Search NASA⌕ Search

SEARCH · Search NASA

Results for “SEMICONDUCTOR DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Detection of ferromagnetic domain wall pinning and depinning with a semiconductor device

We demonstrate the detection of a ferromagnetic domain wall using a nanoscale Hall cross. A narrow permalloy wire is defined lithographically on top of a Hall cross fabricated from an InAs quantum well. The width of the Hall cross (500 nm–1 μm) is similar to the width of the ferromagnetic wire (200–500 nm), and a geometric pinning site is fabricated in the ferromagnetic wire to trap a domain wall within the area of the Hall cross. The devices provide a signal that is often the same order of magnitude as the offset Hall voltage when a domain wall is located above the Hall cross, and may be useful for memory applications. Different geometries for the Hall cross and ferromagnetic wire are tested, and radiofrequency pulses are sent into the wire to demonstrate current driven domain wall motion. Further changes to the Hall bar geometry with respect to the wire geometry are investigated by numerical computation. A large gain in signal is seen for Hall bars only slightly wider than the ferromagnetic wires as compared to those twice as wide, as well as a larger sensitivity to the exact position of the domain wall with respect to the center of the Hall cross.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of recombination, dissociation, and competition between exciton-charge reactions in magnetoconductance of polymeric semiconductor device

Magnetoelectrical measurements were performed on a diode structure, based on an anthracene-containing poly(arylene-ethynylylene)-alt-poly(arylene-vinylene) denoted AnE-PVstat, to clarify the role of the recombination and dissociation of electron-hole (e-h) pairs in the magnetoconductance (MC). We report the observed MC under a weak magnetic field (<1 T) at room and low temperatures. Positive MC is observed and reaches up to 2% at a magnetic field of 450 mT at room temperature. It is found that with the increase of the voltage, the MC effect decreases. We also report the difference in MC between perpendicular (θ = 90°) and parallel (θ = 0°) alignment of magnetic field with respect to the current direction. The experimental data were analyzed in the context of the e-h pair model, based on the Stochastic Liouville Equation. To interpret the experimental results on magnetoconductance measurements, anisotropic hyperfine interaction has been introduced through an anisotropic hyperfine field. The dissociation rates q{sub S} and q{sub T} of the singlet and triplet e-h pairs were determined from the best fit with experimental curves and are about 10{sup 5 }s{sup −1}, while the recombination rates of the singlet and triplet e-h pairs are k{sub S} ∼ 10{sup 9 }s{sup −1} and k{sub T} ∼ 10{sup 5 }s{sup −1}, respectively. At low temperatures (T < 60 K), an unexpected “sign-reversal phenomenon” of the magnetoconductance is observed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low damage etching method of low-k material with a neutral beam for interlayer dielectric of semiconductor device

To reduce the cross-talk between nanoscale devices, low-k materials such as methyl silsesquioxane (MSQ), which is damaged easily during plasma etching, are introduced as an intermetallic dielectric material in addition to the use of copper as the conducting material for the reduction of parasitic resistance and capacitance. In this study, beam techniques such as neutral/ion beams were used in the etching of MSQ and the effect of these beam techniques on the reduction of the degradation of the MSQ were investigated. When MSQ was etched using the same CF{sub 4} etch gas at the similar etch rate as that used for conventional MSQ etching using inductively coupled plasmas (ICPs), the neutral/ion beam etching showed lower F contents and lower penetration depth of F, indicating decreased degradation by fluorination of MSQ during etching using the beam techniques. Especially, the neutral beam etching technique showed the lowest F contamination and the lower penetration depth of F among the etch methods. When the dielectric constant was measured after the etching of the same depth, the MSQ etched with the neutral beam showed the lowest change of the dielectric constant, while that etched using the ICP showed the highest change of dielectric constant. The lower degradation, that is, the lower chemical modification of MSQ material with the beam technique is believed to be related to the decreased concentration of radical species in the processing chamber reacting with the MSQ surface, while the lowest degradation using the neutral beam is believed to be due to the lower reaction rate of the reactive neutral compared to reactive ions.

36 MATERIALS SCIENCE↗

Method for fabricating an interconnected array of semiconductor devices

A method of forming an array of interconnected solar cells. A flexible substrate carrying semiconductor and conductive layers is divided into individual devices by slitting the substrate along the web length. The individual devices are then connected with one another in series by laminating the substrate onto an insulating backing and by depositing conducting interconnection layers which join the lower conductor of one device with the top conductor of the adjoining device.

Grimmer, Derrick P.↗

Use of vacuum tubes in test instrumentation for measuring characteristics of fast high-voltage semiconductor devices

Circuits are described that permit measurement of fast events occurring in power semiconductors. These circuits were developed for the dynamic characterization of transistors used in inductive-load switching applications. Fast voltage clamping using vacuum diodes is discussed, and reference is made to a unique circuit that was built for performing nondestructive, reverse-bias, second-breakdown tests on transistors.

Berning, D.↗

A quantum energy transport model for semiconductor device simulation

This paper describes numerical methods for a quantum energy transport (QET) model in semiconductors, which is derived by using a diffusion scaling in the quantum hydrodynamic (QHD) model. We newly drive a four-moments QET model similar with a classical ET model. Space discretization is performed by a new set of unknown variables. Numerical stability and convergence are obtained by developing numerical schemes and an iterative solution method with a relaxation method. Numerical simulations of electron transport in a scaled MOSFET device are discussed. The QET model allows simulations of quantum confinement transport, and nonlocal and hot-carrier effects in scaled MOSFETs.

97 MATHEMATICS AND COMPUTING↗

Semiconductor devices for optical communications in 1 micron band of wavelength

Crystal growth and the characteristics of semiconductor lasers and diodes for the long wavelength band used in optical communications are examined. It is concluded that to utilize the advantages of this band, it is necessary to have a large scale multiple wavelength communication, along with optical cumulative circuits and optical exchangers.

Suematsu, Y.↗

Skutterudite Compounds For Power Semiconductor Devices

New semiconducting materials with p-type carrier mobility values much higher than state-of-art semiconductors discovered. Nine compounds, antimonides CoSb(sub3), RhSb(sub3), IrSb(sub3), arsenides CoAs(sub3), RhAs(sub3), IrAs(sub3), and phosphides CoP(sub3), RhP(sub3) and IrP(sub3), exhibit same skutterudite crystallographic structure and form solid solutions of general composition Co(1-x-y)RH(x)Ir(y)P(1-w-z)As(w)Sb(z). Materials exhibit high hole mobilities, high doping levels, and high electronic figures of merit. Some compositions show great potential for application to thermoelectric devices.

Fleurial, Jean-Pierre↗

Apparatus for measuring semiconductor device resistance

A test structure is described for enabling the accurate measurement of the resistance characteristics of a semiconductor material and includes one or more pairs of electrical terminals disposed on the surface of the material to enable measurements of the resistance encountered by currents passed between the terminals. A pair of terminals includes a first terminal extending in a closed path, such as a circle, around a second terminal, so that all currents flowing between the terminals flow along a region of known width and length. Two or more pairs of concentric terminals can be utilized, wherein the ratio of radii of each pair of terminals is the same as the ratio for all other pairs of terminals, to facilitate the calculation of the contact resistance between each terminal and the semiconductor surface, as well as the calculation of the resistance of the semiconductor material apart from the effect of the terminal to semiconductor contact resistances.

Matzen, W. J.↗

Modeling direct band-to-band tunneling: From bulk to quantum-confined semiconductor devices

A rigorous framework to study direct band-to-band tunneling (BTBT) in homo- and hetero-junction semiconductor nanodevices is introduced. An interaction Hamiltonian coupling conduction and valence bands (CVBs) is derived using a multiband envelope method. A general form of the BTBT probability is then obtained from the linear response to the “CVBs interaction” that drives the system out of equilibrium. Simple expressions in terms of the one-electron spectral function are developed to compute the BTBT current in two- and three-dimensional semiconductor structures. Additionally, a two-band envelope equation based on the Flietner model of imaginary dispersion is proposed for the same purpose. In order to characterize their accuracy and differences, both approaches are compared with full-band, atomistic quantum transport simulations of Ge, InAs, and InAs-Si Esaki diodes. As another numerical application, the BTBT current in InAs-Si nanowire tunnel field-effect transistors is computed. It is found that both approaches agree with high accuracy. The first one is considerably easier to conceive and could be implemented straightforwardly in existing quantum transport tools based on the effective mass approximation to account for BTBT in nanodevices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Grazing-Incidence Texture Tomography and Diffuse Reflectivity Tomography of an Organic Semiconductor Device Array

The use of grazing-incidence scattering methods for the characterization of 2D patterned organic thin films is limited due to the elongated 1D footprint of the X-ray beam on the sample. However, this characteristic feature can be turned into an advantage, when combined with tomographic reconstruction. In this pilot study we show, how the use of a chosen texture reflection and a diffuse reflectivity signal can each provide 2D images of the deposits, simultaneously revealing the organic film's crystal orientation and the location of the metal electrodes in a field-effect transistor structure from a single sequence of diffraction images.

36 MATERIALS SCIENCE↗

Communication satellite output devices

Semiconductor devices, tunnel diodes, transistors, varactor diodes, vacuum tube amplifiers, triodes, klystrons, and traveling wave tubes for communication satellite output devices

VACUUM TUBE↗

First-principles simulations of 2-D semiconductor devices: Mobility, I-V characteristics, and contact resistance

We report in this paper ab-initio quantum transport simulations of different types of single-layer 2-D semiconductors: transition metal and group IV dichalcogenides in the 2H or 1T phase as well as black phosphorus. The electron and hole phonon-limited mobilities of eight selected 2-D crystals are first analyzed before using these materials as n- or p-type channels of ultra-scaled single-gate transistors, computing their I-V characteristics in the presence of electron-phonon scattering, and comparing them to each other. Finally, the properties of metal-MoS 2 contacts are investigated. It is revealed that the current tends to flow at the edge of the metal layer before entering the semiconductor, thus limiting the injection efficiency.

Luisier, M.↗