Search NASA⌕ Search

SEARCH · Search NASA

Results for “Highlights”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Tuning Copolymer Microstructure Using Ring-Opening Cross-Metathesis Polymerization

The capability of ring-opening cross-metathesis (RO/CM) polymerization to produce alternating copolymers was studied. By treating commercial polybutadiene (PB) with bulky oxanorbornene monomers and Ru-based olefin metathesis catalysts, alternating copolymers were produced under mild conditions with high sequence fidelities. Here, we found that alternating copolymers could be produced starting from a variety of butadiene sources including PB, cyclooctadiene (COD), or t,t,t-1,5,9-cyclododecatriene (CDT), highlighting for the first time the kinetic pathway independence of this process. Kinetic copolymerization analysis of an oxanorbonene monomer with CDT revealed that much higher monomer conversions were obtained compared with the analogous homopolymerizations and showed evidence of alternating monomer incorporation. Copolymerization of these monomers also enabled good control when targeting different molecular weights. Copolymer thermal analysis revealed a strong correlation between thermal behavior and alternating sequence fidelity, providing a second lever beyond composition to tune thermal behavior. These data demonstrate that a broad variety of polymer microstructures can be accessed via RO/CM polymerization and highlight the potential of CDT in alternating copolymer synthesis.

Foster, Jeffrey C. [Oak Ridge National Laboratory ↗
DOE OSTI2026

Highly Responsive Near-Infrared Photodetector Based on Contactless PdSe 2 Integration with a Few-Layered MoSe 2 Field-Effect Transistor

Two-dimensional (2D) semiconductors with narrow bandgaps are promising candidates for near- and far-infrared (IR) photodetection, particularly in the telecommunication spectral window. However, current low-bandgap IR photodetectors face significant challenges due to their high dark current, increased carrier recombination, and thermally generated noise. Here, in this work, a hybrid phototransistor is demonstrated by integrating direct, contact-free palladium diselenide (PdSe 2 ) as a highly responsive IR detection layer with a non-IR-absorbing molybdenum diselenide (MoSe 2 ) field-effect transistor (FET), using a near-IR source at a wavelength of λ = 1650 nm. Exfoliated PdSe 2 flakes integrated into a back-gated FET architecture exhibit ambipolar transport behavior, with extracted hole and electron mobilities of 24.8 cm 2 V –1 s –1 and 58.4 cm 2 V –1 s –1 , respectively. The devices show a clear photocurrent generation under the illumination of a λ = 1650 nm laser source, achieving a notable responsivity of ∼300 mA W -1 at an applied gate voltage of 15 V, which highlights the suitability of PdSe 2 as a narrow-bandgap material for photodetection. Photoresponsivity saturates and does not have any effect above an applied gate voltage of 15 V. To further tune the photoresponsivity performance continuously with the applied gate voltage, we construct a van der Waals heterostructure phototransistor, where few layers of PdSe 2 are directly transferred onto the 2D channel region of a MoSe 2 FET, while avoiding any contact with the metal electrodes. In this heterostructure, PdSe 2 works as the primary active IR-absorbing layer, while MoSe 2 provides high-performance FET characteristics. This spatial separation of absorption and transport facilitates efficient interlayer charge transfer and charge separation, resulting in high responsivities of up to 972 mA W –1 at near-IR wavelengths and a low power density of 1.5 mW/mm 2 . The responsivity of our photodetector is comparable to that of some state-of-the-art commercially available NIR photodetectors, highlighting the potential of PdSe 2 -based heterostructures as scalable, CMOS-compatible platforms for high-performance near-IR detection.

Infrared (IR) photodetectors↗
DOE OSTI2024

Ce- and Ni-Codoped Double PrBaMn 2 O 5 Perovskite as a Ceramic SOFC Anode

This study explores the efficacy of cerium introduction, both on its own and in combination with nickel, into PrBaMn 2 O 5+δ (PBM) structures to enhance solid oxide fuel cell (SOFC) anodes. We synthesized Pr 1–x Ce x BaMn 2 O 5+δ compositions for x values of 0.05 (PrCe5) and 0.1 (PrCe10), as well as a nickel-doped variant (PrCe5Ni), assessing their performance under H 2 – 3% H 2 O reducing conditions pertinent to SOFC anode operations. Our findings reveal that the PrCe5 composition exhibits a thermal expansion coefficient (TEC) that not only improves upon that of the Ce-free counterpart but also aligns closely with the TEC standards of prevalent SOFC electrolytes. A notable advancement was achieved with the application of a 3.5 μm gadoliniadoped ceria (GDC) buffer layer through physical vapor deposition, effectively mitigating chemical interactions between PBM-based anodes and yttria-stabilized zirconia (YSZ) electrolytes, a concern highlighted by in situ neutron diffraction analyses. Electrochemical impedance spectroscopy, conducted over 220 h in a H 2 –3% H 2 O atmosphere at 750 °C, demonstrated that the optimal 3.5 μm thickness of the GDC buffer layer significantly minimizes the area-specific resistance (ASR) degradation rate to 0.002 Ω cm 2 /h, markedly outperforming both thinner (1 μm) and thicker (8 μm) GDC layers, which showed higher degradation rates of 0.15–0.2 Ω cm 2 /h due to the diffusion of Ba ions or delamination. Moreover, cerium doping fosters superior microstructural stability and obviates barium diffusion, thereby suggesting an enhanced durability of the doped anodes over their lifespan. Integrating nickel into the PrCe5 structure halved the ASR to 0.5 Ω cm 2 at 750 °C, situating it well within the ideal performance range for SOFC anodes. Furthermore, the enhancement brought about by simultaneously doping PBM with cerium and nickel, which fundamentally relies on the critical contributions of defect chemistry and crystal structure, highlights the significance of these fields in creating sophisticated materials for energy related applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Nitrate-To-Ammonia Electroconversion at Neutral pH on Polycrystalline Vanadium Sulfide Derived from Vanadium Disulfide

The electrochemical nitrate reduction reaction (NO3RR) offers a pathway to produce NH3 for fuel and fertilizer from waste NO3-. In this work, a polycrystalline vanadium sulfide (VSx), which is derived from solvothermally grown and annealed VS2, is shown to exhibit excellent NO3RR activity (2.3 +- 0.6 mg.cm-2 geo..h-1 @ -0.92 VRHE) and Faradaic efficiency to NH4+ (69 +- 6% at -0.69 VRHE) in buffered neutral pH electrolyte containing 0.1 M NO3-. A variety of characterization techniques are leveraged to support the VSx assignment, including X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, selected area electron diffraction, and X-ray diffraction measurements. The VS2 annealing step reduces the oxide character and generates VSx, which, based on the improved NO3RR activity, results in the creation of active sites for NO3- binding. To help shed light on NO3RR on VSx, VS2 is used as a model system, and a grand-canonical density functional theory (GC-DFT) investigation of VS2 shows strong evidence that S vacancies are active sites for NO3RR, where NO3- outcompetes H+ for adsorption at the S-vacancy sites. Moreover, GC-DFT results highlight a thermodynamically favorable reaction to generate NH4+ in an aqueous electrolyte at relevant cathodic potentials. As an annealed material, VSx may contain undersaturated V sites, which show an electronic structure similar to the theoretically calculated S-vacancy site of VS2, and these sites may contribute to the observed increase in NO3RR activity and selectivity for NH4+ on VSx versus unannealed VS2. Finally, kinetic isotope effect measurements suggest that the kinetic rate-limiting step of the NO3RR on VSx is not proton-coupled, indicating it may be the first electron transfer to adsorbed NO3*.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Catalytic Consequences of Hierarchical Pore Architectures within MFI and FAU Zeolites for Polyethylene Conversion

The benefits of hierarchical zeolites for the conversion of bulky molecules like polymeric waste have been reported in the literature; however, the impact of mesopore sizes and connectivities on rates, product selectivities, and catalyst deactivation in the context of plastic upcycling has not been systematically probed. Here, in this study, we synthesized a suite of hierarchical MFI and FAU zeolites via desilication under varying conditions for metal-free polyethylene conversion reactions under batch and flow conditions (473–523 K). Polyethylene (solid) conversion rates (normalized by Bro̷nsted acid site density) were higher on hierarchical than parent microporous MFI regardless of mesopore connectivities, i.e., open or constricted, suggesting that the incorporation of mesopores facilitates diffusion of intermediate products to access medium-pore protons for successive scission events. Furthermore, higher branched:linear gaseous product ratios were produced on hierarchical than parent MFI, since mesopores allow for egress of bulkier molecules without undergoing further secondary events, e.g., isomerization back to linear alkanes/alkenes or beta scission. Solid conversion rates on hierarchical FAU synthesized via desilication with cetyltrimethylammonium bromide (CTABr), however, were not higher than parent FAU, likely because the presence of CTABr facilitates recrystallization of leached species to form composites (hierarchical FAU and ordered mesoporous materials) with more isolated mesopores. The stagnation in rates, despite increased mesopore volumes (>0.22 cm 3 g –1 ), highlights the importance of confinement effects provided by micropores for cleaving C–C bonds at modest reaction conditions. In situ 1 H MAS NMR performed on polyethylene with MFI zeolite show that PE isomerizes (and potentially deconstructs) at temperatures near 450 K, highlighting the role of Bro̷nsted acid sites in activating C–C bonds under mild reaction conditions. Catalyst recyclability studies showed that all catalysts undergo deactivation during plastic upcycling reactions, but to varying extents. Overall, hierarchical materials have better catalyst stability than parent materials, although the differences in stability between hierarchical and parent FAU are smaller than those for MFI. Taken together, these findings demonstrate how rates, selectivities, and catalyst deactivation from plastic upcycling reactions can be controlled via fine-tuning the identity and connectivity of mesopores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Demonstration of an Automated System for Vertical Profiles of Volatile Organic Compounds

Volatile organic compounds (VOCs) play important roles throughout the atmosphere, many of which are altitude dependent. This highlights the need for easily deployable devices to sample VOCs across different atmospheric layers. To address this, we present the design and initial application of a Time Resolved Automated Volatile organIc compounds Sampling system (TRAVIS). VOCs are collected on sorbent tubes, which are subsequently analyzed by a thermal desorption gas chromatography mass spectrometry pipeline. TRAVIS leverages a piezoelectric pump with an integrated pressure sensor for precise (0.1% flow rate relative standard deviation) and accurate (−3 ± 2% error in VOC quantitation) measurements. Via deployment on a tethered balloon system over an agricultural area, TRAVIS is used to show consistent vertically resolved VOC concentrations in a well-mixed (i.e., turbulent) atmosphere (e.g., 5% relative standard deviation for isoprene) and vertically dependent concentrations for a stratified atmosphere (e.g., prior to boundary layer development). Furthermore, we also show VOC information from an intermittent plume via both targeted and untargeted analysis, highlighting future applications for spurious events in agriculture, air quality monitoring, and environmental impact. Overall, the development of TRAVIS represents a lightweight, accurate, sensitive, and precise VOC sampling module for the scientific community.

Aerosols↗
DOE OSTI2025

Oxygen Evolution on Mechanically Strained TiO2/NiTi: Implications of Compositional Heterogeneity at (Photo)Electrocatalytic Interfaces

The adsorption and activation energetics underpinning small molecule conversion on heterogeneous (photo)electrocatalysts are intrinsically tied to catalyst surface properties. Absent compositional characterization techniques with sufficient interface sensitivity, however, (photo)electrochemical performance can be misinterpreted in the context of bulk or near-surface material properties. Here we provide a fundamental investigation of the convoluting role of near-surface compositional heterogeneity in the interpretation of (photo)electrochemical alkaline oxygen evolution reaction (OER) activity, highlighting challenges in correlating composition measured by surface- and near-surface-sensitive probes. TiO2 thin films grown by air-annealing the superelastic alloy Nitinol (TiO2/NiTi) crack under tensile mechanical strain, increasing the number of electrochemically active Ni sites (Ni site density) that are probed via voltammetric features corresponding to Ni3+/Ni2+ redox events. (Photo)electrochemical OER kinetics trend with Ni site density, with overpotentials and Tafel slopes decreasing for Ni site densities < 1013 Ni/cm2geo and asymptotically approaching the performance of the base NiTi substrate for Ni site densities > 1013 Ni/cm2geo. Photoelectrochemical fill factors follow similar Ni site density dependent trends. When probing unstrained TiO2/NiTi, Ni site densities are two orders of magnitude higher when comparing near-surface-sensitive techniques (e.g., X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectrometry (TOF-SIMS), and scanning transmission electron microscopy-energy dispersive X-ray spectroscopy (STEM-EDS)) to surface-sensitive electrochemical measurements. This result highlights the challenge of correlating kinetic performance with intrinsic surface properties of electrochemical interfaces in the presence of near-surface compositional heterogeneity. Further, it reinforces the importance of fundamental investigations of surfaces with well-controlled composition and structure and the need for physically grounded and self-consistent interpretation of multiple near-surface characterization techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Beyond Ion Migration in Metal Halide Perovskites: Toward a Broader Photoelectrochemistry Perspective

Ion migration is a broad term used to account for the degradation of halide perovskite materials and devices. However, ion mobility is only one piece of the full picture-mobile ions/defects are first created, then transported, and eventually annihilated or immobilized. In this Perspective, we summarize emerging work that shows how tractable photochemical and Faradaic reactions provide a continuous source of ions to migrate. Furthermore, we discuss strategies to fundamentally manipulate ion migration by targeting specific electrochemical and reduction/oxidation mechanisms. This highlights the important role of defect photoelectrochemistry, as well as the soft nature of the perovskite lattice, in ion migration and self-healing. We conclude that distinguishing more detailed processes involved in “ion migration”, with an emerging focus on the reactions that form mobile ionic defects, is necessary to greatly improve the stability of devices and open up more technological applications.

defects↗
DOE OSTI2025

Solvent-Free Melt-Processed Cathode Mitigates Li Anode Instability in Polymer-Based Solid-State Batteries

Solvent-free manufacturing of battery components is a promising alternative to traditional slurry processing for reducing the cost and environmental impact. In this work, we used twin-screw melt extrusion to fabricate a polymer-based high voltage composite cathode. The melt-processed cathode is dense (near zero porosity) and thick (65 μm) and has high active material loading (80 wt %). The active particles are distributed uniformly throughout the melt-processed cathode, unlike the traditional slurry-cast cathode, which exhibits inhomogeneous particle distribution. In the melt-processed cathode, polymer and carbon form separate phases, whereas in the slurry-cast cathode they blend into a single phase. Due to these structural differences, the melt-processed cathode shows smooth charge–discharge profiles, while the slurry-cast cathode shows noisy charging and soft-shorting behavior. In conclusion, this work highlights that twin-screw extrusion as a scalable, solvent-free manufacturing method is advantageous in producing uniform cathodes, which mitigates anode instability.

25 ENERGY STORAGE↗
DOE OSTI2026

Electrocoagulation in Water Treatment: Targeted Contaminant Removal and Laboratory Best Practices

Electrocoagulation for water treatment offers many advantages over traditional treatment technologies, including improved energy efficiency and modularity. One challenge with electrocoagulation is the lack of standardization in the methodology and reporting. This review provides a novel contribution by examining the past literature using a uniform metric (charge loading) as a basis for comparison, highlighting the importance of uniform reporting practices in this field. Furthermore, this review provides practical guidance for experimentalists in standardizing the electrocoagulation design and operating procedures. First, we present a comprehensive overview of contaminant-specific electrocoagulation as an electrochemical treatment technology for processing industrial, municipal, and agricultural water, with a focus on aluminum and iron electrocoagulation. We detail the fundamental mechanisms that allow for constituent removal during pretreatment. Specifically, we highlight electrocoagulation’s potential for organics, metalloids, microbes, and hardness remediation, examining the optimal removal conditions in terms of charge loading and current density. We conclude this work with some experimental best practices for lab-scale electrocoagulation experiments.

aluminum↗
DOE OSTI2025

Chemical Redox Agent-Driven Noncorrosive Formation of Nanoporous Mg Structures for Advanced Hydrogen Storage

Light metal-based nanomaterials are widely used for energy storage due to their high energy density and surface-to-volume ratio. However, their high reactivity is paradoxically both the source of advantageous properties and a hurdle to the fabrication of stable nanostructures. Here, in this study, we demonstrate the formation of nanoporous Mg via chemical redox agent-driven dealloying, which ensures minimized surface passivation and results in fine nanostructures with <50 nm of interconnected metallic ligament despite the labile chemical properties of Mg. The thin passivation layer protects the metallic ligaments from severe coarsening by suppressing surface diffusion. The hydrogen storage performance of nanoporous Mg is investigated as an exemplar for energy applications, and the hydrogen ab/desorption kinetics is substantially enhanced compared to other nano-Mg with similar dimensions. Mesoscale simulations highlight the significance of the bicontinuous structure compared to the particle-like counterpart. This work offers valuable insights into the unexplored realm of reactive metal-based nanoporous structures, highlighting their potential for sustainable energy storage and carrier media.

08 HYDROGEN↗
DOE OSTI2026

Efficient Low-Temperature Direct Lithium Extraction from Chloride Brines Enabled by High-Capacity Sorbent

The demand for lithium, a key component in rechargeable batteries for electric vehicles and renewable energy storage systems, has surged in recent years. Meeting this demand requires efficient extraction methods that are both environmentally friendly and economically viable. This study investigates the utilization of the high-capacity sorbent amorphous aluminum hydroxide for enabling efficient direct lithium extraction at low temperatures. Traditional extraction methods often involve acid-leaching and energy-intensive processes that are not only expensive but also environmentally taxing. In contrast, our approach leverages the exceptional sorption properties of amorphous aluminum hydroxide to facilitate lithium extraction directly from brine, achieving extraction efficiencies of 94.4% in case 1 and 96.2% in case 2 at low temperatures. Kinetic modeling using the Avrami–Erofe’ev framework reveals a nucleation-growth mechanism ( n = 0.71, k = 0.131 h –1 ), providing quantitative insights into the solid-state phase transformation process. This method significantly reduces energy consumption and minimizes the environmental footprint. Through systematic experimentation and optimization, we demonstrate the effectiveness and scalability of our approach, highlighting its potential to revolutionize lithium extraction processes. Our findings highlight the potential of high-capacity sorbents, particularly amorphous aluminum hydroxide toward sustainable lithium production, contributing to the advancement of clean-energy technologies.

anions↗
DOE OSTI2025

Algae Asphalt to Enhance Pavement Sustainability and Performance at Subzero Temperatures

This paper evaluates the potential of algae-derived biobinders as sustainable alternatives for pavement construction. It specifically examines the physicochemical and rheological properties of biomodified binders and their potential to offset carbon emissions when used as partial replacements for conventional petroleum-based asphalt binders. Biosequestration of CO 2 using microalgal cell factories is a promising way of recycling CO 2 into biomass via photosynthesis. Our study demonstrates that incorporating algae-derived binders into asphalt can significantly reduce carbon emissions. Each 1% increase in algae-based biobinder leads to an approximate 4.5% decrease in net carbon emissions. This indicates that a blend containing about 22% biobinder has the potential to achieve carbon neutrality. Blends with higher proportions may even result in net-negative emissions, highlighting a promising strategy for environmentally responsible road construction. In terms of performance, the study shows that certain algae-derived biobinders significantly enhance the cracking resistance of asphalt, particularly under subzero temperatures, by improving its stress-relief capacity. A key contribution of this work is the introduction of polarizability as a novel molecular-level parameter for assessing the compatibility of algae-derived bio-oils with asphalt. By capturing the electronic responsiveness of bio-oil molecules, polarizability serves as a predictive indicator of their interaction potential with asphalt components, providing a new dimension for evaluating the binder performance at the molecular scale. Among the tested materials, the biobinder derived from Haematococcus pluvialis demonstrated particularly strong improvements in resistance to permanent deformation under repeated loading conditions analogous to traffic-induced stress, as well as enhanced resistance to moisture-induced damage. In conclusion, these findings advance the chemistry-driven design of biomass-based binders and highlight a promising pathway toward the development of low-carbon, high-performance, and sustainable infrastructure materials.

Algae↗
DOE OSTI2026

Imaging from Macro to Nanoscale: Multimodal Advances in Chemical and Biomedical Imaging

Imaging increasingly serves as a multiscale framework for linking molecular mechanisms to cellular behavior, tissue architecture, and organ phenotypes in biology and unraveling fundamental processes in chemistry, physics and materials science. This Perspective highlights recent advances in chemical and biomedical imaging across macro-, micro-, and nanoscales, using representative examples published in Chemical and Biomedical Imaging (CBMI). At the macroscale, we discuss chemically selective MRI, including endogenous and exogenous CEST strategies, together with photoacoustic imaging as a hybrid modality with functional and chemical contrast. At the microscale, we consider fluorescence, label-free optical and vibrational imaging, and selected X-ray approaches that expand sensitivity, specificity, and temporal resolution in biological and materials systems. At the nanoscale, we highlight super-resolution fluorescence microscopy, single-molecule methods, tip-enhanced Raman spectroscopy, and correlative imaging strategies that resolve local heterogeneity and molecular organization. Across scales, a common theme emerges that advances in probes, contrast mechanisms, instrumentation, and sample handling are enabling chemically informed imaging that connects molecular specificity with biological context.

multiscale imaging↗
DOE OSTI2024

Mining for Metal–Organic Systems: Chemistry Frontiers of Th-, U-, and Zr-Materials

The conceptual framework presented in this Perspective overviews the design principles of innovative thorium-based materials that could address urgent needs of the medicinal, nuclear energy, and waste remediation sectors from the lens of zirconium and uranium analogs. We survey the intersections of Zr, Th, and U chemistry with a focus on how the intrinsic behavior of each metal translates to broader material properties, including, but not limited to, structural and topological diversity, preferential metal–ligand binding, and reactivity. On the example of several classes of materials, including organometallic complexes, polyoxometalates, and the primary focus of this Perspective, metal–organic frameworks (MOFs), the design principles that govern the preparation of Zr-, Th-, and U-compounds, including oxophilicity, variation in oxidation states, and stable coordination environments have been considered. Further, we highlight how the impact of the mentioned variables may shift throughout the progression from discrete molecular systems to extended structures. We discuss the common assumption that zirconium-organic materials are typically considered a close analog of thorium-based congeners in areas such as material design and preparation. Through consideration of fundamental chemistry principles, we shed light on the relationships between Zr-, Th-, and U-based materials and highlight how a critical analysis of their distinct properties can be used to target a desired material performance. Finally, we provide a detailed understanding of Th-based materials chemistry by anchoring their fundamental properties between two well-studied reference points, zirconium- and uranium-containing analogs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Precise Synthesis of Complex Si–Si Molecular Frameworks

In this Perspective, we highlight the emergence of target-oriented syntheses of complex molecules composed of Si–Si (oligosilanes) rather than C–C bonds. Saturated oligosilanes structurally resemble alkanes with respect to a tetrahedral geometry, a preference for a staggered conformation in linear chains, the ability to form stable small rings, and tetrahedral stereochemistry at asymmetrically functionalized Si centers. There are also critical differences, for example, differences in multiple bonding and the ability to form penta- and hexacoordinated structures, that mean that chemical reactivity and, in particular, rules for stereoselective synthesis do not cleanly translate from carbon to silicon. This Perspective will discuss recent achievements in the precise, controlled synthesis of complex molecules comprised mainly of Si–Si bonds and highlight the mechanistic insights enabling increased molecular complexity. New tools, such as electrochemical and catalytic reactions, will be discussed as well as the problem of controlling relative configuration in molecules containing multiple stereogenic-at-silicon centers. Furthermore, these synthetic achievements facilitate the discovery of new properties, including insight into light absorption, conformation, and mechanical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Coherent Control over Nuclear Hyperpolarization Using an Optically Initializable Chromophore-Radical System

Chromophore radicals (CR) are emerging as important components for molecular quantum information science (QIS), especially in the context of quantum sensing. Here, we demonstrate that the optically hyperpolarized electrons in a 1,6,7,12-tetrakis(4-tert-butylphenoxy)-perylene-3,4,9,10-bis(dicarboximide) (tpPDI) covalently linked to a partially deuterated 1,3-bis(diphenylene)-d 16 -2-phenylallyl radical (BDPA-d 16 ) can be coherently manipulated via pulsed dynamic nuclear polarization (DNP) methods to transfer polarization to nuclear spins and back. Under light illumination at 85 K, electron hyperpolarization in BDPA is enhanced 2.1- to 2.4-fold over thermal polarization and lasts for more than 100 ms. By applying nuclear orientation via electron spin-locking (NOVEL) DNP, this optically amplified electron hyperpolarization was successfully transferred to a 1 H nuclear spin within the CR system and efficiently returned to the electron spin for readout via reverse-NOVEL. The NOVEL transfer efficiency of 65% amounts to a 688-fold nuclear spin hyperpolarization of the target nuclear spin, considering the 2.1-fold electron spin hyperpolarization. This reversible coherent manipulation of hyperpolarization transfer highlights the utility of CR systems to initialize and read out nuclear spin states in a disordered matrix at moderate cryogenic temperatures. Coupled with CRs’ environmental compatibility, tunability, and precise state initialization, these results highlight the promising role of nuclear spins in CRs for QIS applications, including quantum sensing and memory.

charge transfer↗
DOE OSTI2026

Seed-Mediated Colloidal Synthesis of Multimetallic and High-Entropy Alloy Nanocrystal Libraries with Enhanced Catalytic Performance

Engineering colloidally stable multimetallic nanocrystals offers many benefits in a wide range of applications and allows manipulation of physical, chemical, and electronic properties of materials at the nanoscale. Synthesis routes are challenged by the chemical complexity required to temporally and spatially coordinate the reduction and alloying of multiple metal species, which has hampered the development of tunable libraries of colloidal materials to date. Here, in this work, we demonstrate a seed-mediated synthesis method to incorporate five or more metal elements into uniform, colloidally stable nanocrystals. By integrating machine learning-accelerated simulations, the synthesis of shortlisted high-entropy alloy nanocrystals was demonstrated. Multiple seed materials can be used, leading to a library of multimetallic nanocrystals with tunable electronic, physical, and alloy structures. The advantage of this synthetic protocol is highlighted in the preparation of catalytic materials that showed 2 orders of magnitude higher reaction rates than monometallic catalysts and outstanding thermal stability, thus highlighting the promise of this approach for high-performance materials in many areas.

77 NANOSCIENCE AND NANOTECHNOLOGY↗