Search NASA⌕ Search

SEARCH · Search NASA

Results for “Depolymerization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Elucidation of a bacterial pathway for catabolism of the β–β-linked dilignol pinoresinol

Monolignol-derived dimers containing β–β linkages are synthesized by vascular plants and can be released during lignin depolymerization. In this work, we isolated a bacterium, Novosphingobium rhizosphaerae LY, that grows with the β–β lignan (+)-pinoresinol as a sole growth substrate. Sequence analysis suggested that this strain encodes a broad range of pathways for assimilation of aromatic monomers as well as one enzyme implicated in pinoresinol catabolism but lacks other known pathways for aromatic dimer catabolism. We constructed a genome-wide barcoded transposon library and identified genes required for pinoresinol catabolism. Using feeding studies, compound isolation, targeted synthesis, and analysis of purified enzymes, we elucidated the biochemical intermediates and reaction pathway involved in pinoresinol catabolism. We demonstrated that the first enzymatic reaction is the reductive cleavage of a furan ring in (±)-pinoresinol with retention of configuration to yield lariciresinol. We additionally confirmed that the final pathway enzyme, PinU, is related to lignostilbene dioxygenases and oxidatively cleaves a diguaiacylbutadiene intermediate to yield vanillin and coniferaldehyde. Finally, based on the enzyme characterization, we demonstrated that the strain can grow with a second β–β lignan, (–)-syringaresinol, as a sole growth substrate. In combination, these results demonstrate a new biocatalytic route for transforming a widely occurring group of plant phenylpropanoid natural products.

Novosphingobium↗

Chemically Amplified, Dry-Develop Poly(aldehyde) Photoresist

The catalytic decomposition of poly(phthalaldehyde) with a photoacid generator can be used as dry-develop photoresist, where the exposed film depolymerizes into small molecules to allow the development of features via controlled vaporization. Higher temperatures enabled shorter dry-development times, but also promoted faster photoacid diffusion that compromised pattern fidelity. Trihexylamine was used as a base quencher to counteract acid diffusion in a phthalaldehyde-propanal co-polymer photoresist. The propanal co-monomer in the polymer improves the vaporization rate because it has a higher vapor pressure than phthalaldehyde. Addition of the base quencher was found to improve the contrast, pattern fidelity, and ease-of-handling of the dry-develop resist in a direct-write UV lithography tool. The dry-development of 4 μ m features was achieved with no appreciable residue. For large area features, a spatially variable exposure method was used to direct the residue away from the exposed area. The gradient exposure method was used to produce 100 μ m features. Plasma etching after dry-development was also used to achieve residue-free dry-developed patterns. These results show the benefits of incorporating base additives into a dry-develop depolymerizable resist system and highlight the need for addressing residue formation.

Materials Science↗

Data for "Integrated Green Biorefinery for the Production of Anthocyanins, Fermentable Sugars, and High Pure Lignin from Miscanthus × giganteus "

Miscanthus x giganteus (Mxg) is a promising perennial crop for producing natural colorants, renewable fuels, and bioproducts. However, natural recalcitrance and high pretreatment cost are major barriers to their complete conversion. In this study, a green processing method has been investigated for efficient recovery of natural pigments (anthocyanins), fermentable sugars, and pure lignin from Mxg genotypes using choline chloride-based natural deep eutectic solvents (NADES) systems. Interestingly, choline chloride: lactic acid (ChCl: LA) NADES-processed biomass resulted in 67.8 ± 2.1 μg g−1 of anthocyanins from dry biomass. A maximum of 87.4%–94.1% glucose yield was achieved after enzymatic saccharification. The effective extraction of lignin with high purity with higher β-aryl ether (βO4) bonds from advanced crops is crucial for lignin valorization. Notably, highly pure lignin (≈93.4% ± 1.4%) is achieved after low-temperature NADES pretreatment while retaining lignin’s native structure. 31P nuclear magnetic resonance demonstrated that total phenolics for ChCl: LA-lignin resulted in 1.20 mmol g−1 hydroxyls. The relative monolignol composition of syringyl (S), guaiacyl (G), and p-hydroxyphenyl (H) is 19.0, 65.7, and 14.3%, respectively, as evidenced by heteronuclear single quantum coherence analysis. This study provides a novel approach for obtaining high-purity lignin for catalytic depolymerization for oligomers and bifunctional monoaromatics production and leverages current cellulosic biorefinery technologies.

biomass analytics↗

High resolution characterization of soil dissolved organic matter with FTICR-MS (Fourier-transform ion cyclotron resonance mass spectrometry) from soil samples in control and warming plots in Blodgett Forest, CA (2014 and 2018)

The pathways of carbon transport and loss through and from soils—soil organic matter (SOM) depolymerization to dissolved organic carbon and mineralization to carbon dioxide (CO2)—are fundamentally driven by microbial activity, which is strongly regulated by environmental conditions. As part of Lawrence Berkeley National Laboratory (LBNL) Terrestrial Ecosystem Science (TES) Belowground Biogeochemistry Science Focus Area (SFA), we have established a novel whole-soil long-term warming experiment at the University of California (UC) Blodgett Forest Research Station (Sierra Nevada) in 2014, where we study the role of biogeochemical, microbial and geochemical process interactions in SOM decomposition and stabilization.This package contains Fourier transform ion cyclotron resonance mass spectrometry (21 Tesla FTICR-MS) data measured in negative and positive ionization mode from water and methanol soil extracts. Soil samples were collected in 2014/06/03 and 2018/06/04 from 3 replicated paired plots that had been subjected to experimental warming since June 2014 to simulate a predicted climate change scenario for northern California. The following files are included: (1) fticr_neg_h2oMeoh_data_raw.csv: raw data from combined water (H2O) and methanol (MeOH) extracts in negative ion mode, (2) fticr_neg_h2oMeoh_data_processed.csv: processed data from combined water (H2O) and methanol (MeOH) extracts in negative ion mode, (3) fticr_neg_metadata.csv: metadata for samples/measurements in negative ion mode, (4) fticr_pos_h2oMeoh_data_raw.csv: raw data from combined water (H2O) and methanol (MeOH) extracts in positive ion mode, (5) fticr_pos_h2oMeoh_data_processed.csv: processed data from combined water (H2O) and methanol (MeOH) extracts in positive ion mode, (6) fticr_pos_metadata.csv: metadata for samples/measurements in positive ion mode.

54 ENVIRONMENTAL SCIENCES↗

Metagenome-assembled genomes from soil samples in control and warming plots in Blodgett Forest, CA (2014-2021)

The pathways of carbon transport and loss through and from soils—soil organic matter (SOM) depolymerization to dissolved organic carbon and mineralization to carbon dioxide (CO2)—are fundamentally driven by microbial activity, which is strongly regulated by environmental conditions. As part of LBNL (Lawrence Berkeley National Laboratory) TES (Terrestrial Ecosystem Science) Belowground Biogeochemistry Science Focus Area (SFA), we have established a novel whole-soil long-term warming experiment at the University of California (UC) Blodgett Forest Research Station (Sierra Nevada) in 2014, where we study the role of biogeochemical, microbial and geochemical process interactions in SOM decomposition and stabilization.Here, we present metagenome-assembled genomes (MAGs) for the bacterial and archaeal community from soil depth profiles collected from 2014 to 2021 from three paired control and warming plots. We collected soil samples across a range of depth profiles (spanning surface to 90 cm deep) from three paired control and warming plots from a temperate mixed forest in Northern California. Each paired plot had been subjected to experimental warming since June 2014 to simulate a predicted climate change scenario for northern California. 101 soil metagenomes were sequenced at JGI (Joint Genome Institute) and UCSF (University of California San Francisco) Center for Advanced Technology and can be found under the JGI (Joint Genome Institute) GOLD (Genomes Online Database) Sequencing project Gs0151586 and NCBI (National Center for Biotechnology Information) Projects PRJNA1225762 and PRJEB39497. Metagenomes were assembled using JGI (Joint Genome Institute) Metagenome Workflow (10.1128/mSystems.00804-20). For each metagenome, the assembled contigs were binned into genomes using 3 binning algorithms (cocacola, metabat, and maxbin) and the resulting bins were consolidated using dastool. The consolidated bins from all metagenomes were pooled, filtered by completeness (>50%) and contamination (<25%), and dereplicated at 99% ANI (average nucleotide identity) using dRep (https://github.com/MrOlm/drep).The dataset includes a zip file of 2321 MAG (Metagenome Assembled Genome) fasta files, the accession numbers for the underlying metagenomes, and a csv file with MAG (Metagenome Assembled Genome) quality metrics and taxonomic classification (GTDB -Genome Taxonomy Database-RS220). This dataset also includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type. A sample metadata file (samples.csv) that contains site information has also been included.

54 ENVIRONMENTAL SCIENCES↗

Untargeted, tandem mass spectrometry (LC/MS-MS) metaproteomes from soil samples in control and warming plots in Blodgett Forest, CA (2014-2021)

The pathways of carbon transport and loss through and from soils—soil organic matter (SOM) depolymerization to dissolved organic carbon and mineralization to carbon dioxide (CO2)—are fundamentally driven by microbial activity, which is strongly regulated by environmental conditions. As part of Lawrence Berkeley National Laboratory (LBNL) Terrestrial Ecosystem Science (TES) Belowground Biogeochemistry Science Focus Area (SFA), we have established a novel whole-soil long-term warming experiment at the University of California (UC) Blodgett Forest Research Station (Sierra Nevada) in 2014, where we study the role of biogeochemical, microbial and geochemical process interactions in SOM decomposition and stabilization. This package contains soil metaproteomics data in the context of site specific metagenomes from soil depth profiles in three paired control and warming plots from a temperate mixed forest in Northern California. Each paired plot had been subjected to experimental warming since June 2014 to simulate a predicted climate change scenario for northern California. These metaproteomes were collected in 2018 after 4.5 years of warming from five depth intervals (0-10 cm, 10-30 cm, 30-45 cm, 45-60 cm, 60-80 cm). For protein identification, the collected spectra were searched following a target-decoy search strategy against a database of metagenome predicted proteins (covering 96 samples from 2014 to 2021) representing the complete sequence diversity at the site. Data was searched with mass spectrometry database search tool (MS-GF+) using Pacific Northwest National Laboratory (PNNL)'s Data Management System (DMS) Processing pipeline. The metagenomes are published as part of another data package. Raw metaproteomic data and the data products from MS-GF+ are deposited in the Mass Spectrometry Interactive Virtual Environment (MassIVE) database under accession no. MSV000097826. Here we present a dataset that includes spectral counts for the detected proteins across samples (EMSL50964_BrodieAllMAGs_Globals_SC.txt), the sequences of the detected proteins, and sample metadata file that contains site information for the soil metaproteome samples.

Belowground Biogeochemistry Science Focus Area↗

1H-NMR characterization of soil dissolved organic matter from soil samples in control and warming plots in Blodgett Forest, CA (2014 and 2018)

The pathways of carbon transport and loss through and from soils—soil organic matter (SOM) depolymerization to dissolved organic carbon and mineralization to carbon dioxide (CO2)—are fundamentally driven by microbial activity, which is strongly regulated by environmental conditions. As part of Lawrence Berkeley National Laboratory Terrestrial Ecosystem Science Belowground Biogeochemistry Science Focus Area (SFA), we have established a novel whole-soil long-term warming experiment at the University of California (UC) Blodgett Forest Research Station (Sierra Nevada) in 2014, where we study the role of biogeochemical, microbial and geochemical process interactions in SOM (soil organic matter) decomposition and stabilization. This package contains metabolite data obtained through 1H nuclear magnetic resonance (NMR) spectroscopy on water-extracted soils. Soil samples were collected in 2014/06/03 and 2018/06/04 from 3 replicated paired plots that had been subjected to experimental warming since June 2014 to simulate a predicted climate change scenario for northern California. The following files are included: (1) nmr_h2o_data_raw.csv: raw data, (2) nmr_h2o_data_processed.csv: computed compound concentrations and metadata, (3) nmr_h2o_compound_metadata.csv: compound metadata, (4) nmr_h2o_sample_metadata.csv: sample metadata

1H-NMR (nucleic magnetic resonance) spectroscopy↗

AUTOIGNITION DELAY TIMES FOR REFORMATE GAS MIXTURES FROM METHANE GAS ENGINES

Methane slip is a prominent issue in natural gas reciprocating engines that are used in transportation and marine applications. The incomplete combustion that results in methane slip can be resolved with the introduction of hydrogen within the combustion mixture to improve methane oxidation and further enable combustion within the engine crevices where methane has previously remained unreacted. Steam methane reforming (SMR) is a common method used to produce hydrogen and can be used to design an onboard device to reduce methane slip from reciprocating engines. The development of this reformer device requires the validation of high-fidelity chemical kinetic models at the low temperatures of the crevice volumes of these engines. In this work, auto-ignition data is obtained using a shock tube at lean (φ—0.714 or λ—1.4) and stoichiometric (φ, λ = 1) equivalence ratios spanning a temperature range of 1042–1234 K at the 80-bar operating pressure of the test engine. Blends of methane, hydrogen, and reformate products from the SMR reaction are shock-heated in synthetic air, with the ignition delay time measured using an OH* chemiluminescence detector at 310 nm and a CH* detector at 430 nm. The experimental results are compared to several state-of-the-art chemical kinetic mechanisms from the literature. In general, most of the mechanisms show very good agreement with experiments at higher temperatures, with simulation results showing little deviation from experiments at lower temperatures. A sensitivity analysis was conducted, and the results reveal that the reaction H2 + CH3O2 = H + CH3O2H has a very significant role in determining low-temperature ignition delay times (IDTs) of SMR mixtures. These findings provide valuable insights into the chemical kinetics governing methane reformate combustion and contribute to the optimization of onboard reformer designs aimed at mitigating methane slip in natural gas-fueled engines.

Fraze, Matthew↗

Institute for Catalysis in Energy Processes (ICEP) (Final Report)

The Institute for Catalysis in Energy Processes (ICEP) was a multi-PI program located at the Northwestern University Center for Catalysis and Surface Science from 2006-2024. Over several renewal cycles and several organizing themes, ICEP addressed fundamental questions in catalysis science. In turn, the scientific questions addressed were directly relevant to the efficient use of the nation’s resources to produce fuels and commodity chemicals, harness alternate energy sources for chemical reactions such as light or electricity, reduce emissions and waste, and minimize the impact of our use of plastics. Selective oxidation, (oxidative) dehydrogenation, deNOx, CO 2 reduction, hydrogen release, polymer decomposition / depolymerization, and many other reactions of intense interest to the US Department of Energy were studied in the center. Major ICEP strengths were in catalyst synthesis, in measurements that elucidated catalyst properties, in reaction mechanisms and kinetics, and in predictive theory and modeling. ICEP researchers were often the inventors or developers of materials and methods that were brought to bear on the Institute’s catalytic systems. Key characterization tools advanced through this project included resonance Raman and related techniques, sum frequency generation, and X-ray standing wave spectroscopy. Center members relied extensively on computational tools such as density functional theory and microkinetic modeling to fully investigate catalyst structures and catalytic mechanisms. ICEP researchers were early developers of atomic layer deposition (ALD) for catalyst synthesis and were early pioneers of metal organic frameworks for catalysis. ICEP innovations are found in areas of intense research such as single-atom catalysts, catalytic deconstruction of plastics, and catalytic MOFs, to name a few. Research areas initiated by ICEP indirectly led to DOE EFRCs, startup companies, and other achievements. Over its 18 years of existence, ICEP involved two different PIs (Stair and Notestein) and 24 senior investigators across several academic disciplines at Northwestern University. There were tight collaborations with Argonne National Laboratory, including specialized equipment and experiments permanently located there. The center supported ~400 person-years of effort by graduate students and postdocs, either directly through DOE support or indirectly by leveraging independent support provided to the trainees, e.g. through the NSF GRFP or internal fellowships. The project resulted in 328 manuscripts and numerous conference presentations.

36 MATERIALS SCIENCE↗

Oxidative Funneling of PVDC (CRADA Final Report)

Poly(vinylidene chloride) (PVDC) is a major polymer product from the Participant. PVDC-containing plastics are not commonly recycled. To overcome the challenges associated with recycling PVDC and multi-layer materials, we propose a tandem catalytic-biological process to convert PVDC containing waste to upcycled, tunable products such as polyhydroxyalkanoates (PHAs). PHAs are commercially relevant, biodegradable polymers that are useful in packaging, biomedical, and personal care applications. This technology, which the Contractor has named oxidative funneling (OxFun), uses a metal-promoted autoxidation step to depolymerize co-mingled polymers to a mixture of oxygenated compounds, which an engineered bacterium can funnel to a single bioproduct: here, medium chain length polyhydroxyalkanoates (mcl-PHAs). The proposed oxidation chemistry is amenable to inclusion of additional polymers, and the biocatalyst can be engineered to convert the deconstruction products to a variety of valuable chemicals, thus presenting a tunable system for both feedstock variability and target product. Pseudomonas putida KT2440 – a metabolically robust microbe that has been engineered and proven viable for upcycling deconstructed polystyrene (PS), high density polyethlene (HDPE), and polyethylene terephthalate (PET) – can be engineered with enzymes capable of de-chlorinating PVDC deconstruction products (e.g., 2,2-dichloroacetate) in addition to PE-derived substrates into mcl-PHAs.

36 MATERIALS SCIENCE↗

Understanding and Developing Dual-Wavelength Olefin Metathesis Polymerizations for the Rapid, Continuous Additive Manufacturing of High-Performance Thermosets

This report details the goals, approach, results, and future needs of a three-year Laboratory Directed Research and Development project funded by Sandia’s Materials Science Research Foundation. In this project, we established basic principles and mechanistic understanding of orthogonal or sequential chemistries for fabricating multi-material or robust materials. We developed numerous additive manufacturing, or 3D-printing, techniques including volumetric solid-state printing, dual-wavelength printing, and lithographic regulation of polymer crystallinity. We leveraged these new printing motifs to expand upon what is possible with manufacturing to give bespoke optical and mechanical performance. Moreover, we discovered new techniques for depolymerization enabling recovery of pristine carbon-fiber and high value electronics under moderate conditions.

36 MATERIALS SCIENCE↗

TCF Base Technology-Specific Final Report: Engineering Enzymes for Crystalline PET Substrate

The primary objective of this project was to develop a new polyethylene terephthalate (PET) hydrolase enzyme to depolymerize relevant PET substrates for Birch Biosciences, using high-throughput protein expression, purification, and assaying systems and machine learning-guided enzyme design. As a secondary project objective, we also aimed to develop a more energy-efficient ethylene glycol (EG) recovery strategy relative to distillation.

09 BIOMASS FUELS↗

Highly Recyclable Thermosets for Lightweight Composites

The objective of this project, Highly Recyclable Thermosets for Lightweight Composites (DOE Award DE-EE0009297), was to develop recyclable carbon fiber–reinforced polymer (CFRP) composites that are more energy efficient to produce than existing technologies while achieving superior mechanical performance and enabling closed-loop material recovery. Specifically, the project targeted vitrimer-based composites with tensile strength at least 20% higher than baseline recyclable polypropylene composites, retention of greater than 95% of tensile strength after multiple recycling and reprocessing cycles, recovery of carbonate monomers through depolymerization, and recovery of greater than 95% of carbon fibers of reusable quality. The project was carried out by The University of Akron in collaboration with Pacific Northwest National Laboratory and Raytheon Technologies Research Center.

36 MATERIALS SCIENCE↗

Hydrocracking Plastic Mixtures into Xylene

Our research aims to tackle the challenge in recycling end-of-life plastics, the accumulation of which has become a grand challenge to our society, sustainability and economy. Guided by life-cycle assessment (LCA) and tech-economic analysis (TEA), we specifically target the catalytic conversion of low-cost #3-7 plastic mixtures ($\$$5/ton) into p-xylene (>$\$$1000/ton), one of the most valuable hydrocarbon products. This goal is achieved by carrying out integrated research including catalysis, process engineering, and reactor design. The ultimate goal of this project is to enable energy-efficient and economically viable depolymerization of end-of-life plastic mixtures into value-added commodity chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Infinitely Recyclable Network Polymers, Enabling Sustainable Manufacturing (CRADA Final Report)

This FLO Materials project was aimed at commercializing a new, infinitely recyclable material that can enable closed-loop lifecycles for hard-to-recycle plastics and plastic products. Four hundred million metric tons of virgin plastic is produced each year, yet less than 10% of this material is recycled. In the US alone, 2% of energy consumption is dedicated to the manufacture of virgin plastics, polymer resin, and synthetic rubbers. By keeping plastic materials in circulation longer, we can reduce waste, lower manufacturing costs, cut energy and oil consumption, and drastically reduce greenhouse gas (GHG) emissions. Specifically, FLO’s innovation overcomes the complications associated with salvaging difficult-to-recycle plastics (i.e., contaminated thermoplastic linear polymers, thermoset cross-linked network polymers), which represent at least 20% of total polymer global production, with a recycling rate of near 0%. Chemical recycling of these new polymers through depolymerization allows all additives to be easily removed at room temperature and the recovered monomers to be remanufactured into next generation materials with 100% recovery of mechanical performance and aesthetic quality.

36 MATERIALS SCIENCE↗

BOTTLE: Hybrid Chemical-Mechanical Separation and Upcycling of Mixed Plastic Waste

The main objective of this project is to develop a hybrid mechanical-chemical recycling technology for multilayered and laminated plastics. We aimed to separate and upcycle up to more than 80% of the two main constituents of such structures, polyolefins and polyesters, for a significantly lower cost and at higher energetic efficiency and much larger throughputs than chemical recycling. At the end of the project, the team was able to: a) Develop an extrusion-based separation technology that resorts to polyester depolymerizaton and extraction and allows for more than 90% of the polyester to be separated in the melt from the main polyolefin stream. b) Depolymerize the separated PET to more than 90%, which facilitates its posterior repolymerization and guarantees its retention in the polymer value-chain. c) Develop a zeolite-induced extrusion-based technology able to conduct continuous catalytic cracking of polyolefins, including highly contaminated PCR streams, at temperatures as low as 350 OC. d) Show, using LCA/TEA analysis that the two technologies are much more advantageous techno-economically and over the material’s life cycle than existing recycling technologies.

36 MATERIALS SCIENCE↗

Tabulated data for Lignin-Derived Phenolic Compounds and Water Are Effective Cosolvents for Reductive Catalytic Fractionation

Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents. This is the tabulated data for the paper

biorefining↗

Calculation of monomer yields, verification of PG concentration approximation, catalyst comparison for neat aromatic RCF, SEM micrographs for postreaction pulps, yields of aqueous-phase sugar derivatives after PG-H2O RCF, reactor pressure transients, GPC comparing pre- and postreaction organic solvent composition, PG-H2O miscibility testing, GPC probing dimer/oligomer fractionation in PG-H2O mixtures for

Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents.

biorefining↗