Search NASA⌕ Search

SEARCH · Search NASA

Results for “Padding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,693 records · Page 94

Transient two-dimensional heat transfer through a composite body with application to deicing of aircraft components

Nine different numerical methods are examined for their ability to model the process of the melting and removal of ice from an airfoil using electrothermal heaters. A technique is presented for modeling the phase change which assumes a phase for each node. The technique allows solvers such as Alternating Direction Implicit, Alternating Direction Explicit, and Strongly Implicit Procedure to find a solution which can then be iterated to find the correct phase of each node. Comparisons made for a standard deicer pad comprised of five layers showed the ADI method to be superior to the other methods considered.

Wright, W. B.↗

Space Station pressure wall repair techniques

Space Station components are susceptible to hypervelocity impact damage from orbital debris and meteoroids. An especially vulnerable and critical space station component is the module pressure wall. Even with shielding, sufficiently large impacting particles can create penetrations ranging from pinholes to large jagged holes. This paper describes pressure wall damage repair patches along with procedures and tools for performing the repair. One patch incorporates an aluminum foil protected from the jagged hole edge with a Kevlar or foam pad. An adhesive holds the patch in place. Another patch uses a stiff plate held away from the damaged area by a low durrometer rubber ring which also seals the plate edge. An adhesive will also secure this patch in place. Procedures were developed to prepare the punctured wall surface and apply the patch under weightless and unpressurized conditions. The procedures were tested in a laboratory and in the MSFC Neutral Buoyancy Simulator with models of the patches and tools.

Gibbins, Martin N.↗

X-ray performance of the LAMAR protoflight mirror

A grazing incidence X-ray mirror in the Kirkpatrick-Baez geometry was constructed and tested. Its geometric aperture measures 20 by 30 cm and its length is 100 cm. The focal length is 3.4 m measured from the front to the focal plane. It is the first of eight mirrors to be built for the LAMAR experiment of the Shuttle High Energy Astrophysics Laboratory. Its angular resolution was measured at 1.5 and 6.4 keV in a quasi-parallel X-ray beam at the Marshall Space Flight Center. The half-power width (HPW) of the resolution function projectd along a horizontal axis is 31-sec of arc at both energies and in visible light. With the addition of small isolation pads the mirror is able to withstand the vibration and acceleration levels of a Space Shuttle launch. The resolution remains under 35-sec of arc HPW for changes in temperature of 9.5 C and when a modest temperature gradient is imposed on the mirror.

Fabricant, Daniel G.↗

Modal attenuation in multilayered coated waveguides

Propagation and attenuation constants of low-order normal modes in a circular waveguide lined with lossy coating layers are calculated using a generalized dispersion equation. It is found that the use of multilayered coating can significantly enhance modal attenuations over a broader frequency range compared to that for a single-layer coated structure. For a cylinder with radius a = 2 lambda, the attenuation constants for the dominant modes are shown to increase by 20 dB per a by adding a lossless padding layer to a lossy magnetic coating. Application of this result in radar cross-section (RCS) reduction is discussed.

Chou, Ri-Chee↗

Lessons learned in ground processing scientific and applications payloads at Kennedy Space Center

The payload ground processing of experiments which flew on the Shuttle is examined, including studies of atmosphere and earth observation, life science, advance technology, materials science, plasma physics, astrophysics and solar physics, astronomy, navigation and communication, and fluid mechanics. The process of designing and development payloads, the integration of instruments, carrier interface verification, and late servicing at the launch pad are discussed. The problems of cost, red tape, contamination, safety, and propriety protection are considered.

Elfrey, Priscilla↗

Unique cryogenic features of the Gravity Probe B (GP-B) experiment

Cryogenic designs to simplify launch-pad operations for the Gravity Probe B experiment (an orbital test of Einsteins's general theory of relativity using gyroscopes) while achieving an orbital lifetime of two years are discussed. The proposed system allows the probe to be loaded into a cold dewar, provides good structural support and thermal contact after insertion, and eliminates the need for a pumping system during ground hold. The use of a gamma alumina/epoxy minimizes the parasitic heat loads into the dewar through the telescope aperture and the tank supports.

Parmley, Richard T.↗

Thermal Stresses In Space-Shuttle Wing

Combined thermal deformations of wing-skin panel and TPS would not tear SIP layer. Report presents analysis of thermal stresses induced in skin panel, thermal-protection system (TPS), and strain-isolation pad (SIP) of Space Shuttle orbiter. Purpose of analysis to determine whether any part of above mentioned structures overstressed and overdeformed under reentry heating, assuming one TPS tile lost at end of reentry heating.

Ko, William L.↗

Robot Hand Grips Cylinders Securely

Jaws and linkage accommodate various sizes. Robot hand includes two pairs of parallel jaws that grasp rods, pipes, tubes, struts, and other long, heavy cylindrical objects. Hand features compact rotary drive and butterfly configuration simplifying approach and gripping maneuvers of robot. Parallelogram linkages maintain alignment of each jaw with other jaws. One bar of each linkage connected to one of two concentric, counterrotating shafts; rotation of shafts moves jaws in each pair toward or away from each other to grasp or release workpiece. Each jaw includes rigid gripping pad lined with rubber to give firm grip and to prevent damage to workpiece. Inner cylindrical surface (corner) of each jaw tapers off to flat sides. Enables jaw to grasp workpieces with diameters larger than or equal to twice the corner radius.

Parma, George F.↗

Tool Distributes Clamping Load

Tool distributes clamping load stably and fairly evenly among five clamping feet. Designed to stabilize and even out pressure applied to foam pads during bonding and also used in other situations where necessary to maintain fairly even clamping loads during fabrication processes. Five clamping feet, four of which adjustable, distribute clamping load and maintain clamping configuration during adhesive bonding or similar fabrication process. Used to clamp nonflat as well as flat surfaces.

Spencer, Barry Wayne↗

Space Station Freedom Solar Array design development

The Space Station Freedom Solar Array Program is required to provide a 75 kW power module that uses eight solar array (SA) wings over a four-year period in low Earth orbit (LEO). Each wing will be capable of providing 23.4 kW at the 4-year design point. Lockheed Missles and Space Company, Inc. (LMSC) is providing the flexible substrate SAs that must survive exposure to the space environment, including atomic oxygen, for an operating life of fifteen years. Trade studies and development testing, important for evolving any design to maturity, are presently underway at LMSC on the flexible solar array. The trade study and development areas being investigated include solar cell module size, solar cell weld pads, panel stiffener frames, materials inherently resistant to atomic oxygen, and weight reduction design alternatives.

Winslow, Cindy↗

Knowledge based and interactive control for the Superfluid Helium On-orbit Transfer Project

NASA's Superfluid Helium On-Orbit Transfer (SHOOT) project is a Shuttle-based experiment designed to acquire data on the properties of superfluid helium in micro-gravity. Aft Flight Deck Computer Software for the SHOOT experiment is comprised of several monitoring programs which give the astronaut crew visibility into SHOOT systems and a rule based system which will provide process control, diagnosis and error recovery for a helium transfer without ground intervention. Given present Shuttle manifests, this software will become the first expert system to be used in space. The SHOOT Command and Monitoring System (CMS) software will provide a near real time highly interactive interface for the SHOOT principal investigator to control the experiment and to analyze and display its telemetry. The CMS software is targeted for all phases of the SHOOT project: hardware development, pre-flight pad servicing, in-flight operations, and post-flight data analysis.

Castellano, Timothy P.↗

CMOS Process Monitor

A CMOS Process Monitor, consisting of eight basic test structures, has been prepared to acquire key CMOS parameters to assist in VLSI wafer acceptance. The test structures can be probed using a 2 by N probe pad array and can be arranged to fit into either the interior or the scribe lane of an integrated circuit chip. In order to facilitate the general use of the monitor, a document is being prepared that describes its design, layout, measurement, and analysis. This paper describes the structures included in the monitor, the methodology used to create the monitor, and test results from the monitor.

Buehler, M. G.↗

Mechanical pumps for superfluid helium transfer in space

Two alternate mechanical pump concepts have been identified for the transfer of superfluid helium in space. Both pumps provide flow at sufficient head and have operating characteristics suitable for the Space Infrared Telescope Facility (SIRTF) refill mission. One pump operates at a relatively low speed and utilizes mechanical roller bearings, while the other operates at a higher rotational speed using either electromagnetic or tilting pad gas-dynamic bearings. The use of gas bearings requires transfer of normal helium so that the gas pressure within the pump casing is high enough to operate the bearings. The operating characteristics of both pumps are predicted, the dimensions are estimated and major technology issues are identified. The major issues for each pump design are cavitation performance and bearing development. Roller bearings require quantified reliability for operation in space while electromagnetic bearings require basic development as well as a complex control system. The low speed pump has significantly poorer hydraulic efficiency than the high speed pump.

Izenson, M. G.↗

Predicting Pressure Drop In Porous Materials

Theory developed to predict drop in pressure based on drag of individual fibers. Simple correlation method for data also developed. Helps in predicting flow characteristics of many strain-isolation pad (SIP) glow geometries in Shuttle Orbiter tile system. Also helps in predicting venting characteristics of tile assemblies during ascent and leakage of hot gas under tiles during descent. Useful in study of mechanics of flows through fibrous and porous media, and procedures applicable to purged fiberglass insulation, dialysis filters, and other fibrous and porous media.

Lawing, Pierce L.↗

Magnetically-Guided Penetrant Applicator

Small wheeled vehicle moved inside nonmagnetic enclosure. Miniature magnetically guided truck uses foam-rubber sponge pads to apply penetrant fluid for inspection of welds in hidden surfaces of nonmagnetic tubes. Risk of explosion less than if electric motor used to drive vehicle. Inexpensive to make and made in range of sizes.

Molina, Orlando G.↗

Civil Applications For New V/STOL and STOL Aircraft

New designs offer benefits in congested urban areas and remote regions. Report explores potential uses in civil aviation of advanced rotorcraft, vertical/short-takeoff-and-landing (V/STOL) aircraft, and short-takeoff-and-landing (STOL) aircraft. Future opportunities overcome formidable geographic barriers and lack of major airport facilities, bringing fast, flexible transportation to remote areas. Aircraft relieves congestion at airports in densely populated areas by utilizing pads and short runways without interfering with large-air-carrier traffic.

Albers, James A.↗

Hydromechanical Advanced Coal Excavator

Water-jet cutting reduces coal dust and its hazards. Advanced mining system utilizes full-face, hydromechanical, continuous miner. Coal excavator uses high-pressure water-jet lances, one in each of cutting heads and one in movable lance, to make cuts across top, bottom and middle height, respectively, of coal face. Wedge-shaped cutting heads advance into lower and upper cuts in turn, thereby breaking coal toward middle cut. Thrust cylinders and walking pads advance excavator toward coal face.

Estus, Jay M.↗

Low Earth Orbit Raider (LER) winged air launch vehicle concept

The need to launch small payloads into low earth orbit has increased dramatically during the past several years. The Low Earth orbit Raider (LER) is an answer to this need. The LER is an air-launched, winged vehicle designed to carry a 1500 pound payload into a 250 nautical mile orbit. The LER is launched from the back of a 747-100B at 35,000 feet and a Mach number of 0.8. Three staged solid propellant motors offer safe ground and flight handling, reliable operation, and decreased fabrication cost. The wing provides lift for 747 separation and during the first stage burn. Also, aerodynamic controls are provided to simplify first stage maneuvers. The air-launch concept offers many advantages to the consumer compared to conventional methods. Launching at 35,000 feet lowers atmospheric drag and other loads on the vehicle considerably. Since the 747 is a mobile launch pad, flexibility in orbit selection and launch time is unparalleled. Even polar orbits are accessible with a decreased payload. Most importantly, the LER launch service can come to the customer, satellites and experiments need not be transported to ground based launch facilities. The LER is designed to offer increased consumer freedom at a lower cost over existing launch systems. Simplistic design emphasizing reliability at low cost allows for the light payloads of the LER.

Feaux, Karl↗