Search NASA⌕ Search

SEARCH · Search NASA

Results for “Intermediate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Single spin asymmetries in electron-nucleon scattering at low and intermediate energies

The target normal single-spin asymmetry in electron nucleon scattering is studied in the framework of the 1/Nc expansion of QCD, which allows for a rigorous description in the energy range that includes the Δ resonance and below the second baryon resonance region. The asymmetry is driven by the absorptive part of the two-photon exchange component of the scattering amplitude, being therefore the most unambiguous two-photon exchange effect. Such amplitude is shown to be described up to the next to leading order in the 1/Nc expansion only in terms of the charge and magnetic form factors of the nucleons, consequence of the approximate SU(4) spin flavor symmetry valid in the large Nc limit for baryons. A discussion is provided of the 1/Nc expansion framework along with the results for the asymmetries in elastic (e−N↑→e−N ), inelastic (e−N↑→e−Δ ), and inclusive scattering.

Goity, Jose Luis↗
DOE OSTI2024

Effect of Rotation on Wave Mixing in Intermediate-mass Stars

Internal gravity waves are likely to cause mixing in stellar interiors. Studies show that the mixing by these waves changes drastically across age and mass. Here, we study the effect of rotation on this wave mixing by considering a 7 M ⊙ model at zero-age main sequence and mid-main sequence. We compare the mixing profiles at a range of rotation rates (1 × 10 -5 , 2 × 10 -5 , 3 × 10 -5 , 4 × 10 -5 , and 1 × 10 -4 rad s -1 ) and observe that the mixing decreases with decreasing Rossby number. This can be attributed to the effect of rotation on convection, which influences the amplitude with which the waves are excited near the convective–radiative interface.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Secondary organic aerosols derived from intermediate-volatility n-alkanes adopt low-viscous phase state

Abstract. Secondary organic aerosol (SOA) derived from n-alkanes, as emitted from vehicles and volatile chemical products, is a major component of anthropogenic particulate matter, yet the chemical composition and phase state are poorly understood and thus poorly constrained in aerosol models. Here we provide a comprehensive analysis of n-alkane SOA by explicit gas-phase chemistry modeling, machine learning, and laboratory experiments to show that n-alkane SOA adopts low-viscous semi-solid or liquid states. Our study underlines the complex interplay of molecular composition and SOA viscosity: n-alkane SOA with a higher carbon number mostly consists of less functionalized first-generation products with lower viscosity, while the SOA with a lower carbon number contains more functionalized multigenerational products with higher viscosity. This study opens up a new avenue for analysis of SOA processes, and the results indicate few kinetic limitations of mass accommodation in SOA formation, supporting the application of equilibrium partitioning for simulating n-alkane SOA formation in large-scale atmospheric models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Life Cycle Analysis of Growing Canola for Biofuel Production in the United States

This study quantifies and compares the life cycle greenhouse gas (GHG) emissions of renewable diesel (RD), sustainable aviation fuel (SAF), and biodiesel (BD) produced from two U.S. canola production systems: 1) emerging intermediate winter canola, typically grown in double- or relay-cropping systems between the growing seasons of main crops, and 2) main canola, mostly spring canola but also including winter canola, which are grown as primary crops occupying the field for a full growing season. Using the Research and Development version of the Greenhouse gases, Regulated Emissions, and Energy use in Technologies (R&D GREET) model and the most up-to-date life cycle inventory data─field trial data for intermediate winter canola (>37,000 acres) and recent national survey data for spring canola─this life cycle analysis (LCA) estimates the direct emissions from canola cultivation and harvest, the conversion of canola into fuels, fuel transportation, and combustion. In addition, we account for market-mediated emissions associated with a scenario of 0.5 billion gallons per year of spring canola-based biofuels, including induced land use change (ILUC), induced other crop (nonfeedstock) production changes, and induced livestock production changes. For intermediate winter canola, these market-mediated effects were not modeled, as ILUC is expected to be negligible due to its integration into existing rotations, and data are currently insufficient to reliably quantify other market-mediated changes. The estimated life cycle direct emissions of RD/SAF derived from intermediate winter canola and main spring canola are about 32 and 33 g of CO2-equivalent per megajoule of fuel (g CO 2 e/MJ), respectively. Corresponding emissions for BD from intermediate winter canola and main spring canola are about 30 and 31 g of CO 2 e/MJ, respectively. Farming is the dominant emissions source for both canola systems, with intermediate winter canola and main spring canola emitting about 19 and 20 g of CO 2 e/MJ, respectively. ILUC and other induced changes increase emissions of main spring canola-derived RD/SAF and BD by about 18 and 17 g of CO 2 e/MJ, respectively. These results indicate that the GHG emissions of biofuels produced from the two canola systems may differ substantially due to the different land use dynamics of the systems.

biodiesel↗
DOE OSTI2024

In situ characterization of metastable Pb3O5 and Pb2O3 phases during thermal decomposition of PbO2 to PbO

Nonstoichiometric lead oxides play a key role in the formation and cycling of the positive electrodes in a lead acid battery. These phases have been linked to the underutilization of the positive active material but also play a key role in the battery’s cycle life, providing inter-particle adhesion and the connection to the underlying lead grid. Similar phases have previously been identified by mass loss or color change during thermal annealing of PbO2 to PbO, suggesting that at least two intermediate PbOx phases exist. Using multiple in situ analysis techniques (powder diffraction, x-ray absorption, x-ray photoelectron spectroscopy) and ex situ nuclear magnetic resonance measurements, the structural conversion and changes in the lead oxidation states were identified during this process. Isolation of the PbOx phases enabled confirmation of Pb3O5 and Pb2O3 by diffraction and the first 207Pb NMR measurement of these intermediates.

Kinnibrugh, Tiffany L.↗
DOE OSTI2026

Reducing the Cost of CCSD Basis Set Extrapolation in Ab Initio Computational Thermochemistry

Here, a series of approximations to CCSD contributions in computational model chemistries is presented in the context of kcal mol –1 , kJ mol –1 , and 20 cm –1 theoretical predictions of total atomization energies, benchmarked within the HEAT+CH 4 test suite. A specific set of circumstances where MP2, without empirical scaling, may be used as an effective intermediate in the first two of these accuracy ranges was determined. However, SDQ-MP4, a method long used in pursuit of kcal mol –1 accuracy but relatively unstudied in the subchemical accuracy community, offers significant improvement over the quality of MP2 as a basis-set intermediate at significantly reduced cost compared to CCSD. Given this, we argue for SDQ-MP4 as the de facto CCSD basis-set intermediate in sub-chemical accuracy calculations when CCSD in a desired basis set becomes unaffordable. We additionally report on a “CBS-like” scheme, where MP2 and SDQ-MP4 are used in conjunction to create a “cheap” three-part approximation of large CCSD basis set limits. The data for the CCSD approximation schemes are organized in such a way that model chemistry developers can locate an analog of their current approach for the CCSD basis set limit and explore alternative intermediates that either decrease computational cost or increase computational accuracy. We also show, for a handful of molecules, that SDQ-MP4 shows promise as an effective basis-set intermediate for harmonic and fundamental frequency computations, allowing for zero-point corrections of nearly CCSD(T)/ANO1 quality using simple composite methods that only require CCSD(T)/ANO0.

Thorpe, James H. [Argonne National Laboratory (ANL↗
DOE OSTI2025

In Situ Studies of Copper-Zirconia-Zinc Oxide Model Catalysts for CO 2 Hydrogenation

A combination of in situ X-ray photoelectron spectroscopy (XPS) and infrared reflection absorption spectroscopy (IRAS) was used to investigate the formation of surface intermediates from CO 2 hydrogenation on copper-zirconia-zinc oxide model catalysts under reaction conditions. Copper clusters with different numbers of atoms (n = 1, 4, 13) were deposited onto bare and ZrO 2 -modified ZnO powder supports to systematically examine the effects of Cu cluster size and the synergy between metal and metal-oxide components. Under low pressure CO 2 hydrogenation conditions (CO 2 :H 2 = 1:9, 0.4 mbar, 300–600 K), XPS and IRAS identify the most prominent intermediates as carbonate (CO 3 *), formate (HCOO*) and methoxy (CH 3 O*), which is the final surface-bound intermediate leading to methanol. The temperature profiles are consistent with a mechanism in which CO 2 is adsorbed as carbonate species (HCO 3 *, CO 3 *) followed by hydrogenation reactions to formate (HCOO*) and methoxy (CH 3 O*), but the relative yields strongly depend on surface composition. Specifically, the presence of ZrO 2 promotes CO 2 adsorption and activation and improves the thermal stability of the Cu clusters against loss of surface area. Moreover, the ternary Cu 4 /ZrO 2 /ZnO surface is significantly more active than Cu 4 /ZnO and ZrO 2 /ZnO surfaces for the formation of methoxy (CH 3 O*), indicating that Cu–ZrO 2 interfaces promote the formation of key intermediates leading to methanol. Finally, the yields of intermediates are similar for all Cu cluster sizes (Cu 1 , Cu 4 and Cu 13 ), indicating that the primary role of Cu is to provide H atoms via H 2 dissociation and spillover. In conclusion, these molecular-level insights provide a fundamental understanding of the enhanced efficiency of ternary Cu–ZrO 2 –ZnO catalysts and establish design principles for developing improved catalysts for CO 2 conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

High-Rate, Selective Electrosynthesis of Cyclohexanone Oxime via In Situ Generation and Release of Hydroxylamine on Bismuth

Oxime compounds are key industrial intermediates for nylon precursors and commodity chemicals. However, conventional routes rely on multistep reactions and hydroxylamine (NH 2 OH) salts, raising significant safety and sustainability concerns. Although electrosynthesis offers an alternative, oxime formation on d-block transition metals suffers from poor selectivity, as nitrogen oxyanion intermediates bind strongly to the surface and are readily over-reduced to ammonia. Here, we report morphology-controlled p-block bismuth rhombic dodecahedra (Bi RDs) that promote in situ NH 2 OH generation and its desorption into the electrolyte, enabling an electrochemical-chemical decoupled route for cyclohexanone oxime (CHO) synthesis. Bi RDs deliver nearly 100% Faradaic efficiency (FE) at −0.5 V vs. RHE and a yield of 1.4 mmol h –1 cm –2 at −0.9 V vs. RHE in an H-cell, while maintaining a CHO selectivity of nearly 100% at 100 mA cm –2 in a flow cell. Under identical conditions, d-block electrodes (Cu, Pd, Ag) show FE below 30%. Density functional theory calculations reveal that Bi 6p orbital-derived surface states weaken intermediate binding and facilitate NH 2 OH desorption, suppressing over-reduction. Kinetic analysis, post-addition trapping experiments, and in situ ATR-FTIR and Raman spectroscopy suggest the following reaction mechanism: NH 2 OH is selectively generated at the electrode surface, released as a freely diffusing intermediate, and undergoes homogeneous condensation with cyclohexanone in the bulk electrolyte, bypassing the surface-confined Langmuir–Hinshelwood pathway. These findings demonstrate that regulating intermediate desorption through p-block orbital chemistry provides a general strategy for achieving high selectivity in electro-organic nitrogen synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Investigation of Benchmark $k$ eff Sensitivity and Uncertainty for 239 Pu fission in Specific Energy Ranges

Nuclear data at intermediate energies (from 1 to 100s of keV) are evaluated based on scarce differential data and theory unable to capture physics’ expected structure. There is also a lack of integral data. This is a known deficiency and is challenging to address. Calculated effective multiplication factor, k eff , values for intermediate energy experiments are ~25× further from experiment than for fast energies and are often well outside the experimental uncertainties. The goal of the PARADIGM (PARallel Approach of Differential and InteGral Measurements) project is to significantly re duce the uncertainties of intermediate energy nuclear data for 239 Pu. To this end, PARADIGM simultaneously optimizes experiments at both the Los Alamos Neutron Science Center (LANSCE) and National Criticality Experiments Research Center (NCERC). The combined set of data will inform new intermediate-energy nuclear data. By execution of differential and integral experiments, establishment of new theory, and undertaking nuclear data evaluation in parallel, the timeline to deliver improved nuclear data to users will be reduced significantly that is to three years. For the PARADIGM project, it was decided to optimize an integral experiment for two neutron energy ranges, within the full intermediate energy range. The low energy range goes from 1 to 30 keV, while the higher energy range goes from 30 to 600 keV. This work focuses on nuclear data sensitivities and uncertainties for 239 Pu fission for existing experiments in the International Criticality Safety Benchmark Evaluation Project (ICSBEP). When designing new experiments, it is important to understand what benchmarks currently exist. For a more traditional experiment design (in which a specific application model(s) exists), comparisons would be made between the application model(s) and existing benchmarks. For PARADIGM, there is no specific application model, but instead the specific nuclear data reaction and energy ranges of interest can be explored for existing benchmarks.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

The PARADIGM Project: Case Study in Balancing Experiment Uncertainty with Design simplicity

Accurate nuclear data are required for simulations of many applications including nuclear criticality safety. Actinide nuclear data at intermediate energies (from 1 to 100s of keV) are imprecise and inaccurate, because of scarce differential data, and an insufficient theory approach to capture the structures expected in the data to yield evaluated nuclear data, and lack of integral data for proper validation. This is a known deficiency but has proved challenging to address. More specifically, only 5% of integral experiments in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) benchmark suite address intermediate energies (Fig. 1). Associated calculated effective multiplication factor, k eff , values for these experiments are far outside the experimental uncertainties and are 25× further from experiment than for fast energies. These differences could either stem from systematic biases in nuclear data, experiments or both. The goal of the PARADIGM (PARallel Approach of Differential and InteGral Measurements) project is to significantly reduce (by more than tens of percent) the uncertainties of intermediate energy actinide nuclear data. The PARADIGM project designed and intends to execute LANSCE (Los Alamos Neutron Science CEnter) and NCERC (National Criticality Experiments Research Center) intermediate experiments in parallel. They will specifically address a high priority nuclear data need—reducing bias and uncertainty in intermediate plutonium nuclear data. The two experiment will achieve that by informing each other and nuclear theory. By doing all these steps in parallel, the timeline to deliver improved nuclear data to users will significantly be reduced. This work will focus on the integral experiment final design and the balance of design and modeling simplicity while minimizing experiment uncertainty.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

A Data-Driven Framework for Predicting the Sorting and Screening Performance of an Integrated Biomass Feedstock Preprocessing System

The characteristics of mechanically sorted and screened lignocellulosic biomass, such as the mass contents of corn stover anatomical fractions (leaves, husks, stalks, cobs, etc.), can be used to calculate the intermediate feedstock quality attributes “yield” and “purity” that indicate the conversion efficiency of biocrude. No prior study has investigated the correlations from the characteristics of raw biomass and preprocessing unit operation parameters to those intermediate feedstock quality attributes. This work presents a data-driven framework for assessing and predicting the intermediate feedstock quality attributes in an integrated biomass feedstock preprocessing system. Our study used corn stover as a typical type of herbaceous biomass because of its abundance in the U.S. It began with data acquisition of moisture content, particle size distribution, and anatomical fractions of the materials after each unit operation in the system. The objective of this preprocessing system is to minimize husks and leaves and maximizing cobs and stalks by mechanically separating the materials into three streams via disc screen and air separator. Prototype neural network models were then developed to evaluate the feasibility of predicting process outcomes based on measurable parameters. It is found that incorporating physical constraints into these prediction models significantly enhances the accuracy of the predicted yield and purity against the ground truth data. The experimental data and model predictions indicate that decreasing throughput increases purity, while higher throughput results in lower purity. Finally, an optimization problem was introduced to search optimal combinations of feed material properties and preprocessing unit operation parameters, as the intermediate feedstock quality attributes – yield and purity, appeared to be competing factors. The study also suggests the continual need to improve the data-driven framework’s predictability by incorporating more accurate physical models to describe the dynamics in the preprocessing units such as the air separator.

09 - BIOMASS FUELS↗
DOE OSTI2026

Methyl formate oxidation kinetics up to 100 atm

Methyl formate (MF, CH3OCHO), the simplest ester, is a representative oxygenated fuel with high oxygen content, and low sooting tendency. However, its oxidation behavior under high-pressure and intermediate-temperature conditions remains insufficiently understood, especially where low-temperature peroxy radical chemistry, methanol chemistry, and pressure-dependent reaction pathways play a critical role. In this study, MF oxidation experiments were conducted in the Princeton supercritical-pressure jet-stirred reactor (SP-JSR) at 20 and 100 atm over the temperature range of 400–950 K under both fuel-lean and fuel-rich conditions. Based on the experimental results, an updated HP-Mech was developed by incorporating previous MF sub-mechanisms, expanded low-temperature peroxy pathways, and evaluated pressure-dependent decomposition kinetics. The newly updated HP-Mech shows greatly improved performance in predicting the onset temperature, the key intermediate species fractions, methanol formation, and the progression of MF oxidation across all the experimental conditions. Path flux analysis indicates that MF consumption at the onset stage is dominated by H-abstraction at the methyl site, forming CH2OCHO radicals that lead to the formation and isomerization of O2CH2OCHO, driving low-temperature chain propagation. Moreover, H-abstraction at the formate site forms CH3OCO radicals that preferentially decompose to CH3, initiating the methanol formation pathway linked to CH3O2 and HO2 chemistry. At the same time, HO2 formation is strongly coupled to MF oxidation through multiple MF-derived radical pathways. HCO originates from MF oxidation and acts as a key coupling species linking fuel consumption to HO2 buildup, especially under high-pressure and intermediate-temperature conditions. In addition to this dominant channel, supplementary HO2 formation pathways involving CH3, CH3O, CH2OH, and CH3O2 reacting with O2 further connect methanol chemistry and oxygenated radical chemistry to the HO2 pool, indicating the central role of HO2 in governing MF oxidation. Sensitivity analysis identifies MF with OH/HO2/CH3O2 reactions and the HO2/H2O2/OH sequence as the key factors controlling reactivity in the high-pressure and intermediate-temperature regime. MF directly reacts with OH/HO2/CH3O2 to consume the fuel and produce reactive radicals like CH2OCHO and CH3OCO that undergo subsequent oxidation pathways. Moreover, HO2 recombination suppresses oxidation at lower temperatures, while thermal decomposition of H2O2 accelerates OH production and promotes fuel consumption as temperature increases. The direct formation of active OH from HO2 radicals further completes the mechanism, improving its prediction especially during the oxidation onset stage.

Low-temperature Chemistry↗
DOE OSTI2025

Regulatory helix plays a key role in genetic ON-OFF switching for the 2’-deoxyguanosine sensing mRNA element

Transcriptional riboswitches, noncoding mRNA elements that operate in cis to regulate gene expression, have a promising potential in medicine, synthetic biology and directed evolution. They bind to cellular metabolites or metal ions with high specificity, leading to conformational rearrangements that facilitate the activation or premature termination of transcription for downstream genes. This elegant mechanism for feedback regulation of metabolic pathways has been identified in prokaryotes and a few in eukaryotes. Our chemical probing of the 2’-deoxyguanosine (2’-dG)-sensing riboswitch demonstrates that the overall conformational state of the full-length riboswitch (dGsw-fl) is unresponsive to the 2’-dG. Although binding proceeds as expected, dGsw-fl exclusively populates an OFF state of transcriptional inhibition. We chemically probed the structure of a known dGsw transcriptional intermediate (dGsw-int) to evaluate the possibility of a cotranscriptional regulatory role. Interestingly, apo dGsw-int adopts an alternative conformation in which a stable anti-terminator helix is formed, leading to an ON state where transcription can proceed. In the presence of 2’-dG, this anti-terminator helix is destabilized to produce a conformation reminiscent of the full-length, OFF-state dGsw. Using a fluorescence quenching assay, we demonstrate that binding 2’-dG to early transcriptional intermediates can inhibit the formation of the anti-terminator helix, locking dGsw in an OFF state. These data suggest that metabolite sensing occurs during a brief window of time between the synthesis of two transcriptional intermediates. Our studies indicate that dGsw does not function as a binary ON−OFF switch, but instead fine-tunes the transcription of downstream genes during RNA synthesis using key intermediates.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Tuning Perovskites’ Hydration-Induced Chemical Expansion with Octahedral Tilt Angles

Hydration-induced strains in proton-conducting oxides compromise chemo-mechanical stability when these materials are applied in protonic ceramic electrochemical cells. Here, to develop design principles for zero-strain materials, we systematically studied the hydration coefficients of chemical expansion (CCEs) in perovskite (Sr, Ba)(Ce, Zr, Y)O 3–x solid solutions with in situ dilatometry and thermogravimetric analysis in the range of 430–630 °C. By including and decoupling a wide range of tolerance factors and lattice parameters, we were able to identify a minimum in hydration CCEs (0–0.02) at intermediate tolerance factor values (t ≈ 0.95). Conversely, despite expectations of lower CCEs in larger unit cells, no general trend in CCE versus lattice parameter was found, and opposite trends could be seen for Sr(Ce, Zr, Y)O 3–x versus Ba(Ce, Zr, Y)O 3–x separately. In situ neutron diffraction (ND) enabled atomistic insight. Upon decreasing t, chemical strain anisotropy increased, but this trend did not match the U-shaped dependence of macroscopic CCEs on t. Instead, perovskites with intermediate t, hosting intermediate octahedral tilt angles in the nominally dry state, underwent the largest change in the B–O–B angles during hydration. Accommodating hydration through decreasing B–O–B angles is beneficial because it does not result in large lattice parameter changes. We propose an intermediate tolerance factor as a simple structural descriptor to enable near-zero hydration strains in proton-conducting perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Growth of Hexagonal Boron Nitride from Molten Nickel Solutions: A Reactive Molecular Dynamics Study

Metal flux methods are excellent for synthesizing high-quality hexagonal boron nitride (hBN) crystals, but the atomic mechanisms of hBN nucleation and growth in these systems are poorly understood and difficult to probe experimentally. Here, we harness classical reactive molecular dynamics (ReaxFF) to unravel the mechanisms of hBN synthesis from liquid nickel solvent over time scales up to 30 ns. These simulations mimic experimental conditions by including relatively large liquid nickel slabs containing dissolved boron and a molecular nitrogen gas phase. Overall, the reaction takes place almost exclusively on the surface of the liquid nickel, owing to the low solubility of nitrogen in bulk nickel and the intermediate species’ preference for the metal–gas interface. The formation of hBN invariably begins by reaction of dinitrogen with nickel-solvated boron atoms at the surface, forming intermediate N–N–B species, which typically evolve into B–N–B units through a short-lived intermediate where a single nitrogen atom is coordinated by one nitrogen and two boron atoms. The resulting B–N–B units, in turn, coalesce with growing hBN nuclei and carry nitrogen between hBN nanocrystals in an Ostwald ripening process. The amount of hBN produced on the tens of nanosecond time scale depends critically on the boron concentration, while having a much weaker dependence on the N 2 pressure for the regime considered (N 2 pressures of 2.5–10 MPa, Ni–B solutions with 6–12% boron by atom fraction). The highest rate of hBN formation occurs at the lowest temperature considered (1750 K, just above the melting point of nickel), while no hBN sheets are formed at 2000 K or above. An analysis of the transition pathways for nitrogen atoms shows that the final step, incorporation of small B–N motifs into larger hBN sheets, is the rate-limiting step in the regimes considered. While raising the temperature from 1750 to 2000 K has little effect on the formation of intermediates (N–N–B, B–N–B, etc.), the lack of large hBN sheets at temperatures >1900 K is explained by decreased probability of the final step and increased probability of breakup of hBN into B–N motifs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Structural Snapshots of Proteus vulgaris Tryptophan Indole-Lyase Reveal Insights into the Catalytic Mechanism

Tryptophan indole lyase (TIL; [E.C. 4.1.99.1]) is a bacterial pyridoxal-5′-phosphate (PLP)-dependent enzyme that catalyzes reversible β-elimination of indole from L-tryptophan. The mechanism of elimination of indole from L-tryptophan starts with the formation of an external aldimine of the substrate and PLP, followed by deprotonation of the α-CH of the substrate, forming a resonance-stabilized quinonoid intermediate. Proton transfer to C3 of the indole ring and carbon–carbon bond cleavage of the quinonoid intermediate provide indole and aminoacrylate bound to PLP, which then releases indole, followed by iminopyruvate. We have now determined the X-ray crystal structures of TIL complexes with (3S)-dioxindolyl-l-alanine, an inhibitor, and with substrates L-tryptophan, 7-aza-L-tryptophan, and S-ethyl-l-cysteine (SEC) in the presence of benzimidazole (BZI), an isostere of the product indole. These structures show a mixture of gem-diamine, external aldimine, quinonoid, and aminoacrylate intermediates, in both open and closed active site conformations. In the closed conformations of L-tryptophan, (3S)-dioxindolyl-l-alanine, and 7-aza-L-tryptophan complexes, hydrogen bonds form between Asp-133 with N1 of the ligand heterocyclic ring and NE2 of His-458 in the small domain of TIL. This hydrogen bond also forms in the BZI complex with the aminoacrylate intermediates formed from both L-tryptophan and SEC. The closed quinonoid complex of 7-aza-L-tryptophan shows that the azaindole ring in the closed conformation is bent out of plane of the Cβ–C3 bond by about 40°, putting it in a geometry that leads toward the transition-state geometry. Thus, both conformational dynamics and substrate activation play critical roles in the reaction mechanism of the TIL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗