Search NASA⌕ Search

SEARCH · Search NASA

Results for “Parallel Applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

New Direction in the Application of Thermoelectric Energy Converters

In southern countries, including European states, solar collectors for additional water-heating systems are widely used. However, the disadvantage of such systems is that a considerable proportion of solar energy cannot be used with increasing water temperature and dissipates into the environment. It is proposed to use waste heat at a high temperature, which is supplied to a thermoelectric generator (TEG) operating on the basis of a temperature difference between the hot water in the solar collector and cold water supplied to a radiator on the other TEG side. This is a new application of thermoelectric converters, in which the converter can act not only as a source of electrical energy but also as a source of low-potential heat coming from the radiator. The total conversion efficiency in such devices can reach 90%. It is shown that the use of p-type legs in a TEG with the cleavage planes of the legs parallel to the heat-flux direction instead of the conventional parallel orientation results in an increase in the thermoelectric efficiency by 25% on average in the temperature range of 100–300°C.

14 SOLAR ENERGY↗
DOE OSTI2017

Mixed Presence Collaboration using Scalable Visualizations in Heterogeneous Display Spaces

Mixed presence collaboration involves remote collaboration between multiple collocated groups. This paper presents the design and results of a user study that focused on mixed presence collaboration using large-scale tiled display walls. The research was conducted in order to compare data synchronization schemes for multi-user visualization applications. Our study compared three techniques for sharing data between display spaces with varying constraints and affordances. The results provide empirical evidence that using data sharing techniques with continuous synchronization between the sites lead to improved collaboration for a search and analysis task between remotely located groups. We have also identified aspects of synchronized sessions that result in increased remote collaborator awareness and parallel task coordination. It is believed that this research will lead to better utilization of large-scale tiled display walls for distributed group work.

data-conferencing↗
DOE OSTI2020

Toward Large-Scale Image Segmentation on Summit

Semantic segmentation of images is an important computer vision task that emerges in a variety of application domains such as medical imaging, robotic vision and autonomous vehicles to name a few. While these domain-specific image analysis tasks involve relatively small image sizes (~ 10 2 × 10 2 ), there are many applications that need to train machine learning models on image data with extents that are orders of magnitude larger (~10 4 × 10 4 ). Training deep neural network (DNN) models on large extent images is extremely memory-intensive and often exceeds the memory limitations of a single graphical processing unit, a hardware accelerator of choice for computer vision workloads. Here, an efficient, sample parallel approach to train U-Net models on large extent image data sets is presented. Its advantages and limitations are analyzed and near-linear strong-scaling speedup demonstrated on 256 nodes (1536 GPUs) of the Summit supercomputer. Using a single node of the Summit supercomputer, an early evaluation of a recently released model parallel framework called GPipe is demonstrated to deliver ~ 2X speedup in executing a U-Net model with an order of magnitude larger number of trainable parameters than reported before. Performance bottlenecks for pipelined training of U-Net models are identified and mitigation strategies to improve the speedups are discussed. Together, these results open up the possibility of combining both approaches into a unified scalable pipelined and data parallel algorithm to efficiently train U-Net models with very large receptive fields on data sets of ultra-large extent images.

Seal, Sudip↗
DOE OSTI2020

1st Computational Physics School for Fusion Research (2019 CPS-FR)

The rising number of applications of machine learning and computational statistics in fusion energy research requires flexibility in adopting a growing variety of tools. The Computational Physics School for Fusion Research (CPS-FR) aims at providing young researchers with critical skill sets to deal with modern fusion energy research challenges. The School aims at covering essentials of: Computational Statistics, Machine Learning, Deep Learning and optimization methods, Parallel Programming and HPC. As the first edition of the CPS-FR just concluded, this report highlights its main results and summarizes its contents.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

BISON Robustness and Performance Improvements

BISON is a modern finite-element based nuclear fuel performance code that has been under development at the Idaho National Laboratory (USA) since 2009 [1]. The code is applicable to both steady and transient fuel behavior and can be used to analyze 1D (spherically symmetric), 2D (axisymmetric and generalized plane strain) or 3D geometries. BISON is the fuel performance code used within CASL for LWR fuel under both normal operating and accident conditions. BISON is built using the INL Multiphysics ObjectOriented Simulation Environment, or MOOSE [2, 3]. MOOSE is a massively parallel, finite element-based framework to solve systems of coupled non-linear partial differential equations using the Jacobian-Free Newton Krylov (JFNK) method [4]. This enables investigation of computationally large problems, for example a full stack of discrete pellets in a LWR fuel rod, or every rod in a full reactor core. MOOSE supports the use of complex two and three-dimensional meshes and uses implicit time integration, important for the widely varied time scale in nuclear fuel simulation. An object-oriented architecture is employed which greatly minimizes the programming effort required to add new material and behavioral models. The flexibility of the implicit and fully coupled multiphysics approach comes with a need for constructing suitable approximations for the Jacobian matrix of the coupled system used for either preconditioning a Krylov solve or in a direct Newton solve. Preconditioning options for Bison problems need to be revisited with new preconditioning methods becoming available.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

Algorithmic Improvements for Portable Event-Based Monte Carlo Transport Using the Nvidia Thrust Library

High performance computing environments are progressively moving towards many-core computing architectures. The Los Alamos National Laboratory Trinity machine, available in late 2016, will use both Intel Xeon Haswell processors and Intel Xeon Phi Knights Landing many integrated core (MIC) coprocessors. The Lawrence Livermore National Laboratory Sierra machine, available in 2018, will use an IBM PowerPC architecture along with Nvidia graphics processing units (GPUs). Applications that must work in this supercomputing environment must continue to adapt in order to take advantage of the diverse hardware architectures that are coming. A significant consideration is not only the performance of the application on a given platform but also the portability of the application to other platforms. The algorithmic improvements presented in this paper build upon recently-reported work on event-based Monte Carlo transport in the ALPSMC code that models particle transport in one-dimensional binary stochastic media. That paper discussed the lack of available vectorization in the traditional history-based algorithm used for Monte Carlo transport and presented a data parallel event-based algorithm implemented using the Nvidia Thrust library for portability. The performance of the data parallel event-based algorithm implemented using Thrust was compared to a native CUDA implementation. The conclusions from that work were that the Thrust library abstraction technique caused too significant a loss in performance but that the event-based method was a viable option that should be further investigated. In this paper, we describe algorithmic improvements to the data parallel event-based algorithm previously presented. We made further algorithmic optimizations to the event-based CUDA implementation, most notably: data structure changes, a new conditional particle removal scheme in the event-based process, and the use of multiple GPUs. In addition to improvements to the algorithm, we re-implemented the Thrust version from the now further optimized CUDA version, giving a greater chance for success at a performant abstraction. Finally, we revisited our previous assumptions about the inability of the history-based method to achieve performance on vector style architectures such as the MICs and GPUs, with surprising and promising results. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Composition and Realization of Source-to-Sink High-Performance Flows: File Systems, Storage, Hosts, LAN and WAN

A number of Department of Energy (DOE) science applications, involving exascale computing systems and large experimental facilities, are expected to generate large volumes of data, in the range of petabytes to exabytes, which will be transported over wide-area networks for the purpose of storage, visualization, and analysis. To support such capabilities, significant progress has been made in various components including the deployment of 100 Gbps networks with future 1 Tbps bandwidth, increases in end-host capabilities with multiple cores and buses, capacity improvements in large disk arrays, and deployment of parallel file systems such as Lustre and GPFS. High-performance source-to-sink data flows must be composed of these component systems, which requires significant optimizations of the storage-to-host data and execution paths to match the edge and long-haul network connections. In particular, end systems are currently supported by 10-40 Gbps Network Interface Cards (NIC) and 8-32 Gbps storage Host Channel Adapters (HCAs), which carry the individual flows that collectively must reach network speeds of 100 Gbps and higher. Indeed, such data flows must be synthesized using multicore, multibus hosts connected to high-performance storage systems on one side and to the network on the other side. Current experimental results show that the constituent flows must be optimally composed and preserved from storage systems, across the hosts and the networks with minimal interference. Furthermore, such a capability must be made available transparently to the science users without placing undue demands on them to account for the details of underlying systems and networks. And, this task is expected to become even more complex in the future due to the increasing sophistication of hosts, storage systems, and networks that constitute the high-performance flows. The objectives of this proposal are to (1) develop and test the component technologies and their synthesis methods to achieve source-to-sink high-performance flows, and (2) develop tools that provide these capabilities through simple interfaces to users and applications. In terms of the former, we propose to develop (1) optimization methods that align and transition multiple storage flows to multiple network flows on multicore, multibus hosts; and (2) edge and long-haul network path realization and maintenance using advanced provisioning methods including OSCARS and OpenFlow. We also propose synthesis methods that combine these individual technologies to compose high-performance flows using a collection of constituent storage-network flows, and realize them across the storage and local network connections as well as long-haul connections. We propose to develop automated user tools that profile the hosts, storage systems, and network connections; compose the source-to-sink complex flows; and set up and maintain the needed network connections. These solutions will be tested using (1) 100 Gbps connection(s) between Oak Ridge National Laboratory (ORNL) and Argonne National Laboratory (ANL) with storage systems supported by Lustre and GPFS file systems with an asymmetric connection to University of Memphis (UM); (2) ORNL testbed with multicore and multibus hosts, switches with OpenFlow capabilities, and network emulators; and (3) 100 Gbps connections from ESnet and their Openflow testbed, and other experimental connections. This proposal brings together the expertise and facilities of the two national laboratories, ORNL and ANL, and UM. It also represents a collaboration between DOE and the Department of Defense (DOD) projects at ORNL by sharing technical expertise and personnel costs, and leveraging the existing DOD Extreme Scale Systems Center (ESSC) facilities at ORNL.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Implementing a neural network interatomic model with performance portability for emerging exascale architectures

The two main thrusts of computational science are increasingly accurate predictions and faster calculations; to this end, the zeitgeist in molecular dynamics (MD) simulations is pursuing machine learned and data driven interatomic models, e.g. neural network potentials, and novel hardware architectures, e.g. GPUs. Current implementations of neural network potentials are orders of magnitude slower than traditional interatomic models and while looming exascale computing offers the ability to run large, accurate simulations with these models, achieving portable performance for MD with new and varied exascale hardware requires rethinking traditional algorithms, using novel data structures, and library solutions. We re-implement a neural network interatomic model in CabanaMD, an MD proxy application, built on libraries developed for performance portability. Our implementation shows significantly improved thread scaling in this complex kernel as compared to a current LAMMPS implementation, across both strong and weak scaling. Our single-source solution enables simulations up to 20 million atoms on a single CPU node and 4 million atoms with improved performance on a single GPU. Furthermore, we also explore parallelism and data layout choices (using flexible data structures called AoSoAs) and their effect on performance, seeing up to ~50% and ~5% improvements in performance on a GPU by choosing the right level of parallelism and data layout respectively.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Scalable Distributed Memory Community Detection Using Vite

Graph clustering, popularly known as community detection, is a fundamental graph operation used in several applications of relevance for network analysis and cybersecurity. Community detection is an operation of partitioning a network into an arbitrary number of “communities” such that each com munity represents a tightly-knit group of nodes with relatively sparser connections to the rest of the nodes in the network. The need to compute clustering on large-scale networks necessitates the development of efficient parallel algorithms capable of exploiting modern parallel architectures. However, due to their irregular and inherently sequential nature, many of the current algorithms for community detection are challenging to parallelize. In response to the 2018 Graph Challenge, we present Vite which is a distributed-memory parallel community detection method. Vite is a parallelization of the algorithmic template provided by a widely-used serial method (Louvain). Alongside, it uses several heuristics aimed at significantly improving parallelism and performance, while preserving output quality. Using the inputs from the 2018 Graph Challenge (static and streaming), we demonstrate superior performance and high quality solutions based on four parallelization heuristics.

community detection↗
DOE OSTI2019

Thread Batching for High-performance Energy-efficient GPU Memory Design

Massive multi-threading in GPU imposes tremendous pressure on memory subsystems. Due to rapid growth in thread-level parallelism of GPU and slowly improved peak memory bandwidth, memory becomes a bottleneck of GPU’s performance and energy efficiency. In this article, we propose an integrated architectural scheme to optimize the memory accesses and therefore boost the performance and energy efficiency of GPU. First, we propose a thread batch enabled memory partitioning (TEMP) to improve GPU memory access parallelism. In particular, TEMP groups multiple thread blocks that share the same set of pages into a thread batch and applies a page coloring mechanism to bound each stream multiprocessor (SM) to the dedicated memory banks. After that, TEMP dispatches the thread batch to an SM to ensure high-parallel memory-access streaming from the different thread blocks. Second, a thread batch-aware scheduling (TBAS) scheme is introduced to improve the GPU memory access locality and to reduce the contention on memory controllers and interconnection networks. Experimental results show that the integration of TEMP and TBAS can achieve up to 10.3% performance improvement and 11.3% DRAM energy reduction across diverse GPU applications. We also evaluate the performance interference of the mixed CPU+GPU workloads when they are run on a heterogeneous system that employs our proposed schemes. Our results show that a simple solution can effectively ensure the efficient execution of both GPU and CPU applications.

Computer Science↗
DOE OSTI2018

pnnl/SHAD

Scalable High-performance Algorithms and Data-structures. Scalable High-performance Algorithms and Data-structures (SHAD) is an application programming interface based on a generic software library. It has a modular design that enables reuse of modules. The core of this software tool set is built on an Abstract Runtime interface and it's library includes the common data structures such as array, vector, map and set. It is designed to accommodate significant amount of data which can be accessed in massively parallel environments, and used as building blocks for SHAD extensions, i.e. higher level software libraries.

Castellana, Vito↗
DOE OSTI2022

Thermal neutron scattering cross sections for amorphous carbon

Carbon materials are commonly found in both nuclear reactors and experimental systems. Various carbon structures occur in nuclear applications ranging from crystalline and nuclear graphite to the amorphous carbon seen in next-generation advanced reactor designs. Amorphous carbon is based on a randomized graphite-like structure and offers the unique ability to disperse impurities throughout the bulk composition. A graphite-like amorphous carbon system was modeled using the classical molecular dynamics (MD) code LAMMPS (Large-scale Atomic/Molecular Massively Parallel Simulator). An improved version of the temperature-dependent Adaptive Intermolecular Reactive Empirical Bond Order (AIREBO) potential was used to model the carbon-carbon atomic interactions for the temperature at 300 K along with densities 1.60, 1.70, 1.85, and 2.23 g/cm{sup 3}. From the normalized velocity autocorrelation function (VACF), the phonon density of state (DOS) was then calculated as the Fourier transform of the normalized VACF. This DOS was then used as the primary input for the evaluation of the thermal scattering law (TSL, i.e. S(α,β)) and associated neutron thermal scattering cross sections. The TSL was analyzed using the Full Law Analysis Scattering System Hub (FLASSH). The amorphous structure results in shifts of the phonon DOS to lower energy modes than typically displayed for ideal crystalline graphite. This impact on the DOS is directly reflected in the TSL. Furthermore, the typical optical peak at 0.25 eV for the ideal graphite disappears for amorphous carbon, in good agreement with the expected structure. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Thermal Neutron Scattering Cross Sections for Graphitic Amorphous Carbon

Carbon materials are commonly found in both nuclear reactors and experimental systems. Various carbon structures occur in nuclear applications ranging from crystalline and nuclear graphite to the amorphous carbon seen in next-generation advanced reactor designs. Amorphous carbon is based on a randomized graphite-like structure and offers the unique ability to disperse impurities throughout the bulk composition. A graphite-like amorphous carbon system was modeled using the classical molecular dynamics (MD) code LAMMPS (Large-scale Atomic/Molecular Massively Parallel Simulator). An improved version of the temperature-dependent Adaptive Intermolecular Reactive Empirical Bond Order (AIREBO) potential was used to model the carbon-carbon atomic interactions for the temperature at 300 K along with densities 1.60, 1.70, 1.85, and 2.23 g/cm 3 . From the normalized velocity autocorrelation function (VACF), the phonon density of state (DOS) was then calculated as the Fourier transform of the normalized VACF. This DOS was then used as the primary input for the evaluation of the thermal scattering law (TSL, i.e. S(α,β)) and associated neutron thermal scattering cross sections. The TSL was analyzed using the Full Law Analysis Scattering System Hub (FLASSH). The amorphous structure results in shifts of the phonon DOS to lower energy modes than typically displayed for ideal crystalline graphite. This impact on the DOS is directly reflected in the TSL. Furthermore, the typical features and the optical graphitic peak at 0.25 eV for the ideal graphite DOS disappear for graphite-like amorphous carbon, which shows good agreement with the expected structure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

MOOSE: A Modular Platform for Fission and Fusion Multiphysics

The Multiphysics Object-Oriented Simulation Environment (MOOSE) Framework, as well as MOOSE-based simulation tools, have accelerated the development of fission energy and advanced reactor technologies through the United States Department of Energy, Office of Nuclear Science, Nuclear Energy Advanced Modeling & Simulation (NEAMS) Program. MOOSE contains a complete platform of multiphysics simulation capabilities, capable of running on massively parallel systems, and is developed in an open-source manner with great attention paid to high-quality software quality assurance practices. This overall approach could greatly benefit the fusion energy community, which requires rapid design iteration and improvement in order to facilitate the successful development of fusion as an alternative energy source to fossil fuels. In the first half of this talk, applications of MOOSE and MOOSE-based tools for advanced reactor designs will be showcased, as well as MOOSE ecosystem infrastructure (such as the NEAMS Virtual Test Bed) that enables and accelerates fission reactor design. In the second half, a discussion of how the MOOSE approach to modeling and simulation is currently being applied internationally in fusion energy research and development at the United Kingdom Atomic Energy Authority will be discussed, and ongoing/future domestic research efforts will be highlighted.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Virtual Cable Impedance based Load Sharing in a Microgrid for Parallel Connected Grid Forming Converters

This paper presents a novel approach to power sharing between direct connected grid-forming converters, utilizing virtual cable impedance and droop-based outer loop control. To enhance stability, resistive droop is implemented, while virtual cable impedance with non-zero resistive and inductive components ensures improved power sharing. The inner loop controller employs a Lyapunov energy function to achieve superior dynamic performance. The proposed control architecture is validated through comprehensive modeling and real-time processor-in-the-loop simulations, demonstrating its robustness and efficiency under various operating conditions. The results highlight the potential of this control strategy to improve the reliability and efficiency of renewable energy systems. Additionally, a comparative analysis with traditional methods underscores the advantages of the proposed approach in terms of stability and performance. The proposed control architecture offers a scalable and flexible solution for grid-forming converters, enabling seamless integration of renewable energy sources. Its robustness and adaptability make it an attractive solution for real-world applications. Furthermore, the approach can be extended to other power electronic systems, enhancing overall system performance and efficiency. By providing a reliable and efficient control strategy, this paper contributes to the advancement of renewable energy systems and their adoption in the energy sector. The proposed control strategy has far-reaching implications for the widespread adoption of renewable energy sources, enabling a more sustainable and efficient energy future. The overall system is modeled in MATLAB/Simulink and PLECS software domain.

grid forming converters (GFM)↗
DOE OSTI2024

A Generalized Nuclear Code of Accounts for Cost Estimation Standardization

This is a joint INL-EPRI study. Link to corresponding page at the Electric Power Research Institute (EPRI): https://www.epri.com/research/products/000000003002028937 Recent Advanced Reactor (AR) designs typically offer features and attributes that depart from traditional water-cooled reactors in terms of fuel forms, coolants, structural materials, size, safety margins, and other important design and operational aspects. These departures, relative to the industry experience, will likely present a challenge for potential owner-operators when evaluating one or more AR designs for commercial deployment on a like-for-like basis. This is further exacerbated with new classes of reactors gaining prominence (e.g., microreactors) and new emerging applications (e.g., floating barge reactors or space propulsion reactors). The differences in design-specific technologies are compounded by the differences in approach to cost estimation. The lack of consistency in build up toward cost estimates creates a challenge when comparing competing concepts and evaluating their associated cost drivers. The outcome of a 2019 Scoping Study conducted by the Electric Power Research Institute (EPRI) indicated the need for a cost modeling guide (CMG), which would be underpinned by a technology-neutral and inclusive Generalized Nuclear Code of Accounts (GN-COA). A code of accounts (COA) is a tool by which costs are identified in even more specific categories, providing clarity on what specific costs are included in an estimate. A parallel independent effort was meanwhile taking place at Idaho National Laboratory via funding by the Systems Analysis Integration (SA&I) campaign of the Office of Nuclear Energy under the U.S. Department of Energy (U.S. DOE-NE) to also update the COA structure to enable more flexibility and encompass a wider variety of reactor technologies. After being made aware of these synergistic efforts, the two parties decided to combine efforts and develop a joint new standard format for nuclear cost estimation that builds on previous structures. This document describes the development of this joint GN-COA and provides guidance on the implementation of the tool, which is provided as the associated GN-COA Excel document. The main attributes of this novel COA format are that all items are functionally defined (in order to be technology and application agnostic) and grouped into logical arrangements that facilitate the tabulation of costs for reactor constructions under consideration. The intent is for the GN-COA to form a standard that is endorsed by future vendors and customers.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2017

Fast and self-learning indoor airflow simulation based on in situ adaptive tabulation

Fast simulation for stratified indoor airflow distributions is desired for various applications, such as design of advanced indoor environments, emergency management, and coupled annual energy simulation for buildings with stratified air distributions. Reduced order models trained by pre-computed computational fluid dynamics results are fast, but their prediction may be inaccurate when applied for conditions outside the training domain. To overcome this limitation, we propose in this paper a fast and self-learning model based on an in situ adaptive tabulation (ISAT) algorithm, which is trained by a fast fluid dynamics (FFD) model as an example. The idea is that the ISAT will retrieve the solutions from an existing data set if the estimated prediction error is within a pre-defined tolerance. Otherwise, the ISAT will execute the FFD simulation, which is accelerated by running in parallel on a graphics processing unit, for a full-scale simulation. This paper systematically investigates the feasibility of the ISAT for indoor airflow simulations by presenting the ISAT-FFD implementation alongside results related to its overall performance. Using a stratified indoor airflow as an example, we evaluated how the training time of ISAT was impacted by four factors (training methods, error tolerances, number of inputs, and number of outputs). Then we demonstrated that a trained ISAT model can predict the key information for inputs both inside and outside the training domain. The ISAT was able to answer query points both inside and close to training domain using retrieve actions within a time less than 0.001 s for each query. In conclusion, we provided suggestions for using the ISAT for building applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2017

Metal–insulator transition tuned by magnetic field in Bi 1.7 V 8 O 16 hollandite

A metal–insulator transition tuned by application of an external magnetic field occurs in the quasi-one dimensional system Bi1.7V8O16, which contains a mix of S = 1 and S = 1/2 vanadium cations. Unlike all other known vanadates, the magnetic susceptibility of Bi1.7V8O16 diverges in its insulating state, although no long-range magnetic ordering is observed from neutron diffraction measurements, possibly due to the frustrated geometry of the triangular ladders. Magnetotransport measurements reveal that the transition temperature is suppressed upon application of an external magnetic field, from 62.5 K at zero field to 40 K at 8 T. This behavior is both hysteretic and anisotropic, suggesting t2g orbital ordering of the V3+ and V4+ cations drives a first-order structural transition. Single crystal X-ray diffraction reveals a charge density wave of Bi3+ cations with a propagation vector of 0.846c*, which runs parallel to the triangular chain direction. Neutron powder diffraction measurements show a first-order structural transition, characterized by the coexistence of two tetragonal phases near the metal–insulator transition. Finally, we discuss the likelihood that ferromagnetic V–V dimers coexist with a majority spin-singlet state below the transition in Bi1.7V8O16.

36 MATERIALS SCIENCE↗