Search NASA⌕ Search

SEARCH · Search NASA

Results for “graphite microstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Interaction of graphite and ablative materials with CO2-laser, carbon-arc, and xenon-arc radiation

The behavior of graphite and several charring ablators in a variety of high radiative heat flux environments was studied in various radiative environments produced by a CO2 laser and a carbon arc facility. Graphite was also tested in xenon arc radiation. Tests were conducted in air nitrogen, helium, and a mixture of CO2 and nitrogen, simulating the Venus atmosphere. The experimental results are compared with theoretical results obtained with a one dimensional charring ablator analysis and a two dimensional subliming ablator analysis. Photomicroscopy showed no significant differences in appearance or microstructure of the charring ablators or graphite after testing in the three different facilities, indicating that the materials respond fundamentally the same to the radiation of different frequencies. The performance of phenolic nylon and graphite was satisfactorily predicted with existing analyses and published material property data.

Brewer, W. D.↗

Features of Pulsed Laser Annealing of BC{sub 3} Films on a Sapphire Substrate

The morphology, chemical composition, microstructure, and electrical properties of BC{sub 3} thin films subjected to melting by a nanosecond laser pulse are investigated. The original films have been created by pulsed laser codeposition of B and C onto a sapphire substrate at 150 and 350°C. Morphological changes in the films depended on their initial structural state. However, a “frozen” structure of both films after irradiation corresponded to the B-saturated graphite-like phase, the local composition of which varied due to the formation of inclusions of amorphous boron carbide. Before and after irradiation, the films exhibited a slightly decreasing dependence of the surface resistance with increasing temperature from 4.2 to 330 K. After laser irradiation, the films resistance has decreased by a factor of ~2.6.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding the reaction of nuclear graphite with molecular oxygen: Kinetics, transport, and structural evolution

A thorough understanding of oxidation is important when considering the health and integrity of graphite components in graphite reactors. For the next generation of graphite reactors, HTGRs specifically, an unlikely air ingress has been deemed significant enough to have made its way into the licensing applications of many international licensing bodies. While a substantial body of literature exists on nuclear graphite oxidation in the presence of molecular oxygen and significant efforts have been made to characterize oxidation kinetics of various grades, the value of existing information is somewhat limited. Often, multiple competing processes, including reaction kinetics, mass transfer, and microstructural evolution, are lumped together into a single rate expression that limits the ability to translate this information to different conditions. This article reviews the reaction of graphite with molecular oxygen in terms of the reaction kinetics, gas transport, and microstructural evolution of graphite. It also presents the foundations of a model for the graphite-molecular oxygen reaction system that is kinetically independent of graphite grade, and is capable of describing both the bulk and local oxidation rates under a wide range of conditions applicable to air-ingress.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermal oxidation of nuclear graphite and pyrolytic carbon coatings

The oxidation of pyrolytic carbon (PyC) deposited via fluidized bed chemical vapor deposition was characterized and compared with that of standard nuclear-grade graphite. The materials were heated at 700 to 1000 °C in a thermogravimetric analysis system under 20% v/v O 2 flow, allowing for direct comparison of dynamic oxidative mass change in each material. Further, three different PyC samples fabricated under different conditions exhibited variation in total mass loss and mass loss rate, varying by as much as 709 mg/cm 2 in total mass loss and 14.2 (mg/cm 2 )/min in mass loss rate at a single temperature. These variations highlight the correlation between PyC microstructure/defect density and oxidation susceptibility. Additionally, changes in the microstructure and composition between PyC and graphite were characterized via scanning electron microscopy and correlated to the mass loss results. The results of this work have implications toward the safety of tristructural isotropic (TRISO) and other coated particle fuels, especially under off-normal conditions, given the limited information that exists about the oxidation behavior of PyC.

36 MATERIALS SCIENCE↗

Solid-state reaction mediated microstructural evolution in a spark plasma sintered in situ Ti–B 4 C composite

For this study, a novel porosity-free in situ Ti–B 4 C composite was fabricated via spark plasma sintering (SPS). Detailed analysis of the phase evolution, coupling results from XRM, XRD and SEM-EBSD-EDS, indicate that primarily TiB 2 precipitates formed due to the in-situ reactions between the boron-carbide and titanium powders. The precipitation of TiB 2 resulted in the formation of a graphitic C-rich thin layer circumscribing the partially reacted B 4 C particles. Further progression of the in-situ reaction leads to the out-diffusion of the excess carbon from the B 4 C particles, across the graphite and TiB 2 phases, forming TiC upon reacting with the titanium matrix. Therefore, the final microstructure primarily consisted of TiB 2 , TiC, and partially reacted B 4 C phases, with small amounts of TiB, α-Ti, and graphite. Furthermore, the microstructure in these SPS processed in situ composites appeared to be the product of a solid-state Ti–B 4 C diffusion couple, substantially different from their fusion-based additively manufactured counterparts. Nano-indentation tests revealed a remarkably high average hardness of ~25 GPa for this SPS-processed Ti–B 4 C composite and comparable (with literature) phase-specific hardness and modulus values for the constituent TiB 2 , TiC, and B 4 C phases.

36 MATERIALS SCIENCE↗

Radiation damage study of POCO ZXF-5Q graphite for neutrino production targets using 4.5 MeV helium ions

To address the challenges of increased beam power and target survivability associated with next-generation particle production beam lines, high dose, high-energy proton beam conditions are simulated using irradiation from low-energy ion beams. A low-energy ion irradiation study of POCO ZXF-5Q graphite under conditions similar to those of the NuMI NT-02 neutrino production target at the Fermi National Accelerator Laboratory is reported. Helium ion irradiation was performed at 100 ∘ C to a maximum damage level of 0.9 displacements per atom (DPA). Irradiation induced hardening, swelling of the irradiated region, inter-plane lattice expansion, and intraplane lattice contraction with increasing ion fluence was observed using micromechanical (nanoindentation, atomic force microscopy) and electron microscopy (high-resolution imaging, selected area diffraction) characterization. Similar changes were also observed in post irradiation examination of the NT-02 target indicating that ion irradiation can be a valuable tool for estimating radiation damage in proton beam targets. Caution must be exercised though, because the hardening, lattice alteration, and swelling occur to different magnitudes for a given damage level. The observed hardening and embrittlement were greater for ion irradiated graphite. For He ion irradiated samples the lattice spacing changes were smaller at low damage levels (78% less expansion and 71% less contraction at 0.1 DPA) and larger at high damage levels (38% more expansion and 5% more contraction at 0.9 DPA) relative to that observed in the NT-02 target. The magnitude of swelling was 8.5× greater under ion irradiation which is influenced by the differing damage gradients and inclusion of implanted He ions in the region of interest.

43 PARTICLE ACCELERATORS↗

Graphite oxide-mediated synthesis of porous CeO{sub 2} quadrangular prisms and their high-efficiency adsorptive performance

Graphical abstract: - Highlights: • Porous CeO{sub 2} quadrangular prisms have been prepared via graphite oxide-mediated synthesis. • Dual-pore hierarchical systems are formed with the pore distributions around 4 nm and 30 nm. • Porous CeO{sub 2} exhibits a rapid adsorption to Rhodamine B with a removal efficiency of ∼99%. • Porous CeO{sub 2} retains the same performances in different pH solutions. - Abstract: We report a graphite oxide-mediated approach for synthesizing porous CeO{sub 2} through a facile hydrothermal process followed by thermal annealing in air. The phase structure, morphology, microstructure and porosity of the products have been revealed by a combination of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and N{sub 2} adsorption. The as-prepared CeO{sub 2} products show well-defined quadrangular prism morphology, and they are composed of interconnected nanoparticles with diameters around 30–100 nm. In particular, the dual-pore hierarchical systems are created in the CeO{sub 2} quadrangular prisms with the pore distributions around 4 nm and 30 nm. The dye sorption capacity of the porous CeO{sub 2} is investigated, which exhibits a rapid adsorption to rhodamine B with a high removal efficiency of ∼99%. Moreover, the CeO{sub 2} absorbent retains the same performances in different pH solutions.

36 MATERIALS SCIENCE↗

The Mechanical Properties of Energetically Deposited Non-Crystalline Carbon Thin Films

The mechanical behaviour of carbon films prepared with a variety of densities and microstructures was investigated using nanoindentation. Deposition energies between 25 and 600 eV and temperatures in the range 25-600 °C were used. Films prepared at low temperatures and moderate energy were amorphous with a high density. Finite element methods were used to model the stress fields, reproduce the indentation behaviour and evaluate elastic properties. Young s moduli up to 670 GPa and a low Poisson s ratio of ~ 0.17 were found, comparable to polycrystalline cubic boron nitride, one of the hardest materials known. Films with the same density did not always show the same behaviour, emphasising the role of microstructure in determining mechanical response. Extended graphite- like regions within the films grown at high energy and high temperature observed in transmission electron microscopy caused plastic deformation and failure to recover after a complete indentation cycle. At low deposition energies, the graphite-like regions were smaller in size causing plastic deformation but with complete recovery after indentation.

36 MATERIALS SCIENCE↗

Low-temperature synthesis of AlN powder with multicomponent additive systems by carbothermal reduction-nitridation method

AlN powders were synthesized at low temperatures (1300 and 1400 {sup o}C) by the carbothermal reduction-nitridation (CRN) method using multicomponent additive systems. The synthesis treatments were conducted in a graphite furnace with flowing nitrogen gas between 1200 and 1500 {sup o}C using powder mixtures with Al{sub 2}O{sub 3}:C molar ratio of 1:3 and 0.5-3 wt% of CaF{sub 2}, Y{sub 2}O{sub 3}, Li{sub 2}CO{sub 3} and/or SrCO{sub 3} as additives. In relation to the conventional CRN process, the use of multicomponent additive systems reduced the synthesis temperature in 200 {sup o}C (CaF{sub 2}-SrCO{sub 3}), 100 {sup o}C (CaF{sub 2}-Li{sub 2}CO{sub 3} and CaF{sub 2}-Y{sub 2}O{sub 3}-Li{sub 2}CO{sub 3}) or <100 {sup o}C (CaF{sub 2}-Y{sub 2}O{sub 3} and CaF{sub 2}-Y{sub 2}O{sub 3}-Li{sub 2}CO{sub 3}-SrCO{sub 3}). X-ray diffraction patterns showed that the additives reacted with the alumina powder forming aluminate phases, which vaporized with the increase of synthesis temperature. The enhanced AlN conversion rate was discussed in terms of the vaporization of aluminates in the reducing atmosphere.

36 MATERIALS SCIENCE↗

Honeycomb-like graphitic ordered macroporous carbon prepared by pyrolysis of ammonium bicarbonate

Graphical abstract: Honeycomb-like graphitic macroporous carbon (HGMC) with big pores centered at 1-3 {mu}m, has been prepared by controlling the reaction temperature and amount of NH{sub 4}HCO{sub 3} at 550 {sup o}C in a sealed reaction system. Possible formation processes of HGMC are discussed on the experimental results. It is believed that the in situ formed MgO microparticles play a template role during the preparation of HGMC. Highlights: {yields} Honeycomb-like graphitic carbon was synthesized at 550 {sup o}C. {yields} The honeycomb-like graphitic carbon is macroposous structures. {yields} The formed MgO microparticles play a template role during the HGMC formation. {yields} The method can be expended to synthesize other porous or hollow carbon material. -- Abstract: Honeycomb-like graphitic macroporous carbon (HGMC) was synthesized by means of pyrolysis of NH{sub 4}HCO{sub 3} using Mg powder as reductant in an autoclave at 550 {sup o}C. The characterization of structure and morphology was carried out by X-ray diffraction (XRD), Raman spectrum, field-emission scanning electron microscopy (FESEM), and (High-resolution) transmission electron microscope [(HR)TEM]. The results of nitrogen adsorption-desorption indicate that the products are macropore materials with the pore size of 1-3 {mu}m, and the Brunauer-Emett-Teller (BET) surface area was 14 m{sup 2}/g. As a typical morphology, the possible growth process of HGMC was also investigated and discussed. The experimental results show that the in situ formed MgO microparticles play a template role during the HGMC formation.

36 MATERIALS SCIENCE↗

Variation of char structure during anthracite pyrolysis catalyzed by Fe{sub 2}O{sub 3} and its influence on char combustion reactivity

Effects of Fe{sub 2}O{sub 3} on the pyrolysis reactivity of demineralized anthracite were investigated by a thermo-gravimetric analyzer, indicating that pyrolysis reactivity of Fe{sub 2}O{sub 3}-loaded demineralized anthracite was higher than that of raw demineralized anthracite when temperature is over 500{sup o}C. Chars were prepared from the two coal samples in muffle with heating progress, and their structures were analyzed using SEM, FTIR, XRD, and Raman. FTIR results showed that absorption peaks of functional groups on the surface of char from catalytic pyrolysis at 700{sup o}C were more than that of char from noncatalytic pyrolysis. Raman results demonstrated values of (I{sub D3} + I{sub D4})/IG of chars from catalytic pyrolysis and noncatalytic pyrolysis were 4.76 and 3.86, respectively, indicating that ordering of the char was decreased by Fe{sub 2}O{sub 3}. XRD analysis revealed that diffraction angle of the 002 peak did not shift; however, L{sub a} and L{sub c} decreased, indicating degree of graphitization for microcrystalline structure of char from catalytic pyrolysis was decreased. The results of FTIR, XRD, and Raman of the char showed that catalytic pyrolysis improved the formation of free radicals, while hindered polymerization and forming of basic structure units. Finally, combustion reactivity of the three chars, including char of raw demineralized anthracite (char-A), char of Fe{sub 2}O{sub 3}-loaded demineralized anthracite (char-B), and char of Fe{sub 2}O{sub 3}-loaded demineralized anthracite washed by HCl (char-C), was investigated using TG and indicated that their active order was char-B > char-C > char-A. The results corroborated that Fe{sub 2}O{sub 3} changed structure of anthracite char and improved combustion reactivity.

01 COAL, LIGNITE, AND PEAT↗

Ytterbium Ion Collection on Graphite Plates

Surface characterization and analysis of the graphite collection and strike plates was conducted in this report. These plates were from an electromagnetic isotope separation collector that had been irradiated with an ytterbium ion beam. The results of this study are reported along with analysis and discussion of the potential growth mechanism of the ytterbium layer on graphite. It is proposed that directional deposition of ytterbium ions occurs first in the defect regions of the graphite plate. As deposition continues, it leads to the eventual formation of directional globs that elongate and grow into plates, then stacks, and finally into sheets of ytterbium. The ytterbium layer appears to have a definite phase boundary with the graphite layer. It was also determined that during irradiation with the ytterbium ion beam, the sputtered carbon becomes interpolated in the ytterbium surface layer on the graphite plate and has an amorphous microstructure.

36 MATERIALS SCIENCE↗

Modeling Graphite Behavior (Fracture and Oxidation)

Purpose of this work Oxidation modeling Oxidation of full-scale components Local properties in oxidized components Graphite fracture strength Phase field fracture modeling Microstructurally informed fracture model IG-110 tensile results and comparison to experiment Work in progress and future work

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Understanding the Reaction of Nuclear Graphite with Molecular Oxygen

A thorough understanding of oxidation is important when considering the health and integrity of graphite components in graphite reactors. For the next generation of graphite reactors, HTGRs specifically, an unlikely air ingress has been deemed significant enough to have made its way into the licensing applications of many international licensing bodies. While a substantial body of literature exists on nuclear graphite oxidation in the presence of molecular oxygen and significant efforts have been made to characterize oxidation kinetics of various grades, the value of existing information is somewhat limited. Often, multiple competing processes, including reaction kinetics, mass transfer, and microstructural evolution, are lumped together into a single rate expression that limits the ability to translate this information to different conditions. This article reviews the reaction of graphite with molecular oxygen in terms of the reaction kinetics, gas transport, and microstructural evolution of graphite. It also presents the foundations of a model for the graphite-molecular oxygen reaction system that is kinetically independent of graphite grade, and is capable of describing both the bulk and local oxidation rates under a wide range of conditions applicable to air-ingress.

J. Kane, Joshua↗

Graphite and ablative material response to CO2 laser, carbon-arc, and xenon-arc radiation

The behavior was investigated of graphite and several charring ablators in a variety of high-radiative heat-flux environments. A commercial-grade graphite and nine state-of-the-art charring ablators were subjected to various radiative environments produced by a CO2 laser and a carbon arc. Graphite was also tested in xenon-arc radiation. Heat-flux levels ranged from 10 to 47 MW/sq m. Tests were conducted in air, nitrogen, helium, and a CO2-N2 mixture which simulated the Venus atmosphere. The experimental results were compared with theoretical results obtained with a one-dimensional charring-ablator analysis and a two-dimensional subliming-ablator analysis. Neither the graphite nor the charring ablators showed significant differences in appearance or microstructure after testing in the different radiative environments. The performance of phenolic nylon and graphite was predicted satisfactorily with existing analyses and published material property data. Good agreement between experimental and analytical results was obtained by using sublimation parameters from a chemical nonequilibrium analysis of graphite sublimation. Some charring ablators performed reasonably well and could withstand radiative fluxes of the level encountered in certain planetary entries. Other materials showed excessive surface recession and/or large amounts of cracking and spalling, and appear to be unsuitable for severe radiative environments.

Brewer, W. D.↗

Toughening of Boron Carbide Composites by Hierarchical Microstructuring

Due to a unique combination of properties including high hardness, low density, chemical and thermal stability, semi-conductivity, and high neutron absorption, boron carbide (B4C) is a potential candidate for various applications involving extreme environment. However, B4C’s current application is limited because of its low fracture toughness. In this study, a hierarchical microstructure design with features including TiB2 grains and graphite platelets was used to toughen B4C by simultaneously utilizing multiple toughening mechanisms including crack deflection, bridging, and micro-crack toughening. Using field-assisted sintering technology (FAST), B4C composites with dense and hierarchical microstructure were fabricated. Previously, the fracture toughness of fabricated B4C composites was measured at micro-scale using micro-indentation to have up to 56% improvement. In this work, the B4C composites’ fracture toughness was characterized at macro-scale using four-point bending methods and compared with previous results obtained at micro-scale. Micromechanics modeling of fracture behaviors for B4C-TiB2 composites was also performed to evaluate the contributions from experimentally observed toughening mechanisms. From four-point bending tests, B4C composites reinforced with both TiB2 grains (~15 vol%) and graphite platelets (~8.7 vol%) exhibited the highest fracture toughness enhancement from 2.38 to 3.65 MPa∙m^(1/2). The measured values were lower than those obtained using micro-indentation but maintained the general trends. The discrepancy between the indentation and four-point bending test results originated from the complex deformation behaviors triggered by the high contact load during indentation tests. Through micromechanics modeling, introduced thermal residual stress due to thermal expansion mismatch between B4C and TiB2, and weak interphases at B4C-TiB2 boundaries were identified as the main causes for experimentally observed toughness enhancement. These results proved the effectiveness of hierarchical microstructure designs for B4C toughening and can provide reference for the future design of B4C composites with optimized microstructures for further fracture toughness enhancement.

composites↗

Growth Kinetics and Microstructure of PbTe Films Produced on Si and BaF{sub 2} Substrates by a Modified Hot-Wall Method

Lead telluride films have been grown on Si (100) and BaF{sub 2} (100) substrates by a modified hot-wall method using a graphite reaction chamber. According to X-ray diffraction, X-ray microanalysis, and scanning electron microscopy characterization results, the average growth rate of PbTe films having compositions within the homogeneity range of lead telluride increases with increasing lead vapor partial pressure and decreases with increasing tellurium vapor partial pressure, independent of the nature of the substrate. The rate of PbTe film growth has been shown to be maximal in the initial stage of the process and decrease monotonically over time, independent of the nature of the substrate. Independent of the growth time, the average growth rate of the PbTe films on the Si (100) substrates is considerably higher than that on the BaF{sub 2} (100) substrates. Reflection high-energy electron diffraction data indicate that the texture of the PbTe films on Si (100) corresponds to the substrate orientation and that the misorientation angle of the mosaic blocks does not exceed 20°. On the BaF{sub 2} (100) substrates, we observe epitaxial PbTe film growth with the orientation relationship (100), [011] PbTe ║ (100), [011] BaF{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗