SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Rare gases in meteorites and lunar samples are discussed stimulating the discovery of the solar wind. Radioactive isotopes are examined, making a correlation to the origin of the solar system. It is shown that the heights of the peaks above the horizontal lines represent the spectrum of the fissiogenic sample. Nuclear tracks of iodine, xenon, and plutonium detected in lunar rocks are also explained.
We present a single Pressurized Water Reactor (PWR) 3-D fuel rod design for depletion analysis using BSOLVE, our newly developed Runge-Kutta-Fehlberg based depletion code. BSOLVE is coupled with the deterministic 3-D S{sub N} particle transport code, PENTRAN, applied here with a 4-neutron energy group comparison to Continuous Energy (C/E) SERPENT2 Monte Carlo results. Differences are expected, as PENTRAN+BSOLVE retains full (multi-group) energy information for reactions, nuclide specific fission contributions, and energy dependent fission yields, using the latest available ENDF-BVIII data, important to retain accurate burned fuel inventories; SERPENT2 collapses burnup reactions to a single energy value. For depletion times up to ∼ 700 days and typical PWR power densities, relative differences between multigroup 3-D S{sub N} with full energy data and Monte Carlo one group burnup for trans-uranium nuclide concentrations and fission products are up to ∼20%. System eigenvalues are consistent, but with differences early and late in the cycle attributed to multigroup vs. C/E Monte Carlo cross sections. This work highlights the importance of low variance transport driven burnup for non-proliferation concerns, since plutonium quality varies significantly along axial lengths, and is more challenging to converge using Monte Carlo; details of depletion steps with spatial/zone dependent plutonium quality are provided. (authors)
Californium-252 is an isotope commonly encapsulated as a physically small but strong spontaneous fission neutron source for applications in industry, academia, and research. Within the nuclear safeguards community, a well-characterized 252 Cf source is often used as an accessible alternative for plutonium in calibrations measurements, which require the absolute source strength. Current methods of source strength quantification can provide an accurate estimate, approximately 1% uncertainty under optimal conditions, but are typically costly and time consuming. An alternative method was developed to determine 252 Cf source strength using passive neutron correlation counting (PNCC). The PNCC method enables institutions and facilities to perform 252 Cf source calibration measurements in-house using detection systems that are common within the nuclear safeguards community. This novel method was previously successfully demonstrated using neutron multiplicity well counters. However, the previous evaluation utilized detection systems with high neutron detection efficiencies, greater than 60%. The purpose of the current study is to extend the previous evaluation and demonstrate the feasibility of the PNCC 252 Cf calibration method for suite of coincidence counters with lower neutron detection efficiencies, between 15% and 35%, which are more commonly encountered in the field, as well as to provide a step-by-step guide to using the method. The neutron source used in this evaluation was previously certified by the National Institutes of Science and Technology (NIST), which provides a reference for the accuracy of the PNCC method. In conclusion, the present source yield calculations demonstrate excellent agreement with a NIST calibration technique and achieve a standard uncertainty below the target 1%.
This report provides a performance summary of the “Isotopics by Nuclides” tool in InterSpec. The primary objective of the NA-241 FY25 project was the detection and characterization of non-homogeneous uranium samples. However, the tool also demonstrates effectiveness in determining the enrichment of homogeneous uranium or plutonium from single gamma spectra. This paper presents a subset of evaluated data to avoid distribution limitations while offering potential users’ insight into the tool's performance.
Precise knowledge of nuclear fission is a critical component for nuclear energy and stockpile stewardship research. Despite having been discovered over 80 years ago, fission is not fully described by a predictive theory, so thorough and accurate nuclear data libraries are necessary. These libraries provide information about the fission process in studied isotopes that is used in scientific and engineering models.
The Savannah River National Laboratory (SRNL) has been tasked by the National Nuclear Security Administration to recover highly valued isotopes from irradiated Mark-18A (Mk-18A) targets. The Savannah River Site (SRS) has sixty-five Mk-18A targets available for the recovery of the high valued materials. The Mk-18A targets were manufactured with Pu-242 then irradiated under high neutron flux in K-Reactor at the SRS from 1968 to 1978. The sixty-five Mk-18A targets are currently stored in the SRS L-Area Basin and will be removed one at a time and individually transported to SRNL. Upon receipt at SRNL, the Mk-18A target material will be removed from the confinement, dissolved, chemically separated, and calcined to a stable oxide. The flowsheet is designed to recover the plutonium as well as the trivalent actinides. The original targets were manufactured with varying quantities of Pu-242, ranging from 5.2 grams to 121.5 grams. Taking a graded approach to process start up, the lowest loaded target (FT-80-03) was selected as the first target to be received and processed at SRNL. As operational experience and knowledge is gained from processing targets, higher loaded targets will be selected for processing to increase the quantities of valuable isotopes recovered. Due to dose concerns, the receipt and processing of the Mk-18A targets is performed in the SRNL Shielded Cells Facility. The targets are stored in a double J-can confinement in the L-Area Basin. A specially designed cask was procured for transport of the targets from L-Area to SRNL. Once received at SRNL, the targets are loaded into the back of Cell 7 and resized as they enter the cell. The resized targets (1/4 length) are then processed one at a time through the following processes: caustic dissolution and filtration, acidic dissolution and filtration, elutable Reillex anion exchange, diglycolamide (DGA) resin extraction, and DGA calcination. This processing results in two product streams. The first is an aqueous plutonium solution which is removed from the shielded cells and taken to a glovebox for further purification and conversion to an oxide. The second is a calcined oxide product containing the Am and Cm as well as other lanthanide fission products which is removed from the shielded cells using a bagless transfer system. Both materials are packaged for shipment to Oak Ridge National Laboratory (ORNL). This paper will discuss the operating experience, lessons learned, and results from initial process hot startup.
A small laboratory-scale column process aimed at removing fission products from prototypical acidic sulfate solution wastes from a prototypical Mo-99 recovery process has been operated in a radioactive materials hood at Savannah River National Laboratory. This equipment has been operated with realistic concentrations of uranium (0.4 wt % 235 U), plutonium ( 239 Pu), neptunium ( 237 Np), non-radioactive surrogates of common fission products (including Cs and Sr) and two promising absorbents AMP-PAN and CST R91290-B. The goal of this work was to demonstrate the removal and concentration of high specific activity isotopes which are expected to dominate the classification of the low-level waste from the production of 99 Mo. Both AMP-PAN and CST R9120-B are attractive absorbents for the removal of 137 Cs from an acidic sulfate waste stream. They do not provide a solution for the removal of 90 Sr from the acidic solutions, but CST should be investigated at a higher pH. Limited removal of transuranic species and almost no removal of uranium was observed in this testing. This could be important due to the relatively large amount of uranium expected to be present in such waste streams. The capacity of these absorbents for 137 Cs will likely be dependent on the Cs concentration in the solutions processed but loading in the range of 0.2 to 5 mg Cs per gram of absorbent appears to be achievable.
A small laboratory-scale column process aimed at removing fission products from prototypical acidic sulfate solution wastes from a prototypical Mo-99 recovery process has been operated in a radioactive materials hood at Savannah River National Laboratory. This equipment has been operated with realistic concentrations of uranium (0.4 wt % 235 U), plutonium ( 239 Pu), neptunium ( 237 Np), non-radioactive surrogates of common fission products (including Cs and Sr) and two promising absorbents – AMP-PAN and CST R9120-B. The goal of this work was to demonstrate the removal and concentration of high specific activity isotopes which are expected to dominate the classification of the low-level waste from the production of 99 Mo. Both AMP-PAN and CST R9120-B are attractive absorbents for the removal of 137 Cs from an acidic sulfate waste stream. They do not provide a solution for the removal of 90 Sr from the acidic solutions. CST was shown to be useful at removing both Cs and Sr after adjustment of the acidic sulfate solution with sodium carbonate to pH 9. Limited removal of transuranic species and almost no removal of uranium was observed for CST R9120B absorbent. This could be important due to the relatively large amount of uranium expected to be present in such waste streams. The capacity of these absorbents for 137 Cs will likely be dependent on the Cs concentration in the solutions processed but loading in excess of 0.7 mg Cs per gram of CST absorbent while loading 0.14 mg Sr per gram of CST absorbent appears to be achievable from pH 9 carbonate solution.
Plutonium (Pu) source attribution would be a powerful tool to support nuclear nonproliferation efforts. This capability to find the source of a Pu sample would act as a deterrent to smuggling efforts, and also help regulatory agencies verify declared nuclear activities. Work at Texas A&M University yielded a nuclear forensics methodology, which is capable of determining separated Pu’s reactor of origin, fuel burnup, and the time since irradiation (TSI)—three parameters of interest. The methodology used a set of ten intra-element isotopic ratios found in separated Pu, which was compared to a library of isotopic ratio values produced using neutronics simulations for reactors of interest. By calculating the probability that unknown Pu sample’s isotopic ratio set matched a set in the library, the methodology could predict the three parameters of interest of the sample. One shortcoming of this methodology was an inability to correctly attribute spoofed Pu, where Pu sourced from two different reactors or two different fuel burnup levels are mixed. A new methodology to rectify this vulnerability using machine learning (ML) technique is developed, instead of the maximum likelihood calculation previously used and the results are satisfactory. The ML approach leverages the existing simulated data for training the algorithm, but use them efficiently by only using intra-element isotope ratios that contribute to the attribution one of the three parameters at a time. Previously, all isotope ratios were used to attribute all three parameters together. The new methodology attributes the Pu parameters in three steps, one for each parameter, rather than resolving all of the three parameters simultaneously like the previous maximum likelihood approach. First, a support vector machine classifier with a set of seven isotopic ratios finds the reactor of origin and a set of regression models trained using gaussian process predicts the burnup with a different set of seven isotopes. Finally, TSI is calculated analytically using decay equations. Thus far, the new methodology is capable of attributing pure Pu samples and has been validated using experimental data. The next step will to be augment the classifier training data set with spoofed Pu data.
Separation of neptunium by solvent extraction has been based on tributylphosphate (TBP) for decades, but TBP is not fully incinerable, which adds to the burden of long-lived radioactive waste. Alternatives to TBP for uranium and plutonium extraction, such as the N , N -diakylamides, previously have been explored in the hopes of transitioning to an extractant that is incinerable. Four N , N -diakylamides, N , N -dihexylhexanamide (DHHA), N , N -dihexyloctanamide (DHOA), N , N -di(2-ethylhexyl)butanamide (DEHBA), and N , N -di(2-ethylhexyl)-iso-butanamide (DEHiBA) were considered in this work for their potential to extract millimolar concentrations of Np(IV), Np(V), and Np(VI) from nitric acid solutions into organic solutions containing 1 M extractant in Exxsol D60. Furthermore, under these conditions the branching of the alkyl substituents affects the extractability of Np(VI) and Np(IV), causing three of the dialkylamides, DHHA, DHOA and DEHBA, to extract neptunium in the expected order Np(VI) > Np(IV) > > Np(V). In contrast, branched DEHiBA is so poor an extractant for Np(IV) that the extraction order becomes Np(VI) > > Np(V) > Np(IV) between 0.1 and 5.6 M HNO 3 due to partial oxidation of the Np(V) in nitric acid.
Neutron multiplicity counting is the most commonly used nondestructive assay technique for determining the plutonium mass within containers of scrap PuO 2 or mixed oxide (MOX). In multiplicity analysis, the 240 Pu eff mass, leakage multiplication, and alpha ratio (the ratio of [α, n]-to-spontaneous fission neutron production) are the three primary unknown sample properties. They must be determined simultaneously. To solve for these three unknowns in a multiplicity assay, three measured values are needed: the singles, doubles, and triples neutron count rates. While the analysis is limited to solving for three unknowns, there are many additional factors that impact the observed count rates and contribute to the measurement uncertainty. In this study we investigate the various uncertainty contributors for the multiplicity analysis through a combination of traditional uncertainty propagation techniques supplemented by Monte Carlo simulations to address the dependences not explicitly expressed by the point source model. Uncertainties arising from counting statistics, calibration parameters, calibration method, nuclear data, and various material characteristics (isotopic abundances, chemical form, density, and impurities) are considered. A Total Measurement Uncertainty (TMU) estimate is then developed from these uncertainty contributors. This study is confined to multiplicity analysis of items commonly encountered in international safeguards applications. That is, the study focused on Pu oxides and MOX materials for the masses ranging up to 4000 grams total Pu. Multiplicity measurements were simulated using MCNP V6 based on the Plutonium Scrap Multiplicity Counter (PSMC), Epithermal Multiplicity Counter (ENMC), Pyrochemical Multiplicity Counter, and Large Epithermal Multiplicity Counter (LEMC) for this study; however, this report focuses on the parameterization of the uncertainties for the PSMC. The performance differences between the PSMC and the other multiplicity counting systems are relatively small, primarily manifesting in the impact on measurement precision so that the evaluation developed for the PSMC can be applied to the other multiplicity counting systems. Finally an analysis tool, the Multiplicity TMU Estimator, was developed from this study to serve as an aid for evaluation of the total measurement uncertainty of multiplicity assay results obtained from the commonly used INCC acquisition and analysis software.
Traces of Pu have been detected in material released from the Fukushima Daiichi Nuclear Power Plant (FDNPP) in March of 2011; however, to date the physical and chemical form of the Pu have remained unknown. Here we report the discovery of particulate Pu associated with cesium-rich microparticles (CsMPs) that formed in and were released from the reactors during the FDNPP meltdowns. The Cs-pollucite-based CsMP contained discrete U(IV)O 2 nanoparticles, <~10 nm, one of which is enriched in Pu adjacent to fragments of Zr-cladding. The isotope ratios, 235 U/ 238 U, 240 Pu/ 239 Pu, and 242 Pu/ 239 Pu, of the CsMPs were determined to be ~0.0193, ~0.347, and ~0.065, respectively, which are consistent with the calculated isotopic ratios of irradiated-fuel fragments. Thus, considering the regional distribution of CsMPs, the long-distance dispersion of Pu from FNDPP is attributed to the transport by CsMPs that have incorporated nanoscale fuel fragments prior to their dispersion up to 230 km away from the Fukushima Daiichi reactor site.
To support the Laboratory’s pit mission, the Associate Laboratory Directorate for Plutonium Infrastructure on January 31, 2022, took the first step in establishing operations at TA-55 that run 24 hours a day, seven days a week.
Abstract: H3D Inc. introduced a new type of CZT detectors with resolution several times better than that of a typical CZT; The current FRAM v.6.1 can analyze uranium spectra with minimal modification of the parameter sets and get acceptable results; The exceptionally large high-energy tail of the peaks makes it difficult to achieve good uranium results and impossible to successfully analyze plutonium spectra; The FRAM code needed to be modified to better fit the high-energy tail of the peaks to analyze plutonium data and to get better uranium analysis results.
NIOWAVE, Inc. is a domestic supplier of medical and industrial isotopes from uranium and radium. The Savannah River National laboratory (SRNL) is currently providing support to NIOWAVE, which plans to deploy a superconducting electron linear accelerator (LINAC) to fission uranium for Mo-99 production without the need for a nuclear reactor or HEU. The uranium from the Mo-99 production targets will be purified using a modified PUREX (Plutonium Uranium Reduction Extraction) solvent extraction process to recover the uranium in the product stream. The uranium will then be precipitated as an oxalate which is calcined to U 3 O 8 to fabricate pellets for new Mo-99 targets. In previous support provided to NIOWAVE, the SRNL demonstrated a solvent washing process to remove degradation products from the tributyl phosphate (TBP) solvent used in the modified PUREX process under development for uranium recovery. To supplement this technology demonstration, NIOWAVE requested the SRNL to provide summary information on the solvent recovery and management activities which are used at the Savannah River Site (SRS) H-Canyon facility. An existing reference document for the reprocessing of irradiated HEU fuels at the SRS was used as the primary reference for the solvent management activities; although, other reference documents were used to provide supplementary information. The information provided includes a brief summary of the solvent degradation issues which have been observed in the H-Canyon solvent extraction cycles and resulting process safety concerns. The solvent recovery processes for the three cycles of solvent extraction used in the H-Canyon were subsequently described including the process equipment which consists of the continuous and batch solvent washers, pumps, and tanks. A final section is provided on the monitoring and analysis of solvent quality based on the previous work performed at the SRNL for NIOWAVE and past research and development activities performed to support the solvent extraction processes in both the SRS F-Canyon and H-Canyon facilities.
UO 2 2+ binds to the surface of a tripolyphosphate modified mesoporous indium tin-doped oxide electrode (nanoITO|P 3 ). Electrochemical studies reveal that nITO|P 3 electrodes catalyze the 2-electron interconversion between UO 2 2+ and U 4+ with the P 3 -ligand assisting in the rate-limiting proton-coupled reduction of U(V) to U(IV), based on the kinetic isotope effect (1.8). Product composition between nITO|P 3 (U 4+ ) and surface adsorbed UO 2 can be controlled by adjusting the proton concentration and/or scan rate in voltammograms. Furthermore these studies with uranium suggest that nITO|P 3 electrodes are good candidates for redox transformations with other actinides including neptunium, plutonium, and americium.
Information about elemental and isotopic systematics of ultra-trace level actinides (e.g. U and Pu) and main group elements (e.g. Ti) present within nuclear grade graphite is vital to the nuclear community for improved reactor operation and security. In support of this, extensive effort has been placed on improving analysis methods (i.e., inductively coupled plasma-mass spectrometry). However, significantly less effort has been devoted to the optimization of chemical separation methods. Within the separation community, commercially available Eichrom™ resins are often employed, as their elution characteristics for various elements have been well studied, but the direct optimization of actinides and trace metal separations from a single sample have not been widely investigated. Here, methods using various Eichrom pre-packed cartridges were explored to achieve separation of ultra-trace levels of U, Pu, and Ti from a variety of graphite samples. Once the validity of the combined separation scheme was established using certified reference materials, the method was applied to historic, unirradiated and irradiated, graphite samples. For all samples investigated, precise isotope ratio measurements for the titanium isotope systems were made.
Independent gamma spectroscopy data analysis of a plutonium oxide sample was requested on July 23, 2021. The primary request was to assess the Pu-239 activity/mass of the sample using previously collected gamma spectral data. Using the provided gamma spectral analysis report and spectral files, an independent evaluation of the data was conducted without any prior knowledge of the isotopic activity/mass of the sample.