Search NASA⌕ Search

SEARCH · Search NASA

Results for “rough surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Plastic relaxation in GeSi layers on Si (001) and Si (115) substrates

It is demonstrated using X-ray diffraction and atomic force microscopy that elastic stresses in GeSi layers on Si (115) substrates relax more effectively than in the same layers on Si (001) substrates. This fact is attributed to the predominant contribution of one of the (111) slip planes on the (115) cut. The atomicforce-microscopy image of the GeSi/Si(115) surface reveals unidirectional slip planes, while the GeSi/Si(001) image contains a grid of orthogonal lines and defects at the points of their intersection. As a result, thick GeSi layers on Si (115) have a reduced surface roughness. A technique for calculating the parameters of relaxation of the layer on the Si (115) substrate using X-ray diffraction data is discussed.

36 MATERIALS SCIENCE↗

Structural properties of ZnO:Al films produced by the sol–gel technique

ZnO:Al films are produced by sol–gel deposition at temperatures of 350–550°C, using different types of reagents. Atomic-force microscopy, X-ray diffraction analysis, Raman spectroscopy, and optical transmittance measurements are used to study the dependence of the structural, morphological, and optical properties of the ZnO:Al coatings on the conditions of deposition. The optical conditions for the production of ZnO:Al layers with preferred orientation in the [001] direction and distinguished by small surface roughness are established. The layers produced in the study possess optical transmittance at a level of up to 95% in a wide spectral range and can be used in optoelectronic devices.

36 MATERIALS SCIENCE↗

Stability Functions in the Stable Surface Layer Derived from the Mellor–Yamada–Nakanishi–Niino (MYNN) Scheme

It is desirable that a surface layer scheme in an atmospheric numerical model is consistent with an atmospheric boundary layer scheme incorporated in the same model. In this study, stability functions based on Monin–Obukhov similarity theory for momentum and heat, φ m and φ h , in the stable surface layer are derived from the Mellor–Yamada–Nakanishi–Niino (MYNN) scheme. The resulting stability functions are approximated by φ m = 1 + 4.8z/L and φ h = 0.74 + 6.0z/L, which can be analytically integrated with respect to height z to obtain momentum and heat fluxes, where L is the Obukhov length. The fluxes thus, obtained are compared with those acquired from stability functions in four previous studies: they are nearly the same as those from two of them, and show better agreement with observational data of the Surface Heat Budget of the Arctic Ocean experiment (SHEBA) over sea ice than those from the other two studies. Detailed comparisons of the results of the MYNN scheme with the SHEBA data suggest that significant variations of the fluxes observed during “winter” when the ice was covered with dry snow may have been caused by those of the surface roughness around the observational site. The stability functions obtained from the MYNN scheme predict that the bulk and flux Richardson numbers approach critical values of 0.26 and 0.21, respectively, in the limit of z/L → ∞. These critical values result from the Kolmogorov hypothesis applied to the turbulent dissipation in the MYNN scheme and are considered to correspond to a transition from Kolmogorov to non-Kolmogorov turbulence.

54 ENVIRONMENTAL SCIENCES↗

Spall strength and ejecta production of gold under explosively driven shock wave compression

Explosively driven shock wave experiments were conducted to characterize the spall strength and ejecta production of high-purity cast gold samples. The samples were from 0.75 to 1.84 mm thick and 30 mm in diameter. Peak stresses up to 44 GPa in gold were generated using PBX-9501 high explosive. Sample free surface and ejecta velocities were recorded using photonic Doppler velocimetry techniques. Lithium niobate pins were used to quantify the time dependence of the ejecta density and the total ejected mass. An optical framing camera for time-resolved imaging and a single-image x-ray radiograph were used for additional characterization. Free surface velocities exhibited a range of spall strengths from 1.7 to 2.4 GPa (mean: 2.0 ±0.3 GPa). The pullback signals were faint, minimal ringing was observed in the velocity records, and the spall layer continued to decelerate after first pull back. These results suggest finite tensile strength was present for some time after the initial void formation. Ejecta were observed for every sample with a roughened free surface, and the ejecta density increased with increased surface roughness, which was different in every experiment. The total ejected mass is consistent with the missing mass model.

36 MATERIALS SCIENCE↗

A Lizard-inspired Tube Inspector (LTI) Robot

This final report summarizes the research findings of the current project. This project is a collaboration between New Mexico State University (NMSU) as a lead (Recipient) and Arizona State University (ASU) as a Co-Recipient. Tubular structures are common components of boilers and heat exchangers in power plants. Over time, these components may suffer corrosion, cracks, and stress-corrosion cracks in either the body or the welded connections. A single tube leakage can cause an outage of several weeks. Regular inspection is a key safety factor when ensuring that power plants are maintained in reliable, operational condition. This inspection, however, is challenging, time-consuming, and in many cases impossible due to accessibility issues and safety concerns. Recent developments in robotic-based inspection can offer a great solution. Hard-to-reach places can be inspected without overhauling the unit, saving time and cost. Although several robots have been designed and implemented successfully for inspecting power plant components, in particular tubular structures, their mobility and flexibility are limited. Most of these robots use wheels for mobility which reduces their maneuverability of these robots. Moreover, they usually use magnets to attach to tubes which will not work on tubes with non-ferromagnetic materials. These robots usually carry measurement tools for a particular non-destructive testing (NDT) method such as ultrasound testing (UT) that requires a couplant to perform a point-by-point (scanning) inspection of the tubular structure. In this project, we developed a versatile lizard-inspired tube inspector (LTI) robot with embedded inspection sensing components for tube inspection which removes the need for point-by-point scanning of tube surface for crack and corrosion detection. Inspired by a “lizard”, the novelty of the current project is the integration of couplant-free ultrasound sensing and transmission, advanced data-driven defect detection and imaging, and friction-based mechanical mobility components in a single robot to eliminate a need for smooth surfaces and simple geometry for mobility and scanning. The LTI robot could replace the wheel-based approach with friction-based mobility to significantly increase the flexibility and maneuverability of the robot. The LTI robot can get into a power plant unit, such as a boiler, from a small area allowing it to access a component of interest for inspection (e.g., move on OD, curved and flat surfaces, non-ferromagnetic or ferromagnetic materials, and tubes with rough surfaces and complex geometries). Additionally, an advanced data-driven method using ultrasound data was pioneered to allow the robot to detect defects in the entire area between the robot’s multi-functional mobility system (grippers). Integrating a couplant-free ultrasound sensing in the robot’s grippers as well as using advanced data-driven methods allowed the LTI to detect defects in the entire cross-section of a tube using its grippers when stationary and when mobile.

20 FOSSIL-FUELED POWER PLANTS↗

Remote measurement of salinity in an estuarine environment.

The microwave emission of sea water is dependent upon salinity in the low microwave spectrum, and it appears possible to measure remotely surface salinity at 21-cm wavelength with an accuracy up to one part salt per thousand parts water (.1%) for a .5 to 3.5% salinity range. The dielectric constant of sea water can be represented by that of NaCl, except that the sea water conductivity is retained. The effects of the atmosphere, cosmic noise, sea surface roughness, and constant radiometer errors can be corrected by using surface calibration measurements. In experiments performed in Mississippi and Louisiana coastal waters salinity accuracies of .3 to .5 were obtained. It is believed that the accuracy was limited by the radiometer used.

Thomann, G. C.↗

Thermal optical surface properties and high-temperature solar energy conversion

The effects of thermal surface properties on the performance of representative point focusing solar power plants are assessed in this paper. The tradeoff relationships are presented in terms of normalized system performance as a function of thermal optical design parameters. Crucial surface properties include solar reflectance, specular spreading due to microscopic roughness, surface error due to manufacturing slope tolerance or waviness and concentrator pointing accuracy. Two representative power conversion systems, a Rankine steam cycle and an open air Brayton cycle, are considered.

Wen, L.↗

A fundamental study of the sticking of insect residues to aircraft wings

The aircraft industry has long been concerned with the increase of drag on airplanes due to fouling of the wings by insects. The present research studied the effects of surface energy and surface roughness on the phenomenon of insect sticking. Aluminum plates of different roughnesses were coated with thin films of polymers with varying surface energies. The coated plates were attached to a custom jig and mounted on top of an automobile for insect collection. Contact angle measurements, X-ray photoelectron spectroscopy and specular reflectance infrared spectroscopy were used to characterize the surface before and after the insect impact experiments. Scanning electron microscopy showed the topography of insect residues on the exposed plates. Moments were calculated in order to find a correlation between the parameters studied and the amount of bugs collected on the plates. An effect of surface energy on the sticking of insect residues was demonstrated.

Eiss, N. S., Jr.↗

Acid dew and the role of chemistry in the dry deposition of reactive gases to wetted surfaces

A formalism is developed to describe the dry deposition of soluble reactive gases to wetted surfaces in terms of the relevant meteorological conditions, the surface roughness, the total amount of liquid water present on the surface, the rate of accumulation of this water, and the species' solubility and reactivity in the surface water. This formulation is then incorporated into a model designed to simulate the generation of acidic dew from the deposition of HNO3, SO2, S(IV) oxidants, H2O2, and O3. Similar to the observations of dew in the continental U.S., the model generates a dewdrop pH of about 4 by the end of the night; the pH can rapidly fall to toxic levels due to rapid evaporation after sunrise. Relatively low deposition velocities are predicted for the SO2 and O3 because of their lower solubilities and hence larger surface resistances than those of the other oxidants. Because the chemical lifetime of the SO2 in the dew is influenced by the atmospheric levels of H2O2, O3, and SO2, the SO2 deposition velocity is a strong function of these species' atmospheric abundances.

Chameides, William L.↗

Integrating Radar, Multispectral, and Landing Site Data for Analysis of the Lunar Surface

Radar maps of the Moon have been produced since the late 1960s, and have been used by a number of authors to study the surface roughness, subsurface rock abundance, and dielectric properties of the lunar surface. These studies focused on a range of topics, including the depth and rock population of the regolith, crater ejecta blankets, pyroclastic mantling layers, and cryptomare deposits. Limited radar sounding data from the Apollo missions identified layering in some regions of the maria. As radar datasets have improved in resolution and calibration, it has become more possible to make quantitative comparisons between the backscatter properties of the Moon, other remote-sensing observations, and the ground truth provided by Surveyor photos and Apollo traverses. This presentation will focus on the results of recent studies of the lunar regolith that make use of these diverse sources of information, and discuss research directions that will be possible with radar data to be collected in the near future.

Campbell, B. A.↗

Space Weathering in the Fine Size Fractions of Lunar Soils: Soil Maturity Effects

The effects of space weathering on the optical properties of lunar materials have been well documented. These effects include a reddened continuum slope, lowered albedo, and attenuated absorption features in reflectance spectra of lunar soils as compared to finely comminuted rocks from the same Apollo sites. However, the regolith processes that cause these effects are not well known, nor is the petrographic setting of the products of these processes fully understood. A Lunar Soil Characterization Consortium has been formed with the purpose of systematically integrating chemical and mineralogical data with the optical properties of lunar soils. Understanding space-weathering effects is critical in order to fully integrate the lunar sample collection with remotely-sensed data from recent robotic missions (e.g., Lunar Prospector, Clementine, and Galileo) We have shown that depositional processes (condensation of impact-derived vapors, sputter deposits, accreted impact material, e.g., splash glass, spherules, etc.) are a major factor in the modification of the optical surfaces of lunar regolith materials. In mature soils, it is the size and distribution of the nanophase metal in the soil grains that has the major effect on optical properties. In this report, we compare and contrast the space-weathering effects in an immature and a mature soil with similar elemental compositions. For this study, we analyzed <10 micron sieve fractions of two Apollo 17 soils, 79221 (mature, Is/FeO = 81) and 71061 (immature, Is/FeO = 14). Details of the sieving procedures and allocation scheme are given else where. The results of other detailed chemical, mineralogical, and spectroscopic analyses of these soil samples are reported elsewhere. A representative sample of each soil was embedded in low-viscosity epoxy, and thin sections (about 70nm thick) were obtained through ultra microtomy. The thin sections used for these analyses typically contained cross sections of up to 500 individual grains. The thin sections were studied using a JEOL 2010 transmission electron microscope (TEM) equipped with a thin window energy-dispersive X-ray (EDX) spectrometer. An individual thin section was selected from each soil, and for each grain in the section we determined (1) the elemental composition by EDX; (2) whether the grain was crystalline or glassy using electron diffraction and darkfield imaging; (3) the presence or absence of rims and accreted material; and (4) the distribution of nanophase Fe where present. Most of the categories are self-evident; however, we divide the agglutinate derived material into agglutinitic glass (glass with approximately the same composition as the bulk soil that contains nanophase Fe with or without vesicles) and agglutinate fragments, which are composed of crystalline grains and agglutinitic glass. Lithic fragments are defined as polymineralic grains with no glass. Pyroxene grains have been divided into high- and low-Ca groups. As expected, there are a number of differences in the petrography of the <10-microns fractions of 79221 and 71061 given the great difference in their respective maturities, but we focus here on two major distinctions: agglutinate content and the number of grains with micropatina. Slightly over 50% of the particles in 79221 consist of agglutinitic glass and agglutinate fragments, while the remainder are predominantly crystalline mineral grains. The agglutinic glass particles contain abundant nanophase Fe and vesicles. Angular particles are rare, with most showing smooth, rounded exteriors, Of the mineral grains analyzed thus far, over 90% of the grains have amorphous rims that contain nanophase Fe (these rims are believed to have formed by vapor deposition and irradiation effects). The nanophase Fe in these rims probably accounts for a significant fraction of the increase in Is/FeO measured in these size fractions. In addition to the rims, the majority of particles also show abundant accreted material in the form of glass splashes and spherules that also contain nanophase Fe. In stark contrast, the surfaces of the mineral grains in the 71061 sample are relatively prisitine, as only about 14% of the mineral grains in the sample exhibited amorphous rims. Furthermore, the mineral particles are more angular and show greater surface roughness than in the mature sample. Accreted material on particle surfaces is rare. Agglutinitic material is a major component of the 71061 sample; however, nanophase Fe and vesicles are not as well developed as in the 79221 sample. It is now recognized that nanophase Fe is probably the main agent in modifying the optical properties of lunar soil grains. The most important result of this study is the observation that in the fine size fractions of mature soils, nearly every grain has nanophase Fe within 100 run of the particle surface. (Additional Information contained in original)

Keller, L. P.↗

Experimental Investigation into the Radar Anomalies on the Surface of Venus

Radar mapping of thc surface of Venus shows areas of high reflectivity (low emissivity) in the Venusian highlands at altitudes between 2.5-4.75 kilometers. The origin of the radar anomalies found in the Venusian highlands remains unclear. Most explanations of the potential causes for these radar anomalies come from theoretical work. Previous studies suggest increased surface roughness or materials with higher dielectric constants as well as surface atmospheric interactions. Several possible candidates of high-dielectric materials are tellurium) ferroelectric materials, and lead or bismuth sulfides. While previous studies have been influential in determining possible sources for the Venus anomalies, only a very few hypotheses have been verified via experimentation. This work intends to experimentally constrain the source of the radar anomalies on Venus. This study proposes to investigate four possible materials that could potentially cause the high reflectivities on the surface of Venus and tests their behavior under simulated Venusian conditions.

Kohler, E.↗

Isolating the Surface Type Influence on Arctic Cloud Properties

In response to anthropogenic climate change, substantial declines in sea ice have been observed. An urgent question is whether and how clouds respond to the changing Arctic surface. Due to the important radiative influence of clouds, the response of clouds to sea ice cover change constitutes a potentially important climate feedback within the Arctic. The sign of this feedback is strongly influenced by the seasonality of the cloud response to sea ice loss. Given the importance of this phenomenon, previous research focused on using observations of inter-annual variability to quantify the cloud-sea ice relationship. However, the reliance on inter-annual variability to assess the covariance between clouds and sea ice make it challenging to control for the influence of large-scale meteorology on the clouds. We have devised an approach that applies an in situ, airborne observational strategy to quantify the influence of surface type on Arctic clouds to satellite data. Our event-based method composites cloud property differences for ocean, marginal ice zone, and sea ice surface types for >5000 MIZ crossing events. We find that cloud properties in non-summer months below ~1.5 km are influenced by surface type such that greater cloud fraction and water content are found over ocean relative to sea ice regions. Results are statistically significantly at the 95% confidence level. During summer, the surface type does not influence the cloud properties. The primary cause of the surface type dependent cloud property differences is the thermodynamic profiles differences that occur between the two surface types: namely, ocean footprints are warmer, moister, have more positive surface turbulent fluxes and are less stable than their sea ice counterparts. We find that the differences in thermodynamic profiles by surface type that correspond to the cloud property differences also explains a significant portion of the variability across events. Our analysis provides evidence that the influence of surface type on cloud properties fundamentally occurs due to the inherent surface temperature differences between the surface types. Significant surface type influences on cloud properties are only found in the presence of surface temperature differences between the surface types and only non-summer months meet this criterion. A conceptual model of this process is as follows, fundamental properties of the ocean and sea ice surface types (e.g., surface albedo, heat capacity/thermal inertia, surface roughness, and thermal conductance) lead to systematic differences in the surface temperature by surface type. In response to this surface temperature difference, atmosphere boundary layer processes (including turbulent mixing and radiation) communicate the surface temperature differences to the lower atmosphere driving the greater stability over sea ice than ocean. These differences in the background thermodynamic state profiles between the surface types yield atmospheric conditions that are more conducive to cloud development over ocean than sea ice. The details of these boundary layer processes are sensitive to the surface type but may not be fundamental to the resulting thermodynamic structure and cloud differences. Thus, our results indicate that to accurately model that cloud response to sea ice loss in climate models the surface type properties that yield the systematic differences in ocean and sea ice temperature (e.g., surface albedo, surface turbulent fluxes parameters, and thermal conductance) must be accurately represented.

Arctic radiation budget↗

Optical properties of sputtered aluminum on graphite/epoxy composite material

Solar absorptance, emittance, and coating thickness were measured for a range of coating thicknesses from about 400 A to 2500 A. The coatings were sputtered from an aluminum target onto 1-inch-diameter substrates of T300/5209 graphite/epoxy composite material with two different surface textures. Solar absorptance and emittance values for the specimens with the smooth surface finish were lower than those for the specimens with the rough surface finish. The ratio of solar absorptance to emittance was higher for the smooth specimens, increasing from 2 to 4 over the coating thickness range, than for the rough ones, which had a constant ratio of about 1. The solar absorptance and emittance values were dependent on the thickness of the sputtered coating.

Witte, William G., Jr.↗

Physically and chemically smooth cesium-antimonide photocathodes on single crystal strontium titanate substrates

The performance of x-ray free electron lasers and ultrafast electron diffraction experiments is largely dependent on the brightness of electron sources from photoinjectors. Here, the maximum brightness from photoinjectors at a particular accelerating gradient is limited by the mean transverse energy (MTE) of electrons emitted from photocathodes. For high quantum efficiency (QE) cathodes like alkali-antimonide thin films, which are essential to mitigate the effects of non-linear photoemission on MTE, the smallest possible MTE and, hence, the highest possible brightness are limited by the nanoscale surface roughness and chemical inhomogeneity. In this work, we show that high QE Cs 3 Sb films grown on lattice-matched strontium titanate (STO) substrates have a factor of 4 smoother, chemically uniform surfaces compared to those traditionally grown on disordered Si surfaces. We perform simulations to calculate roughness induced MTE based on measured topographical and surface-potential variations on the Cs 3 Sb films grown on STO and show that these variations are small enough to have no consequential impact on the MTE and, hence, the brightness.

43 PARTICLE ACCELERATORS↗

Growth temperature effect on the structural and magnetic properties of Fe{sub 3}O{sub 4} films grown by the self-template method

We have investigated the effect of growth temperature on the structure, surface morphology, and magnetic properties of Fe{sub 3}O{sub 4} thin films grown on SrTiO{sub 3}(001) substrates by a self-template method. To eliminate the intermixing of (001) and (111) orientations that usually occurs in spinel films grown on perovskite substrates, a thin self-template layer of (001)-oriented Fe{sub 3}O{sub 4} was deposited on a SrTiO{sub 3}(001) substrate at 400 °C prior to the main film growth at temperatures of up to 1100 °C. Increasing the growth temperature from 400 °C to 1100 °C resulted in greatly improved crystallinity of the Fe{sub 3}O{sub 4} thin films, with the rocking curve width dropping from 1.41° to 0.28°. Surface analysis by atomic force microscopy showed that raising the growth temperature increased the grain size and the surface roughness, ultimately leading to the formation of regular nanopyramid arrays at 1100 °C. The surface roughening and pyramid formation are caused by the dominance of the lowest surface energy spinel (111) crystal facet. The nanopyramids were fully relaxed but still perfectly (001)-oriented in the out-of-plane direction. The largest pyramids had the lowest coercivity due to a reduction of the demagnetization effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling and Analysis of The Pressure Die Casting Using Response Surface Methodology

Pressure die casting is successfully used in the manufacture of Aluminum alloys components for automobile and many other industries. Die casting is a process involving many process parameters having complex relationship with the quality of the cast product. Though various process parameters have influence on the quality of die cast component, major influence is seen by the die casting machine parameters and their proper settings. In the present work, non-linear regression models have been developed for making predictions and analyzing the effect of die casting machine parameters on the performance characteristics of die casting process. Design of Experiments (DOE) with Response Surface Methodology (RSM) has been used to analyze the effect of effect of input parameters and their interaction on the response and further used to develop nonlinear input-output relationships. Die casting machine parameters, namely, fast shot velocity, slow shot to fast shot change over point, intensification pressure and holding time have been considered as the input variables. The quality characteristics of the cast product were determined by porosity, hardness and surface rough roughness (output/responses). Design of experiments has been used to plan the experiments and analyze the impact of variables on the quality of casting. On the other-hand Response Surface Methodology (Central Composite Design) is utilized to develop non-linear input-output relationships (regression models). The developed regression models have been tested for their statistical adequacy through ANOVA test. The practical usefulness of these models has been tested with some test cases. These models can be used to make the predictions about different quality characteristics, for the known set of die casting machine parameters, without conducting the experiments.

36 MATERIALS SCIENCE↗