Search NASA⌕ Search

SEARCH · Search NASA

Results for “transport control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

United States Navy - Canadian forces solid state flight data recorder/crash position locator experiment on the B-720 controlled impact demonstration

The operation of a radio beacon position locator during and after the remotely controlled transport aircraft is discussed. The radio beacon transmission was actuated and was picked up by the Navy P-3A chase aircraft for a short time, after which reception was lost. The pilot reported that he received a signal on both 121.5 MHz and 243 MHz for a period of approximately 5 seconds. Five minutes after the crash a portable direction finding unit located on the roof of the NASA Dryden Flight Research Facility, 4 miles distant from the crash, was unable to pick up the beacon transmission. The fire crews started fighting the fires approximately 90 seconds after the time of impact. Navy personnel access to the crash site was allowed on the morning of December 2, 1984. Radio beacon locator was found resting top side up, 15 feet forward and 13 feet perpendicular from the tray location the starboard side of the aircraft. An immediate inspection indicated the airfoil suffered moderate fire damage with paint peeling but not intumescing. The visual marker strobe lamp housings were intact but extensively burned such that it was impossible to see if the lamps had survived. The airfoil suffered minor structural damage, with assorted dents, etc. The extended plunger on the ARU-21 release unit indicated that the pyrotechnic deployment system operated. The radio beacon base (tray) suffered some heat and fire damage, and was charred and blackened by smoke. The frangible switch in the nose survived and the switch in the belly was recovered and found to have actuated. It is assumed that this switch fired the ARU-21 squib. There were no other release switches installed in the normally open system in the aircraft.

Watters, D. M.↗
NASA NTRS1986

CID-720 aircraft high-environment flight instrumentation system

The high-environment flight instrumentation system was designed to acquire Langley's structural response data during the full scale transport-controlled impact demonstration test. There was only one opportunity for data acquisition. Thus, a high reliability and crashworthy design approach was implemented. The approach featured multi-level redundancy and a vigorous quality assurance testing program. Complying with an accelerated schedule, the instrumentation system was developed, tested and shipped within 18 months to Dryden Flight Research Facility. The flight instrumentation system consists of two autonomous data systems, DAS #1 and #2, and an excellent checkout subsystem. Each data system is partitioned into four pallets. The system was designed to operate on manned and unmanned flights. There are 176 data channels per data system. These channels are sequentially sampled and encoded into 1 megabit/sec pulse code modulation (PCM) data signal. To increase the probability of success, a special PCM distribution subsystem was developed. This subsystem distributes the PCM signal to two transmitters, one delay memory, and eight recorder tracks. The data on four of these trackes was digitally delayed approximately 300 msec to maximize data acquisition during impact. Therefore each data system's data is redundantly recorded onboard and on the ground. There are two time code generators. Parallel time from each is encoded into both data systems. Serial time from each is redundantly recorded on both onboard recorders. Instrumentation power is independent of aircraft power and self-contained.

Calloway, R. S.↗
NASA NTRS1987

Antimisting kerosene JT3 engine fuel system integration study

An analytical study and laboratory tests were conducted to assist NASA in determining the safety and mission suitability of the modified fuel system and flight tests for the Full-Scale Transport Controlled Impact Demonstration (CID) program. This twelve-month study reviewed and analyzed both the use of antimisting kerosene (AMK) fuel and the incorporation of a fuel degrader on the operational and performance characteristics of the engines tested. Potential deficiencies and/or failures were identified and approaches to accommodate these deficiencies were recommended to NASA Ames -Dryden Flight Research Facility. The result of flow characterization tests on degraded AMK fuel samples indicated levels of degradation satisfactory for the planned missions of the B-720 aircraft. The operability and performance with the AMK in a ground test engine and in the aircraft engines during the test flights were comparable to those with unmodified Jet A. For the final CID test, the JT-3C-7 engines performed satisfactorily while operating on AMK right up to impact.

Fiorentino, A.↗
NASA NTRS1989

Intrinsic fatigue crack propagation in aluminum-lithium alloys - The effect of gaseous environments

Gaseous environmental effects on intrinsic fatigue crack growth are significant for the Al-Li-Cu alloy 2090, peak aged. For both moderate Delta K-low R and low Delta K-high R regimes, crack growth rates decrease according to the environment order: purified water vapor, moist air, helium and oxygen. Gaseous environmental effects are pronounced near threshold and are not closure dominated. Here, embrittlement by low levels of H2O (ppm) supports hydrogen embrittlement and suggests that molecular transport controlled cracking, established for high Delta K-low R, is modified near threshold. Localized crack tip reaction sites or high R crack opening shape may enable the strong, environmental effect at low levels of Delta K. Similar crack growth in He and O2 eliminates the contribution of surface films to fatigue damage in alloy 2090. While 2090 and 7075 exhibit similar environmental trends, the Al-Li-Cu alloy is more resistant to intrinsic corrosion fatigue crack growth.

Piascik, Robert S.↗
NASA NTRS1991

High-speed, cross-continental networks - A necessity

The networking requirements that the Earth Observing System (EOS) program has levied on NASA and the national and international operational networking communities is addressed. The objectives of the EOS program are listed and include the development and operation of an observing system to acquire essential, global earth science data on a long-term, sustained basis and in a manner which maximizes the scientific utility of the data and simplifies data analysis. Network design issues are also discussed, including protocol selection, the Transport Control Protocol/Internet Protocol suite, the Open Systems Interconnect network suite, and the internet evolution. Open and closed network issues are also discussed. A number of networks now in place are assessed including NASNet, and ESNet. These offer possible options and/or solutions to be considered by the NASA Headquarters EOS Data and Information Systems Program.

Wong, C. M.↗
NASA NTRS1993

Carbonate compositions in CM and CI chondrites, and implications for aqueous alteration

Carbonate minerals in fourteen CM chondrites and two CI chondrites have been analyzed by electron microprobe to provide a better understanding of the aqueous processes that affected carbonaceous chondrite parent bodies. Calcites in CM chondrites and dolomites and magnesites in CI chondrites display the compositions expected of stable phases formed at low temperatures. Dolomites in CM chondrites, identified here for the first time in five members of the group, have small amounts of excess Ca which may reflect metastable growth. The distribution of Fe between dolomite and coexisting serpentine differs in the two chondrite groups. If the distributions reflect an approach to chemical equilibrium, then the difference implies higher alteration temperatures for the CI group than the CM group in agreement with the results of previously published oxygen isotope thermometry and mineral solubility modeling of the alteration process. Dolomite Fe contents are relatively uniform in the two chondrite groups. Dolomite Mn contents, by contrast, vary widely. The variations may reflect transport-controlled coprecipitation of Mn resulting from a heterogeneous distribution of the element in the anhydrous precursor material. If this interpretation is correct, then the altering fluids were essentially immobile white hydration reactions proceeded on the meteorite parent bodies. The near closed-system character of the alteration process, long known from bulk chemical analyses of the meteorites, is a direct consequence of the limited mobility of dissolved species.

Johnson, Craig A.↗
NASA NTRS1992

Solar-wind/magnetospheric dynamos: MHD-scale collective entry of the solar wind energy, momentum and mass into the magnetosphere

A quasi open MHD (Magnetohydrodynamic) scale anomalous transport controlled boundary layer model is proposed, where the MHD collective behavior of magnetofluids (direct dynamo effect, anomalous viscous interaction and anomalous diffusion of the mass and the magnetic field) plays the main role in the conversion of the Solar Wind (SW) kinetic and magnetic energy into electromagnetic energy in the Magnetosphere (MSp). The so called direct and indirect dynamo effects are based on inductive and purely dissipative energy conversion, respectively. The self organization ability of vector fields in turbulent magnetofluids implies an inductive response of the plasma, which leads to the direct dynamo effect. The direct dynamo effect describes the direct formation of localized field aligned currents and the transverse Alfven waves and provides a source for MHD scale anomalous diffusivity and viscosity. The SW/MSp coupling depends on the dynamo efficiency.

Song, Yan↗
NASA NTRS2001

Simulation of the Effect of Realistic Space Vehicle Environments on Binary Metal Alloys

Simulations that assess the effect of space vehicle acceleration environments on the solidification of Pb-Sb alloys are reported. Space microgravity missions are designed to provide a near zero-g acceleration environment for various types of scientific experiments. Realistically. these space missions cannot provide a perfect environment. Vibrations caused by crew activity, on-board experiments, support systems stems (pumps, fans, etc.), periodic orbital maneuvers, and water dumps can all cause perturbations to the microgravity environment. In addition, the drag on the space vehicle is a source of acceleration. Therefore, it is necessary to predict the impact of these vibration-perturbations and the steady-state drag acceleration on the experiments. These predictions can be used to design mission timelines. so that the experiment is run during times that the impact of the acceleration environment is acceptable for the experiment of interest. The simulations reported herein were conducted using a finite element model that includes mass, species, momentum, and energy conservation. This model predicts the existence of "channels" within the processing mushy zone and subsequently "freckles" within the fully processed solid, which are the effects of thermosolutal convection. It is necessary to mitigate thermosolutal convection during space experiments of metal alloys, in order to study and characterize diffusion-controlled transport phenomena (microsegregation) that are normally coupled with macrosegregation. The model allows simulation of steady-state and transient acceleration values ranging from no acceleration (0 g). to microgravity conditions (10(exp -6) to 10(exp -3) g), to terrestrial gravity conditions (1 g). The transient acceleration environments simulated were from the STS-89 SpaceHAB mission and from the STS-94 SpaceLAB mission. with on-orbit accelerometer data during different mission periods used as inputs for the simulation model. Periods of crew exercise, quiet (no crew activity), and nominal conditions from STS-89 were used as simulation inputs as were periods of nominal. overboard water-dump, and free-drift (no orbit maneuvering operations) from STS-94. Steady-state acceleration environments of 0.0 and 10(exp -6) to 10(exp -1) g were also simulated, to serve as a comparison to the transient data and to assess an acceptable magnitude for the steady-state vehicle drag

Westra, Douglas G.↗
NASA NTRS2004

Protocol Support for a New Satellite-Based Airspace Communication Network

We recommend suitable transport protocols for an aeronautical network supporting Internet and data services via satellite. We study the characteristics of an aeronautical satellite hybrid network and focus on the problems that cause dramatically degraded performance of the Transport Protocol. We discuss various extensions to standard TCP that alleviate some of these performance problems. Through simulation, we identify those TCP implementations that can be expected to perform well. Based on the observation that it is difficult for an end-to-end solution to solve these problems effectively, we propose a new TCP-splitting protocol, termed Aeronautical Transport Control Protocol (AeroTCP). The main idea of this protocol is to use a fixed window for flow control and one duplicated acknowledgement (ACK) for fast recovery. Our simulation results show that AeroTCP can maintain higher utilization for the satellite link than end-to-end TCP, especially in high BER environment.

Shang, Yadong↗
NASA NTRS2004

SCPS-TP: A Satellite-Enhanced TCP

This viewgraph presentation reviews the Space Communications Protocol Standard Transport Protocol (SCPS-TP) which is a satellite enhanced Transport Control Protocol (TCP). The contents include: 1) Purpose; 2) Background; 3) Stressed Communication Environments; 4) SCPS-TP Features; 5) SCPS-TP Performance; 6) Performance Enhancing Proxies (PEPs); and 7) Ongoing and Future SCPS-TP Work.

transmission control protocol(TCP)↗
NASA NTRSDate not supplied

Secondary Volcanically-Induced Lunar Atmosphere and Lunar Volatiles: 3-D Modeling and Analysis

The fact that the Moon could have a transient secondary atmosphere due to volcanic outgassing has been known for some time, though typically such an atmosphere was believed to be extremely thin (~10-8 bar) [1]. But recent research by Needham and Kring (NK) [2] suggests that during the peak of volcanic activity ~3.5 Ga such a volcanically-outgassed atmosphere could reach ~10-2 bar of surface pressure. In similar research Wilson et al. [3] proposed a more conservative estimate, arguing that the thickness of such an atmosphere would depend on the intervals between major eruptions and may not exceed microbar densities. In either case a collisional atmosphere could be present, which would control transport of outgassed volatiles (such as H2O) and their deposition in polar regions, where they could be preserved until modern day frozen in permanently shadowed regions (PSR) or buried beneath the regolith. Here we study such a hypothetical atmosphere to investigate its stability, meteorological properties and the effect on transport of volatiles. We use the ROCKE-3D planetary 3-D General Circulation Model (GCM)[4]. The insolation and orbital parameters were set to conditions 3.5 Ga. The atmospheric composition, based on the list of outgassed species presented by NK in combination with our estimates for atmospheric escape, condensation and the results from our 1-D chemistry model, was chosen to be either CO-dominated or CO2-dominated (depending on atmospheric temperature). In this study we restricted ourselves to relatively "thick" lunar atmospheres of 1-10 mb, though we believe that our results will scale to thinner atmospheres as well. We present the results for ground and atmospheric temperature for modeled atmospheres over a wide parameter space. In particular we consider different atmospheric compositions (CO or CO2 dominated), a set of atmospheric pressures from 1 mb to 10 mb and a set of obliquities from 0o to 40o. We also present an experiment of a single major eruption [5] and show that in just 3 years ~80% of the outgassed water is deposited in polar regions. This demonstrates the efficiency of such an atmosphere in delivering volatiles. We argue that a secondary lunar atmosphere could play a significant role in forming volatile deposits currently observed in the polar regions of the Moon.

Lunar atmospheres↗
DOE OSTI2021

Doped gate dielectric materials

A field effect transistor having at least a gate, source, and drain electrodes and a semiconductor channel for controlling transport of charge carriers between the source and drain electrodes, the gate being insulated from the channel by an dielectric, at least a portion of the dielectric disposed between the gate electrode and the semiconductor channel being doped or imbued with the an element which if doped or imbued into a semiconductor material would cause the semiconductor to be p-type. The p-type element used to dope or imbue the gate dielectric is preferably Mg.

Cao, Yu↗
DOE OSTI2022

Doped gate dielectrics materials

A field effect transistor having at least a gate, source, and drain electrodes and a semiconductor channel for controlling transport of charge carriers between the source and drain electrodes, the gate being insulated from the channel by an dielectric, at least a portion of the dielectric disposed between the gate electrode and the semiconductor channel being doped or imbued with the an element which if doped or imbued into a semiconductor material would cause the semiconductor to be p-type. The p-type element used to dope or imbue the gate dielectric is preferably Mg.

Cao, Yu↗
NASA NTRS1980

Impact of longitudinal flying qualities upon the design of a transport with active controls

Direct constrained parameter optimization was used to optimally size a medium range transport for minimum direct operating cost. Several stability and control constraints were varied to study the sensitivity of the configuration to specifying the unaugmented flying qualities of transports designed with relaxed static stability. Additionally, a number of handling quality related design constants were studied with respect to their impact to the design.

Sliwa, S. M.↗
DOE OSTI2025

Control of Energy Transport and Transduction in Photosynthetic Down-Conversion (Final Technical Report)

The research conducted under this contract focused on three areas related to control of energy transport and transduction in natural and synthetic light harvesting systems: (1) experimental and theoretical studies exploring the use of ultrafast laser pulse shaping to manipulate the initially excited states of multi-chromophore biological light harvesting networks and influence the early time energy transfer and electronic and vibrational relaxation pathways, (2) fundamental theoretical developments aimed at computing and analyzing the dynamics of excitations of complex heterogeneous environments and nano structures, and (3) joint experimental and theoretical design studies of artificial light harvesting materials exploring the influence of incorporating different types of organic layers in low dimensional lead halide perovskite materials on their hot carrier relaxation dynamics, and theoretical studies of the design of nano structured light harvesting antenna systems. These research projects supported the training of three theoretical and computational graduate students, one experimental graduate student, and one experimental post-doctoral researcher. The research has been published in seven peer reviewed papers and presented at several international meetings and workshops.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Design considerations for application of laminar flow control systems to transport aircraft

The current status of the laminar-flow control LFC technology is summarized. Factors that have previously inhibited the application of LFC are first reviewed. Involved are the effects of atmospheric ice crystals, surface irregularities, acoustical environment, and off-design operating conditions. Aircraft design trends that are different from turbulent aircraft are discussed as are various design requirements unique to the LFC systems. Current design approaches for the principal LFC systems are reviewed. These include the system for protection of the leading-edge region from surface contamination and icing and the system for removal of a portion of the boundary-layer air. The latter includes consideration of both multiple spanwise suction slots and distributed perforations and required differences between the wing-box and leading-edge box regions.

Braslow, A. L.↗
NASA NTRS1984

Effects of Transport Delays of Manual Control System Performance

Throughput or transport delays in manual control systems can cause degraded performance and lead to potentially unstable operation. With the expanding use of digital processors, throughput delays can occur in manual control systems in a variety of ways such as in digital flight control systems in real aircraft, and in equation of motion computers and computer generated images in simulators. Research has shown the degrading effect of throughput delays on subjective opinion and system performance and dynamic response. A generic manual control system model is used to provide a relatively simple analysis of and explanation for the effects of various types of delays. The consequence of throughput delays of some simple system architectures is also discussed.

Allen, R. W.↗