Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum state compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Ferromagnetism beyond Lieb's theorem

The noninteracting electronic structures of tight-binding models on bipartite lattices with unequal numbers of sites in the two sublattices have a number of unique features, including the presence of spatially localized eigenstates and flat bands. When a uniform on-site Hubbard interaction U is turned on, Lieb proved rigorously that at half-filling (ρ = 1) the ground state has a nonzero spin. In this paper we consider a “CuO 2 lattice” (also known as “Lieb lattice,” or as a decorated square lattice), in which “d orbitals” occupy the vertices of the squares, while “ p orbitals” lie halfway between two d orbitals; both d and p orbitals can accommodate only up to two electrons. We use exact determinant quantum Monte Carlo (DQMC) simulations to quantify the nature of magnetic order through the behavior of correlation functions and sublattice magnetizations in the different orbitals as a function of U and temperature; we have also calculated the projected density of states, and the compressibility. Here, we study both the homogeneous (H) case, U d = U p , originally considered by Lieb, and the inhomogeneous (IH) case, U d ≠ U p . For the H case at half-filling, we found that the global magnetization rises sharply at weak coupling, and then stabilizes towards the strong-coupling (Heisenberg) value, as a result of the interplay between the ferromagnetism of like sites and the antiferromagnetism between unlike sites; we verified that the system is an insulator for all U. For the IH system at half-filling, we argue that the case U p ≠ U d falls under Lieb's theorem, provided they are positive definite, so we used DQMC to probe the cases U p = 0, U d = U and Up = U, U d = 0. We found that the different environments of d and p sites lead to a ferromagnetic insulator when U d = 0; by contrast, U p = 0 leads to to a metal without any magnetic ordering. In addition, we have also established that at density ρ = 1/3, strong antiferromagnetic correlations set in, caused by the presence of one fermion on each d site.

36 MATERIALS SCIENCE↗

Field-tailoring quantum materials via magneto-synthesis: metastable metallic and magnetically suppressed phases in a trimer iridate

We demonstrate that applying modest magnetic fields (< 0.1 T) during high-temperature crystal growth can profoundly alter the structure and ground state of a spin-orbit-coupled, antiferromagnetic trimer lattice. Using BaIrO₃ as a model system, whose ground state is intricately dictated by the trimer lattice, we show that magneto-synthesis , a field-assisted synthesis approach, stabilizes a structurally compressed, metastable metallic and magnetically suppressed phases inaccessible via conventional methods. These effects include a 0.85% reduction in unit cell, 4-order-of-magnitude decrease in resistivity, a 10-fold enhancement of the Sommerfeld coefficient, and the collapse of long-range magnetic order -- all intrinsic and bulk in origin. First-principles calculations confirm that the field-stabilized structure lies substantially above the ground state in energy, highlighting its metastable character. These large, coherent and correlated changes across multiple bulk properties, unlike those caused by dilute impurities, defects or off-stoichiometry, point to an intrinsic field-induced mechanism. The findings establish magneto-synthesis as a powerful new pathway for accessing non-equilibrium quantum phases in strongly correlated materials.

magneto-synthesis↗

Modeling atomically mixed graded density impactors

Graded density impactors (GDIs) are multi-material composite impactors used in gas gun experiments to tailor the drive conditions imparted to a sample test material. Previous graded density impactors generally rely on thin, but discrete, layers of different materials. The thinner and the greater number of layers will result in smoother compression. Taken to the limit of very thin layers would be pure material 1 at one surface, such as the front surface of an impactor, smoothly transitioning at the atomic scale to pure material 2 on the back surface. Such an impactor can initially shock, then smoothly compresses a material during a dynamic experiment. This type of experiment can serve to explore a larger region of thermodynamic space than a single or even multi-shock experiments. An overview of how graded density impactors are made is reviewed and sample results are given. Additionally, a strategy for modeling these kinds of impactors is presented. The length scales of constituent mixing are given from the experimental build through electrochemical-deposition. Equation of state models for pure constituents and their subsequent mixtures are presented. It is demonstrated that the time scales for pressure and temperature equilibration, for atomically mixed GDIs, are short enough to be a justifiable closure for the resulting multiphase flow. Furthermore, we present simulation results of dynamic shock followed by a ramp compression, utilizing a silver/gold graded density impactor, onto a tantalum sample.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exponential Increase in the Resistivity upon Cooling and Superconductivity in Indium-Doped Pb{sub 0.45}Sn{sub 0.55}Te

We have analyzed the temperature and magnetic-field dependences of resistivity ρ(T, H) of semiconducting compound Pb{sub 0.45}Sn{sub 0.55}Te doped with 5 at % In under a hydrostatic compression at P < 12 kbar. It is found that the temperature dependence ρ(T) at all pressures at T < 100 K is exponential with the activation energy decreasing upon an increase in pressure; this is accompanied with a superconducting transition on the ρ(T) and ρ(H) dependences at P > 4.8 kbar at T > 1 K (T{sub c} = 1.72 K at a level of 0.5ρ{sub N} at P = 6.8 kbar). We consider the model describing the low-temperature “dielectrization” of the semiconducting solid solution and the formation of the superconducting state upon an increase in the hydrostatic compression P > 4 kbar.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Poincare recurrence and spectral cascades in three-dimensional quantum turbulence

The time evolution of the ground state wave function of a zero-temperature Bose-Einstein condensate (BEC) gas is well described by the Hamiltonian Gross-Pitaevskii (GP) equation. Using a set of appropriately interleaved unitary collision-stream operators, a qubit lattice gas algorithm is devised, which on taking moments, recovers the Gross-Pitaevskii (GP) equation under diffusion ordering (time scales as length{sup 2}). Unexpectedly, there is a class of initial states whose Poincare recurrence time is extremely short and which, as the grid resolution is increased, scales with diffusion ordering (and not as length{sup 3}). The spectral results of J. Yepez et al.[Phys. Rev. Lett. 103, 084501 (2009).] for quantum turbulence are revised and it is found that it is the compressible kinetic energy spectrum that exhibits three distinct spectral regions: a small-k classical-like Kolmogorov k{sup -5/3}, a steep semiclassical cascade region, and a large-k quantum vortex spectrum k{sup -3}. For most evolution times the incompressible kinetic energy spectrum exhibits a somewhat robust quantum vortex spectrum of k{sup -3} for an extended range in k with a k{sup -3.4} spectrum for intermediate k. For linear vortices of winding number 1 there is an intermittent loss of the quantum vortex cascade with its signature seen in the time evolution of the kinetic energy E{sub kin}(t), the loss of the quantum vortex k{sup -3} spectrum in the incompressible kinetic energy spectrum as well as the minimalization of the vortex core isosurfaces that would totally inhibit any Kelvin wave vortex cascade. In the time intervals around these intermittencies the incompressible kinetic energy also exhibits a multicascade spectrum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Double-layer shocks in a magnetized quantum plasma

The formation of small but finite amplitude electrostatic shocks in the propagation of quantum ion-acoustic waves obliquely to an external magnetic field is reported in a quantum electron-positron-ion plasma. Such shocks are seen to have double-layer (DL) structures composed of the compressive and accompanying rarefactive slow-wave fronts. Existence of such DL shocks depends critically on the quantum coupling parameter H associated with the Bohm potential and the positron to electron density ratio {delta}. The profiles may, however, steepen initially and reach a steady state with a number of solitary waves in front of the shocks. Such novel DL shocks could be a good candidate for particle acceleration in intense laser-solid density plasma interaction experiments as well as in compact astrophysical objects, e.g., magnetized white dwarfs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Toward real-time quantum imaging with a single pixel camera

In this paper, we present a workbench for the study of real-time quantum imaging by measuring the frame-by-frame quantum noise reduction of multi-spatial-mode twin beams generated by four wave mixing in Rb vapor. Exploiting the multiple spatial modes of this squeezed light source, we utilize spatial light modulators to selectively pass macropixels of quantum correlated modes from each of the twin beams to a high quantum efficiency balanced detector. Finally, in low-light-level imaging applications, the ability to measure the quantum correlations between individual spatial modes and macropixels of spatial modes with a single pixel camera will facilitate compressive quantum imaging with sensitivity below the photon shot noise limit.

47 OTHER INSTRUMENTATION↗

IMPROVED BAR IMPACT TESTS USING A PHOTONIC DOPPLER VELOCIMETER

Bar impact tests, using the techniques described elsewhere in this symposium, were used to measure compressive and tensile strengths of borosilicate glass, soda lime glass, and a glass ceramic. The glass ceramic was 25% crystalline spinel, furnished by Corning Inc. There are two measures of compressive strength: the peak stress that can be transmitted in unconfined compression, and the 'steady state' strength. For borosilicate glass and soda lime glass, these values were similar, being about 1.8 and 1.5 GPa, respectively. The glass ceramic (25% spinel) was almost 50% stronger. Tensile failure in the glass and glass ceramic takes places via surface flaws, and thus tensile strength is an extrinsic, as opposed to intrinsic property.

36 MATERIALS SCIENCE↗

Temporal compression of quantum-information-carrying photons using a photon-echo quantum memory approach

We study quantum compression and decompression of light pulses that carry quantum information using a photon-echo quantum memory technique with controllable inhomogeneous broadening of an isolated atomic absorption line. We investigate media with differently broadened absorption profiles, transverse and longitudinal, finding that the recall efficiency can be as large as unity and that the quantum information encoded into the photonic qubits can remain unperturbed. Our results provide insight into reversible light-atom interaction and are interesting in view of future quantum communication networks, where pulse compression and decompression may play an important role in increasing the qubit rate or in mapping quantum information from photonic carriers with large optical bandwidth into atomic memories with smaller bandwidth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chains of quantum dot molecules grown on Si surface pre-patterned by ion-assisted nanoimprint lithography

An original approach based on the combination of nanoimprint lithography and ion irradiation through mask has been developed for fabrication of large-area periodical pattern on Si(100). Using the selective etching of regions amorphized by ion irradiation ordered structures with grooves and ridges were obtained. The shape and depth of the relief were governed by ion energy and by the number of etching stages as well. Laterally ordered chains of Ge quantum dots were fabricated by molecular beam epitaxy of Ge on the pre-patterned Si substrates. For small amount of Ge deposited chains contain separate quantum dot molecules. The increase of deposition amount leads to overlapping of quantum dot molecules with formation of dense homogeneous chains of quantum dots. It was shown that the residual irradiation-induced bulk defects underneath the grooves suppress nucleation of Ge islands at the bottom of grooves. On pre-patterned substrates with whole defect regions, etched quantum dots grow at the bottom of grooves. The observed location of Ge quantum dots is interpreted in terms of local strain-mediated surface chemical potential which controls the sites of islands nucleation. The local chemical potential is affected by additional strain formed by the residual defects. It was shown by molecular dynamics calculations that these defects form the compressive strain at the bottom of grooves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum-Inspired Bayesian Sampling for Uncertainty Quantification and Machine Learning (Final Technical Report)

With increasing simulation and measurement data, machine learning and artificial intelligence have been widely used in computational decision-making of complex engineering systems. The resulting tools, such as uncertainty quantification solvers, reinforcement learning, and physics-informed machine learning, have achieved great success in critical DOE tasks such as material discovery and design, energy system modeling and control, and numerical weather and climate prediction. A core topic in scientific machine learning and artificial intelligence is Bayesian inference: given an observed data set, people want to estimate the posterior distribution of a (possibly large) number of hidden parameters. Due to the flexibility and weak assumptions, Bayesian sampling has been the mainstream Bayesian inference solvers despite the rapid progress of approximate Bayesian inference. Classical Bayesian sampling methods such as Markov-chain Monte Carlo suffer from a low-acceptance rate due to the random walk nature, therefore state-of-the-art techniques use Hamiltonian Monte Carlo and its variants to efficiently draw posterior samples in a high dimension. The key idea of Hamiltonian Monte Carlo and its variants is to simulate the Hamiltonian dynamics of a classical particle with a fixed mass, and their performance significantly degrades when the posterior distribution is highly spiky or has multiple modes. Leveraging the idea of quantum physics, this project has investigated new theory, algorithms and applications of Bayesian inference (especially Bayesian sampling). The main results include: (1) novel quantum-inspired Bayesian sampling methods that can lead to better accuracy for challenging multi-modal or spiky distributions, (2) more scalable machine learning framework leveraging tensor-compressed Bayesian inference, and (3) Bayesian and sampling approaches for verifying the robustness of continuous and binary neural networks.

97 MATHEMATICS AND COMPUTING↗

Mesoscale Simulations of Power Compaction

Mesoscale 3D simulations of metal and ceramic powder compaction in shock waves have been performed with an Eulerian hydrocode GEODYN. The approach was validated by simulating shock compaction of porous well-characterized ductile metal using Steinberg material model. Results of the simulations with handbook values for parameters of solid 2024 aluminum have good agreement with experimental compaction curves and wave profiles. Brittle ceramic materials are not so well studied as metals, so material model for ceramic (tungsten carbide) has been fitted to shock compression experiments of non-porous samples and further calibrated to match experimental compaction curves. Direct simulations of gas gun experiments with ceramic powder have been performed and showed good agreement with experimental data. Numerical shock wave profile has same character and thickness as measured with VISAR. Numerical results show reshock states above the single-shock Hugoniot line also observed in experiments. They found that to receive good quantitative agreement with experiment it is essential to perform 3D simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reply to “Comment on ‘Prebiotic Chemistry Within a Simple Impacting Icy Mixture’”

In a recent article in this journal, we use quantum simulations to describe the possible formation of prebiotic material from impacting astrophysical icy mixtures on early Earth. Our model system included only simple starting materials found in cometary material, namely a mixture of 2 H 2 O:1 CO:1 CO 2 :1 CH 3 OH:1 NH 3 . Here, we have cycled this mixture sequentially through all of the thermodynamic states of an impact event: shock compression due to impact (high temperature, high pressure end states), expansion to ambient pressures (high temperature, low pressure end states), and cooling to ambient temperatures (low temperature, low pressure end states). Our results predicted that a number of prebiotic materials could be synthesized ultimately upon relaxing to a low temperature, low pressure state, including protein-forming amino acids. Amino acids and peptides are known to be metastable compounds with high activation energies for decomposition. Here, our predictions have since been confirmed by recent gas gun experiments on an icy mixture of similar composition and at similar thermodynamic conditions to our studies, where the protein forming amino acids glycine and alanine were detected as end products.

36 MATERIALS SCIENCE↗

Controlling structural phases of Sn through lattice engineering

Topology and superconductivity, two distinct phenomena, offer unique insight into quantum properties and their applications in quantum technologies, spintronics, and sustainable energy technologies. Tin (Sn) plays a pivotal role here as an element because of its two structural phases, α-Sn exhibiting topological characteristics and β-Sn showing superconductivity. Here, we demonstrate precise control of these phases in Sn thin films using molecular beam epitaxy with systematically varied lattice parameters of the buffer layer. The Sn films exhibit either β-Sn or α-Sn phases as the buffer layer's lattice constant varies from 6.10 Å to 6.48 Å, spanning the range from GaSb (like InAs) to InSb. Further, the crystal structures of α- and β-Sn films are characterized by x-ray diffraction and confirmed by Raman spectroscopy and scanning transmission electron microscopy. Atomic force microscopy validates the smooth, continuous surface morphology. Electrical transport measurements further verify the phases: resistance drop near 3.7 K for β-Sn superconductivity and Shubnikov-de Haas oscillations for α-Sn topological characteristics. Density functional theory shows that α-Sn is stable under tensile strain and β-Sn under compressive strain, aligning well with experimental findings. Hence, this study introduces a platform controlling Sn phases through lattice engineering, enabling innovative applications in quantum technologies and beyond.

36 MATERIALS SCIENCE↗

Algebraic compression of quantum circuits for Hamiltonian evolution

Here unitary evolution under a time-dependent Hamiltonian is a key component of simulation on quantum hardware. Synthesizing the corresponding quantum circuit is typically done by breaking the evolution into small time steps, also known as Trotterization, which leads to circuits the depth of which scales with the number of steps. When the circuit elements are limited to a subset of SU(4) - or equivalently, when the Hamiltonian may be mapped onto free fermionic models - several identities exist that combine and simplify the circuit. Based on this, we present an algorithm that compresses the Trotter steps into a single block of quantum gates using algebraic relations between adjacent circuit elements. This results in a fixed depth time evolution for certain classes of Hamiltonians. We explicitly show how this algorithm works for several spin models, and demonstrate its use for adiabatic state preparation of the transverse field Ising model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational investigation of water glasses using machine-learning potentials

The molecular origins of water’s anomalous properties have long been a subject of scientific inquiry. The liquid–liquid phase transition hypothesis, which posits the existence of distinct low-density and high-density liquid states separated by a first-order phase transition terminating at a critical point, has gained increasing experimental and computational support and offers a thermodynamically consistent framework for many of water’s anomalies. However, experimental challenges in avoiding crystallization near the postulated liquid–liquid critical point have focused attention to water’s canonical glassy states: low-density and high-density amorphous ice. Here, we use two Deep Potential machine-learning models, trained on the Strongly Constrained and Appropriately Normed density functional and the highly accurate Many-Body Polarizable potential, to conduct an investigation of water’s glassy phenomenology based on quantum mechanical calculations. Despite not being explicitly trained on amorphous ices, both models accurately capture the structure and transformation of the water glasses, including their interconversion along different thermodynamic paths. Isobaric quenching of liquid water at various pressures generates a continuum of intermediate amorphous ices and density fluctuations increase near the liquid–liquid critical pressure. The glass transition temperatures of the amorphous ices produced at different pressures exhibit two distinct branches, corresponding to low-density and high-density amorphous ice behaviors, consistent with experiment and the liquid–liquid transition hypothesis. Extrapolating transformation pressures from isothermal compressions to experimental compression rates brings our simulations into excellent agreement with data. Our findings demonstrate that machine-learning potentials trained on equilibrium phases can effectively model nonequilibrium glassy behavior and pave the way for studying long-timescale, out-of-equilibrium processes with quantum mechanical accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Phase Transition of Zn0.854Cu0.146O Under High Pressure

Pressure induced phase transition of hexagonal Zn{sub 0.854}Cu{sub 0.146}O is studied by using synchrotron angle dispersive X-ray diffraction (ADXRD) up to 43.1 GPa at room temperature. A structural transformation from a hexagonal phase to a cubic phase is observed, which starts at 10.2 GPa and finishes at about 16.5 GPa. The phase transition leads to a volume collapse of 17% at 10.2 GPa. The cubic phase of Zn{sub 0.854}Cu{sub 0.146}O remains stable up to the highest experiment pressure. The pressure-volume data are fitted with the Birch-Murnaghan equation of state. The bulk modulus obtained upon compression from the fitting are 175(2) and 259(6) GPa for the hexagonal and cubic phases, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Size-tunable strain engineering in Ge nanocrystals embedded within SiO{sub 2} and Si{sub 3}N{sub 4}

We report a unique ability to control the sign and size of the stress within Ge nanocrystals or nanodots fabricated using a complementary metal-oxide-semiconductor-compatible process within SiO{sub 2} and Si{sub 3}N{sub 4} layers. Very large (as much as 4.5%), size-dependent compressive and tensile strains can be generated depending on whether the dot is embedded within either a Si{sub 3}N{sub 4} or a SiO{sub 2} layer. Raman measurements reveal significant anharmonicity for smaller Ge dots and possible distortions of the diamond cubic lattice as evidenced by the measured Grünesien parameters and confirmed by their transmission electron diffraction patterns. Two completely different mechanisms are proposed to explain the formation of the tensile and compressive strain states, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗