Search NASA⌕ Search

SEARCH · Search NASA

Results for “Memory device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Physical implication of transition voltage in organic nano-floating-gate nonvolatile memories

High-performance pentacene-based organic field-effect transistor nonvolatile memories, using polystyrene as a tunneling dielectric and Au nanoparticles as a nano-floating-gate, show parallelogram-like transfer characteristics with a featured transition point. The transition voltage at the transition point corresponds to a threshold electric field in the tunneling dielectric, over which stored electrons in the nano-floating-gate will start to leak out. The transition voltage can be modulated depending on the bias configuration and device structure. For p-type active layers, optimized transition voltage should be on the negative side of but close to the reading voltage, which can simultaneously achieve a high ON/OFF ratio and good memory retention.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design, processing, and testing of LSI arrays for space station

At wafer probe, units of the TA6567 circuit, a beam leaded COS/MOS/SOS 256-bit RAM, were demonstrated to be functionally perfect. An aluminum gate current-sense version and a silicon-gate voltage-sense version of this memory were developed. Initial base line data for the beam lead SOS process using the TA5388 circuit show the stability of the dc device characteristics through the beam lead processing.

Schneider, W. C.↗

Deployment Mechanism for the Space Technology 5 Micro Satellite

Space Technology 5 (ST5) is a technology mission that will send three spin-stabilized, 25-kg satellites into a highly elliptical Earth orbit. Each of these satellites must be deployed separately from the same launch vehicle with a spin rate of 3.4 rads (32.4 rpm). Because of the satellite's small size and the requirement to achieve its mission spin rate on deploy, typical spin table, pyrotechnic deployment devices or spin up thrusters could not be used. Instead, this new mechanism design employs a "Frisbee" spin up strategy with a shape memory alloy actuated Pinpuller to deploy each satellite. The mechanism has undergone several design and test iterations and has been successfully qualified for flight.

Rossoni, Peter↗

Deployment Mechanism for the Space Technology 5 Micro Satellite

Space Technology 5 (ST5) is a technology mission that will send three spin-stabilized, 25-kg satellites into a highly elliptical Earth orbit. Each of these satellites must be deployed separately from the same launch vehicle with a spin rate of 3.4 rad/s (32.4 rpm). Because of the satellite's small size and the requirement to achieve its mission spin rate on deploy, typical spin table, pyrotechnic deployment devices or spin up thrusters could not be used. Instead, this new mechanism design employs a 'Frisbee' spin up strategy with a shape memory alloy actuated Pinpuller to deploy each satellite. The mechanism has undergone several design and test iterations and has been successfully qualified for flight.

Rossoni, Peter↗

Initial SEE Testing of Maestro

We have reported on initial SEE sensitivity of the full 49-core Maestro device. Supporting the low-level structures and qualitative system observation goals of phase 1 of testing. Observed sensitivities found to be consistent with Boeing predictions. Highlighted by the L1 data cache sensitivity which drives the rates on the current Maestro device. Presented details to the hardware and software setups that show where the limitations - highlighting future work. Key future work includes testing with memory and IO ports.

cache sensitivity↗

Unipolar resistive switching behavior of amorphous YCrO{sub 3} films for nonvolatile memory applications

Amorphous YCrO{sub 3} (YCO) films were prepared on Pt/TiO{sub 2}/SiO{sub 2}/Si substrate by pulsed laser deposition in order to investigate resistive switching (RS) phenomenon. The Pt/YCO/Pt device showed stable unipolar RS with resistance ratio of ∼10{sup 5} between low and high resistance states, excellent endurance and retention characteristics, as well as, non-overlapping switching voltages with narrow dispersions. Based on the x-ray photoelectron spectroscopy and temperature dependent switching characteristics, observed RS was mainly ascribed to the oxygen vacancies. Moreover, current-voltage characteristics of the device in low and high resistance states were described by Ohmic and trap controlled space–charge limited conduction mechanisms, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of ECRAM materials and devices

As the limits of Moore’s Law approaches, new computing paradigms are developing to breakthrough this bottleneck. One such computer architecture is neuromorphic computing, which models the brain. Electrochemical random-access memory (ECRAM) is a low power and energy efficient memory due to characteristics, such as in-memory compute, ion modulation of the channel conductance, and computation distribution with large scale array integration.

97 MATHEMATICS AND COMPUTING↗

Evaluating the Performance of Integer Sum Reduction in SYCL on GPUs

SYCL is a promising programming model for heterogeneous computing—allowing a single-source code to target devices from multiple vendors. One significant task performed on these accelerators is a primitive operation for integer sum reduction. This paper presents several SYCL implementations of integer sum reduction—using atomic functions, shared local memory, vectorized memory accesses and parameterized workload sizes—to compare the performance and maturity of SYCL against open-source vendor-specific implementations of the same reduction. For a sufficiently large number of integers, tuning the parameters of our SYCL implementations achieves 1.4X speedup over the open-source implementations on an Intel UHD630 integrated GPU. The SYCL reduction is 3% faster than the templated reduction in Thrust, and 0.3% faster than the device reduction in CUB on an Nvidia P100 GPU. The SYCL reduction is 1.9% faster than the templated reduction in Thrust, and 0.4% faster than the device reduction in CUB on an Nvidia V100 GPU.

Jin, Zheming↗

Coordination and establishment of centralized facilities and services for the University of Alaska ERTS survey of the Alaskan environment

The author has identified the following significant results. Specifications have been prepared for the engineering design and construction of a digital color display unit which will be used for automatic processing of ERTS data. The color display unit is a disk refresh memory with computer interfaced input and a color cathode ray tube output display. The system features both analog and digital post disk data manipulation and a versatile color coding device suitable for displaying not only images, but also computer generated graphics such as diagrams, maps, and overlays. Input is from IBM compatible 9 track, 800 BPI tapes, as generated by an IBM 360 computer. ERTS digital tapes are read into the 360, where various analyses such as maximum likelihood classification are performed and the results are written on a magnetic tape which is the input to the color display unit. The greatest versatility in the data manipulation area is provided by the minicomputer built into the color display unit, which is off-line from the main 360 computer. The minicomputer is able to read any line from the refresh disk and place it in its 4K-16 bit memory. Considerable flexibility is available for post-processing enhancement of images by the investigator.

Belon, A. E.↗

Device for Temporal Measurement of Loads in Parachute Suspension Systems

In order to understand the distribution of loads in parachutes, the NASA Low Density Supersonic Decelerators (LDSD) project developed a wireless instrument to measure loads in the parachute suspension lines. The load cells are titanium links that are connected in the primary structural load path of the parachute system. Strain gages measure the elongation of the links and an onboard data acquisition system records the data to ash memory. The load cells have onboard power, and include a radio transceiver that is used to receive timing information. The load cells are designed to be interfaced with cordage, packed in a parachute bag, and deployed with a standard parachute deployment. The devices are triggered passively during the deployment of the parachute. Prototype devices with a mass of 100 grams and a load capability of 16,000 lbs were built as a proof of concept.

Brandeau, Erich J.↗

Metallic to hopping conduction transition in Ta{sub 2}O{sub 5−x}/TaO{sub y} resistive switching device

In this Letter, a comprehensive analysis of how the metallic behavior transition to hopping was presented by studying the transport mechanisms of low resistance states (LRS) in Ta{sub 2}O{sub 5−x}/TaO{sub y} resistive switching devices at very low temperatures. Three types of conduction behaviors were reported through temperature-dependent measurements ranging from 5 K to 250 K. Memory cells at low LRS show metallic behavior due to the formation of metallic filament. The temperature dependence of resistance at medium LRS exhibits an interesting phenomenon that a positive temperature coefficient transfers into a negative one at temperature of 20 K. Detailed analysis reveals that this phenomenon is caused by the coexistence of extended and localized states, with metallic conduction at higher temperatures and variable-range hopping at lower temperatures. Carrier transport at high LRS is dominated by electrons hopping conduction with nearest-neighboring hopping conduction changing into variable-range hopping as temperature decreases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Voltage control of unidirectional anisotropy in ferromagnet-multiferroic system

Demonstration of ultralow energy switching mechanisms is imperative for continued improvements in computing devices. Ferroelectric (FE) and multiferroic (MF) order and their manipulation promise an ideal combination of state variables to reach attojoule range for logic and memory (i.e., ~30× lower switching energy than nanoelectronics). In BiFeO 3 (BFO), the coupling between the antiferromagnetic (AFM) and FE order is robust at room temperature, scalable in voltage, stabilized by the FE order, and can be integrated into a fabrication process for a beyond-CMOS (complementary metal-oxide semiconductor) era. The presence of the AFM order and a canted magnetic moment in this system causes exchange interaction with a ferromagnet such as Co 0.9 Fe 0.1 or La 0.7 Sr 0.3 MnO 3 . Previous research has shown that exchange coupling (uniaxial anisotropy) can be controlled with an electric field. However, voltage modulation of unidirectional anisotropy, which is preferred for logic and memory technologies, has not yet been demonstrated. Here, we present evidence for electric field control of exchange bias of laterally scaled spin valves that is exchange coupled to BFO at room temperature. We show that the exchange bias in this bilayer is robust, electrically controlled, and reversible. We anticipate that magnetoelectricity at these scaled dimensions provides a powerful pathway for computing beyond modern nanoelectronics by enabling a new class of nonvolatile, ultralow energy computing elements.

36 MATERIALS SCIENCE↗

tite

The TITE library provides type erasure implementation utilizing the tag_invoke paradigm proposed for standardization here: https://open-std.org/JTC1/SC22/WG21/docs/papers/2019/p1895r0.pdf. The implementation contained herein is largely modeled after that provided in the standardization proposal and available at https://godbolt.org/z/3TvO4f. Significant modification have been made to the original implementation to improve its suitability to be utilized for GPU architectures. In particular the implementation: - only requires a C++14 standard. - has been extended to obtain vtables for GPU device architectures in addition to CPU host architectures. - provides a gpu_allocator class appropriate for allocation of the type-erased object to GPU memory - provides copy semantics omitted from the original implementation-- - generally the copy semantics are to completely copy the type-erased object - when the usage of the type-erased object guarantees immutability the copy semantics are altered to reference-counted shallow copies (copies of pointers) for improved performance

Solomon, CJ↗

Design and fabrication of robust hybrid photonic crystal cavities

Abstract Heterogeneously integrated hybrid photonic crystal cavities enable strong light–matter interactions with solid state, optically addressable quantum memories. A key challenge to realizing high quality factor ( Q ) hybrid photonic crystals is the reduced index contrast on the substrate compared to suspended devices in air. This challenge is particularly acute for color centers in diamond because of diamond’s high refractive index, which leads to increased scattering loss into the substrate. Here, we develop a design methodology for hybrid photonic crystals utilizing a detailed understanding of substrate-mediated loss, which incorporates sensitivity to fabrication errors as a critical parameter. Using this methodology, we design robust, high-Q, GaAs-on-diamond photonic crystal cavities, and by optimizing our fabrication procedure, we experimentally realize cavities with Q approaching 30,000 at a resonance wavelength of 955 nm.

Abulnaga, Alex↗

Low cost omega navigation receiver

The development of a low cost Omega navigation receiver is discussed. Emphasis is placed on the completion and testing of a modular, multipurpose Omega receiver which utilizes a digital memory-aided, phase-locked loop to provide phase measurement data to a variety of applications interfaces. The functional units contained in the prototype device are described. The receiver is capable of receiving and storing phase measurements for up to eight Omega signals and computes two switch-selectable lines of position, displaying this navigation data in chart-recorded form.

Lilley, R. W.↗

A molecular shift register based on electron transfer

An electronic shift-register memory at the molecular level is described. The memory elements are based on a chain of electron-transfer molecules and the information is shifted by photoinduced electron-transfer reactions. This device integrates designed electronic molecules onto a very large scale integrated (silicon microelectronic) substrate, providing an example of a 'molecular electronic device' that could actually be made. The design requirements for such a device and possible synthetic strategies are discussed. Devices along these lines should have lower energy usage and enhanced storage density.

Hopfield, J. J.↗

Molecular Electronic Shift Registers

Molecular-scale shift registers eventually constructed as parts of high-density integrated memory circuits. In principle, variety of organic molecules makes possible large number of different configurations and modes of operation for such shift-register devices. Several classes of devices and implementations in some specific types of molecules proposed. All based on transfer of electrons or holes along chains of repeating molecular units.

Beratan, David N.↗

Autonomous Science Decision Making for Mars Sample Return

In the near future NASA intends to explore Mars in preparation for a sample return mission using robotic devices such as landers, rovers, orbiters, airplanes, and/or balloons. Such platforms will likely carry imaging devices to characterize the surface morphology, and a variety of analytical instruments intended to evaluate the chemical and mineralogical nature of the environment(s) that they encounter. Historically, mission operations have involved the following sequence of activities: (1) return of scientific data from the vehicle; (2) evaluation of the data by space scientists; (3) recommendations of the scientists regarding future mission activity; (4) transmission of commands to the vehicle to achieve this activity; and (5) new activity by the vehicle in response to those commands. This is repeated for the duration of the mission, with command opportunities once or perhaps twice per day. In a rapidly changing environment, such as might be encountered by a rover traversing hundreds of meters a day or an airplane soaring over several hundred of kilometers, this traditional cycle of data evaluation and commands is not amenable to rapid long range traverses, discovery of novelty, or rapid response to any unanticipated situations. In addition, to issues of response time, the nature of imaging and/or spectroscopic devices are such that tremendous data volumes can be acquired, for example during a traverse. These data volumes can rapidly exceed on-board memory capabilities prior to an opportunity to transmit it to Earth.

Roush, Ted L.↗