Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

A system for spacecraft attitude control and energy storage

A conceptual design for a double-gimbal reaction-wheel energy-wheel device which has three-axis attitude control and electrical energy storage capability is given. A mathematical model for the three-axis gyroscope (TAG) was developed, and a system of multiple units is proposed for attitude control and energy storage for a class of spacecraft. Control laws were derived to provide the required attitude-control torques and energy transfer while minimizing functions of TAG gimbal angles, gimbal rates, reaction-wheel speeds, and energy-wheel speed differences. A control law is also presented for a magnetic torquer desaturation system. A computer simulation of a three-TAG system for an orbiting telescope was used to evaluate the concept. The results of the study indicate that all control and power requirements can be satisfied by using the TAG concept.

Shaughnessy, J. D.↗

Apparatus for applying simulator g-forces to an arm of an aircraft simulator pilot

A device to be used with an aircraft simulator to apply positive and negative g forces to the pilot's arm is described. An arm harness fits around the arm which the pilot uses to operate the throttle. The device allows the harness to track intentional arm movements without exerting any restraining forces, and at the same time, applies g forces to to the pilots arm which are recorded by the aircraft simulator computer.

Ashworth, B. R.↗

Analysis of satellite altimeter signal characteristics and investigation of sea-truth data requirements

Results are presented of analysis of satellite signal characteristics as influenced by ocean surface roughness and an investigation of sea truth data requirements. The first subject treated is that of postflight waveform reconstruction for the Skylab S-193 radar altimeter. Sea state estimation accuracies are derived based on analytical and hybrid computer simulation techniques. An analysis of near-normal incidence, microwave backscattering from the ocean's surface is accomplished in order to obtain the minimum sea truth data necessary for good agreement between theoretical and experimental scattering results. Sea state bias is examined from the point of view of designing an experiment which will lead to a resolution of the problem. A discussion is given of some deficiencies which were found in the theory underlying the Stilwell technique for spectral measurements.

Source record↗

The development of a solar powered residential heating and cooling system

A solar energy collector design is disclosed that would be efficient for both energy transfer and fluid flow, based upon extensive parametric analyses. Thermal design requirements are generated for the energy storage systems which utilizes sensible heat storage in water. Properly size system components (including the collector and storage) and a practical, efficient total system configuration are determined by means of computer simulation of system performance.

Oneill, M. J.↗

Continuous and discrete describing function analysis of the LST system

A describing function of the control moment gyros (CMG) frictional nonlinearity is derived using the analytic torque equation. Computer simulation of the simplified Large Space Telescope (LST) system with the analytic torque expression is discussed along with the transfer functions of the sampled-data LST system, and the discrete describing function of the GMC frictionality.

Kuo, B. C.↗

Theoretical study of production of unique glasses in space

Analytical functional relationships describing homogeneous nucleation and crystallization in various supercooled liquids were developed. The time and temperature dependent relationships of nucleation and crystallization (intrinsic properties) are being used to relate glass forming tendency to extrinsic parameters such as cooling rate through computer simulation. Single oxide systems are being studied initially to aid in developing workable kinetic models and to indicate the primary materials parameters affecting glass formation. The theory and analytical expressions developed for simple systems is then extended to complex oxide systems. A thorough understanding of nucleation and crystallization kinetics of glass forming systems provides a priori knowledge of the ability of a given system to form a glass.

Larsen, D. C.↗

Parameter estimation for terrain modeling from gradient data

A method is developed for modeling terrain surfaces for use on an unmanned Martian roving vehicle. The modeling procedure employs a two-step process which uses gradient as well as height data in order to improve the accuracy of the model's gradient. Least square approximation is used in order to stochastically determine the parameters which describe the modeled surface. A complete error analysis of the modeling procedure is included which determines the effect of instrumental measurement errors on the model's accuracy. Computer simulation is used as a means of testing the entire modeling process which includes the acquisition of data points, the two-step modeling process and the error analysis. Finally, to illustrate the procedure, a numerical example is included.

Dangelo, K. R.↗

Identification of structural parameters from helicopter dynamic test data

A method is presented for obtaining the mass, stiffness, and damping parameters of a linear mathematical model, having fewer degrees of freedom than the structure it represents, directly from dynamic response measurements on the actual helicopter without a priori knowledge of the physical characteristics of the fuselage. The only input information required in the formulation is the approximate natural frequency of each mode and mobility data measured proximate to these frequencies with sinusoidal force excitation applied at only one point on the vehicle. The practicality and numerical soundness of the theoretical development was demonstrated through a computer simulation of an experimental program.

Giansante, N.↗

Design study of RL10 derivatives. Volume 2: Engine design characteristics, appendices

Calculations, curves, and substantiating data which support the engine design characteristics of the RL-10 engines are presented. A description of the RL-10 ignition system is provided. The performance calculations of the RL-10 derivative engines and the performance results obtained are reported. The computer simulations used to establish the control system requirements and to define the engine transient characteristics are included.

Source record↗

Research on the thermal history of the moon

Lunar thermal history modelling is used to demonstrate that a realistic computer simulation can be used to predict major and minor element concentrations, thickness of the lunar crust, and intensity of volcanic activity as a function of time. The models which are most consistent with the observations include: (1) a high surface temperature and low interior temperature during the very early lunar history; (2) high near-surface radioactivity and relatively low radioactivity in the interior; and (3) a molten zone formed at or near the surface which gradually migrates downward with time. Lunar magnetic anomaly calculations show that large anomalies measured at some of the landing sites and above some points on the surface cannot be caused by mere basalts but are consistent with valley fillings of Cayley-like material with a remanent magnetization of about 0.0002 emu/gm.

Source record↗

Computer model of cardiovascular control system responses to exercise

Approaches of systems analysis and mathematical modeling together with computer simulation techniques are applied to the cardiovascular system in order to simulate dynamic responses of the system to a range of exercise work loads. A block diagram of the circulatory model is presented, taking into account arterial segments, venous segments, arterio-venous circulation branches, and the heart. A cardiovascular control system model is also discussed together with model test results.

Croston, R. C.↗

Overshoot suppression in Adaptive Delta Modulator links for video transmission

An overshoot suppression scheme to improve the performance of the Digital Song Adaptive Delta Modulator for picture transmission is described. The overshoot suppression algorithm has been verified using computer simulation on a PDP-8. It is also shown that the additional hardware required for the actual implementation of the algorithm is simpler than those encountered in the literature, and gives better signal tracking accuracy.

Weiss, L.↗

Attitude stability of a flexible solar electric spacecraft - A parametric study

The influence of large area solar array flexibility on the attitude control of a solar electric spacecraft is analyzed. The spacecraft consists of a rigid central body, two flexible roll-out solar arrays, and a cluster of three electric propulsion engines. Each engine has gimballing or translational capacity, or both, for attitude control purposes. A parametric stability study of various spacecraft configurations was made, using hybrid coordinate techniques in an eigenvalue analysis. Parameters varied were solar array aspect ratio, solar array first natural frequency, solar array rotation angle about the yaw axis, and sensor gain factors. Only the first six modes of solar array vibration were included in the study. The attitude response characteristics of the various spacecraft configurations were obtained by means of a digital computer simulation program of the system's equations of motion. The feasibility of using the thrusters for attitude control of electric propulsion spacecraft is demonstrated. It is also shown that although the dynamics effects of large-area flexible solar arrays can be harmful, changes in the control system parameters can insure stable attitude control.

Marsh, E. L.↗

Maximum likelihood identification of aircraft stability and control derivatives

Application of a generalized identification method to flight test data analysis. The method is based on the maximum likelihood (ML) criterion and includes output error and equation error methods as special cases. Both the linear and nonlinear models with and without process noise are considered. The flight test data from lateral maneuvers of HL-10 and M2/F3 lifting bodies are processed to determine the lateral stability and control derivatives, instrumentation accuracies, and biases. A comparison is made between the results of the output error method and the ML method for M2/F3 data containing gusts. It is shown that better fits to time histories are obtained by using the ML method. The nonlinear model considered corresponds to the longitudinal equations of the X-22 VTOL aircraft. The data are obtained from a computer simulation and contain both process and measurement noise. The applicability of the ML method to nonlinear models with both process and measurement noise is demonstrated.

Mehra, R. K.↗

Binary signaling over channels containing quadratic nonlinearities

This paper examines the transmission of binary data signals over channels which contain quadratic nonlinearities and additive Gaussian noise. We consider the case where the channel is nonlinear with memory and where the signal is passed through an input receiver filter and sampled once every signaling interval. The samples are represented by a discrete Volterra series and a special case where the received sample contains a single quadratic distortion term is examined. The optimum (maximum-likelihood) receiver (processor) is derived and upper and lower performance bounds obtained. The performance of a practical, suboptimum receiver is examined by means of computer simulation and is shown to be very close to the lower bound of the optimum receiver. Next we examine the case where the received sample contains two quadratic distortion terms. Again, upper and lower performance bounds are obtained.

Lawless, W. J.↗

On first cycle slip time of phase-locked loops in cascade

Precise measurement and spacecraft tracking are obtained by using phase-locked loops in cascade in two-way communications links. Statistics on cycle slip time are of vital importance in system planning and design. This paper presents: (1) results of a computer simulation study of the mean time to first cycle slip of cascade phase-locked loops preceded by bandpass limiters, and (2) the determination of probability distributions of cycle slip. Numerical results are obtained for a typical coherent communication system.

Yuen, J. H.↗

Response of an all digital phase-locked loop

An all digital phase-locked loop (DPLL) is designed, analyzed, and tested. Three specific configurations are considered, generating first, second, and third order DPLL's; and it is found, using a computer simulation of a noise spike, and verified experimentally, that of these configurations the second-order system is optimum from the standpoint of threshold extension. This substantiates results obtained for analog PLL's.

Garodnick, J.↗

Rigid body mode pointing accuracy and stability criteria for an orbiting spacecraft

The effect of gravity gradient torque disturbances (which is an order of magnitude greater than the other torque disturbances and is sinusoidal with a frequency of two cycles per orbit) on pointing accuracy can be predicted very precisely. However, since the sensor noise such as star tracker and gyro inherent noise, is random, their effect can only be predicted statistically. The most common method used is computer simulation with appropriate sensor model and adjusting spacecraft control laws for minimum pointing error, as presented by Harris (1972). The general investigation outlined theoretically relates spacecraft controls to pointing accuracy in terms of the sensor noise power spectrum. The results are presented in graphical form.

Sandhu, G. S.↗