Search NASA⌕ Search

SEARCH · Search NASA

Results for “leaves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Harnessing plant‐based platform for low‐cost cellulosic sugar recovery from bioenergy crops

The price of pure cellulase enzyme for the recovery of fermentable cellulosic sugars is one of the major challenges that limit the commercialization of second-generation biofuels and bio-based products. This work shows a means to greatly reduce the cost of cellulases. The abundant capacity of plants to synthesize and hyperaccumulate transgenic proteins in their plastids has been demonstrated for two gene constructs using either NPT II or Tet C to regulate the expression of bacterial cellulase Cel6A. Previously, the expression of Cel6A to 20–35% of total soluble leaf protein in tobacco was shown in two consecutive field trials. Moving forward, the key challenge was the extraction of active enzymes from the transgenic tobacco leaves hyperaccumulating bacterial cellulases in a cost-effective manner. The study showed that unpurified crude extracts of NPT II and Tet C transgenic tobacco leaves recovered ~23% and ~29% w/w cellulosic sugars from energycane bagasse, respectively. A supplementation of as low as 25% of purified commercial cellulase improved the glucose recovery by 2.9 times (~85% w/w) compared to 100% crude extract, which is comparable to the glucose recovery obtained by commercial cellulases, thereby suggesting a reduced requirement of commercial cellulases leading to a cost reduction of 75% for biorefineries. Assuming a stable 40% cellulase yield in total soluble protein under field conditions and multiple harvests (one to three) a year, the study estimates that the potential cost for saccharification of 1 t of lignocellulosic biomass can be reduced to 67–200 USD by using crude leaf extracts of transgenic tobacco.

biofuel↗
DOE OSTI2025

Overexpression of plasma membrane SUT1 in poplar alters lateral sucrose partitioning in stem and promotes leaf necrosis

Abstract In Populus and many other tree species, photoassimilate sucrose diffuses down a concentration gradient via symplastically connected mesophyll cells to minor vein phloem for long‐distance transport. There is no evidence for apoplastic phloem‐loading in Populus . However, plasma membrane sucrose transporters (SUT1 and SUT3) orthologous to those associated with apoplastic phloem loading are expressed in vascular tissues of poplar. While SUT3 functions in sucrose import into developing xylem, the role of SUT1 remains unclear. Here, we overexpressed PtaSUT1 in Populus tremula x P. alba to examine the effects on sucrose partitioning in transgenic plants. Overall leaf sucrose levels were similar between wild type and transgenic lines. Stem sucrose levels were not changed in bark but were significantly reduced in the adjacent xylem, suggesting hindered intercellular sucrose trafficking from the phloem to the developing xylem. Fully expanded leaves of transgenic plants deteriorated prematurely with declining photosynthesis prior to severe necrotic spotting. Necrotic spotting advanced most rapidly in the distal portion of mature leaves and was accompanied by sharp hexose increases and sharp sucrose decreases there. Leaf transcriptome profiling and network inference revealed the down‐regulation of copper proteins and elevated expression of copper microRNAs prior to noticeable leaf injury. Our results suggest ectopic expression of PtaSUT1 altered sucrose partitioning in stems with systemic effects on leaf health and copper homeostasis mediated in part by sucrose‐sensitive copper miRNAs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Multipoint Aerostructural Optimization of Wind Turbine Rotors Using a Coupled Blade‐Resolved Aerostructural Solver

Physics‐based design optimization workflows thread the needle between computational cost limitations and simulation complexity, often compromising between modeling detail and the range of operating design conditions. Multipoint aerostructural optimization of wind turbine rotors has so far been confined to low‐fidelity analyses or to high‐fidelity studies with simplified structural models, leaving the most complex design trade‐offs unexplored. We close this gap by performing the first tightly coupled gradient‐based multipoint aerostructural rotor optimization using 3D aerodynamic and structural solvers with discrete coupled adjoints. The optimizer simultaneously varies blade planform, airfoil shapes, and structural thickness through more than 270 design variables, minimizing a weighted combination of rotor mass and power across multiple wind speeds. Applied to a modified DTU 10‐MW benchmark under conservative structural and aerodynamic constraints, our multipoint optimization reduces rotor mass by up to 36% and increases power by 12%–15% across the main operating conditions; biasing the objective toward power yields power gains up to 18% and a 17% mass reduction. For a nominal wind distribution, 3‐point rotor designs accounting for low RPM and high thrust conditions capture dominant trade‐offs and outperform single‐point designs. Adding two off‐design points changes individual‐condition power by less than 3% but leaves the weighted average within 0.5%, and the mass‐power bias has a stronger effect on the final design than the operating‐point weighting itself. Our framework extends naturally to richer load cases and site‐specific wind distributions, providing a basis for high‐fidelity multipoint design earlier in industrial workflows.

17 WIND ENERGY↗
DOE OSTI2023

Sum frequency generation (SFG) microscopy analysis of cellulose microfibrils in Physcomitrium patens gametophore leaf

Physcomitrium patens is a good model system to study the structure and function relationships of cellulose synthase (CESA) proteins since the life cycle of moss is short and genetic modification is relatively easy. Here, we report a microscopic sum frequency generation (SFG) vibrational spectroscopy analysis of P. patens leaves in a never-dried and fully hydrated state. Using imaging-SFG spectroscopy, cellulose microfibril (CMF) organization in the midrib, laminar, and marginal regions of the gametophore leaf were analyzed separately. The azimuth angle dependence of SFG signals showed that CMFs in the thick stereid cell walls in the midrib are highly aligned along the microfibril angle of ~ 30° with respect to the midrib axis. CMFs in the marginal cell walls also are preferentially tilted toward the longitudinal axis of leaf with the characteristic features of secondary cell walls. On the other hand, CMFs in the lamina cell walls have no preferential orientation and their SFG intensity is low, which is consistent with the primary cell wall property. Finally, the thick walls and highly aligned CMFs in the midrib and marginal cells of P. patens leaves are consistent with their support function.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Metal concentration and leaf spatial distribution assessed by synchrotron µXRF in Brazilian nickel hyperaccumulators

Background and Aims: The limited number of known hyperaccumulator species in tropical regions, including Brazil, has hampered the development of nickel (Ni) agromining. In addition, the mechanisms underlying metal accumulation and distribution in these species remain poorly understood, despite their pivotal role in identifying species with economic potential. Furthermore, this study assessed the accumulation potential and foliar spatial distribution of metals in three Brazilian hyperaccumulator species (Pfaffia sarcophylla, Justicia lanstyakii, and Lippia lupulina) growing in one of the world’s largest mafic–ultramafic complexes. Methods Concentrations of Ni and other metals in leaves were determined using portable X-ray fluorescence (pXRF) and inductively coupled plasma optical emission spectroscopy (ICP-OES). Synchrotron-based X-ray microfluorescence (SR-µXRF) was employed to map the spatial distribution of metals across intact leaves. Results: The results revealed leaf Ni concentrations ranging from 320 to 1,950 mg kg⁻ 1 in P. sarcophylla, 1,640 to 6,810 mg kg⁻ 1 in L. lupulina, and 1,990 to 4,900 mg kg⁻ 1 in J. lanstyakii. Nickel, Mn, and Co exhibited similar distribution patterns, concentrating mainly in the leaf margins and veins across all species, while Ca, K, and Mg co-localization suggests regulatory mechanisms for adaptation. Conclusion: Although these plants exhibited Ni hyperaccumulation, our findings suggest limited commercial potential for agromining. Further research on genetic variability and nutrient assimilation, particularly in P. sarcophylla, is recommended to elucidate the mechanisms underlying Ni accumulation and intraspecific variability.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Time-resolved targeted metabolomics shows an abrupt switch from Calvin-Benson-Bassham cycle to tricarboxylic acid cycle when the light is turned off

Abstract In leaves, major CO₂ fluxes alternate between fixation by the Calvin-Benson-Bassham (CBB) cycle during light and release by the tricarboxylic acid (TCA) cycle in darkness. The speed at which leaf metabolism transitions between these pathways likely influences plant tolerance to fluctuating light conditions. To investigate these rapid metabolic shifts, we exposed leaves to ¹³CO₂ for 20 min to establish a quasi-steady state before abruptly turning off the light while maintaining ¹³CO₂ feeding. Within 10 s of dark transition, 3-phosphoglycerate levels rose significantly while most other CBB cycle intermediates decreased by more than 90%. Simultaneously, carbon accumulated in alanine, likely via pyruvate. Over the subsequent 10 min, six- and five-carbon TCA cycle intermediates steadily increased. In contrast, four-carbon TCA intermediates peaked at one minute, declined at three minutes, and rose again at 10 min, a pattern mirrored by most measured amino acids. These results reveal an exceptionally rapid metabolic reconfiguration from CO₂ fixation by the CBB cycle in light to TCA cycle activation for energy production in darkness, accompanied by substantial changes in amino acid metabolism.

Plant Sciences↗
DOE OSTI2022

Genome-wide identification and functional prediction of silicon (Si) transporters in poplar (Populus trichocarpa)

Abstract Silicon (Si) enhances plant tolerance to various biotic and abiotic stressors such as salinity, drought, and heat. In addition, Si can be biomineralized within plants to form organic carbon-containing phytoliths that can have ecosystem-level consequences by contributing to long-term carbon sequestration. Si is taken up and transported in plants via different transporter proteins such as influx transporters (e.g., Lsi1, Lsi6) and efflux transporters (e.g., Lsi2). Additionally, the imported Si can be deposited in plant leaves via silicification process using the Siliplant 1 (e.g., Slp1) protein. Functional homologs of these proteins have been reported in different food crops. Here, we performed a genome-wide analysis to identify different Si transporters and Slp1 homologs in the bioenergy crop poplar ( Populus trichocarpa Torr. and A. Gray ex W. Hook). We identified one channel-type Si influx transporter (PtLsi1; Potri.017G083300), one Si efflux transporter (PtLsi2; Potri.012G144000) and two proteins like Slp1 (PtSlp1a; Potri.004G168600 and PtSlp1b; Potri.009G129900 ) in the P. trichocarpa genome. We found a unique sequence (KPKPPVFKPPPVPI) in PtSlp1a which is repeated six times. Repeated presence of this sequence in PtSlp1a indicates that this protein might be important for silicification processes in P. trichocarpa. The mutation profiles of different Si transporters in a P. trichocarpa genome-wide association study population identified significant and impactful mutations in Potri.004G168600 and Potri.009G129900 . Using a publically accessible database ( http://bar.utoronto.ca/eplant_poplar/ ), digital expression analysis of the putative Si transporters in P. trichocarpa found low to moderate expression in the anticipated tissues, such as roots and leaves. Subcellular localization analysis found that PtLsi1/PtLsi2 are localized in the plasma membrane, whereas PtSlp1a/PtSlp1b are found in the extracellular spaces. Protein–Protein interaction analysis of PtLsi1/PtLsi2 identified Delta-1-pyrroline-5-carboxylate synthase (P5CS) as one of the main interacting partners of PtLsi2, which plays a key role in proline biosynthesis. Proline is a well-known participant in biotic and abiotic stress tolerance in plants. These findings will reinforce future efforts to modify Si accumulation for enhancing plant stress tolerance and carbon sequestration in poplar.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Energy balance in the DSSAT-CSM-CROPGRO model

One potential way to improve crop growth models is for the models to predict energy balance and evapotranspiration (ET) from first principles, thus serving as a check on “engineered” ET methodology. In this paper, we present new implementations and the results of an energy balance model (EBL) developed by Jagtap and Jones (1989) and then implemented in DSSAT’s CROPGRO (CG-EBL) model by Pickering et al. (1995) as a linked energy balance-photosynthesis model that has not been field-tested until now. The energy balance code computes evapotranspiration and other energy balance components, as well as a canopy air temperature, based on three sources (sunlit leaves, shaded leaves, soil surface). Model performance was evaluated with measured biomass and energy fluxes from two sites in Nebraska, namely, the US-Ne2 irrigated maize-soybean rotation field and the US-Ne3 rainfed maize-soybean rotation field, which are part of the Ameriflux eddy covariance network (htt ps://ameriflux.lbl.gov/sites). After implementing new aerodynamic resistances and the stomatal conductance model of the Ball–Berry–Leuning, crop growth, evapotranspiration and soil temperature were simulated well by the EBL model. The EBL improved ET predictions slightly over the often-used FAO56 method [Penman–Monteith (Allen et al., 1998)] for 4 of the 5 years evaluated for both irrigated and rainfed conditions. Further, a significant improvement was achieved using EBL for the simulation of soil temperature at the various depths compared to STEMP, the original subroutine in DSSAT for simulating soil temperature. Compared to the other available DSSAT methods, the EBL explicitly simulates the impacts of crop morphology, physiology and management on the crop’s environment and energy and mass exchange, which in turn directly affect the water use and irrigation requirements, phenology, photosynthesis, growth, sterility, and yield of the crop.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Aboveground and belowground contributions to ecosystem respiration in a temperate deciduous forest

In this study, we developed a three-way carbon dioxide (CO 2 ) flux-partitioning algorithm that separates net ecosystem exchange (NEE) into aboveground plant respiration (R above ), belowground root and soil respiration (R below ), and gross primary production (GPP). We applied this algorithm to a coupled dataset of continuous chamber-measured soil respiration and eddy covariance (EC)-measured NEE of CO 2 in an oak-hickory (Quercus-Carya) deciduous broadleaf forest from 2006 to 2015. We found that on annual time scale, R below dominated over R above with the former accounting for 66.9–86.4% and the latter 13.6–33.1%, of the total ecosystem respiration (R eco ). The ratio of R below to R above varied seasonally, ranging from 1.77 to 7.25 in growing season, and 1.02 to 4.57 in non-growing season. The temperature sensitivity (E 0 ) of R below was significantly higher than that of R above , and E 0 of R eco responded differently to air and soil temperature. Over the whole study period, annual mean R above , R below , and GPP were 243, 806, and 1170 g C m –2 , respectively, with annual R eco accounting for 89.6% of GPP, of which 68.8% was lost as R below and 20.8% lost as R above , and leaving only 10% of the carbon fixation in ecosystems. Furthermore, these estimates, however, did not consider potential light inhibition of leaf respiration. If we accept the presence of light inhibition, then the daytime three-way partitioning method would underestimate annual R above by 20.4% whereas the nighttime method would overestimate R above by 23.9% and GPP by 4.7%, compared with estimates accounting for light inhibition in leaves.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Nitrogen derived from Combined Algal Processing supports algae cultivation for biofuels

Algae biomass, a biofuel feedstock with potential to reduce global CO 2 emissions, is currently too expensive Nitrogen, a significant input and life cycle cost, requires research on recycling and additional sources to reduce costs. Integral to nitrogen recycling is the knowledge of actual nitrogen requirements in outdoor ponds, thus data from the Unified Field Studies of the Algae Testbed Public-Private Partnership was analyzed. The data showed that Nannochloropsis oceanica used 14–24 mg/L NH 4 + per harvest cycle for robust growth. Nitrogen recycled directly from the algae conversion process will likely be the primary source of nitrogen for algae cultivation. Harvested algae can be fractionated via Combined Algal Processing (CAP), where algae are pretreated, fermented, and the fuel feedstocks (e. g. ethanol, lipids) are removed leaving a nitrogen rich slurry. Chlorella vulgaris grew robustly in nitrogen-free media supplemented with CAP residues through 4 harvest cycles with no inhibition. The amount of nitrogen as free ammonium available for recycling directly without further processing was insufficient (~4% of total needed), thus the nitrogen fixing bacteria, Azotobacter vinelandii, was investigated as a means for increasing ammonium concentration in CAP residues. This organism was shown to be proficient at growth on sugars liberated from algae biomass during pretreatment and sustained algae growth using A. vinelandii supernatants was also demonstrated. Using Azotobacter to increase ammonium concentrations on-site using an inexpensive biological process to generate the necessary ammonium for outdoor algae cultivation improves sustainability of algae biofuels by avoiding the energy intensive steps of typical ammonium production and transport. Furthermore, these results show that byproducts of algae conversion begin to close nitrogen demand and, with further supplementation by diazotrophic bacteria or protein hydrolysis, may completely replace current energyintensive and costly industrial nitrogen sources offering a path to increased economic feasibility and improved life cycle analysis of algae-based biofuels.

09 BIOMASS FUELS↗
DOE OSTI2022

Evaluating the performance of random forest and iterative random forest based methods when applied to gene expression data

Gene-to-gene networks, such as Gene Regulatory Networks (GRN) and Predictive Expression Networks (PEN) capture relationships between genes and are beneficial for use in downstream biological analyses. There exists multiple network inference tools to produce these gene-to-gene networks from matrices of gene expression data. Random Forest-Leave One Out Prediction (RF-LOOP) is a method that has been shown to be efficient at producing these gene-to-gene networks, frequently known as GEne Network Inference with Ensemble of trees (GENIE3). Random Forest can be replaced in this process by iterative Random Forest (iRF), which performs variable selection and boosting. Here we validate that iterative Random Forest-Leave One Out Prediction (iRF-LOOP) produces higher quality networks than GENIE3 (RF-LOOP). We use both synthetic and empirical networks from the Dialogue for Reverse Engineering Assessment and Methods (DREAM) Challenges by Sage Bionetworks, as well as two additional empirical networks created from Arabidopsis thaliana and Populus trichocarpa expression data.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Neutrino self-interactions: A white paper

Neutrinos are the Standard Model (SM) particles which we understand the least, often due to how weakly they interact with the other SM particles. Beyond this, very little is known about interactions among the neutrinos, i.e., their self-interactions. The SM predicts neutrino self-interactions at a level beyond any current experimental capabilities, leaving open the possibility for beyond-the-SM interactions across many energy scales. In this white paper, we review the current knowledge of neutrino self-interactions from a vast array of probes, from cosmology, to astrophysics, to the laboratory. Furthermore, we also discuss theoretical motivations for such self-interactions, including neutrino masses and possible connections to dark matter. Looking forward, we discuss the capabilities of searches in the next generation and beyond, highlighting the possibility of future discovery of this beyond-the-SM physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Cluster analysis of occupancy schedules in residential buildings in the United States

The energy performance of residential buildings significantly depends on the building occupants’ behavior, which can be highly variable. When the heating, ventilation and air conditioning (HVAC) system is controlled based on the presence or absence of occupants in a building, occupant behavior is of even further importance to its energy performance. In current practice, building energy simulation tools generally use a single occupancy profile to represent the building’s occupancy schedule, the schedule of which is considered to be the same, regardless of the type of household being modeled. Thus, there is significant potential for improvement to allow for more flexibility and accuracy in calculation of occupancy. The objective of this study is to assess the variations in the typical types of occupancy schedules followed by the U.S. population using cluster analysis. American Time Use Survey data, which statically represents the overall U.S. population’s activities, across 12 years (2006–2017), is used. The ATUS data is segregated into smaller groups based on age and weekday/weekend, then divided into activities that are considered “at home” and “away from home”, which are mapped to the presence or non-presence of occupants in the home. Cluster analysis is then used to identify common types of occupancy schedule patterns for each age group. Three main types of patterns are obtained from cluster analysis for each age group, which together represent approximately 88% of people in the United States. The output of the cluster analysis is further analyzed to evaluate the variation in characteristics, including the number of times leaving home, time of day when leaving the home, and the timespan of absence from the home. The results of this study provide detailed insights on how typical occupants in the United States spend their time in residential spaces which can be used to create occupancy profiles for residential buildings. Finally, these occupancy profiles could be utilized inform an assessment of the energy use impact of occupancy-based controls of energy consuming systems and technologies.

42 ENGINEERING↗
DOE OSTI2020

Citric acid-assisted accumulation of Ni and other metals by Odontarrhena muralis: Implications for phytoextraction and metal foliar distribution assessed by μ-SXRF

Odontarrhena muralis is one of the most promissing plant species for Ni phytomining, and soil amendments can further increase its Ni phytoextraction ability. Here we investigated whether Ni phytomining/phytoremediation using this Ni hyperaccumulator can benefit from applying citric acid to a serpentine soil that is naturally enriched in Ni (>1000 mg kg -1 ). Synchrotron micro X-ray fluorescence (μ-SXRF) was used to image Ni and other metal distributions in whole fresh leaves of O. muralis. Leaf Ni accumulation in plants grown on citric acid-amended soil increased up to 55% while Co, Cr, Fe, Mn, and Zn concentrations were 4-, 14-, 6-, 7- and 1.3-fold higher than the control treatment. O. muralis presented high bioconcentration factors (leaf to soil concentration ratio) to Ni and Zn whereas Cr was seemingly excluded from uptake. The μ-SXRF images showed a uniform distribution of Ni, preferential localization of Co in the leaf tip, and clear concentration of Mn in the base of trichomes. The citric acid treatments strongly increased the Co fluoerescence intensity in the leaf tip and altered the spatial distribution of Mn across the leaf, but there was no difference in Ni fluorescence counts between the trichome-base region and the bulk leaf. Our data from a serpentine soil suggests that citrate treatment enhances Ni uptake, but Co is excreted from leaves even in low leaf concentrations, which can make Co phytoming using O. muralis unfeasible in natural serpentine soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Species- and element-specific patterns of metal flux from contaminated wetlands versus metals shed with exuviae in emerging dragonflies

Dragonfly adults and their aquatic immature stages are important parts of food webs and provide a link between aquatic and terrestrial components. During emergence, contaminants can be exported into terrestrial food webs as immature adults fly away or be shed with their exuviae and remain in the wetland. Our previous work established metals accumulating in dragonfly nymphs throughout a contaminated constructed wetland designed to regulate pH and sequester trace metals from an industrial effluent line. In this paper we evaluated the concentration and mass of metals leaving the wetland in flying emergents versus remaining in the wetland with the shed exuviae in 10 species of dragonflies belonging to 8 genera. Nine elements (Cu, Zn, Cd, Mn, V, Mg, Fe, Al, Pb) were evaluated that include essential and nonessential elements as well as trace and major metals. Metal concentrations in the emergent body and exuviae can differ by orders of magnitude. Aluminum, Fe, Mn, and Pb were largely shed in the exuviae. Vanadium and Cd were more variable among species but also tended to be shed with the exuviae. In contrast, Cu, Zn, and Mg showed a higher tendency to leave the wetland with an emerging dragonfly. Metals shed in dragonfly exuviae can moderate the transport of metals from contaminated wetlands. Taxonomic- and metal-specific variability in daily metal flux from the wetland depended upon concentration accumulated, individual body mass, and number of individuals emerging, with each factor's relative importance often differing among species. This illustrates the importance of evaluating the mass of metals in an individual and not only concentrations. Furthermore, differences in numbers of each species emerging will magnify differences in individual metal flux when calculating community metal flux. A better understanding of the variability of metal accumulation in nymphs/larvae and metal shedding during metamorphosis among both metals and species is needed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Quaternized chitosan as a biopolymer sanitizer for leafy vegetables: synthesis, characteristics, and traditional vs. dry nano-aerosol applications

A series of quaternary dimethyl-(alkyl)-ammonium chitosan derivatives (QACs) was synthesized and studied for physicochemical properties and bioactivity. The QACs tended to spontaneously self-assembly into nanoaggregates. Antimicrobial activity was examined in vitro on Gram-negative Escherichia coli (E. coli) and Gram-positive Listeria innocua (L. innocua) bacteria as well as phytopathogenic fungus Botrytis cinerea. The hexyl chain-substituted QAC-6 demonstrated the highest potency causing 3.0- and 4.5-log CFU mL-1 reduction of E. coli and L. innocua, respectively. QAC-6 was tested for antimicrobial activity on stainless steel coupons and fresh spinach leaves. A traditional ‘wet’ application (spray) and dry Engineered Water Nanostructure (EWNS) approach were used for spinach decontamination. With both approaches, significant reduction of microbial load on the treated produce was achieved. Finally, the wet application showed a greater reduction of microbial load, while the advantages of EWNS were reaching the antimicrobial effect with miniscule dose of active agent leaving treated surface visibly dry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

scPlantAnnotate: an accurate and robust transformer-based model for plant cell type annotation

Accurate cell type annotation remains a major bottleneck in plant single-cell RNA sequencing (scRNA-seq), where existing tools are often adapted from animal studies and perform sub-optimally on plant data. The lack of plant-specific computational frameworks limits the construction of plant cell atlases and downstream biological discovery. We develop and evaluate scPlantAnnotate, a Transformer-based reference annotation framework tailored for plant scRNA-seq data, and benchmark it against state-of-the-art deep learning and conventional methods across multiple plant species. Species-specific scPlantAnnotate models were trained using curated datasets from Arabidopsis thaliana, Zea mays, Oryza sativa, and Glycine max. We compared scPlantAnnotate with leading baselines under both standard random-split evaluation and a more stringent leave-one-dataset-out setting, which tests robustness to completely unseen datasets and tissue types. scPlantAnnotate consistently outperforms existing approaches across all four species under random-split evaluation. In the leave-one-dataset-out setting for A. thaliana, where performance drops markedly for all methods due to strong batch effects and dataset heterogeneity, scPlantAnnotate nonetheless achieves the highest Accuracy, Macro-F1, Balanced Accuracy, and Macro-AUROC on average and ranks first on most held-out datasets. These results demonstrate improved robustness to dataset shifts, a critical yet underexplored challenge in plant scRNA-seq analysis. A freely accessible web server enables users to annotate their own datasets using pretrained models. scPlantAnnotate provides a plant-specific, Transformer-based framework for single-cell annotation that delivers state-of-the-art performance and enhanced robustness to unseen datasets. By addressing limitations of existing tools and enabling scalable reference-based annotation, scPlantAnnotate supports the development of comprehensive plant cell atlases and facilitates broader use of single-cell genomics in plant biology.

Bioinformatics↗
DOE OSTI2022

Scaling electrospray based additive manufacturing of polyamide membranes

Additive manufacturing based on electrospray printing has been demonstrated to fabricate polyamide membranes with separation properties similar to commercial membranes while also offering exceptional control of membrane thickness and roughness. In this work, we report on the scalability of the electrospray process to produce membrane leaves that are 10 times the area of membranes fabricated in literature through electrospray printing. The large membrane leaves exhibited salt rejection of >90% (at 2000 ppm feed salt concentration) and ∼0.7 LMH/bar flux, which is comparable to smaller printed membranes using the same process.

Additive manufacturing↗