Spectral reflectivities of the Galilean satellites and Titan, 0.32 to 0.86 micrometers
Explore the source record for details and available documents.
Nelson, R. M.↗
SEARCH · Search NASA
Results for “MICROMETER”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Luna 24: 90-150 micrometer fraction - Implications for remote sampling of regolith
An analysis of the mineral grains and glasses found in the 90 to 150 micron fraction of the Luna 24 core sample is presented and implications for the automatic collection of planetary and asteroidal regoliths are discussed. Electron microprobe analysis for pyroxene, olivine, plagioclase, opaque minerals and glass in samples at various depths indicate that polymineralic grains have compositions similar to those of gabbroic and basaltic fragments from coarser samples, while monomineralic grains contain an additional population of Mg-rich olivines and pyroxene. Most of the glasses are found to be related to mare basalts or local regolith, with nonmare material represented by glasses of highland basalt and low K Fra Mauro composition. It is concluded that as regards mineralogy and petrology, a single grab sample would have been as useful and a series of grab samples on a long traverse would have been more useful than the Luna 24 core sample, with the fine sample being more informative than the coarse.
Papp, H. A.↗
Electronic depth micrometer
Device for measuring depth or thickness reads distance of penetration by small-diameter probe. It was developed specifically to measure thickness of wet (uncured) insulation applied to Space Shuttle structures; thin probes penetrate wet insulation to substrate, and reference surface on gage is then positioned against outer surface of insulation to measure its thickness. Gage is easy to use, even by workers wearing gloves or other protective clothing, and allows remote reading and recording of production data.
Major, R. K.↗
Some n-p (Hg,Cd)Te photodiodes for 8-14 micrometer heterodyne applications
The results describing the dc and CO2 laser heterodyne characteristics of a three element photodiode array and single element and four element photodiode arrays are presented. The measured data shows that the n(+)-p configuration is capable of achieving bandwidths of 475 to 725 MHz and noise equivalent powers of 3.2 x 10 to the minus 20th power W/Hz at 77 K and 1.0 x 10 to the minus 19th power W/Hz at 145 K. The n(+)-n(-)-p photodiodes exhibited wide bandwidths (approximately 2.0 GHz) and fairly good effective heterodyne quantum efficiencies (approximately 13-30 percent at 2.0 GHz). Noise equivalent powers ranging from 1.44 x 10 to the minus 19th power W/Hz to 6.23 x 10 to the minus 20th power W/Hz were measured at 2.0 GHz.
Shanley, J. F.↗
Five-micrometer measurements of Uranus and Neptune
Five-micron brightness temperatures and brightness temperature upper limits for Uranus and Neptune have been obtained which are substantially lower than those of Jupiter and Saturn and which correspond to a geometric albedo of approximately 0.01, in agreement with results reported by Gillett and Rieke (1977). Phosphine and CH3D, which are observed at 5 microns on Jupiter and Saturn, are discussed as possible sources of opacity at 5 microns in the atmospheres of Uranus and Neptune.
Macy, W. W., Jr.↗
Submillimeter heterodyne detection of interstellar carbon monoxide at 434 micrometers
Laser heterodyne observations of submillimeter emissions from carbon monoxide in the Orion molecular cloud are reported. High frequency and spatial resolution observations were made at the NASA Infrared Telescope Facility on Mauna Kea by the use of an optically pumped laser local oscillator and quasi-optical Schottky diode mixer for heterodyne detection of the J = 6 - 5 rotational transition of CO at 434 microns. Spectral analysis of the 434-micron emission indicates that the emitting gas is optically thin and is at a temperature above 180 K. Results thus demonstrate the potential contributions of ground-based high-resolution submillimeter astronomy to the study of active regions in interstellar molecular clouds.
Fetterman, H. R.↗
Development of an earth resource pushbroom scanner utilizing a 90-element 8-14 micrometer /Hg,Cd/Te array
A detailed description is presented of thermal infrared 'pushbroom' scanners being developed for NASA's earth resources survey experiments in the middle to late 1980's. The devices offer high spectral, temporal and spatial resolution, and great reliability as well, due to simplicity of design. Their mode of operation does not require moving optics, since chopping and calibration are integral. The specific device described, a 90-element IR/CCD instrument, was developed to demonstrate scan imagery in the 8-14 micron spectral region in simulated aircraft tests. The scanning operation covers a straight-line path with a linear array of solid-state IR detectors, whose elements are activated sequentially in the cross-track direction while being swept forward along a flight path that, at an aircraft altitude of 10 km, is 7 km wide.
Brown, T. J.↗
Development of MBE grown Pb-salt semiconductor lasers for the 8.0 to 15.0 micrometer spectral region
Diodes lasers are fabricated using multiple source molecular beam expitaxial growth of (PbSn)Te on BaF2 substrates. Methods for crystal growth, crystal transfer, and device fabrication by photolithographic techniques were developed. The lasers operate in the spectra range from 10 microns to 14 microns and at temperatures from 12K to 60K continuous wave and to 95 K pulsed.
Miller, M. D.↗
Modelling of the 10-micrometer natural laser emission from the mesospheres of Mars and Venus
The NLTE radiative transfer problem is solved to obtain the 00 deg 1 vibrational state population. This model successfully reproduces the existing center-to-limb observations, although higher spatial resolution observations are needed for a definitive test. The model also predicts total fluxes which are close to the observed values. The strength of the emission is predicted to be closely related to the instantaneous near-IR solar heating rate.
Deming, D.↗
1.0 to 2.5 micrometer short wavelength infrared /SWIR/ linear array technology for low background applications
A design concept is presented for a hybrid linear focal plane array operating in the 1.0 to 2.5 micron band under low background conditions such as encountered in spaceborne missions. The concept is based on direct gate coupling of the input from a photovoltaic mercury-cadmium telluride detector into a CCD multiplexer. Theoretical analysis indicates a specific detectivity at peak wavelength on the order of 10 to the 12th cm sq rt Hz/W when the system is operating at 200 K. Values of the voltage responsivity, specific detectivity and the relative voltage noise levels of the coupled system obtained in experimental studies with direct-gate-coupled 4.0-micron detectors support the theoretical analysis performed for the case of system detectivity limited by the CCD 1/f noise.
Stobie, J.↗
Calculations of atmospheric transmittance in the 11 micrometer window for estimating skin temperature from VISSR infrared brightness temperatures
An algorithm for calculating the atmospheric transmittance in the 10 to 20 micro m spectral band from a known temperature and dewpoint profile, and then using this transmittance to estimate the surface (skin) temperature from a VISSR observation in the 11 micro m window is presented. Parameterizations are drawn from the literature for computing the molecular absorption due to the water vapor continuum, water vapor lines, and carbon dioxide lines. The FORTRAN code is documented for this application, and the sensitivity of the derived skin temperature to variations in the model's parameters is calculated. The VISSR calibration uncertainties are identified as the largest potential source of error.
Chesters, D.↗
Analysis of carbon dioxide bands near 2.2 micrometers
Carbon dioxide is one of the more important atmospheric infrared-absorbing gases due to its relatively high, and increasing, concentration. The spectral parameters of its bands are required for understanding radiative heat transfer in the atmosphere. The line intensities, positions, line half-widths, rotational constants, and band centers of three overlapping bands of CO2 near 2.2 microns are presented. Non-linear least squares (NLLS) regression procedures were employed to determine these parameters.
Abubaker, M. S.↗
Spectroscopic measurements of the 8- to 13-micrometer transmission of the upper atmosphere following the El Chichon eruptions
Infrared transmission spectra of the atmosphere above 11-km altitude were obtained at latitudes from 2 deg S to 50 deg N in December 1982. A circular variable-interference filter spectrometer mounted in a Convair 990 (the Galileo II) aircraft was used to obtain spectra of the sun through different air masses. Comparisons of spectra through different air masses provide atmospheric transmission measurements that show not only normal absorption features, such as those from CO2 and O3, but also additional absorption near 8.5 microns consistent with H2SO4 aerosols. The average fractional absorption from latitude 10 deg N to 41 deg N at 8.5 microns was 0.02/air mass, half of which was attributable to aerosols.
Witteborn, F. C.↗
Dense cores in dark clouds - Young embedded stars at 2 micrometers
Twenty-five visually opaque regions which contain strong sources of NH3 (1,1) line emission (dense cores) have been surveyed for evidence of associated stars at two microns. Five such stars have been found, of which three - in B5, L1489, and L1582 - are optically invisible and probably embedded in their associated cores. The stars in B5 and L1489 have 2-100 micron spectra and luminosity similar to those of HL Tau, a very young T Tauri star. These stars probably formed in the cores where they are now seen. These results tend to confirm earlier suggestions that low-mass stars form in dense cores.
Benson, P. J.↗
Survey of probable micrometer-sized Earth-orbital debris fragments in the NASA-JSC cosmic dust sample collection
A program to collect extraterrestrial dust samples from the stratosphere using impactors mounted on NASA U-2 and WB-57F aircraft is discussed. Sample collection, preparation, and analysis techniques are described and the particle types found are reviewed. Preliminary examination of the particles indicates that they represent not only extraterrestrial material, but some fraction of terrestrial contamination from both natural and manmade sources. This examination involves a combination of optical microscopy, scanning electron microscopy (SEM) and qualitative bulk elemental analysis using an energy-dispersive X-ray spectrometer (EDS) to characterize each particle. The cosmic dust collection contains samples of at least three classes of material that may present some hazard to extended spacecraft operations in near-Earth orbit: (1) micrometeorites/cosmic dust, (2) aluminum oxide spheres, and (3) alloy spherules and fragments.
Clanton, U. S.↗
Comparison of band model calculations of upper atmospheric cooling rates for the 15-micrometer carbon dioxide band
Within the atmosphere of the earth, absorption and emission of thermal radiation by the 15-micron CO2 bands are the largest contributors to infrared cooling rates in the stratosphere. Various techniques for calculating cooling rates due to these bands have been described. These techniques can be classified into one of two categories, including 'exact' or line-by-line calculations and other methods. The latter methods are based on broad band emissivity and band absorptance formulations. The present paper has the objective to present comparisons of the considered computational approaches. It was found that the best agreement with the exact line-by-line calculations of Fels and Schwarzkopf (1981) could be obtained by making use of a new Doppler band model which is described in the appendix of the paper.
Boughner, R. E.↗
Micro-Raman spectroscopy: The analysis of micrometer and submicrometer atmospheric aerosols
A nondestructive method of molecular analysis which is required to fully utilize the information contained within a collected particle is discussed. Upper atmosphere reaction mechanisms are assessed when the chemical compounds, the use of micro-Raman spectrometric techniques to perform micron and submicron particle analysis was evaluated. The results are favorable and it is concluded that micron and submicron particles can be analyzed by the micron-Raman approach. Completely automatic analysis should be possible to 0.3 micro m. No problems are anticipated with photo or thermal decomposition. Sample and impurity fluorescence are the key source of background as they cannot be completely eliminated.
Klainer, S. M.↗
More interstellar emission features at 3.3-3.6 micrometers!
The present data set consists of 3.20 to 3.55 micron spectra of HD44179, NGC 7027, BD+30 3639, and Elias 1 obtained with a cooled-grating array spectrometer (CGAS) at the NASA Infrared Telescope Facility. Emission features and details of the emission feature profiles are presented for high resolution spectra. Greater complexity is shown than might be expected. It is significant that the 3.29 micron feature has an invariant central wavelength, even at high resolution, and this strongly supports the case for a very specific substance or mixture of substances which is giving rise to this feature.
Tokunaga, A. T.↗