Search NASA⌕ Search

SEARCH · Search NASA

Results for “source potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Far-ultraviolet background observations at high galactic latitude. II - Diffuse emission

A single spectrum, of extremely long integration time, is used to place stringent new limits on the diffuse far-UV background in the 500-1200 A region. This spectrum, obtained in the vicinity of the North Galactic Pole with the Voyager 2 UV spectrometer, can be explained solely on the basis of resonant scattering from interplanetary H I and He I. Limits on any additional sources of sky background radiation corresponding to 100-200 photons/sq cm per sec/sr per A for continuum emission and 6000 photons/sq cm per sec/sr for line emission are demonstrated. Comparisons of these upper limits with existing measurements and various potential source mechanisms are discussed. The first detection of resonantly scattered interplanetary H I Ly-gamma (973 A) emission is reported.

Holberg, J. B.↗
DOE OSTI2025

Enhancing the Quantification of Critical Elements in WTE and Coal Ash via Alkaline Fusion: Superiority of Lithium Metaborate (LiBO 2 )

Ashes generated from coal combustion, as well as waste incineration, can be a potential source of critical elements necessary for the ongoing transition towards electrification and greener energy technologies. For the quantification of critical elements, traditional methods such as acid digestion are time-intensive and can fail to dissolve critical elements in refractory minerals. One potential solution is to adopt alkaline fusion for faster, total digestion. However, the role of flux choice and the subsequent digestion efficiency (DE) is unknown. Here, we report a systematic investigation on the feasibility of alkaline fusion with Lithium Metaborate (LiBO 2 ) and Lithium Tetraborate (Li 2 B 4 O 7 ) as fluxes for the digestion of two standard reference materials (BCR 176R and SRM 1633c). Our findings suggest that LiBO 2 yields higher DE values than Li 2 B 4 O 7 for several critical REEs and volatiles, such as Pb and Cd. Specifically, for REEs in SRM 1633c, the DE values with LiBO 2 are, on average, ~16 percent higher than those with Li 2 B 4 O 7 . Similarly, for Pb and Cd in BCR 176R, the DE values with LiBO 2 are ~20 percent higher than with Li 2 B 4 O 7 . These results suggest that LiBO 2 is a superior flux for rapid ash digestion.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS2012

The Precise Orbit and the Challenge of Long Term Stability

The computation of a precise orbit reference is a fundamental component of the altimetric measurement. Since the dawn of the modern altimeter age, orbit accuracy has been determined by the quality of the GPS, SLR, and DORIS tracking systems, the fidelity of the measurement and force models, and the choice of parameterization for the orbit solutions, and whether a dynamic or a reduced-dynamic strategy is used to calculate the orbits. At the start of the TOPEX mission, the inaccuracies in the modeling of static gravity, dynamic ocean tides, and the nonconservative forces dominated the orbit error budget. Much of the error due to dynamic mismodeling can be compensated by reduced-dynamic tracking techniques depending on the measurement system strength. In the last decade, the launch of the GRACE mission has eliminated the static gravity field as a concern, and the background force models and the terrestrial reference frame have been systematically refined. GPS systems have realized many improvements, including better modeling of the forces on the GPS spacecraft, large increases in the ground tracking network, and improved modeling of the GPS measurements. DORIS systems have achieved improvements through the use of new antennae, more stable monumentation, and of satellite receivers that can track multiple beacons, and as well as through improved modeling of the nonconservative forces. Many of these improvements have been applied in the new reprocessed time series of orbits produced for the ERS satellites, Envisat, TOPEX/Poseidon and the Jason satellites, and as well as for the most recent Cryosat-2 and HY2A. We now face the challenge of maintaining a stable orbit reference for these altimetric satellites. Changes in the time-variable gravity field of the Earth and how these are modelled have been shown to affect the orbit evolution, and the calibration of the altimetric data with tide gauges. The accuracy of the reference frame realizations, and their projection into the future remains a source of error. Other sources of omission error include the geocenter for which no consensus model is as of yet applied. Although progress has been made in nonconservative force modeling through the use of detailed satellite-specific models, radiation pressure modeling, and atmospheric density modeling remain a potential source of orbit error. The longer term influence of variations in the solar and terrestrial radiation fields over annual and solar cycles remains principally untested. Also the long term variation in optical and thermal properties of the space vehicle surfaces would contribute to biases in the orbital frame if ignored. We review the status of altimetric precision orbit determination as exemplified by the recent computations undertaken by the different analysis centers for ERS, Envisat, TOPEX/Poseidon, Jason, Cryosat2 and HY2A, and we provide a perspective on the challenges for future missions such as the Jason-3, SENTINEL-3 and SWOT.

Lemoine, Frank G.↗
NASA NTRS2010

An Accident Precursor Analysis Process Tailored for NASA Space Systems

Accident Precursor Analysis (APA) serves as the bridge between existing risk modeling activities, which are often based on historical or generic failure statistics, and system anomalies, which provide crucial information about the failure mechanisms that are actually operative in the system and which may differ in frequency or type from those in the various models. These discrepancies between the models (perceived risk) and the system (actual risk) provide the leading indication of an underappreciated risk. This paper presents an APA process developed specifically for NASA Earth-to-Orbit space systems. The purpose of the process is to identify and characterize potential sources of system risk as evidenced by anomalous events which, although not necessarily presenting an immediate safety impact, may indicate that an unknown or insufficiently understood risk-significant condition exists in the system. Such anomalous events are considered accident precursors because they signal the potential for severe consequences that may occur in the future, due to causes that are discernible from their occurrence today. Their early identification allows them to be integrated into the overall system risk model used to intbrm decisions relating to safety.

Groen, Frank↗
DOE OSTI2021

Local Explosion Detection and Infrasound Localization by Reverse Time Migration Using 3-D Finite-Difference Wave Propagation

Infrasound data are routinely used to detect and locate volcanic and other explosions, using both arrays and single sensor networks. However, at local distances (< km) topography often complicates acoustic propagation, resulting in inaccurate acoustic travel times leading to biased source locations when assuming straight-line propagation. Here we present a new method, termed Reverse Time Migration-Finite-Difference Time Domain (RTM-FDTD), that integrates numerical modeling into the standard RTM back-projection process. Travel time information is computed across the entire potential source grid via FDTD modeling to incorporate the effects of topography. The waveforms are then back-projected and stacked at each grid point, with the stack maximum corresponding to the likely source. We apply our method to three volcanoes with different network configurations, source-receiver distances, and topography. At Yasur Volcano, Vanuatu, RTM-FDTD locates explosions within ~20 m of the source and differentiates between multiple vents. RTM-FDTD produces a more accurate location for the two Yasur subcraters than standard RTM and doubles the number of detected events. At Sakurajima Volcano, Japan, RTM-FDTD locates the source within 50 m of the active vent despite notable topographic blocking. The RTM-FDTD location is similar to that from the Time Reversal Mirror method, but is more computationally efficient. Lastly, at Shishaldin Volcano, Alaska, RTM and RTM-FDTD both produce realistic source locations (<50 m) for ground-coupled airwaves recorded on a four-station seismic network. We show that RTM is an effective method to detect and locate infrasonic sources across a variety of scenarios, and by integrating numerical modeling, RTM-FDTD produces more accurate source locations and increases the detection capability.

58 GEOSCIENCES↗
NASA NTRS1999

Preview of the BATSE Earth Occultation Catalog of Low Energy Gamma Ray Sources

The Burst and Transient Source Experiment (BATSE) aboard the Compton Gamma Ray Observatory (CGRO) has been detecting and monitoring point sources in the high energy sky since 1991. Although BATSE is best known for gamma ray bursts, it also monitors the sky for longer-lived sources of radiation. Using the Earth occultation technique to extract flux information, a catalog is being prepared of about 150 sources potential emission in the large area detectors (20-1000 keV). The catalog will contain light curves, representative spectra, and parametric data for black hole and neutron star binaries, active galaxies, and super-nova remnants. In this preview, we present light curves for persistent and transient sources, and also show examples of what type of information can be obtained from the BATSE Earth occultation database. Options for making the data easily accessible as an "on line" WWW document are being explored.

Harmon, B. A.↗
NASA NTRS2023

AI-3000K Infrared Line List for Hot CO 2

AI-3000K is a semi-empirical IR line list constructed for hot CO 2 spectra analysis and simulation up to 3000 – 4000 K. Compared to previously published Ames-1000K and UCL-4000, it represents a major upgrade, utilizing a new algorithm for optimization and including the latest improvements in potential energy surface (PES), dipole moment surface (DMS), and room temperature IR line list (Ames-2021 296K). To maximize the success of introducing experimental based accurate line positions, a new PES (X01d) was refined with respect to >800 selected CDSD2019 [Tashkun et al. JQSRT (2019) 228, 124] energy levels in the range of 0 – 24,000 cm -1 , with σ rms = 0.5 – 0.7 cm -1 . Most differences between the X01d PES based levels and CDSD2019 energies are within ± 2 cm -1 . A new DMS is fitted from extrapolated CCSD(T)/aug-cc-pV(T,Q,5)Z dipole calculations, with σ rms = 5.1 × 10 -6 au for 11,155 geometries up to 40,000 cm -1 , denoted Ames-2021–40K. Compared to the best available Ames-2021 DMS and room temperature IR line list [Huang et al J. Phys. Chem. A (2022) 126, 5940], the relative intensity differences are expected to be ∼ 1 ‰. The line position accuracy of ''X01d + Ames-2021–40K'' IR line list is significantly improved by adopting CDSD2019 energy levels up to 24,000 cm -1 (J ≤ 150). The Einstein A21 coefficients for E' < 15,000 cm -1 transitions are replaced by more accurate values from the Ames-2021 296K IR line list. In short, the AI-3000K is the X01d PES and Ames-2021–40K DMS based line list enhanced with the A 21 of Ames-2021 296K line list and CDSD energy levels. It provides continuous coverage from 0 to 20,000 cm -1 for the four most abundant isotopologues: 12 C 16 O 2 (626), 13 C 16 O 2 (636), 16 O 12 C 18 O (628), and 16 O 12 C 17 O (627). The impacts of isotopologue and E'/E'' cutoffs have been examined. Intensity convergence (not accuracy) of AI-3000K line list is quantitatively estimated in 1 cm -1 bins. It is better than 99% in the whole range of 0 – 20,000 (or 10,000) cm -1 at 1000 K (or 2000 K), or better than 90% in the whole range of 0 – 15,000 (or 9000) cm -1 at 2000 K (or 3000 K), respectively. Convergence beyond 3000 K will require a new PES and DMS for E' > 40,000 cm -1 . The AI-3000K and HITEMP based IR simulations are compared to high resolution shock tube experiments for CO 2 -Ar mixture up to 2000 K. With line position accuracy comparable to that of HITEMP, AI-3000K IR line list yields better agreements at more frequencies. Potential sources of discrepancies with experiment are discussed.

AI-3000K↗
NASA NTRS1978

NASTRAN implementation of an isoparametric doubly-curved quadrilateral shell element

A quadrilateral shell element, CQUAD4, was added to level 15.5 and subsequently to level 16.0 of NASTRAN. The element exhibited doubly curved surfaces and used biquadratic interpolation functions. Reduced integration techniques were used to improve the performance of the element in thin shell problems. The creation of several new bulk data items is discussed, along with a special module, GPNORM, to process SHLNORM bulk data cards. In addition to the theoretical basis for the element stiffness matrix, consistent mass and load matrices are presented. Several potential sources of degenerate behavior of the element were investigated. Guidelines for proper use of the element were suggested. Performance of the element on several widely published classical examples was demonstrated. The results showed a significant improvement over presently available NASTRAN shell elements for even the coarsest meshes. Potential applications to two classes of practical problems are discussed.

Potvin, A. B.↗
DOE OSTI2025

Neutrino-portal dark matter detection prospects at a future muon collider

With no concrete evidence for nongravitational interactions of dark matter to date, it is natural to wonder whether dark matter couples predominantly to the Standard Model (SM)’s neutrinos. Neutrino interactions (and the possible existence of additional neutrinophilic mediators) are substantially less understood than those of other SM particles, yet this picture will change dramatically in the coming decades with new neutrino sources. One potential new source arises with the construction of a high-energy muon collider (MuCol); due to muons’ instability, a MuCol is a source of high-energy collimated neutrinos. Importantly, since the physics of muon decays (into neutrinos) is very well-understood, this leads to a neutrino flux with systematic uncertainties far smaller than fluxes from conventional high-energy (proton-sourced) neutrino beams. In this work, we study the capabilities of a potential neutrino detector, “ MuCol ν ”, placed ∼ 100 m downstream of the MuCol interaction point. The MuCol ν detector would be especially capable of searching for a neutrinophilic mediator ϕ through the mononeutrino scattering process ν μ N → μ + ϕ X , exceeding searches from other terrestrial approaches for m ϕ in the ∼ few MeV- ten GeV range. Even with a 10 kg-yr exposure, MuCol ν is capable of searching for well-motivated classes of thermal freeze-out and freeze-in neutrino-portal dark matter. Published by the American Physical Society 2025

Adhikary, Jyotismita (ORCID:0000000253894170)↗
NASA NTRS2006

Determination of Silicon in Hydrazine

Inductively coupled plasma-mass spectrometry (ICP-MS) is a highly sensitive technique sometimes used for the trace determination of silicon at a mass-to-charge (m/z) ratio of 28, the most abundant natural isotope of silicon. Unfortunately, ICP-MS is unable to differentiate between other sources of m/z 28 and false positive results for silicon will result when other sources of m/z 28 are present. Nitrogen was a major source of m/z 28 and contributes to the m/z 28 signal when hydrazine sample or nitric acid preservative is introduced into the plasma. Accordingly, this work was performed to develop a sample preparation step coupled with an ICP-MS analysis that minimized non-silicon sources of m/z 28. In the preparatory step of this method, the hydrazine sample was first decomposed predominately to nitrogen gas and water with copper-catalyzed hydrogen peroxide. In the analysis step, ICP-MS was used without nitric acid preservative in samples or standards. Glass, a potential source of silicon contamination, was also avoided where possible. The method was sensitive, accurate, and reliable for the determination of silicon in monopropellant grade hydrazine (MPH) in AF-E-332 elastomer leaching tests. Results for silicon in MPH were comparable to those reported in the literature for other studies.

McClure, Mark B.↗
NASA NTRS2011

An Accuracy Assessment of the CALIOP/CALIPSO Version 2/Version 3 Daytime Aerosol Extinction Product Based on a Detailed Multi-Sensor, Multi-Platform Case Study

The Cloud Aerosol LIdar with Orthogonal Polarization (CALIOP), on board the CALIPSO platform, has measured profiles of total attenuated backscatter coefficient (level 1 products) since June 2006. CALIOP s level 2 products, such as the aerosol backscatter and extinction coefficient profiles, are retrieved using a complex succession of automated algorithms. The goal of this study is to help identify potential shortcomings in the CALIOP version 2 level 2 aerosol extinction product and to illustrate some of the motivation for the changes that have been introduced in the next version of CALIOP data (version 3, released in June 2010). To help illustrate the potential factors contributing to the uncertainty of the CALIOP aerosol extinction retrieval, we focus on a one-day, multi-instrument, multiplatform comparison study during the CALIPSO and Twilight Zone (CATZ) validation campaign on 4 August 2007. On that day, we observe a consistency in the Aerosol Optical Depth (AOD) values recorded by four different instruments (i.e. spaceborne MODerate Imaging Spectroradiometer, MODIS: 0.67 and POLarization and Directionality of Earth s Reflectances, POLDER: 0.58, airborne High Spectral Resolution Lidar, HSRL: 0.52 and ground-based AErosol RObotic NETwork, AERONET: 0.48 to 0.73) while CALIOP AOD is a factor of two lower (0.32 at 532 nm). This case study illustrates the following potential sources of uncertainty in the CALIOP AOD: (i) CALIOP s low signal-to-noise ratio (SNR) leading to the misclassification and/or lack of aerosol layer identification, especially close to the Earth s surface; (ii) the cloud contamination of CALIOP version 2 aerosol backscatter and extinction profiles; (iii) potentially erroneous assumptions of the aerosol extinction-to-backscatter ratio (Sa) used in CALIOP s extinction retrievals; and (iv) calibration coefficient biases in the CALIOP daytime attenuated backscatter coefficient profiles. The use of version 3 CALIOP extinction retrieval for our case study seems to partially fix factor (i) although the aerosol retrieved by CALIOP is still somewhat lower than the profile measured by HSRL; the cloud contamination (ii) appears to be corrected; no particular change is apparent in the observation-based CALIOP Sa value (iii). Our case study also showed very little difference in version 2 and version 3 CALIOP attenuated backscatter coefficient profiles, illustrating a minor change in the calibration scheme (iv).

Kacenelenbogen, M.↗
DOE OSTI2022

Magnetic pair distribution function data using polarized neutrons and ad hoc corrections

Here, we report the first example of magnetic pair distribution function (mPDF) data obtained through the use of neutron polarization analysis. Using the antiferromagnetic semiconductor MnTe as a test case, we present high-quality mPDF data collected on the HYSPEC instrument at the Spallation Neutron Source using longitudinal polarization analysis to isolate the magnetic scattering cross section. Clean mPDF patterns are obtained for MnTe in both the magnetically ordered state and the correlated paramagnet state, where only short-range magnetic order is present. We also demonstrate significant improvement in the quality of high-resolution mPDF data through the application of ad hoc corrections that require only minimal human input, minimizing potential sources of error in the data processing procedure. We briefly discuss the current limitations and future outlook of mPDF analysis using polarized neutrons. Overall, this work provides a useful benchmark for mPDF analysis using polarized neutrons and provides an encouraging picture of the potential for routine collection of high-quality mPDF data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

The Marginal Ice Zone as a dominant source region of atmospheric mercury during central Arctic summertime

Atmospheric gaseous elemental mercury (GEM) concentrations in the Arctic exhibit a clear summertime maximum, while the origin of this peak is still a matter of debate in the community. Based on summertime observations during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition and a modeling approach, we further investigate the sources of atmospheric Hg in the central Arctic. Simulations with a generalized additive model (GAM) show that long-range transport of anthropogenic and terrestrial Hg from lower latitudes is a minor contribution (~2%), and more than 50% of the explained GEM variability is caused by oceanic evasion. A potential source contribution function (PSCF) analysis further shows that oceanic evasion is not significant throughout the ice-covered central Arctic Ocean but mainly occurs in the Marginal Ice Zone (MIZ) due to the specific environmental conditions in that region. Our results suggest that this regional process could be the leading contributor to the observed summertime GEM maximum. In the context of rapid Arctic warming and the observed increase in width of the MIZ, oceanic Hg evasion may become more significant and strengthen the role of the central Arctic Ocean as a summertime source of atmospheric Hg.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Diffuse sources, clustering, and the excess anisotropy of the radio synchrotron background

ABSTRACT We present the largest low frequency (120 MHz) arcminute resolution image of the radio synchrotron background (RSB) to date, and its corresponding angular power spectrum of anisotropies (APS) with angular scales ranging from 3° to 0.3 arcmin. We show that the RSB around the north celestial pole has a significant excess anisotropy power at all scales over a model of unclustered point sources based on source counts of known source classes. This anisotropy excess, which does not seem attributable to the diffuse Galactic emission, could be linked to the surface brightness excess of the RSB. To better understand the information contained within the measured APS, we model the RSB varying the brightness distribution, size, and angular clustering of potential sources. We show that the observed APS could be produced by a population of faint clustered point sources only if the clustering is extreme and the size of the Gaussian clusters is ≲1 arcmin. We also show that the observed APS could be produced by a population of faint diffuse sources with sizes ≲1 arcmin, and this is supported by features present in our image. Both of these cases would also cause an associated surface brightness excess. These classes of sources are in a parameter space not well probed by even the deepest radio surveys to date.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Inverse aqueous transport modeling for emergency response

ALGE is a three-dimensional, finite-difference aqueous transport model that simulates pollutant fate and transport in lakes, rivers, bays, and estuaries by solving the prognostic equations of mass, momentum, and energy. Its current modeling capabilities include transport of dissolved tracer for a series of predefined basins across the continental United States. Recently, an inverse method (also known as backtracking) has been added to ALGE to provide a possible source of a pollutant should one be detected by a sensor in a body of water and a source is not known. This inverse method is a three step process that uses an algorithm to inverse the flow. We demonstrate the new model’s capabilities through simulating the 2021 Piney Point spill in Tampa Bay, Florida (USA). This involves moving tracer backwards from its detection points, encompassing a potential source area, and applying Bayes’ Theorem and $\frac{𝜒}{𝑄}$ to reduce the area within which the true source could be located.

hydrological modeling↗
NASA NTRS1984

Crystal nucleation and glass formation in metallic alloy melts

Homogeneous nucleation, containerless solidification, and bulk formation of metallic glasses are discussed. Homogeneous nucleation is not a limiting factor for metallic glass formation at slow cooling rates if the reduced glass transition temperature is high enough. Such glasses can be made in bulk if heterogeneous nucleants are removed. Containerless processing eleminates potential sources of nucleants, but as drop tube experiments on the Pd-Si alloys show, the free surface may still be a very effective heterogeneous nucleant. Combination of etching and heating in vacuum or fluxing can be effective for cleaning fairly large ingots of nucleants. Reduced gravity processing has a potentially useful role in the fluxing technique, for example to keep large metallic ingots surrounded by a low density, low fluidity flux if this proved difficult under ground conditions. For systems where heterogeneous nucleants in the bulk of the ingot need gravity to segregate to the flux-metal interface, reduced gravity processing may not be appropriate for bulk glass formation.

Spaepen, F.↗
NASA NTRS2012

Curved Waveguide Based Nuclear Fission for Small, Lightweight Reactors

The focus of the presented work is on the creation of a system of grazing incidence, supermirror waveguides for the capture and reuse of fission sourced neutrons. Within research reactors, neutron guides are a well known tool for directing neutrons from the confined and hazardous central core to a more accessible testing or measurement location. Typical neutron guides have rectangular, hollow cross sections, which are crafted as thin, mirrored waveguides plated with metal (commonly nickel). Under glancing angles with incoming neutrons, these waveguides can achieve nearly lossless transport of neutrons to distant instruments. Furthermore, recent developments have created supermirror surfaces which can accommodate neutron grazing angles up to four times as steep as nickel. A completed system will form an enclosing ring or spherical resonator system to a coupled neutron source for the purpose of capturing and reusing free neutrons to sustain and/or accelerate fission. While grazing incidence mirrors are a known method of directing and safely using neutrons, no method has been disclosed for capture and reuse of neutrons or sustainment of fission using a circular waveguide structure. The presented work is in the process of fabricating a functional, highly curved, neutron supermirror using known methods of Ni-Ti layering capable of achieving incident reflection angles up to four times steeper than nickel alone. Parallel work is analytically investigating future geometries, mirror compositions, and sources for enabling sustained fission with applicability to the propulsion and energy goals of NASA and other agencies. Should research into this concept prove feasible, it would lead to development of a high energy density, low mass power source potentially capable of sustaining fission with a fraction of the standard critical mass for a given material and a broadening of feasible materials due to reduced rates of release, absorption, and non-fission for neutrons. This advance could be applied to direct propulsion through guided fission products or as a secondary energy source for high impulse electric propulsion. It would help meet national needs for highly efficient energy sources with limited dependence on fossil fuels or conflict materials, and it would improve the use of low grade fissile materials which would help reduce national stockpiles and waste.

Coker, Robert↗
NASA NTRS1994

Formation of Na-containing molecular ions at Io

Fast sodium atoms, which appear to be associated with the motion of the magnetic 'field lines' downstream from Io (Schneider et al. 1991), are thought to be produced by dissociation of NaX(+) in Io's plasma torus. It was suggested that these molecular ions are formed near Io's exobase by electron-impact ionization and picked up be the corotating filed lines (Wilson and Schneider 1994). Because electron cooling processes dominate electron-impact ionization in Io's corona, two reactions are suggested here as sources of NaX(+) and, hence, as the ultimate sources of the observed fast Na. First, the charge-exchange cross sections for forming NaX(+) are shown to be large for plasma torus ions (O(+), S(+), O(2+), S(3+)) colliding with NaX molecules in Io's corona. Sputtering from the surface (Chrisey et al. 1988) and rapid transport to the exobase is a potential source of NaX, where X is O,S, Na, or a molecular species such as NaS or O2. Second ions of the more abundant molecules (e.g., SO(+), SO2(+), O2(+), and S2(+)) can react efficiently with atomic Na in Io's corona to form NaX(+). Here cross sections are estimated for these two processes, as well as for charge exchange in O(+) and S(+) on Na collisions.

Johnson, R. E.↗