD. The authors show that this coating effectively protects the active surface area of the OLEDs from humidity. However, secondary degradation processes still occur at sharp edges of the OLED stack where the extremely thin encapsulation layer does not provide perfect coverage. Particularly, the swelling of poly(3,4-ethylenedioxythiophene) mixed with poly(styrenesulfonate), which is a popular choice for the planarization of the bottom electrode and at the same time acts as a hole injection layer, affects the effectiveness of the encapsulation layer.

36 MATERIALS SCIENCE↗

Fast spatial atomic layer deposition of Al{sub 2}O{sub 3} at low temperature (<100 °C) as a gas permeation barrier for flexible organic light-emitting diode displays

The authors developed a high throughput (70 Å/min) and scalable space-divided atomic layer deposition (ALD) system for thin film encapsulation (TFE) of flexible organic light-emitting diode (OLED) displays at low temperatures (<100 °C). In this paper, the authors report the excellent moisture barrier properties of Al{sub 2}O{sub 3} films deposited on 2G glass substrates of an industrially relevant size (370 × 470 mm{sup 2}) using the newly developed ALD system. This new ALD system reduced the ALD cycle time to less than 1 s. A growth rate of 0.9 Å/cycle was achieved using trimethylaluminum as an Al source and O{sub 3} as an O reactant. The morphological features and step coverage of the Al{sub 2}O{sub 3} films were investigated using field emission scanning electron microscopy. The chemical composition was analyzed using Auger electron spectroscopy. These deposited Al{sub 2}O{sub 3} films demonstrated a good optical transmittance higher than 95% in the visible region based on the ultraviolet visible spectrometer measurements. Water vapor transmission rate lower than the detection limit of the MOCON test (less than 3.0 × 10{sup −3} g/m{sup 2} day) were obtained for the flexible substrates. Based on these results, Al{sub 2}O{sub 3} deposited using our new high-throughput and scalable spatial ALD is considered a good candidate for preparation of TFE films of flexible OLEDs.

36 MATERIALS SCIENCE↗

Design of InGaN-ZnSnGa 2 N 4 quantum wells for high-efficiency amber light emitting diodes

A novel type-II InGaN-ZnSnGa 2 N 4 quantum well (QW) structure is proposed based on recent experimental achievements for the successful epitaxy of ZnSnN 2 -GaN alloys and the determination of their band offsets with GaN. The simulation results indicate that this structure is promising as the active region for high-efficiency InGaN-based amber (λ ~ 590 nm) light-emitting diodes (LEDs). The hole wavefunction in the valence band is better confined with the insertion of a monolayer scale of ZnSnGa 2 N 4 into the InGaN QW while the electron wavefunction in the conduction band is better confined with the incorporation of an AlGaN layer in the GaN quantum barrier. The band structure of the InGaN-ZnSnGa 2 N 4 QW is numerically simulated based on the experimentally measured band offsets between ZnSnGa 2 N 4 and GaN. With the InGaN-ZnSnGa 2 N 4 QW design, a low In content (20%) is required in the InGaN layer to reach a peak emission wavelength of ~590 nm, yet an In composition of 25% is needed to reach the same emission wavelength for a conventional InGaN QW with the same layer thicknesses. Moreover, the electron-hole wavefunction overlap (Гe1-hh1) for the InGaN-ZnSnGa 2 N 4 QW design reaches 18% for an emission wavelength at ~590 nm. This result is much improved over the conventional InGaN QW overlap of 5% emitting at the same wavelength. The increase in electron-hole wavefunction overlap results in an approximately 14 times enhancement in the predicted spontaneous emission radiative recombination rate of the InGaN-ZnSnGa 2 N 4 QW as compared to that of the conventional InGaN QW. This InGaN-ZnSnGa 2 N 4 QW structure design can be promising to pave a new way to achieve high efficiency amber LEDs.

42 ENGINEERING↗

Simulations of emission from microcavity tandem organic light-emitting diodes

Microcavity tandem organic light-emitting diodes (OLEDs) are simulated and compared to experimental results. The simulations are based on two complementary techniques: rigorous finite element solutions of Maxwell's equations and Fourier space scattering matrix solutions. A narrowing and blue shift of the emission spectrum relative to the noncavity single unit OLED is obtained both theoretically and experimentally. In the simulations, a distribution of emitting sources is placed near the interface of the electron transport layer tris(8-hydroxyquinoline) Al (Alq{sub 3}) and the hole transport layer (N,N'-bis(naphthalen-1-yl)-N,N'-bis(phenyl)benzidine) ({alpha}-NPB). Far-field electric field intensities are simulated. The simulated widths of the emission peaks also agree with the experimental results. The simulations of the 2-unit tandem OLEDs shifted the emission to shorter wavelength, in agreement with experimental measurements. The emission spectra's dependence on individual layer thicknesses also agreed well with measurements. Approaches to simulate and improve the light emission intensity from these OLEDs, in particular for white OLEDs, are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Light-sheet autofluorescence lifetime imaging with a single-photon avalanche diode array

Significance: Fluorescence lifetime imaging microscopy (FLIM) of the metabolic co-enzyme nicotinamide adenine dinucleotide (phosphate) [NAD(P)H] is a popular method to monitor single-cell metabolism within unperturbed, living 3D systems. However, FLIM of NAD(P)H has not been performed in a light-sheet geometry, which is advantageous for rapid imaging of cells within live 3D samples. Aim: We aim to design, validate, and demonstrate a proof-of-concept light-sheet system for NAD(P)H FLIM. Approach: A single-photon avalanche diode camera was integrated into a light sheet microscope to achieve optical sectioning and limit out-of-focus contributions for NAD(P)H FLIM of single cells. Results: An NAD(P)H light-sheet FLIM system was built and validated with fluores cence lifetime standards and with time-course imaging of metabolic perturbations in pancreas cancer cells with 10 s integration times. NAD(P)H light-sheet FLIM in vivo was demonstrated with live neutrophil imaging in a larval zebrafish tail wound also with 10 s integration times. Finally, the theoretical and practical imaging speeds for NAD(P)H FLIM were compared across laser scanning and light-sheet geometries, indicating a 30× to 6× acquisition speed advantage for the light sheet compared to the laser scanning geometry. Conclusions: FLIM of NAD(P)H is feasible in a light-sheet geometry and is attrac tive for 3D live cell imaging applications, such as monitoring immune cell metabolism and migration within an organism.

47 OTHER INSTRUMENTATION↗

Time-of-flight measurements of heavy ions using Si PIN diodes

A new off-line timing method for PIN diode signals is presented which allows the plasma delay effect to be suppressed. Velocities of heavy ions measured by the new method are in good agreement within a wide range of masses and energies with velocities measured by time stamp detectors based on microchannel plates.

74 ATOMIC AND MOLECULAR PHYSICS↗

Stability theory of Knudsen plasma diodes

A stability theory is developed for a plasma diode in which an electron beam supplied from the emitter propagates without collisions in the self-consistent electric field against the immobile ion background. An integral equation for the amplitude of the perturbed field is deduced using the Q,G method for the regime without electron reflection from a potential barrier. Analytic solutions to this equation are obtained for a number of important particular cases, and the plasma dispersion properties are examined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Steady states of a diode with counterstreaming electron and positron beams

Steady states of a plasma layer with counterstreaming beams of oppositely charged particles moving without collisions in a self-consistent electric field are analyzed. The study is aimed at clarifying the mechanism of generation and reconstruction of pulsar radiation. Such a layer also models the processes occurring in Knudsen plasma diodes with counterstreaming electron and ion beams. The steady-state solutions are exhaustively classified. The existence of several solutions at the same external parameters is established.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical properties of blue light-emitting diodes in the InGaN/GaN system at high current densities

The current-voltage and brightness-voltage characteristics and the electroluminescence spectra of blue InGaN/GaN-based light-emitting diodes are studied to clarify the cause of the decrease in the emission efficiency at high current densities and high temperatures. It is found that the linear increase in the emission intensity with increasing injection current changes into a sublinear increase, resulting in a decrease in efficiency as the observed photon energy shifts from the mobility edge. The emission intensity decreases with increasing temperature when the photon energy approaches the mobility edge; this results in the reduction in efficiency on overheating. With increasing temperature, the peak of the electroluminescence spectrum shifts to lower photon energies because of the narrowing of the band gap. The results are interpreted taking into account the fact that the density-of-states tails in InGaN are filled not only via trapping of free charge carriers, but also via tunneling transitions into the tail states. The decrease in the emission efficiency at high currents is attributed to the suppression of tunneling injection and the enhancement of losses via the nonradiative recombination channel 'under' the quantum well.

36 MATERIALS SCIENCE↗

AlGaN-based quantum-well heterostructures for deep ultraviolet light-emitting diodes grown by submonolayer discrete plasma-assisted molecular-beam epitaxy

Features of plasma-assisted molecular-beam epitaxy of AlGaN compounds at relatively low temperatures of the substrate (no higher than 740 deg. C) and various stoichiometric conditions for growth of the nitrogen- and metal-enriched layers are studied. Discrete submonolayer epitaxy for formation of quantum wells and n-type blocking layers without varying the fluxes of components was used for the first time in the case of molecular- beam epitaxy with plasma activation of nitrogen for the nanostructures with the Al{sub x}Ga{sub 1-x}N/Al{sub y}Ga{sub 1-y}N quantum wells. Structural and optical properties of the Al{sub x}Ga{sub 1-x}N layers in the entire range of compositions (x = 0-1) and nanostructures based on these layers are studied; these studies indicate that there is photoluminescence at room temperature with minimum wavelength of 230 nm. Based on the analysis of the photoluminescence spectra for bulk layers and nanoheterostructures and their temperature dependences, it is concluded that there are localized states in quantum wells. Using the metal-enriched layers grown on the c-Al{sub 2}O{sub 3} substrates, heterostructures for light-emitting diodes with Al{sub x}Ga{sub 1-x}N/Al{sub y}Ga{sub 1-y}N quantum wells (x = 0.4-0.5, y = x + 0.15) were obtained and demonstrated electroluminescence in the ultraviolet region of the spectrum at the wavelength of 320 nm.

36 MATERIALS SCIENCE↗

Au-TiB{sub x}-n-6H-SiC Schottky barrier diodes: Specific features of charge transport in rectifying and nonrectifying contacts

Mechanism of charge transport in a diode of a silicon carbide's Schottky barrier formed by a quasi-amorphous interstitial phase TiB{sub x} on the surface of n-6H-SiC (0001) single crystals with an uncompensated donor (nitrogen) concentration of {approx}10{sup 18} cm{sup -3} and dislocation density of {approx}(10{sup 6}-10{sup 8}) cm{sup -2} has been studied. It is demonstrated that, at temperatures T {<=} 400 K, the charge transport is governed by the tunneling current along dislocations intersecting the space charge region. At T > 400 K, the mechanism of charge transport changes to a thermionic mechanism with a barrier height of {approx}0.64 eV and ideality factor close to 1.3.

36 MATERIALS SCIENCE↗

Simulation of the subnanosecond cutoff of current in high-power semiconductor diodes

The subnanosecond cutoff of high-density current in the structure of a semiconductor opening-switch diode is investigated within a physico-mathematical model. The model takes into account the space charge and the effect of the electric field, temperature, electron-hole scattering, and scattering by ionized impurities on the carrier mobility. It is established that subnanosecond cutoff of current with a density of several kA/cm{sup 2} occurs at a p-n junction depth exceeding 180 {mu}m, forward pumping time less than 60 ns, and reverse pumping time less than 20 ns. This process is due to the formation of three high-field regions in the stage of current cutoff. Two regions, expanding with a nearly constant velocity, are located in the p region, and the third one, slowly expanding, is in the n region. It is shown that, to implement subnanosecond current cut-off, a set of conditions for the circuit parameters (determining the pump current duration and density) and the dopant profile in the semiconductor structure should be satisfied simultaneously. The simulation results are compared with the experimental data.

36 MATERIALS SCIENCE↗

Effect of the silicon doping level and features of nanostructural arrangement on decrease in external quantum efficiency in InGaN/GaN light-emitting diodes with increasing current

A comprehensive study of blue light-emitting diodes based on quantum-well InGaN/GaN structures with external quantum efficiencies {eta} of up to 40% has been carried out. It is shown that, in the general case, the manner in which the efficiency depends on the current density j is determined by the competition of contributions to the radiative recombination of localized and delocalized carriers. The contribution of the latter grows with worsening structural organization of the nanomaterial, increasing temperature and drive current, and decreasing width of the depleted layer in the active region (under zero bias). The steepest efficiency droop relative to the maximum value (by up to a factor of 2 at j Almost-Equal-To 50 A cm{sup -2}) is observed in the case of heavy doping of the n{sup +}-region (to 10{sup 19} cm{sup -3}) and upon appearance of compensated layers in the active or p{sup +}-region. At j > 50 A cm{sup -2}, the contribution of delocalized carriers is predominant and the current dependences of efficiency are of uniform type, approximated with {eta}(j) {proportional_to} j{sup -b}, where 0.2 < b < 0.3.

36 MATERIALS SCIENCE↗

Probability characteristics of electrical noise in heterojunction light-emitting diodes

A hardware-software complex for measurements of the characteristics of electrical and optical noise in light-emitting diodes (LEDs) in the frequency range from 1 to 40 kHz is described. The electrical noise of several types of heterojunction-based LEDs are studied; these types include red-emission LEDs with AlInGaP/GaAs quantum wells and the green- and blue-emission LEDs with AlInGaN/SiC quantum wells are studied by the method of discrete samples. The spectra of all studied LEDs in the frequency range from 1 to 10 kHz have the form 1/f{sup {gamma}}. It is noteworthy that, for red-emission LEDs, the exponent {gamma} is significantly smaller than unity; this index is close to unity for the green- and blue-emission LEDs. The characteristic time of correlation of the noise of red-emission LEDs by several times exceeds the correlation times for the blue- and green-emission LEDs. It is shown that reduced functions of the amplitude distribution of the noise voltage are close to Gaussian functions with almost the same dispersion for all LED types.

36 MATERIALS SCIENCE↗

Comparison of the properties of AlGaInN light-emitting diode chips of vertical and flip-chip design using silicon as the a submount

Vertical and flip-chip light-emitting diode (LED) chips are compared from the viewpoint of the behavior of current spreading in the active region and the distribution of local temperatures and thermal resistances of chips. AlGaInN LED chips of vertical design are fabricated using Si as a submount and LED flipchips were fabricated with the removal of a sapphire substrate. The latter are also mounted on a Si submount. The active regions of both chips are identical and are about 1 mm{sup 2} in size. It is shown that both the emittance of the crystal surface in the visible range and the distribution of local temperatures estimated from radiation in the infrared region are more uniform in crystals of vertical design. Heat removal from flip-chips is insufficient in regions of the n contact, which do not possess good thermal contact with the submount. As a result, the total thermal resistances between the p-n junction and the submount both for the vertical chips and for flip-chips are approximately 1 K/W. The total area of the flip-chips exceeds that of the vertical design chips by a factor of 1.4.

36 MATERIALS SCIENCE↗

Electrical phenomena in a metal/nanooxide/p{sup +}-silicon structure during its transformation to a resonant-tunneling diode

To investigate and develop novel silicon-based electronic components, the electro-physical effects in a metal-insulator-semiconductor (MIS) structure with nanometer size parameters, gained by enhancement of the silicon doping level up to N{sub A} {approx} 10{sup 19} cm{sup -3} and reduction of the oxide thickness down to 0.4-4.0 nm, have been studied. As a result of such changes, the MIS nanostructure satisfies necessary and sufficient conditions for the electron resonant tunneling that can be observed at relatively low (some volts) reverse biases. Thereby a MIS capacitor can be transformed into a resonant-tunneling diode with substantial extension of its properties and functions.

36 MATERIALS SCIENCE↗

Influence of temperature on the mechanism of carrier injection in light-emitting diodes based on InGaN/GaN multiple quantum wells

The experimental current-voltage characteristics and dependences of the external quantum yield on the current density of light-emitting diodes based on InGaN/GaN multiple quantum wells for the wide temperature range T = 10-400 K are presented. It is shown that, at low-temperatures T < 100 K, the injection of holes into the quantum wells occurs from localized acceptor states. The low-temperature injection of electrons into p-GaN occurs due to quasi-ballistic transport in the region of multiple quantum wells. An increase in temperature leads to an increase in the current which is governed by thermally activated hole and electron injection from the allowed bands of GaN.

36 MATERIALS SCIENCE↗

Circularly polarized electroluminescence of light-emitting InGaAs/GaAs (III, Mn)V diodes on the basis of structures with a tunneling barrier

The comparative investigation of circularly polarized electroluminescence in Zener diodes based on InGaAs/n-GaAs/n{sup +}-GaAs/GaMnAs and InGaAs/n-GaAs/n{sup +}-GaAs/GaMnSb is carried out. It is established that the circularly polarized electroluminescence is associated with the spin injection of electrons from a ferromagnetic semiconductor layer. The luminescence parameters are determined by the properties of these layers. It is shown that the ferromagnetic properties of the GaMnSb layer allow us to obtain circularly polarized emission at room temperature from InGaAs/n-GaAs/n{sup +}-GaAs/GaMnSb heterostructures.

36 MATERIALS SCIENCE↗