Search NASA⌕ Search

SEARCH · Search NASA

Results for “texturization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Electron microscopic observations of hydrogen implantation in ilmenites

Hydrogen ion beams were found to form submicrometer, bumpy textures on the surface of ilmenite grains. From this effect, it is believed that similar bumpy textures seen on lunar ilmenite, pyroxene, and olivine grains are likely to be caused by solar wind irradiation. As a consequence, the concentration of bumpy textured grains may be a useful index of surface maturity for lunar soils. An attempt was made to search for grains with these bumpy textures in interplanetary dust and lunar and meteoritic regolith breccias in order to obtain information about the duration of their exposure to the solar wind. Solar wind irradiation was simulated on natural, terrestrial ilmenite. Hydrogen ion beams were directed at small grains and polished sections which were then examined by electron microscopy.

Blanford, G. E.↗

Carbon and carbon-coated electrodes for multistage depressed collectors for electron-beam devices - A technology review

Various aspects of carbon and carbon-coated multistaged depressed collector (MDC) electrode technology are reviewed. The physical properties of untreated graphite electrodes, ion-textured graphite electrodes, and textured, carbon-coated copper electrodes, and surface treatment procedures for these electrodes are described. The secondary electron emissions of the three electrode types are analyzed. MDC fabrication methods are discussed. The performances of MDCs fabricated with untreated graphite electrodes, ion-textured graphite electrodes, and textured, carbon-coated copper electrodes are evaluated. MDC and TWT efficiency levels for tubes fabricated with the three materials are measured.

Curren, Arthur N.↗

Petrology and precursors of lithic clasts from feldspathic fragmental breccia 67975

Textures and mineral chemistry (by INAA) of five lithic clasts, including both light green and light gray clasts, from feldspathic fragmental breccia 67975 were studied. The presence of five rock types was confirmed: feldspathic microporphyritic melt breccia, metamorphosed mafic-rich melt breccia with zoned and mantled clasts, 'typical' reequilibrated lunar feldspathic granulites with granoblastic texture and homogeneous mineral chemistry, hornfels, and a recrystallized mafic-rich granulite with relict igneous texture and the composition of a ferroan anorthositic norite. The mineralogy and textural data corroborate the grouping of the light green clasts proposed by Lindstrom (1984). However, the light gray clasts do not appear to be coherent in petrologic (or chemical) characteristics; one is a plagioclase-rich, possibly monomict rock with ferroan anorthositic precursor(s), and the other represents a mixture of feldspathic granulite and ferroan anorthositic norite lithologies.

Mcgee, James J.↗

Development of 8 cm x 8 cm silicon gridded back solar cell for space station

The 8-cm x 8-cm gridded back cell being developed for the space station photovoltaic array is described. Modeling studies show that the beginning of life power output of 1.039 W per cell may be met by several different configurations, the most promising being either a fielded or nonfielded 2 ohm-cm planar 8-mil cell. Experimental data are presented which show that a thermal alpha of 0.63 is achievable on a planar cell but at the expense of some Isc. Planar cells are found to possess short-circuit currents which are 9 percent lower than on textured cells due to the loss of near-IR radiation by transmission through the cell. Preliminary modeling shows that the efficiency of the textured cell exceeds the planar cell by approximately 9 percent at 25 C but the situation is reversed in orbit due to the high thermal alpha of textured cells (0.82). Experimental data show that the IR absorption in textured cells can be reduced by about 3 alpha points without loss of efficiency by controlling the doping concentration in the diffused layers, thus increasing the efficiency in orbit.

Lillington, D. R.↗

The visual control of simulated altitude

The ability of a subject flying an experimental flight to use the different sources of visual information by looking at the vertical tracking error was investigated using a 3 (altitude) x 3 (texture) x 2 (replication) factorial design. Each subject flew these 18 flights in the same partially counterbalanced order, constructed such that there was one flight at each of the three altitudes, and over each of the three surface textures within each successive set of three flights. The three ground-surface textures used consisted of meridian, latitudinal, and square textures described by Wolpert et al. (1983). The results showed that, in displays where only splay information was available, the subjects tended to confuse lateral motion with vertical.

Johnson, Walter W.↗

Aeolian removal of dust from radiator surfaces on Mars

Simulated radiator surfaces made of arc-textured Cu and Nb-1 percent-Zr and ion beam textured graphite and C-C composite were fabricated and their integrated spectral emittance characterized from 300 to 3000 K. A thin layer of aluminum oxide, basalt, or iron (III) oxide dust was then deposited on them, and they were subjected to low pressure winds in the Martian Surface Wind Tunnel. It was found that dust deposited on simulated radiator surfaces may or may not seriously lower their integrated spectral emittance, depending upon the characteristics of the dust. With Al2O3 there is no appreciable degradation of emittance on a dusted sample, with basaltic dust there is a 10 to 20 percent degradation, and with Fe2O3 a 20 to 40 percent degradation. It was also found that very high winds on dusted highly textured surfaces can result in their abrasion. Degradation in emittance due to abrasion was found to vary with radiator material. Arc-textured Cu and Nb-1 percent Zr was found to be more susceptible to emittance degradation than graphite or C-C composite. The most abrasion occurred at low angles, peaking at the 22.5 deg test samples.

Gaier, James R.↗

Formation conditions of pyroxene-olivine and magnesian olivine chondrules

Dynamic crystallization experiments performed on a Type I and an intermediate Type II/III composition demonstrate chondrule texture is controlled by the abundance of heterogeneous nuclei. This factor is controlled by the maximum initial temperature relative to the olivine disappearance temperature for the given heating time. Glassy and excentroradial textures form from superheated melts with no nuclei, and barred textures form with initial temperatures near the olivine disappearance temperature. Porphyritic and granular textures form with initial temperatures below the liquidus with abundant nuclei. Comparison of zoning characteristics of experimental olivines with those in natural porphyritic olivine chondrules indicates cooling rates of 100 to 1000 C/h, whereas olivine morphology indicates barred olivines cooled at rates of 250 to 1000 C/h. Texture/composition relationships suggest chondrules experienced initial temperatures below 1750 C. These observations are consistent with the idea that chondrules formed by transient heating in dust-rich regions (i.e., in the midplane) of the solar nebula.

Radomsky, Patrick M.↗

Temperature conditions for chondrule formation

An attempt is made to constrain the chondrule-forming process from dynamic crystallization experiments on chondrule analogs and from correlations between texture and bulk composition in natural chondrules. Liquidus temperatures for chondrules from unequilibrated chondrites are calculated using Herzberg's (1979) method. The paper then infers whether each chondrule formed above, at, or below its liquidus based on textures produced in experiments. A range of temperatures to which chondrules may have been initially heated is then derived from the texture-composition-temperature relationships. Finally, the role of dust seeding, or external heterogeneous nucleation, in producing chondrule textures is examined.

Hewins, Roger H.↗

High emittance surfaces for high temperature space radiator applications

Surface modification techniques are evaluated for emittance enhancement of radiator surfaces. These techniques include acid etching, heat treating, abrasion, sputter texturing, electrochemical texturing, arc texturing, and atomic oxygen beam texturing. Candidate radiator surface materials under consideration include Nb-1 pct Zr, Cu, Ti, Ti-6 pct Al-4 pct V, 304 stainless steel, Al6061-T6, Mo, W, and Ta.

Banks, Bruce A.↗

SAR backscatter from coniferous forest gaps

A study is in progress comparing Airborne Synthetic Aperture Radar (AIRSAR) backscatter from coniferous forest plots containing gaps to backscatter from adjacent gap-free plots. Issues discussed are how do gaps in the range of 400 to 1600 sq m (approximately 4-14 pixels at intermediate incidence angles) affect forest backscatter statistics and what incidence angles, wavelengths, and polarizations are most sensitive to forest gaps. In order to visualize the slant-range imaging of forest and gaps, a simple conceptual model is used. This strictly qualitative model has led us to hypothesize that forest radar returns at short wavelengths (eg., C-band) and large incidence angles (e.g., 50 deg) should be most affected by the presence of gaps, whereas returns at long wavelengths and small angles should be least affected. Preliminary analysis of 1989 AIRSAR data from forest near Mt. Shasta supports the hypothesis. Current forest backscatter models such as MIMICS and Santa Barbara Discontinuous Canopy Backscatter Model have in several cases correctly predicted backscatter from forest stands based on inputs of measured or estimated forest parameters. These models do not, however, predict within-stand SAR scene texture, or 'intrinsic scene variability' as Ulaby et al. has referred to it. For instance, the Santa Barbara model, which may be the most spatially coupled of the existing models, is not truly spatial. Tree locations within a simulated pixel are distributed according to a Poisson process, as they are in many natural forests, but tree size is unrelated to location, which is not the case in nature. Furthermore, since pixels of a simulated stand are generated independently in the Santa Barbara model, spatial processes larger than one pixel are not modeled. Using a different approach, Oliver modeled scene texture based on an hypothetical forest geometry. His simulated scenes do not agree well with SAR data, perhaps due to the simple geometric model used. Insofar as texture is the expression of biological forest processes, such as succession and disease, and physical ones, such as fire and wind-throw, it contains useful information about the forest, and has value in image interpretation and classification. Forest gaps are undoubtedly important contributors to scene variance. By studying the localized effects of gaps on forest backscatter, guided by our qualitative model, we hope to understand more clearly the manner in which spatial heterogeneities in forests produce variations in backscatter, which collectively give rise to scene texture.

Day, John L.↗

Alteration and formation of rims on the CM parent body

All types of coarse-grained components in CM chondrites are surrounded by fine-grained dust coatings, but the origin of these rims is not yet clear. Although a strictly nebular origin seems likely for rims in the relatively unaltered type 3 chondrites, the rims in CM chondrites are dominated by secondary alteration phases. It has been argued that either the coarse-grained cores accreted altered rim materials while still in the nebula or that alteration of primary rim phases occurred on the CM parent body. To constrain the origin of alteration phases in rim material, we have analyzed the textures and mineral associations from 10 CM chondritic falls by optical and scanning electron microscopy. Our results indicate that the secondary phases in CM chondritic rims were produced by parent body fluid-rock interactions which redefined some primary rim textures and may have produced, in some cases, both coarse-grained components and the rims that surround them. Textural features demonstrate the interactive exchange of alteration fluids between rims, matrix, and chondrules on the CM parent body. For example, most matrix-rim contacts are gradational, suggesting the synchronous alteration of both components. Several observations suggest the possibility of in situ rim production. For example, tochilinite and phyllosilicates commonly form rims around matrix carbonates, which are generally believed to have precipitated from alteration fluids on the CM parent body. This suggests that the rims surrounding matrix carbonates may also have been produced by alteration processes. Partially replaced chondrule olivines bear a striking resemblance to many rimmed olivines in the matrix which suggests, by analogy, that site-specific precipitation of S-bearing phases may also be responsible for the occurrence of many tochilinite-rich rims around isolated matrix olivines. Non-silicate rims precipitate around olivines of any composition, but the process is most effective for fayalitic olivines. Most of the remaining olivines in CM chondrites are relatively Mg-rich, which suggests that the precipitation of S-bearing rims on olivines may not have been an important process in the aqueous alteration of CM chondrites. We conclude that: (1) precursor rim materials in CM chondrites were subjected to pervasive aqueous alteration on the CM parent body; and (2) textures and mineral associations observed in CM chondrites also suggest the possibility of in situ rim production.

Browning, Lauren B.↗

Porphyritic versus nonporphyritic chondrules

Chondrules can be divided into two broad textural types: porphyritic and nonporphyritic. Porphyritic chondrules are the most common in most chondrites and range texturally from olivine-rich (PO) to intermediate (POP) to pyroxene-rich (PP). Barred olivine (BO) chondrules can be considered a special case of porphyritic. Compositionally they can be divided into type I and II. Nonporphyritic are less abundant than porphyritic chondrules in most chondrites -- they make up approximately 125% of the chondrules in ordinary chondrites -- and range texturally from glassy (g) to cryptocrystalline (C) to radial pyroxene (RP). Compositionally nonporphyritic differ from porphyritic chondrules and within this group they are very similar to one another. Here we (1) review and contrast the characteristics of the nonporphyritic and porphyritic chondrules; (2) specify some of the problems associated with the origins of the textural and compositional differences between them; and (3) suggest a possible scenario for their origin, which may have important implications for the evolution of chondrules.

Nehru, C. E.↗

Formation of thin sulfide rinds on the CM parent body

Many of the textures that are observed in CM chondrites have been alternately assigned nebular, parent-body, or combined nebular-parent body origins. Since it is very difficult to substantiate the production of complex textures in the nebula, an alternate approach to this problem is to rigorously determine which of the observable textures could have been produced by reasonable aqueous alteration processes on the CM parent body. Potential parent body reactions involving S deserve special attention because S-bearing phase define many important CM textures, such as rims. We have examined the possibility that the thin (about 5 microns) rinds of sulfides observed around some partially dissolved olivines within the chondrules and matrixes of CM chondrites were formed by the preferential precipitation of sulfides at or near dissolving olivine boundaries during parent-body alteration. Our model defines two infinite and parallel planes of olivine that are separated by pure water. Average separation distances between olivine grains in CM chondrites at the time of accretion (about 100-200 microns) were estimated by assuming a closed system fluid/rock ratio of 45% and varying the bimodal grain-size distribution. We restrict our calculations to the case of an isochemical system with sufficient bisulfide in solution to account for precipitation of pyrrhotite at STP. Our model examines the possibility that dissolving olivines with compositions between Fo(sub 0.9) and Fo(sub 0.4) can produce a strong gradient of Fe(2+) at pHs from 7 to 12 such that the precipitation of pyrrhotite will be initiated at the olivine-fluid boundary. Since CM phase equilibria is consistent with highly reducing conditions, Fe released by olivines would largely remain in solution as Fe(2+) until the solubility product of a Fe(2+) bearing phase was exceeded. Our calculations indicate that all examined combinations of olivine composition and pH yield a strong Fe(2+) gradient at the time the pyrrhotite solubility is exceeded near the olivine-fluid boundary. This favors the initiation of sulfide precipitation around dissolving olivines. However, sulfide rinds are not observed around all partially dissolved olivine grains in CM chondrites, which suggests that the availability of aqueous sulfide species limits the production of the thin sulfide rinds.

Browning, L. B.↗

Petrology of the Indian Eucrite Piplia Kalan

Piplia Kalan is an equilibrated eucrite consisting of 60-80 vol.% lithic clasts in a subordinate brecciated matrix. Ophitic/subophitic lithic clasts fall into two groups: finer-grained lithology A and coarser-grained lithology B. Very fine-grained clasts (lithology C) also occur and originally were hypocrystalline in texture. The variety of materials represented in Piplia Kalan suggests cooling histories ranging from quenching or fast crystallization to slower crystallization. Despite textural differences, clasts and matrix have similar mineral and bulk compositions. Thus. Piplia Kalan is probably best classified as a genomict breccia that could represent fragments of a single lava flow or shallow intrusive body, including fine-grained or glassy outer margin and more slowly cooled coarser-grained interior. Piplia Kalan displays evidence of an early shock event, including brecciated matrix and areas of lithic clasts that contain fine-grained, equigranular pyroxene between deformed feldspar laths. The meteorite also displays evidence of at least one episode of thermal metamorphism: hypocrystalline materials are recrystallized to hornfelsic textures and the matrix has a nonporous texture similar to those of eucrites that were affected by post-brecciation heating. Veins of brown glass transect both lithic clasts and brecciated matrix and indicate a second, post-metamorphism shock event.

Buchanan, Paul C.↗

A Novel Microcharacterization Technique in the Measurement of Strain and Orientation Gradient in Advanced Materials

Representation of morphology and evolution of the microstructure during processing and their relation to properties requires proper experimental techniques. Residual strains, lattice distortion, and texture (micro-texture) at the interface and the matrix of a layered structure or a functionally gradient material and their variation are among parameters important in materials characterization but hard to measure with present experimental techniques. Current techniques available to measure changes in interred material parameters (residual stress, micro-texture, microplasticity) produce results which are either qualitative or unreliable. This problem becomes even more complicated in the case of a temperature variation. These parameters affect many of the mechanical properties of advanced materials including stress-strain relation, ductility, creep, and fatigue. A review of some novel experimental techniques using recent advances in electron microscopy is presented here to measure internal stress, (micro)texture, interracial strength and (sub)grain formation and realignment. Two of these techniques are combined in the chamber of an Environmental Scanning Electron Microscope to measure strain and orientation gradients in advanced materials. These techniques which include Backscattered Kikuchi Diffractometry (BKD) and Microscopic Strain Field Analysis are used to characterize metallic and intermetallic matrix composites and superplastic materials. These techniques are compared with the more conventional x-ray diffraction and indentation techniques.

Garmestai, H.↗

Evidence for Subsolidus Metasomatism in the Eucrite Parent Body

The eucrite parent body (4Vesta) was continuously and rapidy resurfaced by basaltic lavas that formed the non-cumulate eucrites. Ophitic and variolitic textures have been preserved even though eucrites exhibit varying degrees of equilibration based on the extent of thermal metamorphism. Types range from least metamorphosed (type 1) to most metamorphosed (type 7) based in part on the interpretation of textures and compositional zoning profiles within pigeonitic pyroxenes. To provide constraints on the source and duration of the heating event responsible for metamorphism we have investigated primary and secondary textural and compositional relations in noncumulate eucrites with emphasis on subsolidus textures developed in pyroxenes. We have studied examples of most metamorphic types including Pasamonte (type 2) Stannern (4), Nuevo Laredo (4), Juvinas (5), Lakangaon (5), Millbillillie (6), Palo Blanco Creek (7), Jonzac (7), Haraiya (7), along with the cumulate eucrites Moama and Moore County.

McCallum, I. Stewart↗

Transmission Electron Microscopy of Iron Metal in Almahata Sitta Ureilite

Almahata Sitta (AS) is a polymict breccia mainly composed of variable ureilite lithologies with small amounts of chondritic lithologies [1]. Fe metal is a common accessory phase in ureilites, but our earlier study on Fe metals in one of AS fragments (#44) revealed a unique mineralogy never seen in other ureilites [2,3]. In this abstract we report detailed transmission electron microscopy (TEM) on these metal grains to better understand the thermal history of ureilites. We prepared FIB sections of AS#44 by JEOL JIB-4000 from the PTS that was well characterized by SEM-EBSD in our earlier study [2]. The sections were then observed by STEM (JEOL JEM- 2100F). One of the FIB sections shows a submicron-sized symplectic intergrown texture composed of Fe metal (kamacite), Fe carbide (cohenite), Fe phosphide (schreibersite), and Fe sulfide (troilite). Each phase has an identical SAED pattern in spite of its complex texture, suggesting co-crystallization of all phases. This is probably caused by shock re-melting of pre-existing metal + graphite to form a eutectic-looking texture. The other FIB section is mostly composed of homogeneous Fe metal (93 wt% Fe, 5 wt% Ni, and 2 wt% Si), but BF-STEM images exhibited the presence of elongated lathy grains (approx. 2 microns long) embedded in the interstitial matrix. The SAED patterns from these lath grains could be indexed by alpha-Fe (bcc) while interstitial areas are gamma-Fe (fcc). The elongated alpha-Fe grains show tweed-like structures suggesting martensite transformation. Such a texture can be formed by rapid cooling from high temperature where gamma-Fe was stable. Subsequently alpha-Fe crystallized, but gamma-Fe remained in the interstitial matrix due to quenching from high temperature. This scenario is consistent with very rapid cooling history of ureilites suggested by silicate mineralogy.

Mikouchi, T.↗

Integration of Product, Package, Process, and Environment: A Food System Optimization

The food systems slated for future NASA missions must meet crew nutritional needs, be acceptable for consumption, and use resources efficiently. Although the current food system of prepackaged, moderately stabilized food items works well for International Space Station (ISS) missions, many of the current space menu items do not maintain acceptability and/or nutritive value beyond 2 years. Longer space missions require that the food system can sustain the crew for 3 to 5 years without replenishment. The task "Integration of Product, Package, Process, and Environment: A Food System Optimization" has the objective of optimizing food-product shelf life for the space-food system through product recipe adjustments, new packaging and processing technologies, and modified storage conditions. Two emergent food processing technologies were examined to identify a pathway to stable, wet-pack foods without the detrimental color and texture effects. Both microwave-assisted thermal sterilization (MATS) and pressure-assisted thermal stabilization (PATS) were evaluated against traditional retort processing to determine if lower heat inputs during processing would produce a product with higher micronutrient quality and longer shelf life. While MATS products did have brighter color and better texture initially, the advantages were not sustained. The non-metallized packaging film used in the process likely provided inadequate oxygen barrier. No difference in vitamin stability was evident between MATS and retort processed foods. Similarly, fruit products produced using PATS showed improved color and texture through 3 years of storage compared to retort fruit, but the vitamin stability was not improved. The final processing study involved freeze drying. Five processing factors were tested in factorial design to assess potential impact of each to the quality of freeze-dried food, including the integrity of the microstructure. The initial freezing rate and primary freeze drying temperature and pressure were linked to final product quality in freeze-dried corn, indicating processing modifications that could lead to improved product shelf life. Storage temperatures and packaging systems were also assessed for the impact to food quality. Reduced temperature storage had inconclusive impact to the progression of rancidity in butter cookies. Frozen storage was detrimental to fruit and vegetable textural attributes but refrigerated storage helped to sustain color and organoleptic ratings for plant-based foods. With regard to packaging systems, the metallized film overwrap significantly decreased the progression of the rancidity of butter cookies as compared to the highest barrier non-metallized film. The inclusion of oxygen scavengers resulted in noticeable moisture gains in butter cookies over time, independent of packaging film systems. Neither emergent processing technology nor the freeze dry optimization resulted in compelling quality differences from current space food provisions such that a five-year shelf life is likely with these processing changes alone. Using a combination of refrigeration and PATS processing is expected to result in organoleptically-acceptable fruit quality for most fruits through five years. The vitamin degradation will be aided somewhat by the cold temperatures but, given the labile nature of vitamin C, a more stable fortification method, such as encapsulation, should also be investigated to ensure vitamin delivery throughout the product life. Similarly, significant improvement to the packaging film used in the MATS processing, optimization of formulation for dielectric properties, vitamin fortification, and reduced temperature storage should be investigated as a hurdle approach to reach a five year shelf life in wet-pack entrees and soups. Baked goods and other environmentally-sensitive spaceflight foods will require an almost impenetrable barrier to protect the foods from oxygen and moisture ingress but scavengers and reduced storage temperature did not improve baked good shelf life and are not recommended at this time for these foods.

Cooper, Maya R.↗