Search NASA⌕ Search

SEARCH · Search NASA

Results for “VOLTAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

The current–voltage and capacitance–voltage characteristics at high temperatures of Au Schottky contact to n-type GaAs

Highlights: • The electronic parameters of the diode under temperature were investigated. • The barrier heights have a Gaussian distribution. • Au/n-GaAs diode exhibits a rectification behavior. - Abstract: We have investigated the temperature-dependent current–voltage (I–V) and capacitance–voltage (C–V) characteristics of Au/n-GaAs Schottky barrier diodes (SBDs) in the temperature range of 280–415 K. The barrier height for the Au/n-type GaAs SBDs from the I–V and C–V characteristics have varied from 0.901 eV to 0.963 eV (I–V) and 1.234 eV to 0.967 eV (C–V), and the ideality factor (n) from 1.45 to 1.69 in the temperature range 280–415 K. The conventional Richardson plots are found to be linear in the temperature range measured. Both the ln(I{sub 0}/T{sup 2}) versus (kT){sup −1} and ln(I{sub 0}/T{sup 2}) versus (nkT){sup −1} plots gives a straight line corresponding to activation energies 0.773 eV and 0.870 eV, respectively. A Φ{sub b0} versus 1/T plot was drawn to obtain evidence of a Gaussian distribution of the BHs, and values of Φ{sup ¯}{sub b0} = 1.071 eV and σ{sub 0} = 0.094 V for the mean BH and zero-bias standard deviation have been obtained from this plot.

36 MATERIALS SCIENCE↗

Simultaneous Increase in Open-Circuit Voltage and Efficiency of Fullerene-Free Solar Cells through Chlorinated Thieno[3,4- b ]thiophene Polymer Donor

The chlorinated polymer, PBTCl, has been found to be an efficient donor in nonfullerene polymer solar cells (PSCs), which showed a blue-shifted absorbance compared to that of its fluorine analogue (PTB7-th) and resulted in more complementary light absorption with a nonfullerene acceptor, such as ITIC. Meanwhile, chlorine substitution lowered the HOMO level of PBTCl, which increased the open-circuit voltage of the corresponding polymer-based devices. The 2D GIWAXS analysis illustrated that the PBTCl/ITIC blend film exhibited a “face-on” orientation and scattering features of both PBTCl and ITIC, suggesting that the blend of PBTCl and ITIC was phase-separated and formed individual crystalline domains of the donor and acceptor, which promoted charge transfer in the bicontinuous film and eventually elevated the solar energy conversion efficiency. The PBTCl-based nonfullerene PSC exhibited a maximum PCE of 7.57% with a Voc of 0.91 V, which was an approximately 13% increasing in the PCE compared to that of the fluorine-analogue-based device.

36 MATERIALS SCIENCE↗

Minimizing Current and Voltage Losses to Reach 25% Efficient Monolithic Two-Terminal Perovskite–Silicon Tandem Solar Cells

The rapid rise in efficiency and tunable bandgap of metal-halide perovskites makes them highly attractive for use in tandems on silicon. Recently we demonstrated a perovskite–silicon monolithic two-terminal tandem with 23.6% power conversion efficiency. Here, we present work on optical optimization to improve light harvesting that includes thinning out the top transparent electrode to reduce front-surface reflection and parasitic absorption; introducing metal fingers to minimize series resistance losses; and further minimizing reflection loss with a polydimethylsiloxane (PDMS) stamp with random, pyramidal texture. Additionally, to reduce voltage loss while achieving current matching, we employ poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) as a hole transport material instead of NiO x and a wider 1.68 eV bandgap perovskite composition. Furthermore, these optimizations boost the open-circuit voltage to 1.77 V and the short-circuit current density to 18.4 mA/cm 2 , culminating in a 25% efficient perovskite–silicon tandem with a 1 cm 2 active area.

14 SOLAR ENERGY↗

Quaternary structure independent folding of voltage-gated ion channel pore domain subunits

Every voltage-gated ion channel (VGIC) has a pore domain (PD) made from four subunits, each comprising an antiparallel transmembrane helix pair bridged by a loop. The extent to which PD subunit structure requires quaternary interactions is unclear. In this report we present crystal structures of a set of bacterial voltage-gated sodium channel (BacNa V ) 'pore only' proteins that reveal a surprising collection of non-canonical quaternary arrangements in which the PD tertiary structure is maintained. This context-independent structural robustness, supported by molecular dynamics simulations, indicates that VGIC-PD tertiary structure is independent of quaternary interactions. This fold occurs throughout the VGIC superfamily and in diverse transmembrane and soluble proteins. Strikingly, characterization of PD subunit-binding Fabs indicates that non-canonical quaternary PD conformations can occur in full-length VGICs. Together, our data demonstrate that the VGIC-PD is an autonomously folded unit. This property has implications for VGIC biogenesis, understanding functional states, de novo channel design, and VGIC structural origins.

59 BASIC BIOLOGICAL SCIENCES↗

A magnesium–sodium hybrid battery with high operating voltage

Here, we report a high performance magnesium-sodium hybrid battery utilizing a magnesium-sodium dual-salt electrolyte, a magnesium anode, and a Berlin green cathode. The cell delivers an average discharge voltage of 2.2 V and a reversible capacity of 143 mA h g –1 . We also demonstrate the cell with an energy density of 135 W h kg –1 and a high power density of up to 1.67 kW kg –1 .

25 ENERGY STORAGE↗

A simple approximation for the current-voltage characteristics of high-power, relativistic diodes

A simple approximation for the current-voltage characteristics of a relativistic electron diode is presented. The approximation is accurate from non-relativistic through relativistic electron energies. Although it is empirically developed, it has many of the fundamental properties of the exact diode solutions. The approximation is simple enough to be remembered and worked on almost any pocket calculator, so it has proven to be quite useful on the laboratory floor.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Insulator–metal transition induced by electric voltage in a ruthenate Mott insulator

We report the observation of electric-voltage induced insulator–metal phase transition in a ruthenate Mott insulator Ca 3 (Ru 0.9 Ti 0.1 ) 2 O 7 . We show that the electric field effect dominates and leads to a sharp phase transition at measurement temperatures far below the Mott transition, whereas the thermal effect becomes more significant and broadens the phase transition as the measurement temperature approaches the insulator–metal transition. Here, the electric field induced insulator–metal transition is presumably attributed to the avalanche breakdown of the correlated insulating state when driven out of equilibrium. This work highlights the strategy of using electric voltage to control the phase transition of this system in addition to other nonthermal parameters such as magnetic field and pressure reported previously.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Voltage-Controlled Sensitivity of the Spin Seebeck Effect in Pt/Y 3 Fe 5 O 12 /MgO/(PbMg 1/3 Nb 2/3 O 3 ) 0.7 (PbTiO 3 ) 0.3 Multiferroic Heterostructures

The characteristics of pure spin current from the longitudinal spin Seebeck effect are investigated at room temperature in Pt / Y 3 Fe 5 O 12 deposited on the ( Pb Mg 1 / 3 Nb 2 / 3 O 3 ) 0.7 ( Pb Ti O 3 ) 0.3 substrate, through which electrostrain can be controllably applied. The applied voltage enables the modification of magnetic anisotropy in the magnetic insulating Y 3 Fe 5 O 12 layer, and thus the sensitivity of the spin Seebeck effect at small magnetic fields, without suppressing the spin Seebeck effect and the inverse spin Hall effect. This is due to the robust intrinsic physical parameters in Pt / Y 3 Fe 5 O 12 . In conclusion, our results pave the way for the application of voltage-controlled pure spin-current devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Voltage-Induced Charge Redistribution in Cu(In,Ga)Se 2 Devices Studied With High-Speed Capacitance–Voltage Profiling

Devices made from Cu(In, Ga)Se 2 (CIGS) solar cell material have been evaluated with high-speed capacitance-voltage profiling after stepwise voltage changes. The changes primarily affect near-interface charge at deep acceptors within the CIGS absorber layer and generate temperature-dependent capacitance changes observed in deep-level transient spectroscopy measurements. SCAPS device modeling indicates that the deep acceptor concentration is up to the two orders of magnitude higher than the shallow doping level. High deep acceptor concentrations are found in all materials studied here. In conclusion, the large deep defect levels are high enough to limit minority carrier lifetime and cell efficiency.

14 SOLAR ENERGY↗

Interarea Oscillation Damping Control Using High-Voltage DC Transmission: A Survey

High-voltage, direct current (HVDC) transmission lines are increasingly being installed in power systems around the world, and this trend is expected to continue with advancements in power electronics technology. These advancements are also bringing multi-terminal direct current (MTDC) systems closer to practical application. In addition, the continued deployment of phasor measurement units (PMUs) makes dynamic information about a large power system readily available for highly controllable components, such as HVDC lines. All these trends have increased the appeal of modulating HVDC lines and MTDC systems to provide grid services in addition to bulk power transfers. This paper provides a literature survey of HVDC and MTDC damping controllers for interarea oscillations in large interconnected power systems. The literature shows a progression from theoretical research to practical applications. There are already practical implementations of HVDC modulation for lines in point-to-point configuration, although the modulation of MTDC systems is still in the research stage. As a conclusion, this paper identifies and summarizes open questions that remain to be tackled by researchers and engineers.

Elizondo, Marcelo A. (ORCID:000000026621252X)↗

Multi-Scale Thermal Analysis for Design of SiC-Based Medium Voltage Motor Drive: Preprint

This paper describes a multi-scale thermal analysis approach for the design of an air-cooled 1.7-kV SiC MOSFET-based medium-voltage variable-speed motor drive. The National Renewable Energy Laboratory supported the project objectives by providing thermal management design support to the project partner The Ohio State University (OSU). The scope of the models and limited resources required efficient and flexible thermal models to be developed. Two modeling techniques are described that significantly reduced model run time and enabled more complex models to be run faster while retaining needed accuracy. The first technique uses the effectiveness-NTU method to extract convection boundary conditions from a computational fluid dynamics (CFD) model that can be applied to a fast-running finite element analysis model. The second is a porous media technique that enables system-level CFD simulations that incorporate effects from heat exchangers (e.g., pin fin heat sinks) that run in a fraction of the time required for fully resolved CFD simulations. The multi-scale approach to the thermal analysis enabled fast and accurate simulation for the converter design ranging from the die level up to the full system with 36 submodules. The modeling results were validated against experimental data from system tests performed by OSU.

DIRECT ENERGY CONVERSION↗

Survey and Benchmark of Benefits of High Voltage SiC Applications in Medium Voltage Power Distribution Grids

The main objective of this survey and benchmark study is to identify and document potential high-impact applications in today's and future medium voltage (MV) distribution grids that will significantly benefit from high voltage (HV) (i.e. > 3.3 kV) SiC-based power electronics equipment. In particular, it is desirable to identify applications that can utilize the high switching speed and high control bandwidth enabled by SiC-based equipment. Specifically, the benefits of using SiC are quantified through the benchmark analysis and design using simulation for the selected high-impact applications. In addition, to provide grid support services, it is necessary to consider grid requirements in the grid-connected converter's design. Therefore, the impact of grid requirements on the HV SiC-based grid-connected converter is evaluated.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Benefits of high-voltage SiC-based power electronics in medium-voltage power-distribution grids

Medium-voltage (MV) power electronics equipment has been increasingly applied in distribution grids, and high-voltage (HV) silicon carbide (SiC) power semiconductors have attracted considerable attention in recent years. This paper first overviews the development and status of HV SiC power semiconductors. Then, MV power-converter applications in distribution grids are summarized and the benefits of HV SiC in these applications are presented. Microgrids, including conventional and asynchronous microgrids, that can fully demonstrate the benefits of HV SiC power semiconductors are selected to investigate the benefits of HV SiC in detail, including converter-level benefits and system-level benefits. Finally, an asynchronous microgrid power-conditioning system (PCS) prototype using a 10 kV SiC MOSFET is presented.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Line Faults Classification Using Machine Learning on Three Phase Voltages Extracted from Large Dataset of PMU Measurements

An end-to-end supervised learning method is developed to classify transmission line faults in a twoyear field-recorded dataset that includes synchronized measurements of three-phase voltages recorded by 38 Phasor Measurement Units (PMU) sparsely located in in the US Western Grid interconnection. Statistical analysis is performed to extract features from this large dataset to train Support Vector Machine (SVM), Random Forest (RF), and eXtreme Gradient Boosting (XGBoost) classifiers initially. The training further leverages a simulated dataset from a synthetic grid with 12 PMUs to increase the number of faults of types infrequently seen in the field-recorded dataset. Training the classification models with the combined dataset resulted in a classification accuracy of 97.7%. This is a significant improvement over 89.7% to 92.5% accuracy obtained by relying on the field-recorded dataset alone.

47 OTHER INSTRUMENTATION↗