Search NASA⌕ Search

SEARCH · Search NASA

Results for “data reliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Image processing workflow yielding high contrast synchrotron nanoscale computed tomography data from Ni-YSZ electrodes

The operating lifetime of Ni-YSZ fuel electrodes used in solid oxide electrolysis cells and fuel cells (SOECs and SOFCs) is limited by Ni redistribution, one of the primary degradation mechanisms that must be overcome to extend the longevity and maximize the performance of SOECs and SOFCs. To achieve this, 3D microstructural data is needed to relate both initial performance and performance loss over time to microstructural properties and their evolution throughout operation under various conditions. However, 3D microstructure data remains relatively scarce within the literature due to multiple challenges in acquiring and analyzing such data reliably. This work presents a workflow for acquiring and processing synchrotron X-ray nanoscale computed tomography (nano-CT) data from Ni-YSZ electrodes. Parameters for each step in the nano-CT workflow are described up to the final result (a 3D reconstruction), with particular emphasis on image alignment using freely available software. Following the results of a parametric sweep of the image alignment step, high contrast, low signal-to-noise 3D nano-CT data is obtained with relatively short compute times. While the exact methods best suited to samples with different microstructural qualities, or similar Ni-YSZ nano-CT data obtained from other sources may deviate from the solution found herein, this work also generalizes the decision points and evaluation of each step to provide a starting point to adapt this workflow to other datasets.

08 HYDROGEN↗
NASA NTRS2003

Demonstrating a Realistic IP Mission Prototype

Flight software and hardware and realistic space communications environments were elements of recent demonstrations of the Internet Protocol (IP) mission concept in the lab. The Operating Missions as Nodes on the Internet (OMNI) Project and the Flight Software Branch at NASA/GSFC collaborated to build the prototype of a representative space mission that employed unmodified off-the-shelf Internet protocols and technologies for end-to-end communications between the spacecraft/instruments and the ground system/users. The realistic elements used in the prototype included an RF communications link simulator and components of the TRIANA mission flight software and ground support system. A web-enabled camera connected to the spacecraft computer via an Ethernet LAN represented an on-board instrument creating image data. In addition to the protocols at the link layer (HDLC), transport layer (UDP, TCP), and network (IP) layer, a reliable file delivery protocol (MDP) at the application layer enabled reliable data delivery both to and from the spacecraft. The standard Network Time Protocol (NTP) performed on-board clock synchronization with a ground time standard. The demonstrations of the prototype mission illustrated some of the advantages of using Internet standards and technologies for space missions, but also helped identify issues that must be addressed. These issues include applicability to embedded real-time systems on flight-qualified hardware, range of applicability of TCP, and liability for and maintenance of commercial off-the-shelf (COTS) products. The NASA Earth Science Technology Office (ESTO) funded the collaboration to build and demonstrate the prototype IP mission.

Rash, James↗
DOE OSTI2024

On the prediction of pressure effects for the combination kinetics of two alkyl radicals with the geometric mean rule

Here, alkyl combination reactions, along with their reverse alkane unimolecular decomposition reactions, are widely present in pyrolysis and combustion systems. These reactions occur mainly at temperatures at which their rate coefficients depend on pressure, and only a few studies have explored this dependence for large size alkyls. The accurate calculation of these kinetic data is limited by the size of the alkyl fragments involved, since the theoretical methods used are computationally expensive. Therefore, little reliable data is available for the modeling of real fuels alkane decomposition kinetics. In this paper, we propose an alternative approach that allows an accurate estimation of pressure-dependent kinetic rates for the combination of long-chain alkyl radicals, based on tabulated reaction models. The rates of combination of linear alkyls radicals forming ethane to pentane were calculated using the CASPT2-F12/cc-pVDZ-F12 level within VRC-TST theory combined with master-equation simulations. The computed high-pressure limit rate coefficients showed that n-propyl could be a minimum-size representative structure for larger n-alkyl chain, but this approach fails to capture the pressure dependence of the reaction that remains size-dependent for larger alkyls. The Geometric Mean Rule (GMR), a simple rule that links the self and cross-reactions of three alkyl radicals, is used to address this issue. Our theoretical calculations show for the first time that the GMR applies not only at the high-pressure limit, but also for every pressure explored. The GMR is shown to be accurate, with a maximum 22 % deviation in the falloff region for the estimation of rates for small alkyl combinations. Using this method, we propose a tabulated reaction rate rule for the combination of alkyl radicals up to C5+C5. The use of computed rate coefficients with the GMR approximation opens ways to develop pressure-dependent reaction rate rules for large n-alkyl combinations, based on accurate and computationally expensive theoretical calculations on smaller alkyl fragments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1988

Computerized monitoring and control of experiments in space

The computer subsystem of the Villanova University GAS (Get Away Special) experiment apparatus is discussed. The function of the computer subsystem is to provide data acquisition and control system support to the experiments. The computer subsystem will provide high availability, low power consumption and highly reliable data retention. The general layout of the subsystem provides for redundant processing units, control modules, and multiple data acquisition modules. Each of the two redundant processing units will be composed of a microprocessor, control logic, PROM, RAM, non-volitile memory, timers, self-check logic and data ports to the data acquisition and control modules. One unit will control the experiment while the other shadows the primary unit operation. The data acquisition module gathers data from the experiment. The data is transfered to the processing unit in digital form. The control module validates the data, decodes it and executes the command.

Janisch, Thomas V.↗
NASA NTRS2003

Disaster Response and Preparedness Application: Emergency Environmental Response Tool (EERT)

In 2000, the National Aeronautics and Space Administration (NASA) Environmental Office at the John C. Stennis Space Center (SSC) developed an Environmental Geographic Information Systems (EGIS) database. NASA had previously developed a GIS database at SSC to assist in the NASA Environmental Office's management of the Center. This GIS became the basis for the NASA-wide EGIS project, which was proposed after the applicability of the SSC database was demonstrated. Since its completion, the SSC EGIS has aided the Environmental Office with noise pollution modeling, land cover assessment, wetlands delineation, environmental hazards mapping, and critical habitat delineation for protected species. At SSC, facility management and safety officers are responsible for ensuring the physical security of the facilities, staff, and equipment as well as for responding to environmental emergencies, such as accidental releases of hazardous materials. All phases of emergency management (planning, mitigation, preparedness, and response) depend on data reliability and system interoperability from a variety of sources to determine the size and scope of the emergency operation. Because geospatial data are now available for all NASA facilities, it was suggested that this data could be incorporated into a computerized management information program to assist facility managers. The idea was that the information system could improve both the effectiveness and the efficiency of managing and controlling actions associated with disaster, homeland security, and other activities. It was decided to use SSC as a pilot site to demonstrate the efficacy of having a baseline, computerized management information system that ultimately was referred to as the Emergency Environmental Response Tool (EERT).

Smoot, James↗
NASA NTRS2008

Prioritized LT Codes

It is common in data transmissions that some information is more important than others. This is especially true in space communications where mission critical information or science data are high priority. In this work, we propose a simple yet constructive scheme to send high priority data reliably and efficiently using Luby Transform (LT) codes. The new proposed scheme modifies the conventional LT encoder to send high priority data as a degree 1 and 2 so that high priority data can be quickly resolved and very likely recovered before a decoder stops. Preliminary results show that a carefully designed degree distribution of high priority data increases the likelihood of receiving high priority information while having negligible performance impact on data with lower priority. The performance of the proposed scheme is evaluated and compared with the conventional LT approach with the same parameters under a range of erasure error rates.

priority coding↗
DOE OSTI2025

Emulators for Scarce and Noisy Data: Application to Auxiliary-Field Diffusion Monte Carlo for Neutron Matter

Understanding the equation of state (EOS) of pure neutron matter is necessary for interpreting multimessenger observations of neutron stars. Reliable data analyses of these observations require well-quantified uncertainties for the EOS input, ideally propagating uncertainties from nuclear interactions directly to the EOS. This, however, requires calculations of the EOS for a prohibitively larger number of nuclear Hamiltonians, solving the nuclear many-body problem for each one. Quantum Monte Carlo methods, such as auxiliary-field diffusion Monte Carlo (AFDMC), provide precise and accurate results for the neutron matter EOS, but they are very computationally expensive, making them unsuitable for the fast evaluations necessary for uncertainty propagation. Here, we employ parametric matrix models to develop fast emulators for AFDMC calculations of neutron matter and use them to directly propagate uncertainties of coupling constants in the Hamiltonian to the EOS. As these uncertainties include estimates of the effective field theory truncation uncertainty, this approach provides robust uncertainty estimates for use in astrophysical data analyses. In conclusion, this Letter will enable novel applications such as using astrophysical observations to put constraints on coupling constants for nuclear interactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Enhanced Component Performance Study: Emergency Diesel Generators 1998–2022

This report presents an enhanced performance evaluation of the emergency power system (EPS) and high-pressure core spray (HPCS) emergency diesel generators (EDGs) at U.S. commercial nuclear power plants. This report evaluates component performance over time using (1) Institute of Nuclear Power Operations (INPO) Industry Reporting and Information System (IRIS) data from 1998 through 2022 and (2) maintenance unavailability performance data from Mitigating Systems Performance Index (MSPI) Basis Document data from 2002 through 2022. The objective is to show estimates of current failure probabilities and rates related to EDGs, trend these data on an annual basis, determine if the current data are consistent with the probability distributions currently recommended for use in Nuclear Regulatory Commission (NRC) probabilistic risk assessments, show how the reliability data differ for different EDG manufacturers and for EDGs with different ratings; and summarize the subcomponents, causes, detection methods, and recovery associated with each EDG failure mode. The EDG failure modes considered are fail to start (FTS), fail to load and run (FTLR), and fail to run after one hour of operation (FTR>1H). Engineering analyses were performed with respect to time-period and failure mode without regard to the actual number of EDGs at each plant. The factors analyzed include subcomponent, failure cause, detection method, recovery, manufacturer, and EDG rating. The following increasing trends were identified for EDGs for the most recent 10-year period: (1) HPCS EDG FTS failure probability, (2) EPS and HPCS EDG frequency of start demands (demands per reactor year), and (3) EPS and HPCS EDG frequency of FTLR demands. The following decreasing trends were identified for EDGs for the most recent 10-year period: (1) EPS EDG FTS failure probability, (2) EPS EDG FTLR failure probability, (3) EPS EDG unavailability, and (4) EPS and HPCS EDG frequency of FTLR events (failures per reactor year).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Enhanced Component Performance Study: Emergency Diesel Generators 1998-2024

This report presents an enhanced performance evaluation of the emergency power system (EPS) and high-pressure core spray (HPCS) emergency diesel generators (EDGs) at U.S. commercial nuclear power plants. This report evaluates component performance over time using (1) Institute of Nuclear Power Operations (INPO) Industry Reporting and Information System (IRIS) data from 1998 through 2024 and (2) maintenance unavailability performance data from Mitigating Systems Performance Index (MSPI) Basis Document data from 2002 through 2024. The objective is to show estimates of current failure probabilities and rates related to EDGs, trend these data on an annual basis, determine if the current data are consistent with the probability distributions currently recommended for use in Nuclear Regulatory Commission (NRC) probabilistic risk assessments, show how the reliability data differ for different EDG manufacturers and for EDGs with different ratings; and summarize the subcomponents, causes, detection methods, and recovery associated with each EDG failure mode. The EDG failure modes considered are fail to start (FTS), fail to load and run (FTLR), and fail to run after one hour of operation (FTR>1H). Engineering analyses were performed with respect to time-period and failure mode without regard to the actual number of EDGs at each plant. The factors analyzed include subcomponent, failure cause, detection method, recovery, manufacturer, and EDG rating. The following increasing trends were identified for EDGs for the most recent 10-year period: • EPS and HPCS EDG frequency of start demands (demands per reactor year) • EPS and HPCS EDG frequency of FTLR demands • EPS and HPCS EDG frequency of run>1H hours. The following decreasing trends were identified for EDGs for the most recent 10-year period: • EPS EDG FTR>1H failure rate • EPS EDG unreliability • EPS and HPCS EDG frequency of FTR>1H events (failures per reactor year).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1989

Tank Pressure Control Experiment on the Space Shuttle

The tank pressure control experiment is a demonstration of NASA intent to develop new technology for low-gravity management of the cryogenic fluids that will be required for future space systems. The experiment will use freon as the test fluid to measure the effects of jet-induced fluid mixing on storage tank pressure and will produce data on low-gravity mixing processes critical to the design of on-orbit cryogenic storage and resupply systems. Basic data on fluid motion and thermodynamics in low gravity is limited, but such data is critical to the development of space transfer vehicles and spacecraft resupply facilities. An in-space experiment is needed to obtain reliable data on fluid mixing and pressure control because none of the available microgravity test facilities provide a low enough gravity level for a sufficient duration to duplicate in-space flow patterns and thermal processes. Normal gravity tests do not represent the fluid behavior properly; drop-tower tests are limited in length of time available; aircraft low-gravity tests cannot provide the steady near-zero gravity level and long duration needed to study the subtle processes expected in space.

Source record↗
NASA NTRS2010

Working with Consortia - Advanced Packaging Reliability

Description: Support the responsible NASA official for lead-free solder evaluation. Serve as the NASA technical liaison to the NASA/DoD Pb-free Project. Assure NASA areas of interest are included in JG-PP follow-on work. Support NASA/DoD telcons and face-to-face meetings. Update MSFC lead-free solder lessons learned report. FY10 plans: - Reliability data on lead-free solder applications for various part lead finishes and board finishes. - Update lead-free solder risks and risk mitigation strategies for NASA. - Evaluate lead-free alloy/lead-free finish reliability in design application. - Status CAVE project on Pb-free solder aging effects. - Compile the LTESE flight and bench data.

Blanche, Jim↗
NASA NTRS2019

ISS Science Payload Command & Data Handling

For decades, the International Space Station (ISS) has provided a distinctive platform in low Earth orbit for experimental research. In support of this platform is a family of avionics systems that enables reliable data distribution of the many science payloads installed, and future internal and external payloads. This poster provides an update to the ISS avionics hardware system architecture, including design change successes, test bed architecture, and performance upgrades in the operation of all ISS avionics. We conclude with an outlook on future avionics system enhancements required to support additional modules and payload expansions taking place on the ISS, and how these avionics systems translate to a lunar gateway.

1553↗
DOE OSTI2022

Training data selection for event classification in a highly variable environment

A problem of interest for nuclear nonproliferation is monitoring activities at nuclear facilities, where proliferation events may only take place a few times and often under variable conditions. Machine learning has revolutionized data analytics by enabling the use of measurable signatures to generate predictive models of facility operations. However, traditional methods for training these models require large, reliable data sets with labeled observations, a challenge for nonproliferation. Highly variable conditions further complicate this as events from training data may have occurred in conditions quite different from the event of interest. Our hypothesis is that when events occur in a highly variable environment, careful training data selection for each test event could outperform the standard approach of using all available training data. We developed a method to optimize training data selection for the given test event and applied it to predicting the power level of the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory. In this study, the reactor startup exhibits variability between occurrences due to natural variability in environmental conditions and operational procedures. Using a combination of analysis techniques, a similitude assessment was performed on data collected from HFIR to isolate clusters that were optimal for training a predictive model. Concepts such as dynamic time warping and Jaccard similarity were used in conjunction with clustering analysis. In order to validate this approach, the model was trained on every combination of unique training events and the predictive performance was compared to the performance using a subset of the training data selected by isolated clusters found through the similitude assessment.

Iyer, A↗
NASA NTRS2021

Crop-CASMA - A Web GIS Tool for Cropland Soil Moisture Monitoring and Assessment Based on SMAP Data

Timely, frequent, and complete cropland soil moisture information acquired throughout the growing season is critical for agricultural policy, production, food security, and food prices. The NASA Soil Moisture Active and Passive (SMAP) mission provides a reliable data source for cropland soil moisture assessment. This paper presents Crop-CASMA- a web GIS application tool for cropland soil moisture monitoring and assessment based on SMAP data. This interactive Web service-based GIS application tool enables CONUS SMAP derived soil moisture data visualization, dissemination, and analytics. In this paper, we describe the Crop-CASMA application system architecture, the application implementation, and the data it serves. In addition, we also present a few snapshots of the Crop-CASMA data for cropland soil moisture monitoring. The release of Crop-CASMA greatly enhances the user experience and facilitates using soil moisture data products for crop condition monitoring and decision support.

Zhengwei Yang↗
NASA NTRS2021

Crop-CASMA - A Web GIS Tool for Cropland soil moisture Monitoring and Assessment Based on SMAP Data

Timely, frequent, and complete cropland soil moisture information acquired throughout the growing season is critical for agricultural policy, production, food security, and food prices. The NASA Soil Moisture Active and Passive (SMAP) mission provides a reliable data source for cropland soil moisture assessment. This paper presents Crop-CASMA - a web GIS application tool for cropland soil moisture monitoring and assessment based on SMAP data. This interactive Web service-based GIS application tool enables CONUS SMAP derived soil moisture data visualization, dissemination, and analytics. In this paper, we describe the Crop-CASMA application system architecture, the application implementation, and the data it serves. In addition, we also present a few snapshots of the Crop-CASMA data for cropland soil moisture monitoring. The release of Crop-CASMA greatly enhances the user experience and facilitates using soil moisture data products for crop condition monitoring and decision support.

Reichle, Rolf H.↗
DOE OSTI2022

Enhanced Component Performance Study: Air-Operated Valves 1998–2020

This report presents an enhanced performance evaluation of air-operated valves (AOVs) at U.S. commercial nuclear power plants. The data used in this study are based on the operating experience failure reports from calendar year 1998 through 2020 as reported in the Institute of Nuclear Power Operations (INPO) Industry Reporting and Information System (IRIS). The AOV failure modes considered are failure-to-open/close (FTOC), failure to operate or control (FTOP), and spurious operation (SO). The component reliability estimates and the reliability data are trended for the most recent 10-year period while yearly estimates for reliability are provided for the entire study period. The following trends were identified for the most recent 10-year period: o Extremely statistically significant increasing trend for the frequency of FTOC demands (demands per reactor year) for low-demand (= 20 demands per year) AOVs o Extremely statistically significant increasing trend for the frequency of FTOC demands for high-demand (> 20 demands per year) AOVs o Highly statistically significant decreasing trend for the failure rate of FTOP for low-demand AOVs o Highly statistically significant decreasing trend for the frequency of FTOP events (failures per reactor year) for low-demand AOVs o Statistically significant decreasing trend for the failure rate of SO for low-demand AOVs o Statistically significant decreasing trend for the frequency of SO events (failures per reactor year) for low-demand AOVs.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Enhanced Component Performance Study: Motor-Operated Valves 1998-2020

This report presents an enhanced performance evaluation of motor-operated valves (MOVs) at U.S. commercial nuclear power plants. The data used in this study are based on the operating experience failure reports from calendar year 1998 through 2020 as reported in the Institute of Nuclear Power Operations (INPO) Industry Reporting and Information System (IRIS). The MOV failure modes considered are fail to open or close (FTOC), fail to operate or control (FTOP), and spurious operation (SO). The component reliability estimates and the reliability data are trended for the most recent 10-year period while yearly estimates for reliability are provided for the entire study period. The following increasing trend was identified for MOVs for the most recent 10-year period: • Low-demand MOV frequency of FTOC demands (demands per reactor year). The following increasing trends were identified for MOVs for the most recent 10-year period: • Low-demand MOV FTOC failure probability • Low-demand MOV frequency of FTOC events (failures per reactor year).

99 GENERAL AND MISCELLANEOUS↗