Search NASA⌕ Search

SEARCH · Search NASA

Results for “FRACTURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Intense cyclic heating effects on thermo-fracture and thermal shock of solid tungsten and open-cell tungsten foam

Here we investigate here the effects of transient (cyclic) arc-jet plasma and laser heating on fracture behavior of W-foam and solid tungsten. The two key parameters that control the foam thermomechanical response are its density and mean cell size expressed in Pores Per Inch (PPI). Tungsten foam samples were fabricated with Chemical Vapor Deposition (CVD) with variety of PPI and relative density. These were tested under two types of qualitatively different conditions: (1) high-enthalpy arc-jet, and (2) high-power cyclic laser heating. None of the foam samples showed macroscopic through-thickness cracks. However, distributed micro-cracks were observed on ligaments and their triple junctions. Under the same loading conditions, W-foam and solid tungsten showed similar crack network pattern and characteristic length-scale. However, Crack Opening Displacement (COD) was twice as large in solid W as compared to W-foam. Foam samples that have been previously exposed to a low-pressure helium plasma showed significant changes in their surface forming nano-texture fuzz which was removed by subsequent testing in the arc-jet. Extensive fracture and re-crystallization were observed in the thin solid W disk that was fully-constrained from expansion. Thicker and fully-constrained solid W disks did not display recrystallization, grain growth, and extensive cracking. However, thicker disks that were free to expand showed some recrystallization and extensive through-thickness cracks due to less effective cooling and thus higher temperatures. Laser beam testing showed no visible damage formation at 0.19 GW/m 2 and 0.38 GW/m 2 for both low-density (23%) and high-density (43%) foams at low pulses (100-1000). Micro-cracks were observed after 10,000 pulses at 0.19 GW/m 2 in both foams, and in low-density foam after 100,000 at 0.38 GW/m 2 . The nature of thermomechanical damage in W-foam exposed to extreme power (GW/m 2 ) short-duration laser pulses was found to be qualitatively similar to that of high power (MW/m 2 ) long-duration arc-jet.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Molecular dynamics studies of helium bubble effects on grain boundary fracture vulnerabilities in an Fe 70 Ni 11 Cr 19 –1%H austenitic stainless steel

Comprehensive molecular dynamics tensile test simulations have been performed to study the delamination processes of seven different grain boundaries / cleavage planes (Σ1{111}, Σ3{111}, Σ5{100}, Σ7{111}, Σ9{411}, Σ11{311}, and R{100}/{411}) containing a helium bubble. Combinations of a variety of conditions are explored including different strain rates, system dimensions, bubble density, bubble radius, bubble pressure, and temperature. We found that in general, grain boundaries absorb less energies with decreasing strain rate but increasing bubble areal density, bubble pressure, bubble radius, and temperature. The propensity of grain boundary delamination is sensitive to grain boundary type: The random grain boundary R{100}/{411} is one of the most brittle boundaries whereas the Σ1{111} cleavage plane and the Σ3{111} twin boundary are two of the toughest boundaries. The sorted list of grain boundary fracture vulnerability obtained from our dynamic tensile test simulations differs from the one obtained from our decohesion energy calculations, confirming the important role of plastic deformation during fracture. Finally, detailed mechanistic analyses are performed to interpret the simulated results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mapping of fracture and ionic conductivity changes in ion implanted solid electrolytes: Insights from molecular dynamics

Ion implantation emerges as a promising technique to address the persistent challenge of lithium (Li) filament growth in solid-state electrolytes as it can induce compressive stresses inhibiting crack growth and deflect dendrites, de facto mitigating early electrolyte failure. In this study, we examine the potential paradox of ion implantation: while aiming to enhance electrolyte performance, the radiation damage associated with implantation might inadvertently compromise both the ionic conductivity and the intrinsic fracture toughness of the material, rendering the material unsuitable for battery applications. Specifically, we employed molecular dynamics simulations to examine the scope of the downsides of ion implantation, specifically: (i) reduced ionic conductivity (due to radiation-induced amorphization) and (ii) mechanical stability (due to radiation-induced embrittlement) in ion-implanted Li 7 La 3 Zr 2 O 12 (LLZO) solid-state electrolytes. We explore how radiation damage impacts LLZO’s crystalline structure, Li-ion diffusion, and fracture properties at various temperatures and radiation damage levels. The study aims to provide insights into the competing effects of ion implantation and suggest potential engineering strategies for developing more robust solid-state electrolytes with improved conductivity and dendrite resistance.

Conductivity↗
DOE OSTI2018

Microstructure and fracture properties of open-cell porous Ti-6Al-4V with high porosity fabricated by electron beam melting

Highlights: • The Ti-6Al-4V foams with 80% high porosity are prepared by electron beam melting. • The ligament width appears to play the major role for mechanical properties. • The work of fracture is a linear function of ligament width and roughness/width ratio. - Abstract: The open-cell porous Ti-6Al-4V structure with high porosity, intended to be applied as replacement for human cancellous bone, were fabricated by electron beam melting (EBM). Computer aided design (CAD) was applied to design porous structures using the same unit cell with different unit cell sizes from 2.5 to 4 mm, different ligament widths from 600 to 900 μm, and different pore sizes from 1200 to 1800 μm, in order to achieve high porosity of 80% in avoiding the stress shielding effect. In comparison with the CAD designs and the EBM samples, there were minor discrepancies in terms of pore size and ligament width, mainly a result of melting pool. The measured data on the Young's modulus and yield strength of the EBM porous samples can be predicted by the Gibson and Ashby model. All samples with high porosity were found to match well with cancellous bone, with Young's modulus of 2 GPa and yield stress of 31 MPa, effective to diminish the risk of stress shielding effect. For porous EBM sample with high 80% porosity, the work of fracture can increase from 15.9 to 47.6 kJ/m{sup 2} with increasing ligament width from 600 to 900 μm.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An FFT-based micromechanical model for gradient enhanced brittle fracture

Damage models incorporated within FFT-based micromechanical methods have received much attention recently because of the need to better understand and predict brittle and ductile fracture. An important aspect of a damage model is non-local regularization, which removes the mesh dependence of the predictions that otherwise become physically unacceptable upon grid refinement. In this work, the Helmholtz-type equation for non-local gradient regularization of a damage model on a distorted grid is solved using an FFT-based approach. Further, the resulting system of equations is solved using the Jacobi iterative method. The model is applied to simulate brittle fracture of an intermetallic. The influence of the time and space discretization, the length-scale parameter, and intermetallic crystallographic orientation on crack evolution is studied.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Implications of post-processing induced microstructural changes on the deformation and fracture response of additively manufactured Ti–6Al–4V

Ti–6Al–4V parts fabricated via electron beam melting (EBM) powder bed fusion are often subjected to hot isostatic pressing below the β-transus temperature to mitigate defects. During which the pressure aids in pore closure and the thermal exposure results in coarsening of α phase while retaining the columnar prior-β phase grain morphology present in the as-fabricated condition. The same post-processing treatment can also be carried out above β-transus temperature which is an effective way to modify both the grain morphology and the associated α textures. Here, the objective of this work is to correlate thermally induced microstructural changes to the deformation and fracture response of the EBM processed Ti–6Al–4V. To this end, we have carried out both sub-transus and super-transus heat-treatments of the as-fabricated material. The mechanical response of the as-fabricated and all heat-treated materials are characterized by in-situ tensile tests under a high-resolution digital optical microscope. This enabled us to capture large-scale panoramic images of the deforming microstructure, and overcome the trade-off between the image resolution and the field of view during in-situ experiments. The series of images captured throughout the imposed deformation are subsequently used to perform microstructure-based digital image correlation to measure microstructural-scale strains over a large area. The results of the in-situ tests together with detailed fractographic analyses are then used to elucidate how the heterogeneous deformation spanning over multiple microstructural length-scales, for example, at the scale of lamellae, colonies of lamellae and grain boundaries, affect the overall deformation and fracture response of the post-processed materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Evaluating Fracture Behavior of Bioinspired Alumina-YSZ Composites through Static and Dynamic Mechanical Testing

Ceramic materials are known for their high hardness and strength but are limited by low toughness and sudden failure. Inspired by the microstructure of dental enamel, which features undulating rods that promote crack deflection and energy absorption, architected specimens were designed and manufactured. A bespoke ball-on-ring (BoR) testing apparatus measured the static biaxial rupture strength of these bioinspired materials. Additionally, impact testing with spherical steel projectiles assessed their behavior under dynamic conditions. Monolithic alumina specimens were compared to architected alumina reinforced with yttria-stabilized zirconia (YSZ) rods produced via direct ink write 3D printing. BoR tests revealed that monolithic alumina had a Weibull modulus of 10.53 and a characteristic strength of 372.3 MPa, while the composite specimens showed a Weibull modulus of 5.46 and a characteristic strength of 213.3 MPa. Although the composite failed at lower stresses and projectile velocities, it exhibited notable crack deflection and fracture resistance, with cracks being effectively interrupted by the rod inclusions. The composite specimens also resulted in fewer and larger fragments upon impact. Finite element simulations confirmed the effectiveness of the rod structures in enhancing fracture resistance.

Bioinspired materials↗
DOE OSTI2016

Finite element model for brittle fracture and fragmentation

A new computational model for brittle fracture and fragmentation has been developed based on finite element analysis of non-linear elasticity equations. The proposed model propagates the cracks by splitting the mesh nodes alongside the most over-strained edges based on the principal direction of strain tensor. To prevent elements from overlapping and folding under large deformations, robust geometrical constraints using the method of Lagrange multipliers have been incorporated. In conclusion, the model has been applied to 2D simulations of the formation and propagation of cracks in brittle materials, and the fracture and fragmentation of stretched and compressed materials.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Finite domain solution of a KGD hydraulic fracture in the viscosity-dominated regime

This paper describes a numerical algorithm for solving the classic problem of a plane strain (KGD) fracture propagating in an impermeable elastic medium with zero toughness. The method, which takes advantage of the self-similar nature of the solution, combines a domain-based scheme to solve the elasticity equations and a finite volume method to solve the nonlinear lubrication equation. This work represents a first step towards developing a model able to account for pore pressure diffusion in the medium and corresponding poroelastic effects, noting that these processes are more efficiently solved using a domain-based rather than a boundary integral method. To enhance the efficiency and accuracy of the numerical scheme, the far-field crack asymptotics is embedded in the discretized elastic relationship between the fluid pressure and the crack opening, while the coupled fluid-solid tip asymptote is enforced in a weak form when solving the nonlinear lubrication equation. The proposed technique yields results that closely match the analytical solution, even with a coarse mesh. This approach offers potential for addressing more complex hydraulic fracturing problems in the future.

Domain-based method↗
DOE OSTI2022

The mechanical behavior of metal-halide perovskites: Elasticity, plasticity, fracture, and creep

Wide ranging mechanical properties — elasticity, plasticity, fracture, and creep — most relevant to the mechanical reliability of perovskite solar cells (PSCs) are systematically investigated. High quality bulk single-crystals of the commonly studied metal-halide perovskites (MHPs) relevant to PSCs are fabricated and studied: CH 3 NH 3 PbBr 3 (MAPbBr 3 ) and CH 3 NH 3 PbI 3 (MAPbI 3 ). The first direct measurement of MHP Young's modulus (E) using uniaxial compression reveals E <100> of 13.1 ± 1.3 and 10.6 ± 1.0 GPa for MAPbBr 3 and MAPbI 3 , respectively. Further, the Vickers micro-hardness H (100) of MAPbBr 3 and MAPbI 3 is 0.54±0.02 GPa and 0.76±0.05 GPa, respectively. The Vickers micro-indentation fracture toughness K IC of MAPbBr 3 and MAPbI 3 is estimated at 0.20±0.03 MPa∙m 0.5 and 0.18±0.03 MPa∙m 0.5 , respectively. The stress-exponent, n, extracted from nanoindentation creep data is ~8 and ~10 for MAPbBr 3 and MAPbI 3 , respectively. The trends in these properties are discussed. These properties are best estimates and are recommended for use in future mechanical behavior and reliability analyses of MHPs and PSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2011

Castagna, M., M. W. Becker, and A. Bellin (2011), Joint estimation of transmissivity and storativity in a bedrock fracture, Water Resour. Res., 47, W09504, doi:10.1029/2010WR009262.

The spatial variability of transmissivity (T) and storativity (S) in a sandstone bedding plane fracture was investigated through field and numerical hydraulic tomography experiments. Cross-hole pumping tests were conducted in a single subhorizontal bedrock fracture, thereby constraining the problem to two dimensions. A Bayesian method implementing pilot points was used to invert the drawdown, under the hypothesis that T and S are independent random space functions, where integral scale, mean, and variance of the random fields were parameters of inversion in addition to pilot point values. An ensemble of 20 Monte Carlo realizations was created for each model scenario. Inversion of the measured cross-hole drawdown resulted in spatially variable T and S fields. To determine the accuracy of the method, a suite of synthetic inversions modeled after the field site were also conducted. The synthetic experiments demonstrate that the assumed spatial structure of S influences the accuracy of both the T and S inversions. When the S field is spatially heterogeneous and is assumed to be heterogeneous in the inversion, a consistent representation of the T and S fields is obtained. When the S field is spatially heterogeneous but is assumed to be homogeneous in the inversion, a consistent representation of the T field is still obtained, but the S field is entirely misrepresented; if the S field is actually homogeneous but assumed to be heterogeneous, a poor representation of the T and S fields is obtained along with high uncertainty in the inversion statistics of confidence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Seismic Imaging of a Shale Landscape Under Compression Shows Limited Influence of Topography–Induced Fracturing

We used seismic refraction to image the P-wave velocity structure of a shale watershed experiencing regional compression in the Valley and Ridge Province (USA). From estimates showing strong compressional stress, we expected the depth to unweathered bedrock to mirror the hill-valley-hill topography (“bowtie pattern”) by analogy to seismic velocity patterns in crystalline bedrock in the North American Piedmont that also experience compression. Previous researchers used failure potentials calculated for strong compression in the Piedmont to suggest fractures are open deeper under hills than valleys to explain the “bowtie” pattern. Seismic images of the shale watershed, however, show little evidence of such a “bowtie.” Instead, they are consistent with weak (not strong) compression. Here, this contradiction could be explained by the greater importance of infiltration-driven weathering than fracturing in determining seismic velocities in shale compared to crystalline bedrock, or to local perturbations of the regional stress field due to lithology or structures.

58 GEOSCIENCES↗
DOE OSTI2022

Barometric Pumping Through Fractured Rock: A Mechanism for Venting Deep Methane to Mars' Atmosphere

Abstract Both the source of methane on Mars and the mechanism for transmission from the subsurface to the atmosphere are not fully understood. Previous seepage simulations have invoked relatively shallow subsurface sources to explain observed methane signatures on Mars. We propose that barometric‐pressure pumping through fracture networks could be an effective mechanism for methane transport from the deep subsurface on Mars. Using atmospheric pressure data gathered by Curiosity as input, we simulate methane gas transport from depths of 200 m to the surface. Even with such a deep source, our model reproduces the observed seasonality of methane, and the simulated surface methane fluxes fall within the range of previous estimates derived from atmospheric observations. Because 200 m is the likely minimum hospitable depth for living methanogenic microbes, our fracture network model indirectly reinvigorates the possibility of a microbial source of methane on Mars.

58 GEOSCIENCES↗
DOE OSTI2011

Ozone generation by rock fracture: Earthquake early warning?

We report the production of up to 10 ppm ozone during crushing and grinding of typical terrestrial crust rocks in air, O{sub 2} and CO{sub 2} at atmospheric pressure, but not in helium or nitrogen. Ozone is formed by exoelectrons emitted by high electric fields, resulting from charge separation during fracture. The results suggest that ground level ozone produced by rock fracture, besides its potential health hazard, can be used for early warning in earthquakes and other catastrophes, such as landslides or land shifts in excavation tunnels and underground mines.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2013

Hardness-based plasticity and fracture model for quench-hardenable boron steel (22MnB5)

A comprehensive strain hardening and fracture characterization of different grades of boron steel blanks has been performed, providing the foundation for the implementation into the modular material model (MMM) framework developed by Volkswagen Group Research for an explicit crash code. Due to the introduction of hardness-based interpolation rules for the characterized main grades, the hardening and fracture behavior is solely described by the underlying Vickers hardness. In other words, knowledge of the hardness distribution within a hot-formed component is enough to set up the newly developed computational model. The hardness distribution can be easily introduced via an experimentally measured hardness curve or via hardness mapping from a corresponding hot-forming simulation. For industrial application using rather coarse and computationally inexpensive shell element meshes, the user material model has been extended by a necking/post-necking model with reduced mesh-dependency as an additional failure mode. The present paper mainly addresses the necking/post-necking model.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Controlled exfoliation of (100) GaAs-based devices by spalling fracture

The importance of exfoliation techniques increases as the semiconductor industry progresses toward thinner devices as a way to reduce material costs and improve performance. Here, the controlled spalling technique is a recently developed substrate removal process that utilizes the physics of fracture to create wafer cleavage parallel to the surface at a precise depth. In this letter, we apply principles of linear elastic fracture mechanics to predict the process conditions needed to exfoliate (100) GaAs of a desired thickness. Spalling can be initiated in a controllable manner, by depositing a stressor film of a residual stress value just below the threshold value to induce a spontaneous spall. Experimental data show process window requirements to controllably spall (100) GaAs. Additionally, experimental spall depth in (100) GaAs compares well to spalling mechanics predictions when the effects of wafer thickness and modulus are considered. To test spalled material quality, III-V single junction photovoltaic devices are lifted off of a (100)-GaAs substrate by spalling methods and electrical characteristics are recorded. No degradation is observed in the spalled device, illustrating the potential of this method to rapidly produce thin, high quality devices.

14 SOLAR ENERGY↗
DOE OSTI2016

The effect of Si content on the fracture toughness of CrAlN/Si{sub 3}N{sub 4} coatings

CrAlN/Si{sub 3}N{sub 4} nanocomposite coatings with different Si contents were deposited to understand how Si influences the microstructure and mechanical behaviour of the coatings, in particular, the fracture toughness. The coating composition, chemical bonding, microstructure, and mechanical properties were studied by energy dispersive spectroscopy, x-ray photoelectron spectroscopy, x-ray diffraction, and nanoindentation, respectively. Using a micro double cantilever beam sample, it was found that the fracture toughness of CrAlN/Si{sub 3}N{sub 4} coatings was higher than that of both the CrN and CrAlN coatings and increased with increasing Si content. Cross-sectional transmission electron microscopy suggested that this was caused by the suppression of cracking at columnar boundaries.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Fracture and fatigue of thin crystalline SrTiO 3 membranes

The increasing availability of a variety of two-dimensional materials has generated enormous growth in the field of nanoengineering and nanomechanics. Recent developments in thin film synthesis have enabled the fabrication of freestanding functional oxide membranes that can be readily incorporated in nanomechanical devices. While many oxides are extremely brittle in bulk, recent studies have shown that, in thin membrane form, they can be much more robust to fracture as compared to their bulk counterparts. Here, we investigate the ultimate tensile strength of SrTiO 3 membranes by probing freestanding SrTiO 3 drumheads using an atomic force microscope. We demonstrate that SrTiO 3 membranes can withstand an elastic deformation with an average strain of ~6% in the sub-20 nm thickness regime, which is more than an order of magnitude beyond the bulk limit. Further, we also show that these membranes are highly resilient upon a high cycle fatigue test, surviving up to a billion cycles of force modulation at 85% of their fracture strain, demonstrating their high potential for use in nanomechanical applications.

36 MATERIALS SCIENCE↗