Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Ion-beam-sputter modification of the surface morphology of biological implants

The surface chemistry and texture of materials used for biological implants may significantly influence their performance and biocompatibility. Recent interest in the microscopic control of implant surface texture has led to the evaluation of ion-beam sputtering as a potentially useful surface roughening technique. Ion sources, similar to electron-bombardment ion thrusters designed for propulsive applications, are used to roughen the surfaces of various biocompatible alloys or polymer materials. These materials are typically used for dental implants, orthopedic prostheses, vascular prostheses, and artificial heart components. Masking techniques and resulting surface textures are described along with progress concerning evaluation of the biological response to the ion-beam-sputtered surfaces.

Weigand, A. J.↗
NASA NTRS1975

Seismically induced modification of lunar surface features

The formation of large impact craters and basins produced not only large volumes of ejecta but also catastrophic seismic waves. Theoretical models, extrapolation of terrestrial explosion data, and extrapolation of lunar impact data suggest surface displacements of 1-10 m at four crater radii from a Copernicus-size impact (4 x 10 to the 30th power ergs). Independent estimates of impact-generated stresses indicate that regions within 4 crater radii of an impact will receive shock waves with pressures exceeding 1 kbar. Greater areas also may receive shock effects as elastic waves following deep ray paths transform into shock waves near the surface. Additional seismic energy will be generated by impacts from secondary ejecta. The resulting large and long-lasting surface movement may contribute to the subdued appearance of the continuous ejecta blanket and secondary craters around large impact craters and to the degradation of small craters outside these zones.

Schultz, P. H.↗
NASA NTRS1984

Chemical Modification of the Surface of High Modulus Carbon Fibers

The deposition of selected monomers on the surface of high modulus carbon fibers was studied. The fundamental principles which provide the basis for the design of a predictable interfacial bond between carbon fibers and polymeric matrices are described.

Source record↗
NASA NTRS1987

Physical and chemical modification of the surface of Venus by windblown particles

The results of simulations of the Venusian surface environment involving windblown grains are presented which show that significant chemical and physical changes may occur even in the slow-moving winds recorded on Venus. The edges of grains beome worn and shed comminuted debris, which collects on weathered surfaces and grains alike. The resulting transfer of material from loose grains to bedrock surfaces (and vice versa) could yield misleading results on rock composition; moreover, the generation of comminuted debris would enhance chemical reactions that could affect the composition of the atmosphere. The results are thus relevant in assessing rates of surface degradation, the evolution of small-scale surface features as seen in images returned from the Soviet Venera missions, and in the interpretation of compositional data for surface materials.

Greeley, Ronald↗
NASA NTRS2006

Stability of Atmospheric-Pressure Plasma Induced Changes on Polycarbonate Surfaces

Polycarbonate films are subjected to plasma treatment in a number of applications such as improving adhesion between polycarbonate and silicon alloy in protective and optical coatings. The changes in surface chemistry due to plasma treatment have tendency to revert back. Thus stability of the plasma induced changes on polymer surfaces over desired time period is very important. The objective of this study was to examine the effect of ageing on atmospheric pressure helium-plasma treated polycarbonate (PC) sample as a function of treatment time. The ageing effects were studied over a period of 10 days. The samples were plasma treated for 0.5, 2, 5 and 10 minutes. Contact angle measurements were made to study surface energy changes. Modification of surface chemical structure was examined using, X-ray Photoelectron Spectroscopy (XPS). Contact angle measurements on untreated and plasma treated surfaces were made immediately, 24, 48, 72 and 96 hrs after treatment. Contact angle decreased from 93 deg for untreated sample to 30 deg for sample plasma treated for 10 minutes. After 10 days the contact angles for the 10 minute plasma treated sample increased to 67 deg, but it never reverted back to that of untreated surface. Similarly the O/C ratio increased from 0.136 for untreated sample to 0.321 for 10 minute plasma treated sample indication increase in surface energy.

Sharma, Rajesh↗
NASA NTRS2013

Combining Satellite Data and Models to Assess the Impacts of Urbanization on the Continental US Surface Climate

Urbanization is one of the most important and long lasting forms of land transformation. Urbanization affects the surface climate in different ways: (1) by reduction of the vegetation fraction causing subsequent reduction in photosynthesis and plant s water transpiration, (2) by alternation of surface runoff and infiltration and their impacts on soil moisture and the water table, (3) by change in the surface albedo and surface energy partitioning, and (4) by transformation of the surface roughness length and modification of surface fluxes. Land cover and land use change maps including urban areas have been developed and will be used in a suite of land surface models of different complexity to assess the impacts of urbanization on the continental US surface climate. These maps and datasets based on a full range of available satellite data and ground observations will be used to characterize distant-past (pre-urban), recent-past (2001), present (2010), and near future (2020) land cover and land use changes. The main objective of the project is to assess the impacts of these land transformation on past, current and near-future climate and the potential feedbacks from these changes on the atmospheric, hydrologic, biological, and socio-economic properties beyond the immediate metropolitan regions of cities and their near suburbs. The WRF modeling system will be used to explore the nature and the magnitude of the two-way interactions between urban lands and the atmosphere and assess the overall regional dynamic effect of urban expansion on the northeastern US weather and climate

Bounoua, L.↗
NASA NTRS1992

Antenna pattern control using impedance surfaces

The modification of a moment method code is described. Analyses of horn antennas were conducted extensively. Excellent agreements with measured results were observed for pyramidal horn antennas with perfectly conducting surfaces. The predicted results are so accurate that even the finest ripple structures in the far-field radiation patterns are computed correctly. Preliminary results for the radiation patterns of pyramidal horns with impedance surfaces were also obtained. Discussions of using the code in accurate modeling of practical pyramidal horn antennas are also included. After the code for the analysis of the horn antennas with impedance materials is finalized, the synthesis problem will be examined in the coming research period.

Balanis, Constantine A.↗
NASA NTRS2011

Boundary Layer Transition over Blunt Hypersonic Vehicles Including Effects of Ablation-Induced Out-Gassing

Computations are performed to study the boundary layer instability mechanisms pertaining to hypersonic flow over blunt capsules. For capsules with ablative heat shields, transition may be influenced both by out-gassing associated with surface pyrolysis and the resulting modification of surface geometry including the formation of micro-roughness. To isolate the effects of out-gassing, this paper examines the stability of canonical boundary layer flows over a smooth surface in the presence of gas injection into the boundary layer. For a slender cone, the effects of out-gassing on the predominantly second mode instability are found to be stabilizing. In contrast, for a blunt capsule flow dominated by first mode instability, out-gassing is shown to be destabilizing. Analogous destabilizing effects of outgassing are also noted for both stationary and traveling modes of crossflow instability over a blunt sphere-cone configuration at angle of attack.

Li, Fei↗
NASA NTRS2008

Modifications to the Fission Surface Power Primary Test Circuit (FSP-PTC)

An actively pumped alkali metal flow circuit, designed and fabricated at the NASA Marshall Space Flight Center, underwent a range of tests at MSFC in early 2007. During this period, system transient responses and the performance of the liquid metal pump were evaluated. In May of 2007, the circuit was drained and cleaned to prepare for multiple modifications: the addition of larger upper and lower reservoirs, the installation of an annular linear induction pump (ALIP), and the inclusion of a closeable orifice in the test section. Modifications are now complete and testing has resumed. Performance of the ALIp, provided by Idaho National Laboratory (INL), is the subject of the first round ofexperimentation. This paper provides a summary of the tests conducted on the original circuit, details the physical changes that have since been made to it, and describes the current test program.

Garber, Anne E.↗
NASA NTRS1997

Texture Modification of the Shuttle Landing Facility Runway at Kennedy Space Center

This paper describes the test procedures and the criteria used in selecting an effective runway-surface-texture modification at the Kennedy Space Center (KSC) Shuttle Landing Facility (SLF) to reduce Orbiter tire wear. The new runway surface may ultimately result in an increase of allowable crosswinds for launch and landing operations. The modification allows launch and landing operations in 20-knot crosswinds, if desired. This 5-knot increase over the previous 15-knot limit drastically increases landing safety and the ability to make on-time launches to support missions in which Space Station rendezvous are planned. The paper presents the results of an initial (1988) texture modification to reduce tire spin-up wear and then describes a series of tests that use an instrumented ground-test vehicle to compare tire friction and wear characteristics, at small scale, of proposed texture modifications placed into the SLF runway surface itself. Based on these tests, three candidate surfaces were chosen to be tested at full-scale by using a highly modified and instrumented transport aircraft capable of duplicating full Orbiter landing profiles. The full-scale Orbiter tire testing revealed that tire wear could be reduced approximately by half with either of two candidates. The texture-modification technique using a Humble Equipment Company Skidabrader(trademark) shotpeening machine proved to be highly effective, and the entire SLF runway surface was modified in September 1994. The extensive testing and evaluation effort that preceded the selection of this particular surface-texture-modification technique is described herein.

Daugherty, Robert H.↗
NASA NTRS1975

Theoretical effect of modifications to the upper surface of two NACA airfoils using smooth polynomial additional thickness distributions which emphasize leading edge profile and which vary quadratically at the trailing edge

An investigation was conducted on a CDC 7600 digital computer to determine the effects of additional thickness distributions to the upper surface of the NACA 64-206 and 64 sub 1 - 212 airfoils. The additional thickness distribution had the form of a continuous mathematical function which disappears at both the leading edge and the trailing edge. The function behaves as a polynomial of order epsilon sub 1 at the leading edge, and a polynomial of order epsilon sub 2 at the trailing edge. Epsilon sub 2 is a constant and epsilon sub 1 is varied over a range of practical interest. The magnitude of the additional thickness, y, is a second input parameter, and the effect of varying epsilon sub 1 and y on the aerodynamic performance of the airfoil was investigated. Results were obtained at a Mach number of 0.2 with an angle-of-attack of 6 degrees on the basic airfoils, and all calculations employ the full potential flow equations for two dimensional flow. The relaxation method of Jameson was employed for solution of the potential flow equations.

Merz, A. W.↗
NASA NTRS1975

Theoretical effect of modifications to the upper surface of two NACA airfoils using smooth polynomial additional thickness distributions which emphasize leading edge profile and which vary linearly at the trailing edge

An investigation was conducted on a CDC 7600 digital computer to determine the effects of additional thickness distributions to the upper surface of airfoils. The additional thickness distribution had the form of a continuous mathematical function which disappears at both the leading edge and the trailing edge. Results were obtained at a Mach number of 0.2 with an angle of attack of 6 deg. All calculations employed the full potential flow equations for two dimensional flow. The relaxation method of Jameson was used for solution of the potential flow equations. It is shown that increasing the thickness and variations in shape increases the lift and the adverse pitching moment coefficients.

Hague, D. S.↗
NASA NTRS2001

The Modification of Mars Fluvial Surfaces

The identification of fluvial deposits on Mars is impaired by modifying geological processes. An analysis of surface patterns of superimposed dunes and channels in paleoflood environments in Washington State and Australia can yield information on buried surfaces. Additional information is contained in the original extended abstract.

Bourke, M. C.↗