Search NASA⌕ Search

SEARCH · Search NASA

Results for “BALLISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Structural aspects of Imbrium sculpture, part G

Apollo 16 metric photographs taken at low to high sun angles provided the first stereographic coverage of the distinctive landforms collectively referred to as Imbrium sculpture. The sculpture consists of a series of nearly linear ridges and troughs extending radially outward for more than 1000 km from the rim of the Imbrium Basin. The origin of the ridges and troughs, whether by deposition and impact scoring by fluidized clouds of ejecta from the Imbrium Basin or by faulting and volcanism during and subsequent to basin formation, is controversial. Evidence indicative of the mode of origin of Imbrium sculpture is summarized as follows. Evidence of volcano-tectonic mode of origin is favored by: (1) wide variation in relative age of parts of the sculpture; (2) furrows without rims; (3) absence of ballistic shielding; (4) asymmetry of sculpture; (5) absence of randomly oriented clusters; and (6) association with other features of structural origin. An origin by ejecta scoring and deposition is favored by the gradational ejecta with a Fra Mauro-type texture. Features that are ambiguous as to mode or origin are furrows made of coalesced crater chains and prominent rims on furrows.

Scott, D. H.↗

Design assurance test of the Thiokol Te-M-521-5 apogee kick motor tested in the spin mode at simulated altitude conditions

One Thiokol Chemical Corporation TE-M-521-5 solid-propellant apogee rocket motor was successfully fired at an average simulated altitude of about 108,000 ft while spinning at 46 rpm. The general program objectives were to verify compliance of motor performance with the manufacturer's specifications. Specific primary objectives were to determine vacuum ballistic performance of the motor after prefire vibration conditioning and temperature conditioning at 40F, altitude ignition characteristics, motor structural integrity, and motor temperature-time history during and after motor operation. Additional objectives were to measure the lateral (nonaxial) thrust component during motor operation and to measure radiation heat flux in the vicinity of the nozzle exit plane.

Cimino, A. A.↗

Si(Li) position sensitive detector

A position sensitive detector was made using the lithium diffused layer of a lithium-drifted-silicon detector as the uniform resistive layer. An expression is derived for estimating the resistance from the thickness of the lithium layer. Expressions for the noise and ballistic deficit for single differentiation-double integration pulse shaping are presented. Room temperature data for a 1 Mev proton beam on a 45 mm long detector shows that the linearity is better than .05% and that the position resolution is 1.06 + or - .05 mm.

Gigante, J. R.↗

Test stand for precise measurement of impulse and thrust vector of small attitude control jets

A test stand which accurately measures the impulse bit and thrust vector of reaction jet thrusters used in the attitude control system of space vehicles has been developed. It can be used to measure, in a vacuum or ambient environment, both impulse and thrust vector of reaction jet thrusters using hydrazine or inert gas propellants. The ballistic pendulum configuration was selected because of its accuracy, simplicity, and versatility. The pendulum is mounted on flexure pivots rotating about a vertical axis at the center of its mass. The test stand has the following measurement capabilities: impulse of 0.00004 to 4.4 N-sec (0.00001 to 1.0 lb-sec) with a pulse duration of 0.5 msec to 1 sec; static thrust of 0.22 to 22 N (0.05 to 5 lb) with a 5 percent resolution; and thrust angle alinement of 0.22 to 22 N (0.05 to 5 lb) thrusters with 0.01 deg accuracy.

Woodruff, J. R.↗

The geomorphic evolution of the lunar surface.

The solution of the function relating craters of the continuous degradation sequence with degree of erosion was defined as the geomorphic index of the area. Studies of the geomorphic index of stratigraphic surfaces show that areas covered by considerable ballistic sediments have a geomorphic index which is not a monotonic function of time. On the other hand, areas covered almost exclusively by mare flooding show an index which is a monotonic function of the age of the flooding. As each mare surface shows a considerable range in indices, it is concluded that maria are covered by surfaces formed through a considerable length of time. By using Apollo 11 and 12 radiometric ages it is suggested that the time of mare flooding lasted on the order of one billion years. The geomorphic index of highland surfaces shows a remarkable degree of order - i.e., the farther an area is inland from the mare shores, the higher will be the index. No explanation is given for this phenomenon, but it is suggested that lunar erosion is not just a localized phenomenon centered on the locus of an impact, but has lateral trends of regional dimensions.

Ronca, L. B.↗

Debye-Scherrer investigations of experimentally shocked silicates.

Small ballistic ranges were used to perform controlled laboratory shock experiments on 12 selected silicates. Debye-Scherrer investigations of shocked materials revealed a gradual lattice breakdown of crystalline matter under shock. Individual mineral species behave selectively. Sheet silicates break down very easily, followed by tecto-silicates. Chain-, ino- and ortho-silicates are of considerably higher shock resistance. Depending on the mineral species, the first sign of shock damage is evidenced in the long range order at 20-70 kb. At intermediate pressures (100-200 kb) the long range order is essentially destroyed with the short range order heavily disturbed. At pressures exceeding 300 kb tecto-silicates are completely collapsed.

Hoerz, F.↗

Adjustment of saccade characteristics during head movements.

Saccade characteristics have been studied during coordinated eye-head movements in monkeys. Amplitude, duration, and peak velocity of saccades with head turning were compared with saccades executed while the head was artificially restrained. The results indicate that the saccade characteristics are modulated as a function of head movement, hence the gaze movement (eye+head) exactly matches saccades with head fixed. Saccade modulation is achieved by way of negative vestibulo-ocular feedback. The neck proprioceptors, because of their longer latency, are effective only if the head starts moving prior to the onset of saccade. It is concluded that saccades make with head turning are not 'ballistic' movements because their trajectory is not entirely predetermined by a central command.

Morasso, P.↗

Lunar cinder cones.

Data on terrestrial eruptions of pyroclastic material and ballistic considerations suggest that in the lunar environment (vacuum and reduced gravity) low-rimmed pyroclastic rings are formed rather than the high-rimmed cinder cones so abundant on the earth. Dark blanketing deposits in the Taurus-Littrow region (Apollo 17 landing area) are interpreted as being at least partly composed of lunar counterparts of terrestrial cinder cones.

Mcgetchin, T. R.↗

Effect of energetic oxygen atoms on neutral density models.

The dissociative recombination of O2(+) and NO(+) in the F region results in the production of atomic oxygen and atomic nitrogen with substantially greater kinetic energy than the ambient atoms. In the exosphere these energetic atoms have long free paths. They can ascend to altitudes of several thousand kilometers and can travel horizontally to distances of the order of the earth's radius. The distribution of energetic oxygen atoms is derived by means of models of the ion and neutral densities for quiet and disturbed solar conditions. A distribution technique is used to study the motion of the atoms in the collision-dominated region. Ballistic trajectories are calculated in the spherical gravitational field of the earth. The present calculations show that the number densities of energetic oxygen atoms predominate over the ambient atomic oxygen densities above 1000 km under quiet solar conditions and above 1600 km under disturbed solar conditions.

Rohrbaugh, R. P.↗

Flexible fire retardant polyisocyanate modified neoprene foam

Lightweight, fire resistant foams have been developed through the modification of conventional neoprene-isocyanate foams by the addition of an alkyl halide polymer. Extensive tests have shown that the modified/neoprene-isocyanate foams are much superior in heat protection properties than the foams heretofore employed both for ballistic and ablative purposes.

Parker, J. A.↗

Summary of atmospheric data observations for 155 flight of MSFC/ABMA related aerospace vehicles

A summary of selected atmospheric conditions observed near launch time for 155 NASA-Marshall Space Flight Center and Army Ballistic Missile Agency related vehicles, launched primarilv from Cape Kennedy, Florida, between August 20, 1953, and November 16, 1963, is presented. Values of ambient pressure, temperature, relative humidity, ground winds, visual observations, density aloft, and wind/wind shear aloft are included. The extremes of these parameters are listed for each type of launch vehicle.

Johnson, D. L.↗

Environmental protection to 922K (1200 F) for titanium alloys

Evaluations are presented of potential coating systems for protection of titanium alloys from hot-salt stress-corrosion up to temperatures of 755 K (900 F) and from oxidation embrittlement up to temperature of 922 K (1200 F). Diffusion type coatings containing Si, Al, Cr, Ni or Fe as single coating elements or in various combinations were evaluated for oxidation protection, hot-salt stress-corrosion (HSSC) resistance, effects on tensile properties, fatigue properties, erosion resistance and ballistic impact resistance on an alpha and beta phase titanium alloy (Ti-6Al-2Sn-4Zr-2Mo). All of the coatings investigated demonstrated excellent oxidation protectiveness, but none of the coatings provided protection from hot-salt stress-corrosion. Experimental results indicated that both the aluminide and silicide types of coatings actually decreased the HSSC resistance of the substrate alloy. The types of coatings which have typically been used for oxidation protection of refractory metals and nickel base superalloys are not suitable for titanium alloys because they increase the susceptibility to hot-salt stress-corrosion, and that entirely new coating concepts must be developed for titanium alloy protection in advanced turbine engines.

Groves, M. T.↗

Explosive propulsion applications

The feasibility and application of an explosive propulsion concept capable of supporting future unmanned missions in the post-1980 era were examined and recommendations made for advanced technology development tasks. The Venus large lander mission was selected as the first in which the explosive propulsion concept can find application. A conceptual design was generated and its performance, weight, costs, and interaction effects determined. Comparisons were made with conventional propulsion alternatives. The feasibility of the explosive propulsion system was verified for planetology experiments within the dense atmosphere of Venus as well as the outer planets. Additionally, it was determined that the Venus large lander mission could be augmented ballistically with a significant delivery margin.

Nakamura, Y.↗

Government-Industry Data Exchange Program (GIDEP)

The Government-Industry Data Exchange Program (GIDEP) was originated in 1959 by the Army, Navy, and Air Force Ballistic Missile Agencies. Known at that time as IDEP--Interservice Data Exchange Program--its intent was to eliminate duplicate testing of parts and components by disseminating pertinent test data among Department of Defense contractors and various government agencies. In 1966 both the National Aeronautics and Space Administration and the Canadian Military Electronics Standards Agency (CAMESA) recognized the value of the data provided by the program and became participants. Today, GIDEP provides the interchange of specialized technical data to all the military services, participating government contractors and numerous government agencies such as the Atomic Energy Commission, Federal Aviation Administration, Defense Supply Agency, and the Small Business Administration.

Richards, E. T.↗

Space shuttle SRM interim contract, part 2

The characteristics of the solid rocket propellant for use with the space shuttle rocket engine are discussed. Design ramifications have created different web thicknesses and motor operating pressures which have necessitated small changes in the required propellant burning rate at 1,000 psia. However, the SRM burning rate remains well within the range demonstrated in the Poseidon and Minuteman first stage motors. Any change in propellant burning rate can be accomplished readily by a slight modification in the oxidizer particle size distribution. The ballistic and mechanical properties of the propellant remain unchanged from the baseline (Configuration 0).

Source record↗

Developing a technology base in planetary entry aerothermodynamics

The long-range objectives of the entry technology program are to insure that an adequate technology base for a great variety of mission options exists. Consideration has been given to the entry of vehicles into the atmospheres of all the planets with the exception of Pluto. The experimental facilities for the studies are discussed, giving attention to shock tubes, the planetary entry radiation facility, ballistic ranges, the expansion tube, and arc jet facilities. Flight experiments are considered along with computational analyses and engineering approximations.

Olstad, W. B.↗

Helium and hydrogen in the lunar atmosphere

Of the gas species supplied by the solar wind, only helium and hydrogen are light enough to be lost from the moon by Jeans' thermal escape mechanism. To study the behavior of helium and hydrogen, a Monte Carlo technique has been used, in which random ballistic trajectories of individual molecules are traced over a spherical moon. In the computation, a particle is 'created' on the sunlit surface, and the locations of its subsequent encounters with the surface are recorded until it escapes. Global distributions of helium and hydrogen concentrations have been computed, based on the hypothesis that the release of neutral gases from the lunar surface is confined to daytime and is correlated with the solar wind influx. The resulting helium model is in good agreement with the measurements from the Apollo 17 lunar surface mass spectrometer.

Hodges, R. R., Jr.↗