Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Characterization of hot-pressed short ZrO{sub 2} fiber toughened ZrB{sub 2}-based ultra-high temperature ceramics

Two different ZrB{sub 2}-based ultra-high temperature ceramics were produced by hot pressing: ZrB{sub 2} + 20 vol.% SiC particle + 15 vol.% ZrO{sub 2} fiber and ZrB{sub 2} + 20 vol.% SiC whisker + 15 vol.% ZrO{sub 2} fiber. The microstructures were analyzed by using transmission electron microscopy and high-resolution transmission electron microscopy. It was shown that a clean interface without any impurities was identified in ZrB{sub 2}-based hybrid ceramics with SiC whiskers and ZrO{sub 2} fibers, which would significantly improve the toughening mechanism. The results of high-resolution transmission electron microscopy showed that stacking faults in SiC whiskers resulted from an insertion of a (111) layer, which would be one of the main reasons for material anisotropy. However, the interface between the SiC particle and ZrO{sub 2} fiber was found to be ambiguous in ZrB{sub 2}-based hybrid ceramics with SiC particles and ZrO{sub 2} fibers due to the slight reaction. The orientation relationship between t-ZrO{sub 2} and m-ZrO{sub 2} phases obeyed the classical correspondence: (100){sub m}//(100){sub t} and [001]{sub m}//〈001〉{sub t}, which further verified the feasibility of phase transformation toughening mechanism. - Highlights: • ZrB{sub 2}-based ceramics toughened by short ZrO{sub 2} fiber are characterized by TEM and HRTEM. • The orientation relationship of t- and m-ZrO{sub 2} are (100){sub m}//(100){sub t}, [001]{sub m}//〈001〉{sub t} • The clean interface without any impurities leads to improve the toughening mechanism.

36 MATERIALS SCIENCE↗

Strategic Surface Metering at Charlotte Douglas International Airport

NASA is conducting a field test of the Airspace Technology Demonstration2 (ATD-2) to evaluate an Integrated Arrival, Departure, and Surface (IADS) traffic management system. The IADS system was deployed to Charlotte Douglas International Airport (CLT) in 2017 for a three-year field evaluation. The Phase 1 field evaluation included tactical surface metering, which manages departure excess taxi time by tactically assigning gate holds. Phase 2 built upon the lessons learned from Phase 1 to extend surface metering into the strategic metering timeframes. In this paper, we describe the strategic metering capabilities of the ATD-2 IADS system and the operational results from CLT.

Airspace Technology Demonstration 2↗

Solution Combustion Synthesis of Fe{sub 3}O{sub 4} Powders Using Mixture of CTAB and Citric Acid Fuels

Magnetite (Fe{sub 3}O{sub 4}) powders were synthesized by solution combustion method using a mixture of cetyltrimethylammonium bromide (CTAB) and citric acid fuels at various fuel to oxidant ratios (ϕ = 0.5, 1, 1.5, and 2). Phase evolution investigated by x-ray diffraction method showed single-phase Fe{sub 3}O{sub 4} powders were only formed at ϕ = 1 using mixture of fuels, while impurity α-Fe{sub 2}O{sub 3} phase together with magnetite phase was completely disappeared at ϕ = 2 for CTAB fuel alone. The specific surface area and porous structures of the as-combusted Fe{sub 3}O{sub 4} powders were characterized by N{sub 2} adsorption-desorption isotherms and scanning electron microscopy techniques, respectively. The specific surface area using the mixture of fuels (37 m{sup 2}/g) was higher than that of CTAB fuel alone (32 m{sup 2}/g). Magnetic properties of the as-combusted powders were studied by vibration sample magnetometry method. The highest saturation magnetization of 83 emu/g was achieved by mixture of fuels at ϕ = 1, due to the high purity and large particle size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Feasibility study of an Integrated Program for Aerospace-vehicle Design (IPAD) system. Volume 5: Design of the IPAD system. Part 2: System design. Part 3: General purpose utilities, phase 1, task 2

Viable designs are presented of various elements of the IPAD framework software, data base management system, and required new languages in relation to the capabilities of operating systems software. A thorough evaluation was made of the basic systems functions to be provide by each software element, its requirements defined in the conceptual design, the operating systems features affecting its design, and the engineering/design functions which it was intended to enhance.

Garrocq, C. A.↗

Advanced Collaborative Emissions Study (ACES)

The objective of the Advanced Collaborative Emissions Study (ACES) was to determine before widespread commercial deployment whether or not the new, energy-efficient, heavy duty diesel engines (2007 and 2010 EPA Emissions Standards Compliant) may generate anticipated toxic emissions that could adversely affect the environment and human health. ACES was planned to take place in three phases. In Phase 1, extensive emissions characterization of four production-intent prototype engine and control systems designed to meet 2007 standards for nitrogen oxides (NOx) and particulate matter (PM) was conducted at an existing emissions characterization facility: Southwest Research Institute (SwRI). One of the tested engines was selected (at random, after careful comparison of results) for health testing in Phase 3. In Phase 2, extensive emission characterization of three production-intent prototype engine and control systems meeting the 2010 standards (including more advanced NOx controls to meet the more stringent 2010 NOx standards) was conducted at the same test facility. In Phase 3, one engine/aftertreatment system selected from Phase 1 was further characterized during health effects studies (at an existing inhalation toxicology laboratory: Lovelace Respiratory Research Institute, [LRRI]) to form the basis of the ACES safety assessment. The Department of Energy (DOE) award provided funding for emissions characterization in Phases 1 and 2 as well as exposure characterization in Phase 3. The main health analyses in Phase 3 were funded separately and are not reported here.

54 ENVIRONMENTAL SCIENCES↗

Diffusion behavior of Ag in TiO2 nanofilms

Highlights: • We prepared Ag/TiO{sub 2} bilayer nanofilms and heat treatment at 400 °C lead to the formation of Ag nanoparticles, which evenly distributed inside TiO{sub 2} nanofilms. • Ag is not oxidized during the heat treatment. • The morphology and size of Ag nanoparticles after heat treatment is temperature related, higher temperature lead to larger Ag nanoparticles on the surface of the film. • The diffusion process is of Ag much easier in amorphous than in anatase structure. - Abstract: Using magnetron sputtering, Ag/TiO{sub 2} bilayer nanofilms were deposited on glass substrates. Heat-treating the Ag/TiO{sub 2} nanofilms at 400 °C led to the formation of Ag nanoparticles, which dispersed inside the TiO{sub 2} films as well as the free surface of the TiO{sub 2} films. After heat treatment the sample at 500 °C, larger Ag nanoparticles could be observed on the surface, which means the particle size after heat treatment is temperature related. Anatase TiO{sub 2} phase was formed after the Ag/TiO{sub 2} films were heat-treated at 400 °C. SEM and TEM were used to investigate the morphology and structure of the films and it was found that Ag was not oxidized during heat treatment. The diffusion process of Ag in TiO{sub 2} film is also related to the order of Ag layer and TiO{sub 2} layer on glass substrate. Moreover, the diffusion process is much easier in amorphous than that in anatase structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Water mediated growth of oriented single crystalline SrCO3 nanorod arrays on strontium compounds

Abstract Morphology-controlled strontianite nanostructures have attracted interest in various fields, such as electrocatalyst and photocatalysts. Basic additives in aqueous strontium solutions is commonly used in controlling strontianite nanostructures. Here, we show that trace water also serves an important role in forming and structuring vertically oriented strontianite nanorod arrays on strontium compounds. Using in situ Raman spectroscopy, we monitored the structural evolution from hydrated strontium to strontianite nanorods, demonstrating the epitaxial growth by vapor–liquid–solid mechanism. Water molecules cause not only the exsolution of Sr liquid droplets on the surface but also the uptake of airborne CO 2 followed by its ionization to CO 3 2− . The existence of intermediate SrHO + –OCO 2 2− phase indicates the interaction of CO 3 2− with SrOH + in Sr(OH) x (H 2 O) y cluster to orient strontianite crystals. X-ray diffraction simulation and transmission electron microscopy identify the preferred-orientation plane of the 1D nanostructures as the (002) plane, i.e., the growth along the c-axis. The anisotropic growth habit is found to be affected by the kinetics of carbonation. This study paves the way for designing and developing 1D architecture of alkaline earth metal carbonates by a simple method without external additives at room temperature.

36 MATERIALS SCIENCE↗

Effects of grain size and small-scale bedform architecture on CO 2 saturation from buoyancy-driven flow

Small-scale (mm-dm scale) heterogeneity has been shown to significantly impact CO 2 migration and trapping. To investigate how and why different aspects of small-scale heterogeneity affect the amount of capillary trapping during buoyancy-driven upward migration of CO 2 , we conducted modified invasion percolation simulations on heterogeneous domains. Realistic simulation domains are constructed by varying two important aspects of small-scale geologic heterogeneity: sedimentary bedform architecture and grain size contrast between the matrix and the laminae facies. Buoyancy-driven flow simulation runs cover 59 bedform architecture and 40 grain size contrast cases. Simulation results show that the domain effective CO 2 saturation is strongly affected by both grain size and bedform architecture. At high grain size contrasts, bedforms with continuous ripple lamination at the cm scale tend to retain higher CO 2 saturation than bedforms with discontinuous or cross lamination. In addition, the “extremely well sorted” grain sorting cases tend to have lower CO 2 saturation than expected for cross-laminated domains. Finally, both a denser CO 2 phase and greater interfacial tension increase CO 2 saturation. Again, variation in fluid properties seems to have a greater effect on CO 2 saturation for cross-laminated domains. This result suggests that differences in bedform architecture can impact how CO 2 saturation values respond to other variables such as grain sorting and fluid properties.

58 GEOSCIENCES↗

Possible interaction driven topological phases in (111) bilayers of LaNiO3

We use the variational mean-field approach to systematically study the phase diagram of a bilayer heterostructure of the correlated transition metal oxide LaNiO3, grown along the (111) direction. The Ni3+ ions with d7 (or e1g) configuration form a buckled honeycomb lattice. We show that as a function of the strength of the on-site interactions, various topological phases emerge. In the presence of a reasonable size of the Hund s coupling, as the correlation is tuned from intermediate to strong, the following sequence of phases is found: (1) a Dirac half-semimetal phase, (2) a quantum anomalous Hall insulator (QAHI) phase with Chern number one, and (3) a ferromagnetic nematic phase breaking the lattice point group symmetry. The spin-orbit couplings and magnetism are both dynamically generated in the QAHI phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SU-E-T-648: Quality Assurance Using the RADPOS System for 4D Radiotherapy with CyberKnife

Purpose: The CyberKnife robotic radiosurgery system uses Synchrony respiratory motion compensation, which requires independent performance verification. In this work, the RADPOS 4D dosimetry system’s motion measurements are compared with internal fiducial position measurements. In addition, RADPOS measurements are compared with Synchrony’s predictive correlation model, which is based on internal fiducial and external LED marker position measurements. Methods: A treatment plan was created for a lung insert containing fiducials, RADPOS detector, and Solid Water tumor phantom. Two Quasar Respiratory Motion Phantoms (Q1 and Q2) and two RADPOS detectors (R1 and R2) were used: Q1 simulated lung motion with a lung insert moving in the superior/inferior direction, while Q2 simulated chest motion with a chest platform moving in the anterior/posterior direction. Before treatment, R1 was secured inside of the tumor phantom within Q1, while LED markers and R2 were positioned on the chest platform of Q2. Two treatment delivery cases were studied: isocentric plan (I) and non-isocentric patient plan (P). Four motion cases were studied: no motion (0), sinusoidal and in-phase (1), sinusoidal and out-of-phase (2), patient waveform and out-of-phase (3). A coordinate alignment algorithm was implemented, allowing RADPOS and model position data to be compared within the fiducial coordinate system. Results: The standard deviation of the differences between RADPOS and fiducial position measurements was below 0.6 mm for all experimental cases. The standard deviation of the differences between RADPOS and model position data was 1.0, 1.5, and 1.6 mm along the primary direction of motion for case I1, I2, and P3, respectively. Conclusion: Our work demonstrates that RADPOS is a useful tool for independent quality assurance of CyberKnife treatment with Synchrony respiratory compensation. RADPOS and fiducial position measurement closely match, and RADPOS confirms the effectiveness of CyberKnife’s Synchrony motion tracking. This work was supported by OCAIRO (Ontario Consortium for Adaptive Interventions in Radiation Oncology) grant.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Iron Corrosion Observations: Pu(VI)-Fe Reduction Studies

Iron and Pu Reduction: (1) Very different appearances in iron reaction products were noted depending on pH, brine and initial iron phase; (2) Plutonium was associated with the Fe phases; (3) Green rust was often noted at the higher pH; (4) XANES established the green rust to be an Fe2/3 phase with a bromide center; and (5) This green rust phase was linked to Pu as Pu(IV).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Carolina Offshore Wind Integration Case Study: Phases I and II Final Technical Report

Duke Energy performed a phase 1 study to assess the impact of offshore wind development in the waters off the coasts of North Carolina and South Carolina. The study analyzed the impacts to the Duke Energy Carolinas electric power system of multiple wind deployment scenarios. Focusing on an integrated utility system in the Carolinas provided a unique opportunity to assess the impacts of offshore wind development in a region that has received less attention regarding renewables than others in the US. North Carolina is the only state in the Southeastern United States that currently has a renewable portfolio standard (RPS) which requires that 12.5% of the state’s total energy requirements be met with renewable resources by 2021. 12.5% of the state’s total energy requirements in 2021 equates to approximately 17,000 GWH of energy needed from renewable resources. Wind resources represent one of the ways to potentially meet this requirement. The study builds upon and augments ongoing work, including a study by UNC to identify potential wind development sites and the analysis of impacts to the regional transmission system performed by the NCTPC, an Order 890 planning entity of which DEC is a member. Furthermore, because the region does not have an independent system operator (ISO) or regional transmission organization (RTO), the study will provide additional information unique to non-RTO/ISO systems. The Phase 2 study builds on the results of Phase 1 and investigates the dynamic stability of the electrical network in Task 4, the operating characteristics of the wind turbines as they impact operating reserve requirements of the DEC utility in Task 5, and the production cost of integrating the offshore wind resources into the DEC generation fleet making comparisons to future planned operation without the addition of the wind resources in Task 6.

17 WIND ENERGY↗

Degradation science: Integrating modeling and experiments to predict localized corrosion processes (Annual Progress Report)

Additively manufactured (AM) eutectic high-entropy alloys (EHEAs), such as nano-lamellar AlCoCrFeNi 2.1 , have excellent strength, ductility, and wear resistance even at elevated temperatures, but their corrosion behavior in aggressive acids at different length scales remain poorly understood. This work investigates the corrosion behavior of laser powder bed–fused (L-PBF) AlCoCrFeNi 2.1 as a function of annealing temperatures, probing degradation mechanisms from nanoscopic to macroscopic length scales. The alloy is dual phase consisting of a ductile FCC L1 2 phase and a high-strength BCC B2 phase. Rapid solidification during L-PBF produces a far-from-equilibrium nano-lamellar structure with nearly homogeneous elemental distribution, which tends to evolve upon annealing toward Cr/Co/Fe-enriched FCC and Al/Ni-enriched B2. Three conditions were studied: as-printed, 600 °C/5 h, and 1000 °C/1 h, over which B2 lamellae coarsen, lamellar spacing increases, and elemental segregation becomes more prominent. Microstructure and chemistry were characterized by scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS), while in-situ electrochemical atomic force microscopy (EC-AFM) was used to link early (<5 h) local dissolution to microstructure after exposure in sulfuric acid. EC-AFM highlights preferential dissolution of the BCC/B2 phase where the surrounding matrix is Cr-depleted and directly quantifies the dissolution rates within individual phases, tracks the transition from early nano-scale attack to partial repassivation, to correlate height differences with current and impedance responses. To monitor longer-term behavior (up to 96 h), ex-situ AFM, SEM, and confocal imaging were combined with conventional bulk electrochemical tests, bridging nanoscale observations to micro/meso-scale damage morphologies. At the meso-scale, the deepest dissolution channels align with the build-direction lamellae and melt-pool boundaries, indicating that printing directionality guides the propagation of these localized corrosion sites. Annealing modifies corrosion by restructuring BCC/FCC phase fractions, lamellar spacing, and Cr/Al segregation, thereby changing the cathode/anode ratio and passive film stability. The results clarify how as-printed and annealed nano-lamellar architectures differ in their susceptibility to selective dissolution; how elemental segregation competes with residual stresses along the build direction. With these insights, future work will use CALPHAD-guided alloy modification to stabilize higher Cr contents in the B2 phase while retaining a dominant FCC+B2/BCC microstructure, with the goal of designing mechanically robust, corrosion-resistant EHEAs for safety-critical applications to leverage the LLNL’s broader national and global security mission.

36 MATERIALS SCIENCE↗

System technology analysis of aeroassisted orbital transfer vehicles: Moderate lift/drag (0.75-1.5), Volume 1B, part 2, study results

A complete compilation of the results from Phase 2 of a study to identify and prioritize the technology payoffs of representative space based mid lift/drag ratio (L/D) aeroassisted orbit transfer vehicles (AOTV) and the cryofueled propulsion subsystem - configuration interactions is presented. Several combinations of basing and launch vehicle options, staging scenarios, missions (delivery, servicing, or manned round trip), and target orbits were considered. Space basing of an AOTV opens up numerous configuration opportunities. The size can exceed the launch vehicle cargo bay envelope by resorting to orbital assembly and the AOTV weight can exceed the launch vehicle capability. With the absence of fully fueled tanks during a ground based launch much lighter gossamer type structures are possible that may result in performance gains. At the Space Station, payload rearranging or manifesting may prove attractive. Several major conclusions regarding aerothermodynamics, aerodynamics, payload manifesting, the propulsion subsystem, and systems issues are discussed.

Source record↗

Laser Atmospheric Wind Sounder (LAWS) phase 1. Volume 3: Project cost estimates

The laser atmospheric wind sounder (LAWS) cost modeling activities were initiated in phase 1 to establish the ground rules and cost model that would apply to both phase 1 and phase 2 cost analyses. The primary emphasis in phase 1 was development of a cost model for a LAWS instrument for the Japanese Polar Orbiting Platform (JPOP). However, the Space Station application was also addressed in this model, and elements were included, where necessary, to account for Space Station unique items. The cost model presented in the following sections defines the framework for all LAWS cost modeling. The model is consistent with currently available detail, and can be extended to account for greater detail as the project definition progresses.

Source record↗

Formed platelet combustor liner construction feasibility, phase A

Environments generated in high pressure liquid rocket engines impose severe requirements on regeneratively cooled combustor liners. Liners fabricated for use in high chamber pressures using conventional processes suffer from limitations that can impair operational cycle life and can adversely affect wall compatibility. Chamber liners fabricated using formed platelet technology provide an alternative to conventional regeneratively cooled liners (an alternative that has many attractive benefits). A formed platelet liner is made from a stacked assembly of platelets with channel features. The assembly is diffusion bonded into a flat panel and then three-dimensionally formed into a section of a chamber. Platelet technology permits the liner to have very precisely controlled and thin hot gas walls and therefore increased heat transfer efficiency. Further cooling efficiencies can be obtained through enhanced design flexibility. These advantages translate into increased cycle life and enhanced wall compatibility. The increased heat transfer efficiency can alternately be used to increase engine performance or turbopump life as a result of pressure drop reductions within the regeneratively cooled liner. Other benefits can be obtained by varying the materials of construction within the platelet liner to enhance material compatibility with operating environment or with adjoining components. Manufacturing cost savings are an additional benefit of a formed platelet liner. This is because of reduced touch labor and reduced schedule when compared to conventional methods of manufacture. The formed platelet technology is not only compatible with current state-of-the art combustion chamber structural support and manifolding schemes, it is also an enabling technology that allows the use of other high performance and potentially low cost methods of construction for the entire combustion chamber assembly. The contract under which this report is submitted contains three phases: (1) phase A - feasibility study and technology development; (2) phase B - sub-scale fabrication feasibility; and (3) phase C - large scale fabrication validation. This report covers the Phase A activities, which began in December of 1988.

Hayes, W. A.↗

Space-Based Telemetry and Range Safety Project Ku-Band and Ka-Band Phased Array Antenna

The National Aeronautics and Space Administration Space-Based Telemetry and Range Safety study is a multiphase project to increase data rates and flexibility and decrease costs by using space-based communications assets for telemetry during launches and landings. Phase 1 used standard S-band antennas with the Tracking and Data Relay Satellite System to obtain a baseline performance. The selection process and available resources for Phase 2 resulted in a Ku-band phased array antenna system. Several development efforts are under way for a Ka-band phased array antenna system for Phase 3. Each phase includes test flights to demonstrate performance and capabilities. Successful completion of this project will result in a set of communications requirements for the next generation of launch vehicles.

Whiteman, Donald E.↗