Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Perovskite Solar Cells: Addressing Low Cost, High Efficiency, and Reliability Through Novel Hole-Transport Materials

The ultimate goal of this project is to develop low-cost and scalable organic-based hole transport materials that will lead to thin film perovskite solar cells with high efficiencies (>25%) and long lifetimes (>20 years). A very important component of a perovskite solar cell is the hole transport layer (HTL). This layer is also generally the most expensive and problematic component of the device. Currently the state-of-the-art HTL is based on a lithium salt doped aromatic amine termed N 2 ,N 2 ,N 2' ,N 2' ,N 7 ,N 7 ,N 7' ,N 7' -octakis(4-methoxyphenyl)-9,9'-spirobi[9H-fluorene]-2,2',7,7'-tetramine (spiro-OMeTAD) that is very difficult to prepare with no paths for becoming cost effective at high volume. This project will directly prepare perovskite solar cells more easily commercialized by designing and preparing new HTL materials with properties that address the current bottlenecks, such as cost, tunable conductivity and energy levels, hydrophobicity, Li free dopants, and stability to name a few. We have preliminary results from new cost-effective HTLs and dopants that have led to high efficiency (>19%) and long operating lifetime devices without encapsulation – significantly improved over spiro-OMeTAD based devices prepared in our labs as controls. We will focus on using the lessons learned from that first departure from the norm to design even more ideal and scalable HTLs. We believe the outcomes of this proposal will lead to a substantial impact for the perovskite community to develop a low cost, scalable and high performing HTL. This will be a collaborative effort where our synthetic chemists will perform HTL design, chemical synthesis, and materials characterization, while our device engineers will perform device physics, fabrication/processing, and characterization.

14 SOLAR ENERGY↗

Development of Agile and Cost Effective Routes for Manufacturing Reliable Ceramic Components for SOFC Systems

Additive manufacturing routes were explored and developed to enable the low to medium volume manufacturing of ceramic components with a short lead time, flexibility for iterative design, and without the high CAPEX and tooling costs associated with green machining or injection molding. Agile manufacturing route of gelcasting and 3D printing were selected and work focused on the production of ceramic manifold components utilized in the balance of plant for Saint-Gobain’s all ceramic SOFC stack. This work showed that both gelcasting and a specific version of 3D printing were able to create parts with the proper fidelity and at lower cost than traditional powder processing followed by green machining.

36 MATERIALS SCIENCE↗

An Initial Investigation of the Design Challenges Associated with Reliable 100GigE Packet Capture

Network security researchers often rely on Emulytics TM to provide a way to evaluate the safety and security of real world systems. This work involves running a large number of virtual machines on a distributed platform to observe how software and hardware will respond to different types of attacks. While Emulytics TM software such as minimega provide a scalable system for conducting experiments, the sheer volume of network traffic produced in an experiment can easily exceed the rate at which data can be recorded for offline analysis. As such, researchers must perform live analytics, narrow their monitoring scope or accept that they must run an experiment multiple times to capture all the information they require. In support of Sandia's commitment to Emulytics TM , we are developing new storage components for the Carlin cluster that will enable researchers to capture significantly more network traffic from their experiments. This report provides a summary of Haoda Wang's initial investigation of how new AMD Epyc storage nodes can be adapted to perform packet capture at 100Gbps speeds with minimal loss. This work found that the NVMe storage capabilities of the Epyc architecture are suitable for capturing 100Gbps Ethernet traffic. While capturing traffic with existing libraries was surprisingly challenging, we were able to develop a DPDK-based software tool that recorded network traffic to disk with minimal packet loss.

97 MATHEMATICS AND COMPUTING↗

Reliability of Aging Polymer Components

A viscoelastic constitutive analysis is used to investigate the counter-intuitive observation of “mobility decrease with increased deformation through yield” in a glass forming polymer under compressive and tensile loading conditions. Current Sandia National Laboratory polymer models are built on the assumption that deformation enhances the mobility of the material. If this assumption is not true at small strain rates (e.g., thermal fluctuations in stockpile storage) then models will not be able to accurately predict stress evolution and potential failure of components during stockpile storage. The behavior of an epoxy thermoset is explored using an extensively validated material “clock” model, the Simplified Potential Energy Clock (SPEC) model. This methodology allows for a comparison between the linear viscoelastic (LVE) limit and the true non-linear viscoelastic (NLVE) representation and enables exploration of a wide range of conditions that are not practical to explore experimentally. The model predicts the behavior described as “mobility decrease with increased deformation” in the LVE limit and at low strain rates for NLVE. Only when loading rates are sufficient to decrease the material shift factor by multiple orders of magnitude is the anticipated deformation induced mobility or “mobility increase with increased deformation” observed. While the model has not been “trained” for these behaviors, it also predicts that the normalized stress relaxation response is indistinguishable amongst strain levels in the “post-yield” region as has been experimentally reported. At long time, which has not been examined experimentally, the model predicts the normalized relaxation curves “crossover” and return to the LVE ordering. These findings further demonstrate the ability of rheologically simple models to represent experimentally measured material response and present predictions at long time scales that could be tested experimentally.

42 ENGINEERING↗

Smart Electric Vehicle Charging for a Reliable and Resilient Grid (Sandia National Laboratories)

Adoption of plug-in electric vehicles (PEVs) has expanded over the last few years, yet introduction of PEV smart charging has been stalled due to barriers in communication, controls, and an unclear method for determining the value PEVs will bring to the grid. This project will consider the grid impact of a variety of future scenarios, including adoption of different vehicle types, proliferation of extreme fast charging (xFC), expanded adoption of distributed energy resources (DER), and multiple smart charge management approaches. This project will determine how PEV charging at scale should be managed to avoid negative grid impacts, allow for critical strategies and technologies to be developed, and increase the value for PEV owners, building managers, charge network operators, grid services aggregators, and utilities.

33 ADVANCED PROPULSION SYSTEMS↗

Development of Agile and Cost Effective Routes for Manufacturing Reliable Ceramic Components for SOFC Systems (Final Report)

Additive manufacturing routes were explored and developed to enable the low to medium volume manufacturing of ceramic components with a short lead time, flexibility for iterative design, and without the high CAPEX and tooling costs associated with green machining or injection molding. Agile manufacturing route of gelcasting and 3D printing were selected and work focused on the production of ceramic manifold components utilized in the balance of plant for Saint-Gobain’s all-ceramic SOFC stack. This work showed that both gelcasting and a specific version of 3D printing were able to create parts with the proper fidelity and at lower cost than traditional powder processing followed by green machining.

03 NATURAL GAS↗

Development of Agile and Cost Effective Routes for Manufacturing Reliable Ceramic Components for SOFC Systems (Final Scientific Report Updated)

Additive manufacturing routes were explored and developed to enable the low to medium volume manufacturing of ceramic components with a short lead time, flexibility for iterative design, and without the high CAPEX and tooling costs associated with green machining or injection molding. Agile manufacturing route of gelcasting and 3D printing were selected and work focused on the production of ceramic manifold components utilized in the balance of plant for Saint-Gobain’s all-ceramic SOFC stack. This work showed that both gelcasting and a specific version of 3D printing were able to create parts with the proper fidelity and at lower cost than traditional powder processing followed by green machining.

36 MATERIALS SCIENCE↗

Reliability, Resilience, and the Oncoming Wave of Retiring Baseload Units, Volume II-B: Electricity Generation Supply Chain in the Northeast

This study follows upon and expands upon the previously published NETL reports that examined the performance of electricity generation units during the winter storm and cold weather event known as the “Bomb Cyclone” that occurred in early 2018. This study reviews the performance of slated and at-risk for retirement coal plants during the Bomb Cyclone, natural gas price volatility, and the role of energy and fuel storage.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Progress Report 2018: Innovation Through Collaboration - Securing a More Affordable and Reliable Energy Future

This annual report from the Better Buildings Initiative contains information about partner projects, energy and cost savings, and new program initiatives. The 2018 Progress Report also recognizes the latest group of Better Buildings Goal Achievers - organizations who have met their energy, water, and/or financing commitments under the Better Buildings or Better Plants Challenge.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Multi-Gas Sensors for Enhanced Reliability of SOFC Operation

GE Research, in partnership with SUNY Polytechnic Institute (SUNY Poly), designed, built, and tested gas sensors for in situ monitoring of H 2 and CO anode tail gases produced with on-site steam reforming in solid oxide fuel cell (SOFC) systems. The knowledge of the H 2 /CO ratio of these anode tail gases should allow accurate determination and control of the efficiency of the reforming process in the SOFC system and should deliver a lower operating cost for SOFC customers. The project objectives were to achieve multi-gas monitoring capability with a single multivariable sensor, and to sustain this performance in the presence of gaseous interferences and a potential poison for the sensor. The duration of the project was 24 months with the project structure that included three technical tasks such as (1) development of design rules of photonic nanostructures for H 2 and CO gas detection, (2) laboratory validation of photonic nanostructures for selective H 2 and CO gas detection, and (3) validation of photonic nanostructures for initial stability and poison-resistance against H 2 S. To build multivariable sensors for selective H 2 and CO gas detection in the presence of interferences, we expanded our earlier knowledge of multi-gas sensors into new fabrication and functionalization methodologies as well as into new methodologies for the spectral data analysis of multi-gas responses. We have advanced our design rules of the three-dimensional (3D) photonic nanostructures that allowed detection of H 2 and CO at high temperatures as individual gases and as their mixtures and rejection of interferences such as CO 2 , H 2 O, CH 4 , and other hydrocarbons for SOFC applications. Our advanced design rules should be attractive for building the new generation of cost-effective industrial sensors. Stability and poison resistance of our 3D photonic nanostructures was tested in the laboratory conditions. While initially we utilized conventional machine learning data analysis tools, we have found that they were unable to correct for the sensor drift. Thus, we have implemented new methods of machine learning for the analysis of our spectral data. These learnings pave the way to move the future studies into advanced testing of effects of interferences, aging and field tests. In future, our work will continue to advance our sensing designs to operate in conditions with known and unknown interferences by implementing nanostructures with enhanced spectral diversity of responses to gaseous species of interest and interferences. Our systematic reduction of technical risks in this completed project and in future studies will ensure transition of this sensing technology to commercialization.

03 NATURAL GAS↗

Co-Optimization of Boost Converter Reliability and Volumetric Power Density [Brief]

Optimized designs were achieved using a genetic algorithm to evaluate multi-objective trade space, including Mean-Time-Between-Failure (MTBF) and volumetric power density. This work provides a foundational platform that can be used to optimize additional power converters, such as an inverter for the EV traction drive system as well as trade-offs in thermal management due to the use of different device substrate materials.

33 ADVANCED PROPULSION SYSTEMS↗

A Tool-Suite to Improve Reliability and Performance of Combined Transmission-Distribution Under High Solar Penetration

The main motivating factor behind the work is to study the interaction between the transmission and the distribution system in more detail than currently possible. This is particularly important at high PV penetration levels. The developed toolkit allows capturing the coupling between the transmission and the distribution system (T&D) for steady-state and dynamic analysis, thereby furthering our understanding of how the T&D systems interact. One of the objectives of the work is to answer the question, “which analysis require T&D simulation”. To this end, the team held discussions with the utility advisory group (UAG) and identified use cases that are of most interest and studied them in detail. Based on the use cases the team was able to suggest whether the T&D analysis is a necessity for a particular study. The developed techniques, which are documented in detail through publications, are important additions to the literature in power system co-simulation. The publications and the open sourced tools (PFLOW and IGMS) that resulted from this project are highly valuable resources to the researchers in this area.

14 SOLAR ENERGY↗

Development of Predictive Models for Fleet Reliability in the Aircraft Industry

Population and sample databases were created with FAA Airworthiness Directives (AD) from 2000 to 2017 to identify failure points in the aircraft industry. Three linear models were created using these databases to find trends that could inform decision makers about the general nature of fleet recalls. The first relates the percent of the fleet affected to the subsystem listed in the AD, the second relates the severity of damage to the aircraft with respect to the subsystem of the aircraft, and the third relates the age of the aircraft to the time of the AD. These models concluded that younger aircraft experience more severe recalls, for all aircraft the severity of damage decreased as more of the fleet was affected by an AD, and active systems experience more severe ADs than passive systems. These trends show that there are significant relationships that exist that can be used in other areas of design.

42 ENGINEERING↗

Enhancing Reliability of Classified Shipments Between the Nuclear Security Enterprise

The extent of this project, as related to by the Nuclear Security Enterprise (NSE), is related to the current shipping and logistical issues and optimization opportunities between several different NSE sites that are the basis of the enterprise. This current scope is part of every site’s, described as Design Agency (DA) and Production Agency (PA), normal operation to meet the needs and mission of the National Nuclear Security Administration (NNSA). The NSE has a broad mission scope encompassing several differing DA and PA sites to meet the NNSA’s mission. These sites require frequent interaction and shipments of material and items between one another in order to meet the mission needs of the enterprise. Currently, there is no methodology that integrates schedules, standards, orders, processes, and best practices to optimize transfers between the differing sites. A centralized location and standard shipping process will optimize and improve the systems behavior, reducing lag time and increasing throughput at sites today. Ultimately this project proposes a central logistical platform, tiered escalation process, and standardized shipping forms to reduce taxpayer costs to meet the NSE’s mission more efficiently. This increase in processing logistics and process accuracy of shipments will save the NSE, not only from a monetary value, but it will reduce the frustrations of individuals working these outdated and over processed systems to improve their quality of life.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

EdgeAI: How to Use AI to Collect Reliable and Relevant Watershed Data

Focal Area(s): Focal areas are on data acquisition and assimilation enabled by AI, advanced methods including experimental/network design/optimization, unsupervised learning (including deep learning), and hardware-related efforts involving AI (e.g., edge computing). Science Challenge: The transformational science challenge that we address is the following: – Ensuring, in near real-time, that the data collected from distributed sensor networks is accurate and contains useful information to identify, quantify, and predict watershed and ecosystem dynamic responses to short- and long-term perturbations.

54 ENVIRONMENTAL SCIENCES↗

Reliable modeling and prediction of precipitation & radiation for mountainous hydrology

This White Paper focuses on data-driven atmospheric process model emulation and atmospheric process surrogate model development. It proposes leveraging recent AI advances in these approaches to fill in unavoidable observational gaps and enable high-fidelity modeling/predictability of the atmosphere and land-surface interactions in mountainous watersheds. This approach will support studies and predictability of water cycle extremes.

54 ENVIRONMENTAL SCIENCES↗

Water Cycle-Driven Infectious Diseases as Multiscale, Reliable, Continuously Updating Water Cycle Sensors

We propose a novel synthesis of observational and simulated data (climatological and biological) to enhance understanding of the real-world interplay between climate (here, the water cycle) and the epidemiology of water cycle-driven infectious disease. Aligning with Focal Area 2, predictive modeling using AI techniques, we will develop systems of hierarchical models to discover latent features of the water cycle. Our approach will leverage state-of-the-art in Artificial Intelligence (AI) to measure the degree to which climate change-driven shifts in water cycle can be predicted by supplementing sparse and irregular climate data with water cycle-driven infectious disease resources.

54 ENVIRONMENTAL SCIENCES↗