Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,567 records · Page 87

Deposition of ultrathick heavy-metal alloys on rotating substrates by high-power impulse magnetron sputtering: Target erosion effects

Sputter deposition of ultrathick (≈20μm) Au–Ta alloy coatings on sphero-cylindrical substrates is key for the fabrication of hohlraums for magnetically assisted inertial confinement fusion. In this work, we study the deposition of AuTa 4 alloy coatings onto rotating substrates. We use high-power impulse magnetron sputtering (HiPIMS) in a constant peak target voltage mode. Results show that the target erosion state has a strong impact on the dominant crystallographic phase, microstructure, surface morphology, and electrical resistivity of AuTa 4 films. This is due to effects of changes in the confining magnetic field with target erosion on the HiPIMS discharge characteristics and the sputter source output. We quantify these effects via plasma diagnostics and discuss the optimization of HiPIMS deposition of ultrathick films for cases when target erosion effects dominate film properties.

36 MATERIALS SCIENCE↗

A review of fluids under nanoconfinement: Reactivity, geomechanics, phase transitions, and flow

Due to its many industrial applications, the physics associated with the nanoconfinement of fluids has garnered great attention from the scientific community in roughly the last fifteen years. One pioneer of that research has been the Multi-Scale Fluid-Solid Interactions in Architected and Natural Materials (MUSE) Energy Frontier Research Center, which produced more than 50 journal articles from 2018 to 2023. We structure the findings of MUSE into four categories and contextualize the work with the broader literature. Here, the four categories are (1) the dependence of chemical reactions on the degree of confinement, which given the lower freedom of motion of molecules yet improved availability of reaction sites generally lead to enhancement from bulk reactions; (2) the mechanical properties of the porous matrix, which are dependent on the heterogeneity of the system in terms of both composition and structure; (3) the phase transitions under nanoconfinement, which are influenced by the pore size and morphology, surface chemistry, and substrate composition; and (4) the physical controls of slip flow, which demonstrate the importance of several factors, such as wettability. These aspects of nanoconfinement are becoming clearer, but there are other elements such as mathematical theory that are still being developed.

58 GEOSCIENCES↗

Molecular beam epitaxy growth of IrO 2 using plasma-only oxidation

Growth of IrO 2 films via molecular beam epitaxy (MBE) using an oxygen plasma as the sole oxidant is demonstrated for the first time. We investigate the oxidizing conditions required for IrO 2 by characterizing the species present in the plasma using optical emission spectroscopy and comparing the thermodynamic equilibrium between Ir/IrO 2 under atomic and molecular oxygen. Across the pressure range accessible, monatomic oxygen was the primary reactive species present in the plasma. IrO 2 films were grown under varying Ir flux, oxygen pressure, and substrate temperature to understand growth thermodynamics and kinetics. Structural characterization assessed film phase and composition, crystallinity, strain, and surface morphology. The optimized films from this study validate plasma-only reactive growth by MBE as a successful method for growing IrO 2 .

36 MATERIALS SCIENCE↗

Stimulated emission of AlGaN layers grown on sapphire substrates using ammonia molecular beam epitaxy

By optimising the growth temperature of the AlGaN layers and using high-temperature AlN buffer layers, high-quality Al{sub x}Ga{sub 1 – x}N layers (x = 0.15, 0.21, 0.26, and 0.3) were obtained, in which stimulated emission in the UV spectral range 330 – 297 nm was implemented with the threshold intensity of excitation I{sub th} ≈ 0.7 – 1.4 MW cm{sup −2}, respectively. It is found that the threshold value of the stimulated emission of AlGaN layers grown by molecular beam epitaxy is largely determined by the intensity of the process of thermal decomposition of GaN, which affects the surface morphology and, consequently, the amount of optical scattering loss. It is shown that no pronounced localisation of nonequilibrium charge carriers occurs in the AlGaN layers, which is manifested in the absence of a large Stokes shift and in the realisation of optical amplification at transitions in an electron-hole plasma, and also indicates a relatively homogeneous material composition. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Defect tolerance and the effect of structural inhomogeneity in plasmonic DNA-nanoparticle superlattices

Significance Materials constructed with metal nanoparticles interact strongly with light, enabling functions such as tunable color, molecular sensors, and light-based electronics. These materials, however, are often imperfect; nanoparticles vary in their size, shape, and surface morphology, which can affect the quality of their arrangement as well as their properties. We use DNA to synthesize precisely controlled crystalline arrangements of gold nanoparticles and survey how a variety of structural inhomogeneities affects their optical properties. The results reported herein identify specific metal nanoparticle-based materials whose optical properties are either sensitive or insensitive to inhomogeneity.

36 MATERIALS SCIENCE↗

Three-Dimensional Heat Flux and Thermal Analysis of Angled Tungsten Samples on DIII-D

ITER-grade tungsten and dispersoid-strengthened tungsten samples with the top surface angled at ~15° towards the incident plasma flux were exposed to 9 H-mode discharges with edge-localized modes (ELMs) in the lower divertor of DIII-D tokamak using the Divertor Material Evaluation System (DiMES). Surface damage included cracking and flaking of material on the two samples farthest away from the plasma strike point, and significant melting of the two samples closest to the strike point. Heat flux and thermal analysis tools new to DIII-D have been applied to better understand this material response and to help optimize the exposure conditions for future experiments. SMITER field-line tracing simulations based on IRTV data and EFIT equilibria estimate an average inter-ELM perpendicular heat flux, 𝑞⊥,𝑖nter−𝐸LM , on the angled surfaces of 10.1 – 19.6 MW/m² for a majority of the 9 discharges, increasing to 15.6 – 24.5 MW/m² for the single, higher-power shot where samples melted. Fast camera data showed shallow intra-ELM melting and re-solidification, which transitioned to bulk inter-ELM melting with melt motion in the 𝐽⃗ 𝑥 𝐵⃗ direction. About 50% of the protruding volume of the most affected sample was displaced via melt-motion. SIERRA thermal modeling software was able to reproduce an onset time of melting consistent with fast camera data and final sample conditions, within < 200 ms. Maximum surface temperatures of 3122 K and 2787 K are estimated for the samples farthest away from the strike point, while the closest samples achieve melting at 4067 ms and 4750 ms into the ~5000 ms plasma exposure. A +10% increase in both the SMITER 𝑞⊥,𝑖nter−𝐸LM calculations and the estimated ELM heat loads 𝑞⊥, 𝐸LM was required to achieve this result, which is within the uncertainty of the diagnostic data but likely accounts for non-ideal geometry effects plus other physics uncertainties not included in this first iteration of modeling. This work provided valuable estimates of the 3D temperature evolution to help better understand the observed surface morphology and internal recrystallization of samples, which are discussed in detail in a complementary manuscript [1]. Benchmarking efforts with more diagnosed DIII-D experiments are underway to further refine the SMITER and SIERRA models for DiMES. Future use of these tools will enable researchers to precisely target heat flux exposure conditions in DIII-D to test, but not exceed, the thermomechanical limitations of novel plasma-facing materials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma Focused Ion Beam Milling of High-Aspect-Ratio Holes in Diamond

Plasma focused ion beam (PFIB) technology has a great potential for applications requiring rapid micro-machining of high-aspect-ratio features. Here, we use 30-keV Ar, Xe, and O 2 ion beams to study PFIB milling of high-aspect-ratio circular holes in polycrystalline diamond. Our results show that Xe and O 2 ion beams have the highest milling efficiency for low-aspect-ratio and high-aspect-ratio hole milling, respectively. Each ion beam species produces holes with its characteristic shape and wall surface morphology. In conclusion, based on these results, we demonstrate a “hybrid” hole milled in a two-step process with Xe and O 2 ion beams with the geometry and wall morphology attractive for the attachment of a fuel fill tube to the inertial confinement fusion capsule.

ICF targets↗

Resolution theory and static- and frequency dependent cross-talk in piezoresponse force microscopy

Probing materials functionality locally by scanning probe microscopy requires reliable framework for identifying the target signal and separating it from the effects of surface morphology and instrument non-idealities, i.e. instrumental and topographical cross-talk. Here we develop the linear resolution theory framework to describe the cross-talk effects, and apply it for elucidation of frequency dependent cross-talk mechanisms in the Piezoresponse Force Microscopy. The use of band excitation method allows electromechanical/electrical and mechanical/topographic signals to be unambiguously separated. The applicability of functional fit approach and multivariate statistical analysis methods for data identification in band excitation SPM is explored.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Bias assisted scanning probe microscopy direct write lithography enables local oxygen enrichment of lanthanum cuprates thin films

Here, scanning probe bias techniques have been used as a method to locally dope thin epitaxial films of La 2 CuO 4 (LCO) fabricated by pulsed laser deposition. The local electrochemical oxidation of LCO very efficiently introduces interstitial oxygen defects in the thin film. Details on the influence of the tip voltage bias and environmental conditions on the surface morphology have been investigated. The results show that a local uptake of oxygen occurs in the oxidized films.

36 MATERIALS SCIENCE↗

Study of carbon nanotube embedded honey as a resistive switching material

In this paper, natural organic honey embedded with carbon nanotubes (CNTs) was studied as a resistive switching material for biodegradable nonvolatile memory in emerging neuromorphic systems. CNTs were dispersed in a honey-water solution with the concentration of 0.2 wt% CNT and 30 wt% honey. The final honey-CNT-water mixture was spin-coated and dried into a thin film sandwiched in between Cu bottom electrode and Al top electrode to form a honey-CNT based resistive switching memory (RSM). Surface morphology, electrical characteristics and current conduction mechanism were investigated. The results show that although CNTs formed agglomerations in the dried honey-CNT film, both switching speed and the stability in SET and RESET process of honey-CNT RSM were improved. The mechanism of current conduction in CNT is governed by Ohm’s law in low-resistance state and the low-voltage range in high-resistance state, but transits to the space charge limited conduction at high voltages approaching the SET voltage.

36 MATERIALS SCIENCE↗

Vapor annealing synthesis of non-epitaxial MgB 2 films on glassy carbon

Here, we describe the fabrication and characterization of 25–800 nm thick MgB 2 films on glassy carbon substrates by Mg vapor annealing of sputter-deposited amorphous B films. Results demonstrate a critical role of both the initial B film thickness and the temperature–time profile on the microstructure, elemental composition, and superconducting properties of the resultant MgB 2 films. Films with thicknesses of 55 nm and below exhibit a smooth surface, with a roughness of 1.1 nm, while thicker films have surface morphology consisting of elongated nano-crystallites. The suppression of the superconducting transition temperature for thin films scales linearly with the oxygen impurity concentration and also correlates with the amount of lattice disorder probed by Raman scattering. The best results are obtained by a rapid (12 min) anneal at 850°C with large temperature ramp and cooling rates of ~540°C min -1 . Such fast processing suppresses the deleterious oxygen uptake.

36 MATERIALS SCIENCE↗

Investigations in the tape-to-tape contact resistance and contact composition in superconducting CORC ® wires

Conductor on Round Core (CORC®) wires and cables, constructed from multiple layers of helically wound REBa 2 Cu 3 O 7–δ tapes, are a promising cable technology for high field magnet applications. An important feature of high-temperature superconductor cables is the ability to share current between conductors, allowing current to bypass drops in I c and minimizing the risk of hot spot formation, which could lead to potential burnout in the superconductor. In contrast to stacked-tape cables, which have continuous contact between tapes, in CORC® the transfer points occur at discrete tape crossovers. The tape-to-tape contact resistance, R c , plays a critical role in the current sharing capabilities and current distribution in cables. For the work reported here, special CORC® wires were manufactured using different winding parameters to investigate variations in R c . Variations comprised inclusion of a lubricant, different lubricant conductivity, inclusion of pre-tinning, and heating briefly to melt the solder. Cables were first tested as straight lengths, followed by bending to a 10 cm diameter. In straight cables R c values ranged from 1 to over 1000 μΩ cm 2 , depending on cabling parameters, with the highest values being found for cables made by the present 'standard' process. Bending the cables to a 10 cm diameter decreased R c by a factor 2–5. Tinning with PbSn decreased R c by three orders of magnitude compared to standard CORC® wires, and heat treating wires with tinned conductor resulted in only a small further decrease in R c . Based on the measured R c at an electric field of 1 μV cm –1 the resulting current transfer length between layers can range from a few millimeters to a tens of centimeters. Examination of contacts with a laser confocal microscope showed plastic deformation of the copper at the edges of the contact overlap area, apparently caused by thicker plating at tape edges digging into the copper of neighboring layers. These images reveal that only a fraction of the total contact surface may actually be touching when there is nothing to compensate for height differential. Images of the PbSn coated tapes indicated that application of solder produces a much more uniform contact surface and higher contact area. Furthermore, imaging of CORC® cross-sections confirmed that in the non-tinned cables there are many regions where tapes are not in contact, while in contrast the PbSn cable shows significantly more contact between the tapes. These different imaging techniques reveal that tape surface morphology is a significant parameter in determining R c .

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Evaluation of silicon carbide as a divertor armor material in DIII-D H-mode discharges

Silicon carbide (SiC) represents a promising but largely untested plasma-facing material (PFM) for next-step fusion devices. In this work, an analytic mixed-material erosion model is developed by calculating the physical (via SDTrimSP) and chemical (via empirical scalings) sputtering yield from SiC, Si, and C. The Si content in the near-surface SiC layer is predicted to increase during D plasma bombardment due to more efficient physical and chemical sputtering of C relative to Si. Silicon erosion from SiC thereby occurs primarily from sputtering of the enriched Si layer, rather than directly from the SiC itself. SiC coatings on ATJ graphite, manufactured via chemical vapor deposition, were exposed to repeated H-mode plasma discharges in the DIII-D tokamak to test this model. The qualitative trends from analytic modeling are reproduced by the experimental measurements, obtained via spectroscopic inference using the S/XB method. Quantitatively the model slightly under-predicts measured erosion rates, which is attributed to uncertainties in the ion impact angle distribution, as well as the effect of edge-localized modes. After exposure, minimal changes to the macroscopic or microscopic surface morphology of the SiC coatings were observed. Compositional analysis reveals Si enrichment of about 10%, in line with expectations from the erosion model. Extrapolating to a DEMO-type device, an order-of-magnitude decrease in impurity sourcing, and up to a factor of 2 decrease in impurity radiation, is expected with SiC walls, relative to graphite, if low C plasma impurity content can be achieved. Furthermore, these favorable erosion properties motivate further investigations of SiC as a low-Z, non-metallic PFM.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct sulfation of limestone based on oxy-fuel combustion technology

With limestone as the sorbent, the sulfation reaction can proceed via two different routes depending on whether calcination of the limestone takes place under the given reaction conditions. The direct sulfation reaction is defined as the sulfation reaction between sulfur dioxide (SO{sub 2}) and limestone in an uncalcined state. This reaction, based on oxyfuel combustion technology, was studied by thermogravimetric analysis. Surface morphologies of the limestone particles after sulfation were examined by a scanning electron microscope. Results show that there are more pores or gaps in the product layer formed by direct sulfation of limestone than by indirect sulfation, which can be attributed to the generation of carbon dioxide (CO{sub 2}) at a reaction interface. Compared with indirect sulfation, direct sulfation of limestone can yield much higher conversion and has a much higher reaction rate. For direct sulfation, the greater porosity in the product layer greatly reduces the solid-state ion diffusion distance, resulting in a higher reaction rate and higher conversion.

01 COAL, LIGNITE, AND PEAT↗

Modulating effect of evanescent waves on thin film growth

Atomic-scale smooth thin films are keys to successful integration and proper function of many multilayer-structured devices. However, the intrinsic islandlike growth mode prevents human beings from realizing such ultrasmooth films of many important functional materials. To solve this problem, we propose a negative entropy-infusing method that employs evanescent waves to enhance the downward interlayer diffusion of adatoms and thus transform the islandlike growth mode to the layer-by-layer growth mode. In this work, the formulas of the optical force and the lowered diffusion barrier were derived, and the application of this theory on a simplified example demonstrates significantly improved surface morphologies through numerical simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Basal-plane growth of cadmium arsenide by molecular beam epitaxy

(001)-oriented thin films of the three-dimensional Dirac semimetal cadmium arsenide can realize a quantum spin Hall insulator and other kinds of topological physics, all within the flexible architecture of epitaxial heterostructures. Here, we report a method for growing (001) cadmium arsenide films using molecular beam epitaxy. The introduction of a thin indium arsenide wetting layer improves surface morphology and structural characteristics, as measured by x-ray diffraction and reflectivity, atomic force microscopy, and scanning transmission electron microscopy. The electron mobility of 50-nm-thick films is found to be 9300cm 2 /Vs at 2 K, comparable to the highest-quality films grown in the conventional (112) orientation. This work demonstrates a simple experimental framework for exploring topological phases that are predicted to exist in proximity to the three-dimensional Dirac semimetal phase.

36 MATERIALS SCIENCE↗

Epitaxial stabilization of thin films of the frustrated Ge-based spinels

Frustrated magnets can host numerous exotic many-body quantum and topological phenomena. GeNi 2 O 4 is a three-dimensional S=1 frustrated magnet with an unusual two-stage transition to the two-dimensional antiferromagnetic ground state, while GeCu 2 O 4 is a high-pressure phase with a strongly tetragonally elongated spinel structure and magnetic lattice formed by S=1/2 CuO 2 linear chains with frustrated interchain exchange interactions and exotic magnetic behavior. Here, we report on the thin-film epitaxial stabilization of these two compounds. The developed growth mode, surface morphology, crystal structure, and copper valence state were characterized by in situ reflection high-energy electron diffraction, atomic force microscopy, x-ray reflectivity, x-ray diffraction, x-ray photoelectron spectroscopy, and resonant x-ray absorption spectroscopy. Our results pave an alternative route to the comprehensive investigation of the puzzling magnetic properties of these compounds and the exploration of emergent features driven by strain.

36 MATERIALS SCIENCE↗

Controlling structural phases of Sn through lattice engineering

Topology and superconductivity, two distinct phenomena, offer unique insight into quantum properties and their applications in quantum technologies, spintronics, and sustainable energy technologies. Tin (Sn) plays a pivotal role here as an element because of its two structural phases, α-Sn exhibiting topological characteristics and β-Sn showing superconductivity. Here, we demonstrate precise control of these phases in Sn thin films using molecular beam epitaxy with systematically varied lattice parameters of the buffer layer. The Sn films exhibit either β-Sn or α-Sn phases as the buffer layer's lattice constant varies from 6.10 Å to 6.48 Å, spanning the range from GaSb (like InAs) to InSb. Further, the crystal structures of α- and β-Sn films are characterized by x-ray diffraction and confirmed by Raman spectroscopy and scanning transmission electron microscopy. Atomic force microscopy validates the smooth, continuous surface morphology. Electrical transport measurements further verify the phases: resistance drop near 3.7 K for β-Sn superconductivity and Shubnikov-de Haas oscillations for α-Sn topological characteristics. Density functional theory shows that α-Sn is stable under tensile strain and β-Sn under compressive strain, aligning well with experimental findings. Hence, this study introduces a platform controlling Sn phases through lattice engineering, enabling innovative applications in quantum technologies and beyond.

36 MATERIALS SCIENCE↗